Wonders Technology DS1591 Mini Speaker with Bluetooth User Manual DS 1591
Wonders Technology Co., Ltd. Mini Speaker with Bluetooth DS 1591
user manual
1
BLUETOOTH LED SPEAKER
DS-1591 Quick Guide
Product View
2
1.Power On/Off
2. Pause/ Unpair /Hands free
3. Volume Down
4. Volume Up
5. Light Intensity
6. AUX in Slot
7.Bluetooth mode indicator
8.USB charging Jack
Bluetooth Connection SetUp
1. Press the 3S to turn on the speaker. Enable bluetooth on your device and
choose from your list.
2. If prompted, Your speaker is connected .and the green light will change from
blue to light of seven colors.
3. Your speaker will automatically power off after 10 minutes of unpaired
inactivity
4. Once paired ,your speaker will power off if you pause the party for 15 minutes
or more.
Note: Press and Hold button to end the bluetooth connection between the
speaker and the devices.
Control Buttons
1. Press the button ,You can increase the volume。.
2.Press the button , You can decrease the volume 。
3. Press to play or pause the audio
4.When the speaker is connected , You can press the button to change the
light.
3
Hands-free Function
1. Press to answer/end the coming call.
2. Press and hold to end the coming call
Using AUX input
Requires a 3.5mm audio cable (Included).
1. Connect your audio device to the speaker
2. Speaker switches to Line In mode automatically. The Aux-in mode indicator
light turns to light of seven
3. Press the Vol-/+ button or native controls on the connected MP3 player to
control volume.
Charging
1,Charge 3hours for up 5 hours play time
Specifications
• Model No.: DS-1591
• Speaker size : 87 x87x43mm
• Bluetooth A2DP function
• Rechargeable Li-ion battery included
• Battery capacity: 3.7V 1400mAh
• Battery life: 4Hrs (Volume at 50%)
• Mini USB jack, power by USB cable (USB cable included)
• 3.5mm Aux jack for connection to other MP3, CD, Laptop…
• Output power: 1.5W X 2 (THD=10%)
• Working distance: ＜ 10 M
• Can be paired up to 6 mobile or audio players
4
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) This device may not cause harmful interference, and (2) this
device
must accept any interference received, including interference that may cause
undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed
and used in accordance with the instructions, may cause harmful interference to
radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.