Wonders Technology PS006 Bluetooth Speaker User Manual Espresso Quick Start Guide R6

Download:
Mirror Download [FCC.gov]
Document ID	2185556
Application ID	+oSYQXbYCfbgM/NuuVO5SQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.9kB (536250 bits)
Date Submitted	2014-02-10 00:00:00
Date Available	2014-02-10 00:00:00
Creation Date	2013-12-21 15:28:40
Producing Software	Adobe PDF library 10.01
Document Lastmod	2014-02-10 08:54:28
Document Title	Espresso Quick Start Guide R6
Document Creator	Adobe Illustrator CS6 (Macintosh)

WARNING
To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
CAUTION
Use of controls or adjustments of performance or procedures other than those specified may result in hazardous
radiation exposure. Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or the like.
UNPACKING AND INSTALLATION
Unpack your unit carefully. We recommend that yousave the packaging in case you ever need to store your unit.
To avoid damage, never place the unit or its batteries near radiators, in front of heating vents, under direct
sunlight or near water.
FOR YOUR SAFETY
• When disconnecting the power supply, pull the plug first. Do not pull the cord by itself.
• Never handle the power plug with wet hands, as this could cause fire or electric shock.
• Refer servicing to qualified personnel only.
• Do not open the housing.
• Do not twist or pinch the power supply cord. If the plug or power supply cord needs to be
replaced, ensure that it complies with the manufacturer’s recommendation.
• Unplug the unit during lightning storms and when unused for extended periods of time.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
DISPOSAL
According to the European WEEE Directive (2002/96/EC) and Battery Directive (2006/66/EC), all electrical and
electronic products and batteries must be collected separately by a local collection system. Do not dispose of
these items with your normal household waste. Follow local regulations for safe disposal.
The wheeled bin mark indicates that this product should not be disposed with other household
waste throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental safe recycling.
FCC RULES
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference
to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
This Class B digital apparatus complies with Canadian ICES-003.
WIRELESS BLUETOOTH SPEAKER
QUICK START GUIDE
Made by
Copyright © 2014 Disruptive Hong Kong Limited.
GEAR4 is a registered trademark of Disruptive Hong Kong Limited. All rights reserved.
BOX CONTENTS
Volume control
Espresso Bluetooth Speaker
Charging cable
Quick Start Guide
Use your Bluetooth device to adjust
the volume up or down.
OPERATING INSTRUCTIONS
LED Status and Modes
Handle clip
WI RE
LE SS
QUI
CK
BL UE
TO OT
H SP
EA KE
STAR
TG
UIDE
Blue LED flashes = Bluetooth Pairing
Solid Blue light = Paired
Solid Red light = Charging
LED off
= Fully charged
Pairing and Connecting to your Espresso Bluetooth speaker
1) Short Press
to turn on speaker. The speaker will automatically
enter pairing mode. Bluetooth indicator LED will flash blue.
2) Go to Bluetooth settings on your music device and connect to
“Espresso”. After connecting Bluetooth indicator LED will display
solid blue.
Note: If the Espresso is already connected to another Bluetooth device,
disconnect that device before connecting.
Charging your Espresso speaker
• Use the micro-USB cable to charge the speaker.
When charging the indicator LED will display solid red.
• When fully charged the red LED will turn off.
Press handle clip
to open, release
to close.
Power on/off
To turn Espresso
speaker on or off,
short press
GEAR4 One-Year Warranty
Disruptive Hong Kong Limited, trading as GEAR4, warrants this product to be free from defects in workmanship
and materials at the point of sale. Subject to this product being used in accordance with its instructions for use,
the product shall continue to be free from defects, for a period of one (1) year from the date of original purchase.
Any damage or defects caused by a failure to follow the instructions which relate to this product or as the result
of an accident, abuse, misuse, misapplication, product modification, faulty ancillary equipment, improper
voltage or current, lightning or other acts of God, commercial non-home use, normal wear and tear, shipping
damage or loss, damage to digital media players or damage caused by the actions of anyone other than
Disruptive Hong Kong Limited are expressly excluded from the warranty stated above.
Disruptive Hong Kong Limited will, at its sole election, repair or replace any product that proves to be defective
in either or both of workmanship or materials and as covered by this warranty. If the product is no longer
manufactured or is out of stock at or after the time Disruptive Hong Kong Limited learns of the warranty claim,
Disruptive Hong Kong Limited may, at its sole election, replace your product with a similar product.
Disruptive Hong Kong Limited’s liability is limited to the repair or replacement, of any defective product under
warranty and any incidental or consequential damages are expressly excluded to the fullest extent permitted
by law. This warranty is not transferable and does not extend to users other than the person who originally
purchased the product.
Nothing in this manual shall limit or exclude liability of Disruptive Hong Kong Limited for death or personal
injury resulting from Disruptive Hong Kong Limited’s negligence, for fraud or fraudulent misrepresentation or
breach of the terms implied by Section 12 of the Sale of Goods Act 1979.
This warranty gives you specific legal rights in addition to the ones afforded you by the laws of your country.
This warranty is not intended to operate to limit such legal rights.
Australian Consumer Law In Australia, the Trade Practices (Australian Consumer Law) Amendment Regulations
2010 (No. 1) apply. Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Return Policy / Warranty Service
Warranty claims will only be valid when proof of purchase is supplied to Disruptive Hong Kong Limited to
evidence that the product was purchased from an authorised Disruptive Hong Kong Limited dealer and that
the claim is within one (1) year of purchase. To make a warranty claim you must first contact Disruptive Hong
Kong Ltd, Rm 2002, 20/F King Palace Plaza , 52A Sha Tsui Road, Tsuen Wan, Hong Kong stating your name,
full postal address, contact telephone number, the name of the product and its serial number, date and place
of purchase and a detailed description of the problem you are experiencing.
If the defect is covered by this warranty then you will be provided with an authorisation number and
instructions for return shipment. Where possible, you must send to Disruptive Hong Kong Limited the
damaged or defective product. The returned product MUST be accompanied by the original proof of purchase.
We highly recommend that you retain a copy of this proof of purchase for your records.
Disruptive Hong Kong Limited shall not be responsible for lost or damaged products during shipment. Any
product returned without the original proof of purchase will be returned without being examined or tested
and such return shall be at the customer’s expense.
To avoid any additional charges, all returns and exchanges must include the original packing materials,
product box, all included accessories which may include, but not necessarily be limited to, power adapters
or power cords, connecting cables, remote controls, adapters, inserts, cards and instruction manuals. The
absence of any of the aforementioned items may mean that you incur a charge for their replacement.
Disruptive Hong Kong Limited shall not be liable for any indirect or direct consequential loss
For product support, visit: WWW.GEAR4.COM
Input: DC5V 500mA THIS ITEM IS NOT A TOY
Made in China
Model No: PS006
DS-1370
IC: XXXXX-PS006
FCC:XXXXXPS006

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00
Format                          : application/pdf
Title                           : Espresso Quick Start Guide R6
Metadata Date                   : 2014:02:10 08:54:28+08:00
Modify Date                     : 2014:02:10 08:54:28+08:00
Create Date                     : 2013:12:21 15:28:40Z
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 196
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 20244 bytes, use -b option to extract)
Instance ID                     : uuid:ba715219-ef66-4451-aed1-67e234848a74
Document ID                     : xmp.did:00D92607F02068118C14E8D9FBD67ECF
Original Document ID            : uuid:5B20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:bfcaf0cc-287f-e442-b3da-dc961cbe9b67
Derived From Document ID        : xmp.did:CCDE1E62412068118C14E8D9FBD67ECF
Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:F77F1174072068118083A7B8667D8CEE, xmp.iid:00D92607F02068118C14E8D9FBD67ECF
History When                    : 2012:07:10 17:31:52+01:00, 2013:12:21 15:28:35Z
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS6 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : /Volumes/Reedesigns/TO BURN : BURNT TO DVD/TO BURN/Gear 4/QUICKSTART GUIDE/Images/Placed Images/Cup.png
Startup Profile                 : Basic CMYK
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 239.999821
Max Page Size H                 : 79.999940
Max Page Size Unit              : Millimeters
Font Name                       : AvenirNextLTPro-Cn, AvenirNextLTPro-Regular, AvenirNextLTPro-It, AvenirNextLTPro-Demi, AvenirNextLTPro-DemiIt, KenyanCoffeeRg-Regular
Font Family                     : Avenir Next LT Pro, Avenir Next LT Pro, Avenir Next LT Pro, Avenir Next LT Pro, Avenir Next LT Pro, Kenyan Coffee
Font Face                       : Condensed, Regular, Italic, Demi, Demi Italic, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 1.100;PS 001.001;hotconv 1.0.38, Version 1.100;PS 001.001;hotconv 1.0.38, Version 1.100;PS 001.001;hotconv 1.0.38, Version 1.100;PS 001.001;hotconv 1.0.38, Version 1.100;PS 001.001;hotconv 1.0.38, Version 4.001
Font Composite                  : False, False, False, False, False, False
Font File Name                  : AvenirNextLTPro-Cn.otf, AvenirNextLTPro-Regular.otf, AvenirNextLTPro-It.otf, AvenirNextLTPro-Demi.otf, AvenirNextLTPro-DemiIt.otf, kenyan coffee rg.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, Cutter Guide
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Grays
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=0 M=0 Y=0 K=50
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 50.000000
Producer                        : Adobe PDF library 10.01
Has XFA                         : No
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : suzanna,
Bounding Box                    : 63 -764 789 -208
Container Version               : 9
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools