Wolf Pwc422418R Users Manual Web PWC422418

PWC422418(R) to the manual ab09ffee-4a91-24a4-e587-eee1f510e579

: Wolf Wolf-Pwc422418R-Users-Manual-477995 wolf-pwc422418r-users-manual-477995 wolf pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
Hand finished
craftsmanship

Classic stainless
steel finish

Welded seams and
hemmed edges

Decorative rail
(optional)

Backdraft damper
Model PWC422418

Stainless steel
baffle filters
Model PWC422418R
Rail Option

Recessed easyaccess controls

Location of
rating plate

Halogen lighting

Infinite-speed
blower control

Model PWC422418R shown with decorative rail

Wolf Pro wall chimney hoods are
available in the classic stainless steel
finish. Rail option hoods (R) come with a
classic stainless steel decorative rail and
stand-offs. Optional platinum or brass
rails match dual fuel range bezels. Pro
wall chimney hoods are sold as a shell
only, internal, in-line and remote blower
options are available.

Wolf Pro wall chimney hoods provide the ultimate
in ventilation. With standard elements like heat sentry
and dual setting halogen lighting, Wolf elevates the
need for ventilation to an enjoyable perk.
The Pro wall chimney hood installed with an optional
6" (152), 12" (305), 18" (457) or 24" (610) classic
stainless steel duct cover completes the chimney
design. With the Pro wall chimney hood you also have
the option of a decorative rail. While a classic stainless
steel rail is standard on the (R) model, platinum or
brass rails are also available to match the bezels of our
dual fuel ranges.
Pro wall chimney ventilation hoods are recommended
for use with all Wolf cooking appliances.

Dimensions in parentheses are in
millimeters unless otherwise specified.
6/07

1

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
F E AT U R E S

Classic stainless steel finish

Heat sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed

Optional 6" (152), 12" (305), 18" (457) and
24" (610) duct covers available to complete
the chimney design

Halogen lighting with two settings

Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels

Removable, dishwasher-safe, restaurantgrade stainless steel baffle filters and grease
cups
Transition with backdraft damper included

Internal, in-line and remote blower options

UL listed to US and Canadian safety
standards

Heavy-duty 16-gauge brushed stainless steel
construction

UL approved for covered outdoor applications

Stainless steel enclosed liner
Continually welded seams, hemmed edges
and sides and hand finished craftsmanship

Two and five year residential warranty –
exclusions apply; warranty information can
be found on our website, wolfappliance.com

Recessed easy access controls
Infinite speed blower control

OVERALL DIMENSIONS

13 1/2"

24" (610)
TOP WIDTH

(343)

18" (457)
OVERALL
HEIGHT
4" (102)

Model PWC422418

24" (610)
OVERALL DEPTH

42" (1067)
OVERALL WIDTH

13 1/2"

24" (610)
TOP WIDTH

(343)

3/4" (19)
DIAMETER
OF RAIL

18" (457)
OVERALL
HEIGHT
4" (102)
42" (1067)
OVERALL WIDTH

Model PWC422418R
with Rail
24" (610)
OVERALL DEPTH

2"
(51)

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

2

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
BLOWER OPTIONS

S P E C I F I C AT I O N S

600 CFM Internal Blower
as of Fall 2007

801644
801314

900 CFM Internal Blower
as of Fall 2007

801645
801315

1100 CFM In-Line Blower

808332

900 CFM Remote Blower

801641

1200 CFM Remote Blower

801642

1500 CFM Remote Blower

804701

Refer to Pro Ventilation Recommendations
at the end of this section.

Overall Width of Hood

42" (1067)

Overall Height of Hood

18" (457)

Overall Depth of Hood – PWC422418
PWC422418R (including rail)

24" (610)
26" (660)

Internal Blower Options
In-Line Blower Option
Remote Blower Options

1100 CFM
900, 1200 or 1500 CFM

Discharge

Vertical

Duct Size

10" (254) Round

Electrical Supply Requirements
ACCESSORIES

Platinum or brass decorative rail
and stand-offs

600 or 900 CFM

Shipping Weight (shell only)

110 / 120 V AC, 60 Hz
15 amp dedicated circuit
86 lbs (39 kg)

Specifications are subject to change without notice.

38" (965) high stainless steel
backsplash with warming racks
38" (965) high stainless steel
backsplash
6" (152), 12" (305), 18" (457) and
24" (610) duct covers
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Locator section of
our website, wolfappliance.com.

Dimensions in parentheses are in
millimeters unless otherwise specified.

3

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
I N S TA L L AT I O N S P E C I F I C AT I O N S

LOCATION OF 6"
ELECTRICAL (152)

E
5"
(127)

18" (457)
HEIGHT
OF HOOD

42" (1067)
WIDTH OF HOOD

30" TO 36"

30" TO 36"

(762–914)
TO COUNTERTOP

(762–914)
TO COUNTERTOP

24" (610)
DEPTH OF HOOD

NOTE: Pro wall chimney hoods have a vertical discharge.

DIMENSIONS

Overall Width of Hood

42" (1067)

Overall Height of Hood

18" (457)

Overall Depth of Hood (excluding rail)

24" (610)

Countertop to Bottom of Hood
Location of Electrical

30" (762) to 36" (914)
Within shaded area

See Installation Instructions shipped with unit for detailed specifications.

Dimensions in parentheses are in
millimeters unless otherwise specified.

4

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
I N S TA L L AT I O N N OT E S

Refer to the illustrations and specifications
for overall dimensions and installation specifics.

IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.

Wolf Pro wall chimney ventilation hoods are
recommended for use with any Wolf cooking
appliance, and should be as least as wide as
the cooking surface. It is recommended that the
hood overlap the cooking surface by 3" (76) on
either side.

Pro wall chimney hoods require a separate,
grounded 110/120 V AC, 60 Hz power supply.
The service should have its own 15 amp circuit
breaker. Placement of the electrical supply is
not critical, as long as you provide enough 120
V AC, 60 Hz power cable to make the electrical
connection. Locate electrical within the shaded
area shown in the Installation illustration.

Optional 6" (152), 12" (305), 18" (457) and
24" (610) duct covers are available as a sales
accessory to complete the chimney design.
Installation of all Pro wall chimney hoods
should be 30" (762) to 36" (914) from the
bottom of the hood to the countertop. Follow
the dimensions shown in the Installation
illustration.
Wolf Pro wall chimney hoods are shipped
without a blower assembly. Internal, in-line or
remote blower assemblies are available. Blower
options also vary with the volume of air that
needs to be moved and the length of the duct
run. Refer to page 8 for Pro Ventilation CFM
Recommendations and Blower Options.

Dimensions in parentheses are in
millimeters unless otherwise specified.

You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the installation instructions shipped
with each Wolf product for detailed specifications. This information can also be found on
our website, wolfappliance.com.

5

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
D U C T I N G C O N S I D E R AT I O N S

Wolf Pro wall chimney ventilation hoods are
shipped without the blower assembly. Internal,
in-line and remote blower assemblies are
available.
IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.
Wolf Pro wall chimney hoods have a vertical
discharge location with 10" (254) round duct.
A transition with backdraft damper is included.
The hood will operate most efficiently when
ductwork does not exceed 50' (15 m) in length.

Local building codes may require the use of
make-up air. Consult your local HVAC professional for specific requirements in your area.
IMPORTANT NOTE: Wolf Pro wall chimney
hoods must be vented to the outside. Use only
metal ductwork.
Refer to the illustration below for ducting
considerations for Pro wall chimney hoods.

Ducting for Pro wall
chimney hoods.
DUCTWORK INSTALLATION
THROUGH ROOF

ROOF CAP OR REMOTE BLOWER

10" (254) ROUND DUCT
TRANSITION
14"W x 9 3/4"D TO 10" ROUND
7"H (INCLUDING FLANGES)
SOFFIT OR CABINET
OR DUCT COVER
VERTICAL DISCHARGE

18" (457)
HEIGHT
OF HOOD

WALL HOOD

16 3/4" (425)
TOP OF WOOD
MOUNTING STRIP

24" (610)
DEPTH OF HOOD
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD

36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT

NOTE: VERTICAL DISCHARGE ONLY FOR PRO WALL CHIMNEY HOODS.

Dimensions in parentheses are in
millimeters unless otherwise specified.

6

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
WOLF BLOWER ASSEMBLIES

A ventilation system must include a blower
assembly. Wolf ventilation hoods are shipped
without the blower assembly. An internal, in-line
or remote blower assembly must be selected to
accommodate the cooking appliance, CFM
requirements and homeowner preferences.
Internal, in-line and remote blower assemblies
are available as sales accessories through your
Wolf dealer.

Internal blowers are mounted inside the hood
canopy. In-line blowers are mounted in between
the hood and the exterior of the home. Remote
blowers can be mounted on the roof or in some
cases, on an exterior wall. Refer to the illustrations below for dimensions of Wolf in-line and
remote blowers.
Pro ventilation recommendation charts on the
following page provide minimum CFM recommendations according to the cooking appliance
and ventilation hood used and blower options
for each specific Pro wall chimney hood.

IMPORTANT NOTE: Use only a Wolf blower
with all Wolf ventilation products.

24 7/8"
(632)

18"

12"

(457)

(305)

8"
(203)

22"

18"

(559)

(457)

In-line BLOWER-110IL

21" (533)

18" (457)
20 3/4"
(527)

28 1/4"
(718)

(254)

29 1/2"

(749)

10" (254)
Diameter

15 1/2"
24 1/2"
(622)

14"

14 3/4"

29 1/2"

(375)

(749)

24 3/4"
(629)

Remote BLOWER-90REM

14 3/4"

29 1/2"

(375)

(749)

(264)

(257)

4 3/4"
(121)

10" (254)
Diameter

10 3/8"

10 1/8"

(356)

(254)

29 1/2"

(749)

10" (254)
Diameter

(394)

10"

10"

22"
(559)

Remote BLOWER-120REM

7 1/4"
(184)

25"

7 1/4"

(635)

(184)

Remote BLOWER-150REM

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

7

Planning Information

Pro 42" (1067) Wall Chimney Hood
MODEL PWC422418(R)
P R O V E N T I L AT I O N C F M R E C O M M E N DAT I O N S

Pro Wall Chimney Hoods
Model

PWC362418

PWC422418

DF304 / R304 / SRT304

600

600

PWC482418

PWC542418

DF366 / R366 / SRT366 / RT366

900

900

DF364 / R364 / SRT364 / RT364

900

900

RT362
R488 / RT488

900

900
1100

1100

DF486 / R486 / SRT486 / RT486

1100

1100

DF484 / R484 / SRT484 / RT484

1100

1100

Minimum CFM requirements for Wolf ranges and rangetops. Additional CFM may be required for charbroilers, griddles
and long duct runs.

P R O V E N T I L AT I O N B L O W E R O P T I O N S

Pro Wall Chimney Hoods
Blower Description

Blower Number

Wall Chimney Hood Models

600 CFM Internal

CTBLOWER-60INT (801644 – 810314 as of Fall 2007)

PWC362418 / PWC422418

900 CFM Internal

CTBLOWER-90INT (801645 – 810315 as of Fall 2007)

PWC362418 / PWC422418

1200 CFM Internal

IBLOWER-120INT (804703 – 810317 as of Fall 2007)

PWC482418 / PWC542418

1100 CFM In-Line

BLOWER-110IL (808332)

All Pro Wall Chimney Hoods

900 CFM Remote

BLOWER-90REM (801641)

All Pro Wall Chimney Hoods

1200 CFM Remote

BLOWER-120REM (801642)

All Pro Wall Chimney Hoods

1500 CFM Remote

BLOWER-150REM (804701)

All Pro Wall Chimney Hoods

Dimensions in parentheses are in
millimeters unless otherwise specified.

8



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Create Date                     : 2007:07:02 14:52:37-05:00
Modify Date                     : 2007:07:02 14:52:37-05:00
Creator Tool                    : QuarkXPress: pictwpstops filter 1.0
Format                          : application/pdf
Creator                         : Jan Statz
Title                           : Web PWC422418
Document ID                     : uuid:cd4d7f15-28d5-11dc-9734-00039368bf8a
Instance ID                     : uuid:cd4d8889-28d5-11dc-9734-00039368bf8a
Page Count                      : 8
Author                          : Jan Statz

EXIF Metadata provided by EXIF.tools