Wooyoung Telecom HL900D LCD MONITOR User Manual manual 1 of 4

Download:
Mirror Download [FCC.gov]
Document ID	538792
Application ID	t3+vPnpP5OxxPE5bWVkrZw==
Document Description	manual 1 of 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	243.33kB (3041564 bits)
Date Submitted	2005-05-03 00:00:00
Date Available	2005-04-22 00:00:00
Creation Date	2005-05-03 15:21:41
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2005-05-03 15:22:02
Document Title	manual 1 of 4
Document Creator	Illustrator

HL
HL
User’s Reference
LC
TFT L
CD M onit or
P/N : 97E9500152
Contents
1. Precautions
2. Items
3. Setting up the LCD monitor
How to connect the power cord and the several cables to the LCD monitor.
Plug & Play
Warm-up Time
4. Adjusting The Monitor
The Function Control Buttons
How to use the Function Key.
Main OSD Menu
BRIGHTNESS/CONTRAST
COLOR
POSITION &CLOCK/PHASE
OSD FUNCTION ADJUSTMENT
SETUP MENU
5. Appendix
Display Modes
15-pin D-Sub Connector
24-pin DVI Connector
DPMS Power Saving Mode
10
6. Troubleshooting
11
1
Precautions
Warning : The following information will help you avoid the risk of electric shock, serious injury, and death.
Power cord
AC outlet
Plug the power cord into a
properly grounded outlet.
There is the risk of electric
shock.
If you hear a noise or smell
smoke from the computer or
adaptor, unplug the power cord
immediately, and call the service
center. There is the risk of electric shock or fire.
Do not overload an electrical
outlet with too many devices.
There is the risk of fire.
Do not allow any object or liquid to enter inside the monitor.
There is the risk of electric
shock, fire, or damage to the
monitor.
Do not attempt to disassemble,
fix, or modify the monitor.
There is the risk of electric
shock or fire.
Caution : The following information will help you avoid the risk of minor or moderate injury, or damage to the monitor.
220
Do not unplug from the outlet
by pulling the power cord or
when your hands are wet.
There is the risk of electric
shock and fire.
Do not bend the power cord
excessively or place heavy objects
on it. Keep children and pets away
from the power cord as they may
damage the power cord. There is
the risk of electric shock and fire.
Do not use a damaged power
cord or plug. Make sure the
plug fits snugly into the outlet.
There is the risk of electric
shock or fire.
Use a proper voltage/current
level indicated
Do not clean the LCD with
abrasive chemicals.
There is the risk of damage to
the LCD.
Do not scratch and damage
the LCD with sharp objects.
Do not expose the monitor to
the direct sun light.
Keep the monitor away from high
temperature, humidity, and dust.
Operating environment
=0~25degrees Celsius
Operating environment
=30~80relative humidity.
Do not block the fan louvers.
There is the risk of fire or damage to the monitor.
Keep the monitor away from
objects and electrical appliances that may generate electromagnetic fields.
Place the monitor on a flat, stable surface. The monitor may
fall and there is the risk of
damage or injury
Unplug the power cord when
the monitor is not in use for a
prolonged period of time.
2
Items
Setting up the LCD monitor
How to connect the power cord and the several cables to the LCD monitor.
User Manual
LCD Monitor
Power cord
No.
15-pin D-Sub Signal
Cable
Stand
Push the hook until
hanging
N ot i ce
Cable connections
Power Cord
PC
15-pin D-Sub Signal Cable
3 *1
DV I
24-pin DVI Cable
*1 : For HL900D Only
Plug & Play
The adoption of the new VESA Plug and Play solution eliminates complicated and
time consuming setup. It allows you to install your monitor in a Plug and Play compatibl e s y s t e m w i t h o u t t h e u s u a l h a s s l e s a n d c o n f u s i o n . Y o u r P C s y s t e m c a n e a s i l y i d e n t i fy and configure itself for use with your display. This monitor automatically tells the PC
system its Extended Display Identification Data (EDID) using Display Data Channel
(DDC) protocols so the PC system can automatically configure itself to use the flat
panel display.
*1
24-pin DVI Cable
Name
P o we r
*1 : For HL900D Only
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Warm-up Time
All LCD monitors need time to become thermally stable whenever you turn on the
monitor after letting the monitor be turned off for a couple of hours. Therefore, to
achieve more accurate adjustments for parameters, allow the LCD monitor to be
warmed up for at least 30 minutes before making any screen adjustments.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Creator                         : Adobe Illustrator(R) 11.0
For                             : Woobin Jung, WYT
Title                           : HL900D_152����.pdf
Create Date                     : 4/19/2005 2:46 PM
Bounding Box                    : 0 -1 1200 938
Creator Version                 : 11
Container Version               : 9
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:dec79d2d-36e3-4914-9d03-5a501e7adcbc
Modify Date                     : 2005:05:03 15:22:02-04:00
Metadata Date                   : 2005:05:03 15:22:02-04:00
Document ID                     : uuid:f0ad71e5-f79c-4406-a62c-862ffe897d27
Format                          : application/pdf
Producer                        : Acrobat Distiller 4.05 for Macintosh

EXIF Metadata provided by EXIF.tools