Worldwise Pet 91000 Pawscout Dog/Cat tag User Manual
Worldwise Pet Products Limited Pawscout Dog/Cat tag
User manual
GETSTART
Protectyourpetinthreeeasysteps:
1) InstallthefreePawscoutAppforIOSandAndroid.
2) Completedthequicksetupwizardintheapp.
3) Encouragefriends,family,neighbors,dogwalkers
andpetsitterstoinstallthefreePawscoutAppto
helpkeeptabsonyourpet,evenwhenyou’reout
ofrange.
NEEDSOMEHELP?WRITETO:
SUPPORT@PAWSCOUT.COM
ENGINEERINGSPECIFICATION
Sleepcurrent:below20uA
Operationvoltage:3V
Operationcurrent:below20mA
Frequencyrange:2.402GHzto2.480GHz
ConfirmBluetooth:Bluetooth4.0
Functionaltermperaturerange:‐10Cto+55C
PCBDimensions:29mm
Outputpower:Below5W
OperationRange:200meter
Waterproof:IPX7
Industry Canada (IC) Compliance Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Industrie Canada (IC) Déclaration de conformité
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Federal Communications Commission (FCC) Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This is device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Any changes or modifications not expressly approved by Pawscout could void the user's authority to
operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.