World Wide Licenses 1088 ION 4K, ION 4K SPORT DIGITAL CAMERA, ZEUS 1.6 CAMERA User Manual TDV210 Manual

Download:
Mirror Download [FCC.gov]
Document ID	3163247
Application ID	sCVpeOcl1HcnbjfwBq4EiA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.36kB (779472 bits)
Date Submitted	2016-10-14 00:00:00
Date Available	2017-04-13 00:00:00
Creation Date	2016-09-20 16:47:55
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2016-09-20 16:48:05
Document Title	TDV210 Manual
Document Creator	Acrobat PDFMaker 11 Word 版
Document Author:	new

iON 4K
WATERPROOF 4K ACTION CAMERAUSER
Quick Start Guide
EN-1
1. QUICK START
Slide the Door Lock to the left so the red
square isn’t showing
Slide the camera door up to open
Insert the microSD Card
Close the camera door.
Slide the Door Lock to the right to lock it
closed
Slide the Record Slider forward to record.
Slide it back to stop recording
Hold status button for three seconds to
engage photo mode
EN-2
2. CAMERA DIAGRAM KEY
Rotating Lens
Battery Status
13
Reset Button
Record Slider
Tripod hole
14
1-2 Settings Switch
Record Slider Lock
Door Lock
15
Microphone
Recording Indicator
10
Status Button
16
Laser Line & Recording Indicator
Photo Mode Status
11
USB
Memory Status
12
microSD Card Slot
EN-3
3. SETTING UP
Download iON 4K Storyteller to your PC/Mac from the iON 4K website. The link below will help you set
up your camera to make sure it is registered, update the time on your camera, and get the settings
dialed to your custom configuration.
http://www.ioncamera.com/start iON 4K
4. CHARGING THE BATTERY
Slide the door up to open.
Connect your camera to a PC/Mac using the supplied USB Cable.
The Battery Status LED indicates the charge level of the battery. It will change colors from red to green
as the battery charges.
Charge is fully complete when the Battery Status LED turns green. This can take up to three hours.
5. FORMATTING THE microSD CARD
Format the microSD Card prior to recording so your camera is able to properly read and write to it.
Caution: formatting the card will erase everything on it
Check that the Record Slider is in the off position. Open the back of your camera then press and hold
the Format Button until the camera beeps (three to five seconds), then release the Format Button. The
microSD Card LED will flash while the card is formatting and then turn solid green when the format is
complete.
The iON 4K is compatible with:

microSD compatibility.

SDSC (standard capacity) 4GB class 4 card minimum.

SDHC (high capacity) class 4, 6, or 10 microSD Cards up to a maximum capacity of 32GB.
EN-4
6. CAMERA STATUS
Pressing the Status Button will:
 Activate the Laser Line for 15 seconds.
 Display the current battery and memory status.
MEMORY STATUS LED
Green: 50% or more
Yellow: 20 to 50%
Red: 20% or less
BATTERY STATUS LED
Green: 50% or more
Yellow: 20 to 50%
Red: 20% or less
ERROR CONDITIONS

Battery LED flashes red: the battery is almost empty.

Memory LED flashes and there are continuous beeps: the microSD Card cannot be accessed
because the card is full, missing, or not properly formatted.
7. CAMERA SETTINGS
To adjust the settings on your camera, download and install the iON Story teller app to your PC/Mac.
Web: www.ioncamera.com
With the camera connected to your computer, go to the Tools -> Configure Camera menu in iON
Storyteller.
EN-5
Here you can adjust:
Video:
2160p video at 30/25 frames per second
1080p video at 120/60/30/100/50/25 frames per second
720p video at 120/60/30/100/50/25 frames per second
WVGA (480p) at 240/30/200/25 frames per second
Continuous Photo Mode (with photos taken single shot, burst (2, 5, 10 and 10/2 seconds))
Audio
Mic sensitivity
Lighting
White-balance settings
Mic. Sensitivity
Lighting Filter
Lights
LED and laser settings
1-2 Switch
The 1-2 Switch on the back of your camera allows you to preset your iON 4K with two different
configurations that can be easily changed in the field. The settings for each switch position can be set
up using iON 4K Storyteller.
8. RECORDING


Start Recording: Move the Record Slider Lock so that the red square is not showing and then
slide the Record Slider forward. Your camera will power on, beep once, and the Record Status
LED will turn red, indicating that the camera is now recording a video.
Stop Recording: Slide the Record Slider back. Your camera will beep twice, and the Record
Status LED will switch off, indicating that your camera has stopped recording and is powered
off.
EN-6

Record Slider Lock: The small switch on top of the Record Slider is used to keep the Record Slider
from turning on or off. To move the Record Slider forward or back, have the Record Slider Lock
moved so that the red square is not showing. To prevent the Record Slider from moving in either
the record or off positions, move the Record Slider Lock so that the red square is visible.
9. INSTANT PHOTO MODE




Activate Instant Photo Mode: Press and hold the Status Button for three seconds. You will hear
two beeps and see the photo LED turn green, indicating that Instant Photo Mode has been
activated.
Take photographs by pressing the Status Button. You will hear a beep and the photo LED will
flash to indicate that a photograph has been taken.
Turn off Instant Photo Mode: Turn off Instant Photo Mode by pressing and holding the status
button for two to four seconds. The camera will beep three times and the photo LED will flash
and then turn off, indicating that Instant Photo Mode is turned off.
If a photo has not been taken for 60 seconds or longer, your camera will automatically power
down.
10. MOUNTING
Getting the best shot depends only on your creativity. iON offers a wide range of mounts that let you put
the camera just about anywhere, so be creative.
Remember that your iON 4K has a wide-angle lens and objects that are far away will seem smaller than
you expect in your videos.
11. ALIGNMENT
Your iON 4K has a Laser Line that helps ensure you have the horizon properly aligned in your videos.
To use, activate the Laser Line by pressing the Status Button; place your hand in front of the Laser Line
or aim it on to a flat surface a few feet in front of you and rotate the lens (up to 270°) until the Laser Line
is horizontal. When mounting the camera on your helmet or goggles, you may discover that you look
down more than you thought. It may take a few practice videos to find the right alignment.
EN-7
12. ADHESIVE MOUNTS
Clean and dry the mounting surface before applying an adhesive mount. We suggest cleaning the
surface with a small amount of alcohol and applying the mount at room temperature. Let the adhesive
cure for 24 hours before use.
Read all safety information below and operating instructions
before using iON 4K camera to avoid injury
WATERPROOF
Your iON 4K is waterproof to a depth of 10 meters (30 feet) without the use of a waterproof case.
CAUTIONS AND WARRANTY
This Important Product Information Guide contains regulatory, safety, handling, disposal and recycling
information, as well as the 1 year limited warranty for your iON 4K camera. Read all safety information
below and operating instructions before using iON 4K camera to avoid injury.
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage.
BATTERY AND HANDLING
iON 4K uses a non-removable, non-changeable, rechargeable lithium-ion, 3.7V, 1500mAh battery. The
battery may present a hazard if mistreated. Do not disassemble or crush the camera. To charge, only
use the USB Cable with a high power USB port on a computer or other device that is compliant with the
USB 2.0 or 1.1 standards, car, or battery charger.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the U.S. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
proper return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
EN-8
DISPOSAL INFORMATION
Do not dispose of the iON 4K camera in a fire. Dispose of the camera and its internal battery in
accordance with local laws and regulations.
LEASH USE: DO NOT ATTACH THE LEASH TO THE CAMERA WHEN THE CAMERA IS MOUNTED
ON HELMET OR GOGGLES, WHEN THE CAMERA WILL BE USED IN HIGH WINDS OR AT HIGH
VELOCITIES, OR IN ANY OTHER CIRCUMSTANC- ES WHEREBY THE CAMERA COULD CAUSE
INJURY OR HARM IN THE EVENT THAT IT COMES LOOSE FROM THE MOUNT AND REMAINS
TETHERED BY THE LEASH. BY ATTACHING THE LEASH TO THE CAMERA, YOU AGREE TO
WAIVE ANY CLAIMS AGAINST iON, INC. AND ANY OF ITS AFFILIATES, AGENTS, EMPLOYEES,
OFFICERS OR DIRECTORS ARISING FROM THE USE OF THE LEASH. ANY CLAIMS AGAINST
iON, INC. ANY OF ITS AFFILIATES, AGENTS, EMPLOYEES, OFFICERS OR DIRECTORS ARISING
FROM THE USE OF THE LEASH.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
EN-9
FCC Radiation Exposure Statement
This device complies with FCC SAR exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
CE: Hereby, World Wide Licenses Limited declares that this device is in
compliance with the essential Requirements and other relevant provisions of
Directive 1999/5/EC. The full text of the EU declaration of conformity is
available at
The following internet address: www.ioncamera.com
CE SAR:
RF exposure (SAR): The device can safely be used with a distance of 0 mm to the human body.
EN-10
Web: www.ioncamera.com
EN-11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Modify Date                     : 2016:09:20 16:48:05+08:00
Create Date                     : 2016:09:20 16:47:55+08:00
Metadata Date                   : 2016:09:20 16:48:05+08:00
Creator Tool                    : Acrobat PDFMaker 11 Word 版
Document ID                     : uuid:75b00c48-7722-4e1d-9aa9-fec739b3cdcf
Instance ID                     : uuid:73e21ace-5e02-487f-a932-3fd547165627
Subject                         : 21
Format                          : application/pdf
Title                           : TDV210 Manual
Description                     : 
Creator                         : new
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Source Modified                 : D:20160920084731
Company                         : Microsoft
Page Layout                     : OneColumn
Page Count                      : 11
Author                          : new

EXIF Metadata provided by EXIF.tools