Worldline n v VAL512 NFC Payment terminal User Manual pm valina
Worldline s.a./n.v. NFC Payment terminal pm valina
Contents
- 1. use manual appendix with statements
- 2. user manual part2
- 3. user manual part1
user manual part2
PRODUCT MANUAL VALINA the next generation compact, convenient, complete product picture – 4.014 x 3.596 •••••• an atos company VALINA product manual Legal disclaimer and copyrights The information in this document is subject to change without notice and shall not be construed as a commitment by Worldline S.A./N.V. (“Worldline”) The content of this document, including but not limited to trademarks, designs, logos, text, images, is the property of Worldline and is protected by the Belgian Act of 30.06.1994 related to authors’ rights and by the other applicable Acts. The word VALINA and other trademarks used in this document are the property of Worldline. Worldline trademarks used in this document are indicated. Linux is a registered trademark of Linus Torvalds, Java is a registered trademark of Oracle and/or its affiliates and Android is a trademark of Google Inc. The contents of this document can be reproduced by or on behalf of third parties with the prior written consent of Worldline and following its instructions. Worldline accepts no responsibility for errors and omissions introduced when translating or reworking this document. Except with respect to the limited licence to download and print certain material from this document for non-commercial and personal use only, nothing contained in this document shall grant any licence or right to use any of Worldline's proprietary material. While Worldline has made every attempt to ensure that the information contained in this document is correct, Worldline does not provide any legal or commercial warranty on the document that is described in this specification. The technology is thus provided “as is” without warranties of any kind, expressed or implied, included those of merchantability and fitness for a particular purpose. Worldline does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, product or processes disclosed. To the fullest extent permitted under applicable law, neither Worldline nor its affiliates, directors, employees and agents shall be liable to any party for any damages that might result from the use of the technology as described in this document (including without limitation direct, indirect, incidental, special, consequential and punitive damages, lost profits). These terms shall be governed by and construed in accordance with the laws of Belgium. You irrevocably consent to the jurisdiction of the courts located in Brussels for any action arising from or related to the use of this document. Document information document title VALINA product manual security unrestricted last modified 6 June 2016 owner Luc Luyckx author Niels Grundtvig Nielsen document release 0.1 © Worldline 2016 VALINA PRODUCT MANUAL Contents About this book .............................................................................................................1 Who should read this book .......................................................................................1 Introduction ...................................................................................................................3 Security recommendations .......................................................................................3 Display ......................................................................................................................4 Technical specifications...............................................................................................5 Size and weight.........................................................................................................5 Integration dimensions ..............................................................................................6 External interfaces ....................................................................................................7 Reading cards and devices.......................................................................................7 Operating the contactless reader........................................................................8 Software engines for contactless transactions....................................................9 Security application Modules (SAM) .........................................................................9 System on chip ASIC ................................................................................................9 Audio .........................................................................................................................9 Other features .........................................................................................................10 Accessories .................................................................................................................11 Development environment .........................................................................................13 Logistics information..................................................................................................15 Terminal label .........................................................................................................15 MAC address label..................................................................................................16 UNRESTRICTED pm_valinaTOC.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL ii – empty for double-sided printing – pm_valinaTOC.fm VALINA PRODUCT MANUAL Figures Figure 1. VALINA ..................................................................................................... 4 Figure 2. General dimensions .................................................................................. 5 Figure 3. Internal mounting details for VALINA ........................................................ 6 Figure 4. Minimum required space (from EVA Specs) ............................................. 6 Figure 5. Indicators, connectors and controls .......................................................... 7 Figure 6. Front view.................................................................................................. 8 Figure 7. Terminal label.......................................................................................... 15 Figure 8. MAC address label.................................................................................. 16 iii UNRESTRICTED pm_valinaLOF.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL iv – empty for double-sided printing – pm_valinaLOF.fm VALINA PRODUCT MANUAL About this book This book provides product information about: • • • • • the VALINA terminal and its accessories technical specifications security considerations approvals and certifications, including applicable environmental regulations VALINA parts list Who should read this book This book is intended for: • anyone who will be installing a VALINA terminal in a vending machine or other equipment • field and service technicians working on a VALINA terminal Information from this book may be reused in other documentation such as a user guide UNRESTRICTED pm_vln_about.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL – empty for double-sided printing – pm_vln_about.fm VALINA PRODUCT MANUAL Introduction The VALINA is an intelligent all-in-one terminal for unattended payments with and without PIN, supporting a range of standards including EMV and Mifare. It handles payments by chip card, NFC cards and devices, and magstripe card. The VALINA is PCI 4.x certified, SRED included. It has been designed to provide a complete solution for EMV payments, and can run either newly-developed Android apps or legacy apps (written for the MAPS platform) from Worldline. Key hardware features include: • • 3.5” touch TFT colour display for an enjoyable payment experience small footprint matches EVA/CVS 1.3 standards for Standard Door Module (SDM) dimensions, making integration in vending machines easy The VALINA takes up limited space inside the machine: compare this with the footprint of a bank note acceptor (BNA) or coin detector. • onboard Ethernet, serial interface, MDB, USB host and USB device meet most communications requirements out-of-the-box • proximity detector (patented) for improved power management Typical integration scenarios for the VALINA include: • • • • • vending machines, ticket machines and kiosks petrol forecourts and car-washes on-street and off-street parking dispensers and pre-payment meters self-service checkouts Security recommendations For security reasons, merchants are advised to check their VALINA regularly for: • • unusual cables connected anywhere on the terminal visible damage to the housing UNRESTRICTED pm_vln_introduction.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL Display The VALINA incorporates a touch-sensitive TFT 64K colour display. The display size is 320 x 480 pixels, 3.5 inches. valinaDisplay Figure 1. VALINA last updated 6/6/16 UNRESTRICTED document release 0.1 pm_vln_introduction.fm VALINA PRODUCT MANUAL Technical specifications This chapter provides a summary of the technical specifications, followed by additional information on: • • • external interfaces processor customisation options Size and weight Figure 2. • • General dimensions size: 132.42 x 101.59 x 88.00 mm (height x width x depth) weight: 573g For exact measurements, including tolerances, download drawing 3034910003 from the Partner Extranet. UNRESTRICTED pm_vln_techSpecs.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL Integration dimensions – indicative Figure 3. Internal mounting details for VALINA For exact measurements, including tolerances, download drawing 3034910003 from the Partner Extranet. Figure 4. Minimum required space (from EVA Specs) last updated 6/6/16 UNRESTRICTED document release 0.1 pm_vln_techSpecs.fm VALINA product manual External interfaces There are six sockets available for connecting the VALINA to external peripherals. The picture shows the sockets in the connector area at the back of the VALINA. fig_column Figure 5. Indicators, connectors and controls 1 RS-232 RS-232 port with RTS/CTS flow-control, for connecting peripherals such as ePOS equipment or a printer. The port allows connection speeds up to 115,200 bps and is fitted with an 8p RJ45 connector. 2 Ethernet Ethernet connection 10/100 Mbit, using an RJ45 connector. 3 USB host USB 2.0 full speed (up to 480 MBit/sec) host interface, which can be used to connect to a USB stick or other storage device. 4 USB device USB 2.0 Full Speed (up to 480 MBit/sec) device interface, which can be used to connect to ePOS equipment/PC and to perform key loading. 5 TTL TTL connector Microfit 43045, providing power supply, one output and up to three inputs: used to attach a peripheral to the terminal. 6 MDB MDB interface supports the MDB 4.2 protocol, for communicating with vending machines or other devices supporting the standard. Reset button The reset button is used to reset the terminal without unplugging the power. For application developers, it provides an easy way of rebooting the terminal. The reset button is slightly recessed to prevent accidental use. Menu button The menu button can be used to activate a menu on the terminal, for example to check settings. Reading cards and devices The VALINA contactless reader is ergonomically designed and supports fast, fully secure payments with both contact and contactless cards and devices of all signalling schemes defined in the ISO14443 standard. UNRESTRICTED pm_vln_techSpecs.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL fig_column Figure 6. Front view contactless cards/devices The landing zone for contactless payment is: – – illuminated, easily recognisable and accessible marked by the contactless symbol The contactless symbol is placed where the signal is strongest, and shows the “landing zone” where customers should tap the card or device chip (contact) cards – – the chip-card reader is at the bottom of the terminal, 45° from the vertical the slot is illuminated to show the user where to insert the card magstripe cards – – the magstripe-card reader is on the right-hand side of the terminal cards are swiped from the top of the slot to the bottom Operating the contactless reader VALINA is designed for use with both contact and contactless cards/devices. Contactless cards/devices may be tapped on the front of the terminal. The terminal can communicate with cards up to 40mm from the reader, in line with the EMV standard. Other characteristics include: • • • • • • • • contactless communication in 13.56MHz band contactless communication up to 424kbit/s ISO/IEC 14443A ISO/IEC 14443B MIFARE classic/desfire compatible FeliCa compatible ISO/IEC 18092 NFCIP-1 integrated LEDs indicate NFC transaction progress The VALINA offers card holders the real “tap & go” experience. Thanks to the powerful antenna in the terminal, the contactless device only has to be held near the landing zone. last updated 6/6/16 UNRESTRICTED document release 0.1 pm_vln_techSpecs.fm VALINA product manual Software engines for contactless transactions The MasterCard PayPass and the Visa payWave engines are available. Other engines, for example American Express ExpressPay, can be provided on customer request. Specific contactless applications are developed locally, since they deal with communications between terminal and host. Security application Modules (SAM) VALINA contains two internal chip card interfaces (type ID0) for security application modules (SAM). Both 3V and 5V SAMs can be read. Standard current provided to the SAMs is 55 mA. To reach the SAM slots, the telecom cover needs to be opened using a Torx screwdriver. System on chip ASIC The processor for the new generation of terminals from Worldline is a high-tech Application Specific Integrated Circuit (ASIC). For the VALINA, this single chip provides all essential features, including: • ARM Cortex A9 main processor (600 MHz) – – • • • • • • security / communication core application / communication core 512 MB RAM memory 4 GB memory real-time clock (RTC) hardware DES / 3-DES encryption device Linux and Android operating systems support for MAPS/Linux applications Audio VALINA is equipped with a speaker for audible feedback to the user. Developed to generate single tones, it can also play music (supported formats include mp3 and wav) and voice output. UNRESTRICTED pm_vln_techSpecs.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL Other features security 3DES, AES and RSA encryption algorithms DUKPT key management (other schemes available on request) SSL (v3.0) additional security schemes available power supply either of: – – 12 VDC via Microfit 24-45 VDC via MDB different power management profiles can be used software Linux and Android operating systems Linux-based development kit (C and Java) secure remote download of software hardware integration options hardware integration kit key-loading interface communications and peripherals standard Ethernet interface 1 x RS232 1 x USB device 1 x USB host 1 x MDB interface 1 x I/O (1 out, 3 in) comms board interface microSD card slot proximity detector 10 last updated 6/6/16 UNRESTRICTED document release 0.1 pm_vln_techSpecs.fm VALINA PRODUCT MANUAL Accessories A number of optional accessories are available, to make the VALINA easier to use and integrate: communication boards Separate boards and external antennas are available for Bluetooth/WiFi, 2G and 2G/3G communications. Only one board at a time can be fitted. Any extra communication board must be requested when ordering the VALINA. debug cable and connector To facilitate software development, a debug cable and connector is available. (delivered as standard with a VALINA development terminal) The cable connects to the internal electronics of the terminal, making it possible to develop and validate a payment application on a PC before transferring it to the terminal. power adaptor plug-in adaptor (Microfit) 12 VDC, 2A 11 UNRESTRICTED pm_vln_accessories.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL 12 – empty for double-sided printing – pm_vln_accessories.fm VALINA PRODUCT MANUAL Development environment Developing custom applications for the VALINA is supported by a development terminal and a complete software development kit (SDK). SDK The VALINA platform includes a professional, full-featured, Linux-based application development environment supporting both C and Java. An SDK for Android will be made available in phase 2. development frameworks – backward-compatibility environment (MAPS), making it easy to port existing applications to VALINA – application programming environment, for developing new applications that exploit the full functionality of VALINA comprehensive set of development tools C and Java development tools for MAPS applications comprehensive documentation – description of the MAPS Application Programming Interfaces (API) for C and Java – introduction to the System-on-Chip hardware, software and security architecture – – interface design guidelines application development and porting guidelines 13 UNRESTRICTED pm_vln_devEnv.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL 14 – empty for double-sided printing – pm_vln_devEnv.fm VALINA PRODUCT MANUAL Logistics information This chapter provides: • • samples of labels for the VALINA terminal, accessories and packaging information on product packaging Terminal label Examples of product labels are provided to show what information is given on each label. Minor differences in layout may occur. Figure 7. Terminal label The VALINA terminal label shows: • • • maker’s name: Worldline model name: VALINA article number, referring to the specific terminal hardware This number identifies the specific terminal hardware and customisations, and is used for certification purposes. It is not the same as the commercial article number mentioned on the packaging box, which is customer-specific. • serial number: – – • • • • • human-readable, for example Serial N°: AZY3694 barcode production date in the format yywk, so 1631 for week 31 in 2016 country of origin: Made in Singapore voltage and current: 12.0 VDC 2 A safety labels, for example CE, FCC WEEE-logo 15 UNRESTRICTED pm_vln_logistics.fm document release 0.1 last updated 6/6/16 VALINA PRODUCT MANUAL MAC address label Figure 8. MAC address label The MAC address label contains communications and software information. • MAC address, which can be – – • read from the barcode consulted via software HW/ID (hardware ID) made up from a four-character prefix – 424B in the example – followed by the hexadecimal MAC address – 00B81901805A in the example the full HW/ID is not provided as a single barcode • HW (production) code, for example TT002 this information can also be read from the barcode • REV (hardware revision code) 16 last updated 6/6/16 UNRESTRICTED document release 0.1 pm_vln_logistics.fm
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : A548040 Create Date : 2016:06:06 10:19:21Z Modify Date : 2016:06:06 10:20:36+02:00 Language : en XMP Toolkit : Adobe XMP Core 5.4-c005 78.150055, 2012/11/19-18:45:32 Creator Tool : FrameMaker 12.0.4 Metadata Date : 2016:06:06 10:20:36+02:00 Producer : Acrobat Distiller 10.1.4 (Windows) Format : application/pdf Title : pm_valina.book Creator : A548040 Document ID : uuid:534fb0c0-6886-4d91-a2c8-db031044e31d Instance ID : uuid:6388c3fc-6b00-4876-a1f8-7c1ae34a0e21 Page Mode : UseOutlines Page Count : 22EXIF Metadata provided by EXIF.tools