Woodstream M240RF Wireless Electronic Rat Trap User Manual FCC Part 15
Woodstream Corporation Wireless Electronic Rat Trap FCC Part 15
Manual
3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587
Certification Exhibit
FCC ID: SNA-M240RF
IC: 9458A-M240RF
FCC Rule Part: 15.247
IC Radio Standards Specification: RSS-210
ACS Project: 12-2124
Manufacturer: Woodstream Corporation
Model: M240RF
User Manual
User Manual for Victor® Kill-@lert Remote
Notification System
Victor® Kill-@lert Remote notification system is the latest innovation in Rodent Control.
This system and traps are easy to use and operate. To set up your Kill-@lert Remote
notification system, please follow the instructions below.
Step 1
Once you receive your system in the mail and before you do anything else, please go to
www.victorkillalert.com
Step 2
Create Kill-@lert account. This will be your personal portal through which you will be
able to monitor and customize your system
Step 3
Download the Kill-@lert software to your PC. Make sure you select the appropriate
software package based on the operating system your PC has.
Step 4
Follow the installation instructions and install the software to your PC
Step 5
Once the software is installed, plug in the Victor® Kill-@lert USB device into the USB
slot on your PC
Step 6
Go back to www.victorkillalert.com and register your traps using the trap code on the
back of the electronic mouse/rat trap.
Step 7
Turn on your electronic mouse/rat trap
Step 8
Once the trap information portal shows up on your screen you can name your trap and
designate the location you will be placing it at
Step 9
Place the trap in the desired location.
Once the mouse has been caught, your web portal on victorkillalert.com will be updated
with the catch information. If you have elected that option during the set up process, you
will also receive either a text message or an email, notifying you of the catch.
