Wonders Technology SP-58031 Bluetooth Speaker User Manual DS 1168

Download:
Mirror Download [FCC.gov]
Document ID	2244515
Application ID	WVfCM26R58RBwYGHZb2s7w==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.83kB (447921 bits)
Date Submitted	2014-04-17 00:00:00
Date Available	2014-04-17 00:00:00
Creation Date	2013-08-17 10:55:50
Producing Software	Adobe PDF library 10.01
Document Lastmod	2013-08-17 10:55:50
Document Title	DS-1168 说明书
Document Creator	Adobe Illustrator CS6 (Windows)

IMPORTANT SAFETY INSTRUCTIONS
For the safety of you and Bluetooth® speaker, follow the
precautions below:
● Do not expose the unit to liquid, moisture or humidity to avoid the
product's internal circuit being affected.
● Do not use abrasive cleaning solvents to clean the unit.
● Do not expose the unit to extremely high or low temperature as this
will shorten the life of electronic devices, destroy the battery or
distort certain plastic parts.
● Do not dispose of the unit in fire as it will result in an explosion.
● Do not expose the unit to contact with sharp objects as this will
cause scratches and damage.
● Do not let the unit fall down onto the floor. The internal circuit might
get damaged.
● Do not attempt to disassemble the unit as it may get damaged if you
are not professional.
CAUTION: TO PREVENT THE RISK OF ELECTRlC SHOCK.
DO NOT DISASSEMBLE BODY
NO USER-SERVlCEABLE PARTS INSlDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC statements:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
TECHNICAL SPECIFICATION
Speaker battery: 3.7V 500mA Li-ion battery
Charging base battery: 3.7V 1020mA Li-ion battery
Charing base input: 5V 1A
Speaker size: 2” (5 cm)
Output power (speaker): 1.5W RMS
Net weight: 348 g
Cannot play
properly,
the music is
intermittent
TROUBLESHOOTING
Sound
distorted
Sound source is
distorted.
Check the volume setting
on both speaker and your
Bluetooth device and
adjust the volume to a
proper level.
Speaker
does not
power up
Low battery
Ensure the Power switch
at the bottom of the
speaker is switched on.
Ensure the speaker is fully
charged or you have
connected the speaker to
power source
Symptom
Cannot pair
successfully
Possible problem
Solution
Speaker not power on
or your bluetooth device
paired with other device,
or interference from
other bluetooth device
Check whether the speaker
is in power on and
searching mode. Check
whether there are too
many Bluetooth receivers
around your Bluetooth
device. Turnoff them to
avoid any interference and
pair again.
Bluetooth device and
speaker distance too
much far away,
Check whether the distance
between speaker and your
Bluetooth device is out of
its working distance, or
whether there are some
obstacles block the
streaming between speaker
and Bluetooth device.
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Warning: Modifications not approved by the party responsible for
compliance could void user’s authority to operate the equipment.
NOTE: This product has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If the product does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the product and receiver.
•Connect the product into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
DISCLAIMER
Updates to hardware components are made regularly. Therefore
some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation.
All item described in this guide for illustration purposes only and
may not apply to particular situation. No legal right or entitlements
may be obtained from the description made in this manual.
Box contents
CHARGING THE SPEAKER
1.Turn the switch to INPUT, then put the speaker on the power station
and connect the USB cable to a computer or a 5V/1A power
adaptor(power adaptor not included in packaging), the LED
indicator flash red and blue, after fully charged, LED will go to off.
Product Feature
If charge the power station only, switch to INPUT and LED flash
blue, after fully charged, LED will go to off.
Charing base
Bluetooth speaker
USB charging cable
A. Microphone
B. VolC. Handsfree
D. Vol+
E. LED indicator
F. Play/Pause
USB charging cable
User manual
G. Switch on/off
H. Aux in jack
I. Charing LED indicator
J. Charging plate
K. Charging mode switch
L. Micro USB port
If charge speaker by power station only, please switch to OUTPUT,
the LED indicator flash red and green, after fully charged,
LED flash green.
3.5 mm stereo audio cable
Swinton Avenue Trading, Inc.
Limited One (1) Year Product Warranty
United States and Canada
This Limited Warranty covers the original purchase of new product
used for normal commercial, personal or household use. Swinton
Avenue Trading, Inc. (SAT) warrants its products will be free from
defects in materials and workmanship (normal wear and tear
excepted), for ONE (1) YEAR from the original date of purchase,
except as provided below. If a defect exists, at its option SAT, will repair
or replace with a comparable product, free of charge, any product which
fails under normal use as a result of such defect. This warranty does
not apply to: (i) cosmetic damage, such as scratches, nicks and dents
or (ii) damage caused by water, fire, accident, negligence, abuse,
misuse, improper cleaning or other circumstances not directly
attributable to manufacturing defects.
Proof of purchase is required in the form of a receipt (a copy or a
original) to validate this Limited Warranty. If you do not have a copy
of your store receipt and paid using a check or a major credit card, a
copy can be obtained from
Office Depot’s receipt retrieval department at 1-800-721-6592.
If SAT chooses to provide a refund for such product, it will be fulfilled in
the form of an Office Depot Merchandise
Card. Claims fulfilled in this manner take approximately ninety (90)
days to process.
EXCLUSIONS AND LIMITATIONS
SAT PROVIDES THIS LIMITED WARRANTY IN LIER OF ALL OTHER
WARRANTIES EITHER EXPRESS OR IMPLIED. EXPRESSLY
EXCLUDED ARE ALL WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY. SAT’S SOLE OBLIGATION AND
THE USER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY
SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT AT SAT’S
SOLE DISCRETION AND COST, OF THE PRODUCT OR
COMPONENTS.
IN NO EVENT SHALL SAT, ITS AFFILIATES, SUBSIDIARIES OR
PARENT COMPANIES BE RESPONSIBLE FOR CONSEQUENTIAL,
SPECIAL, OR INCIDENTAL DAMAGES ARISING OUT OF A CLAIM
OF DEFECTIVE PRODUCT EVEN IF SAT HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
SOME STATES OR PROVINCES DO NOT ALLOW THE EXLCUSION
OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATIONS
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH MAY VARY BY STATE OR PROVINCE.
THIS WARRANTY APPLIES ONLY TO THE U.S. AND CANADA.
Return Instructions
Please call 1-877-777-HELP (1-877-777-4357) for warranty service or
product support.
2.Using the power station as battery bank, connect USB cable
extender and switch to OUTPUT, LED flash green.
CONNECTION AND USE THE SPEAKER
Bluetooth Pairing
1.Switch on speaker, blue LED display solid blue for seconds then
start flashing, Turn on the Bluetooth device on your phone or tablet,
search“DS-1168 ”and pair. When successfully paired, LED will
display solid blue light. If smart phone need password,
please enter 0000.
2.Adjust the volume by pressing
the Volume +/- buttons on
the top of speaker and on
your bluetooth device. Press
the Play/Pause button to play
or pause the tune. Press and
hold the Play/Pause button to
terminate bluetooth Connection.
3.Handsfree function, when a call coming,
press handsfree button to answer the
phone call. After the call ends, the speaker
will continue playing the interrupted music.
4. Power off, when not in use, please switch
off speaker to save battery.
Audio input using 3.5mm cable
1.Connect a 3.5mm audio cable to the 3.5mm Audio input on the
speaker and on an external audio output such as MP3 players.
2.Speaker will switch to Line-in mode automatically.
3.Press the Vol-/+ button on speaker or native controls on the
connected MP3 player to control volume.
4.Press Play/Pause on the audio player to play/pause the tune.
Using the Bluetooth® microphone
Answering and ending a call using your mobile phone
When there is an incoming call, the speaker will generate a tone
and a verbal notification to alert you of this event.
Briefly press the Hands-free button to pick up. You may also press the
answer button on your cellular phone to take the call using
the speaker.
Speak with a clear voice right into the built-in microphone
located on the front section of the speaker.
To end a call, tap the Hands-free button once again.
Likewise, you may also end the call directly
using the command on your cell phone.
When listening to music using your mobile
phone, playback will resume automatically
once the call has ended.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : DS-1168 说明书
Metadata Date                   : 2013:08:17 10:55:50+08:00
Modify Date                     : 2013:08:17 10:55:50+08:00
Create Date                     : 2013:08:17 10:55:50+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 60
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6430 bytes, use -b option to extract)
Instance ID                     : uuid:2c496da0-58ae-4241-822e-fdc80f940852
Document ID                     : xmp.did:1BDC0206E506E31188B5AEE9D80AB7C2
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:ca115200-cda9-47da-b830-0c40757cb51d
Derived From Document ID        : xmp.did:A7F6349A4C05E311BF51F82ADBACC0CB
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:32EE2D759900E311977AE116B4BBE7E0, xmp.iid:1BDC0206E506E31188B5AEE9D80AB7C2
History When                    : 2013:08:09 11:11:59+08:00, 2013:08:17 10:55:45+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 796.917249
Max Page Size H                 : 254.000000
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT
Font Family                     : Arial
Font Face                       : Regular
Font Type                       : Open Type
Font Version                    : Version 3.00
Font Composite                  : False
Font File Name                  : ARIAL.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools