Wyse Technology 62230WL Wireless Module User Manual

Wyse Technology Wireless Module

a href="https://usermanual.wiki/Wyse-Technology" itemprop="url"> Wyse Technology >

User manual

Administrators GuideWyse® Enhanced Microsoft® Windows® Embedded Standard 7 WFR2Products: C90LE7, R90L7, R90LE7, X90c7, X90m7, Z90D7, Z90S7Issue: 070511 PN: 883920-10 Rev. C
iiCopyright Notices© 2011, Wyse Technology Inc. All rights reserved.This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this publication without express written permission.End User License Agreement (“License”)A copy of the Wyse Technology End User License Agreement is included in the software and provided for your reference only. The License at http://www.wyse.com/license as of the purchase date is the controlling licensing agreement. By copying, using, or installing the software or the product, you agree to be bound by those terms.TrademarksThe Wyse logo and Wyse are trademarks of Wyse Technology Inc. Other product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. Specifications subject to change without notice.PatentsThis product and/or associated software are protected by copyright, international treaties, and various patents, including the following U.S. patents: 6,836,885 and 5,918,039.Restricted Rights LegendYou acknowledge that the Software is of U.S. origin. You agree to comply with all applicable international and national laws that apply to the Software, including the U.S. Export Administration Regulations, as well as end-user, end-use and country destination restrictions issued by U.S. and other governments. For additional information on exporting the Software, see http://www.microsoft.com/exporting.Ordering InformationFor availability, pricing, and ordering information in the United States and Canada, call 1-800-GET-WYSE (1-800-438-9973) or visit us at http://www.wyse.com. In all other countries, contact your sales representative.FCC StatementThis equipment has been tested and found to comply with the limits for either Class A or Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and the receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Shielded interconnect cables and shielded AC power cable must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by the system's manufacturer could void the user's authority to operate the equipment. Operation on the 5.15-5.25 GHz frequency band is restricted to indoor use only. The FCC/IC requires indoor use for the 5.15-5.25 GHz band to reduce the potential for harmful interference to co-channel Systems. Therefore, it will on only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and 5.725-5.850 GHz band when associated with an access point (AP). This radio transmitter (identify the device by certification number, or model number ifCategory II) has been approved by Industry Canada to operate with the antenna types listedbelow with the maximum permissible gain and required antenna impedance for each antennatype indicated. Antenna types not included in this list, having a gain greater than the maximumgain indicated for that type, are strictly prohibited for use with this device. CautionModifications made to the product, unless expressly approved by Wyse Technology, could void the user’s authority to operate the equipment.
Download:
Mirror Download [FCC.gov]
Document ID1545139
Application ID9yIi+bH0vDe4f83WQ5Yp6w==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize184.96kB (2312029 bits)
Date Submitted2011-09-20 00:00:00
Date Available2011-09-20 00:00:00
Creation Date2011-07-05 14:52:57
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2011-09-18 23:06:31
Document TitleAdministrators Guide: Wyse® Enhanced Microsoft® Windows® Embedded Standard 7 WFR2
Document CreatorFrameMaker 8.0
Document Author: Wyse Technology Inc.
FCC ID Filing: DYD62230WL

Navigation menu