X Wireless SKYBELL Home Phone User Manual GSM
Xwireless LLC Home Phone GSM
Contents
- 1. User Manual
- 2. Users Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3752553 |
| Application ID | u4CgCc/I1XNyfrGR8RDM0w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 105.9kB (1323736 bits) |
| Date Submitted | 2018-02-13 00:00:00 |
| Date Available | 2018-02-13 00:00:00 |
| Creation Date | 2017-11-08 14:06:23 |
| Producing Software | Microsoft® Word 2016 |
| Document Lastmod | 2018-02-13 18:32:46 |
| Document Title | GSM User Manual |
| Document Creator | Microsoft® Word 2016 |
| Document Author: | Eric |
Fixed Wireless Terminal Product Introduction Congratulations on purchasing the Vortex SkyBell Home Phone. Before using this terminal, please read this user guide carefully. This is our new design, which uses GSM networks to operate. You can dial local, domestic and international calls with this Terminal, connecting with a common wired desktop phone and a standard SIM card. It is widely used in these areas: Homes Remote country Mountains Public telephone shops Offices Mobile places such as ships, trains, and long-distance buses Our Wireless Terminal also has these characteristics as below: Easy to install Easy to operate Powerful capacity to receive signal Clear voice quality Long life Steady performance Page 1 of 16 Fixed Wireless Terminal Key Technical Specifications 1. Network support: GSM 850/900/1800/1900MHz 2. Frequency range: TX Frequency Range: 880~915MHz, 1710~1785MHz 824~849MHz, 1850~1910MHz RX Frequency Range: 925~960MHz, 1805~1880MHz 869~894MHz, 1930~1990MHz 3. Voltage: DC3.7V battery pack or DC5V from adapter 4. Power consumption: Static ≤ 25MA, In Use ≤ 500MA 5. Peak power consumption: 0.25W/0.5W 6. Receive sensitivity: -104dB 7. Antenna increment: All directions: 2dB Page 2 of 16 Certain/Selection: 2dB Fixed Wireless Terminal Key functions 1. Can dial local calls, mobile calls, international calls and special free calls; 2. Password authority administrable; 3. volume adjustable; 4. Time and Date configurable; 5. Supports USB modem function, support: Windows XP; Windows Vista; Windows 7; Windows 8; Windows 10; Cautions and Storage Cautions 1. This terminal should not be used at garage, oil storage, and chemical plant or near any inflammable or explosive substance. 2. This terminal should be avoided in the hospital. It will interfere with medical electronic equipment such as pacemaker and audiphones. 3. If it is found that the terminal cannot successfully login to the network, please check whether the SIM card or antenna is properly installed. 4. Do not touch the antenna when the Terminal is being used to make or receive calls, otherwise the terminal will be damaged. This kind of damage is beyond the range of warranty. 5. When the terminal is being used, it should be placed where signal is strong enough. To ensure good voice quality, the terminal should be far from other electronic equipment. 6. Do not use chemical substance to clean the terminal, instead use a dry soft cloth to clean it. 7. Don't disassemble the terminal by yourself. If there is any problem, please contact the authorized personnel. Storage: 1. The terminal that is packed or not could piled up no more than 10 layers. 2. The terminal should be stored in a ventilated and dry place. 3. Do not knock the terminal to avoid breaking the case. Page 3 of 16 Fixed Wireless Terminal This user guide provides information on the use and operation of your FWT. Kindly read all the information contained in this user guide carefully prior to using the Phone. This will help you in getting the best performance and shall prevent any unintended damage to the device. Check the contents of the box as per the packing list and report any discrepancies immediately to the store from where the device has been purchased. Do’s & Don’ts Do not clean the FWT while in operation. Before attempting to clean the FWT, turn the FWT off, disconnect the external power adapter. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Do not hold the antenna. This may affect call quality and cause FWT to operate at unintended power levels. Keep the antenna free from obstructions and position the antenna straight up. This will ensure best call quality. Do not use a damaged antenna. Have this replaced through a qualified technician. Only use the antenna approved by the manufacturer. Unapproved antenna may impair the call quality as well as cause damage to the FWT. Do not attempt to change the security codes or components. User is responsible for any consequences arising out of such attempt. Avoid shock or impact. Rough handling can cause damage to the FWT body and internal circuits. Do not paint. During lightning do not touch power plug or FWT line. This can cause Electric shock, even death. Do not touch the antenna. Your FWT works with 100-240V AC. Check the voltage before connecting. Do not plug many power cords into the outlet. Do not touch the plug with wet hands. Always grasp and pull the plug, not the cord. Do not put heavy things on the power cord or bend it too much. Page 4 of 16 Fixed Wireless Terminal If the FWT is not working for any reason, do not attempt to repair it. The FWT should be serviced by qualified service personnel only. Place the FWT and the power supply in a properly ventilated place. Do not place the FWT near high temperature objects, under direct sunlight, near source of water, near fire or near inflammable and explosive materials. Do not place any articles over the FWT. Place the FWT in a dry place and do not expose to moisture. Place the FWT away from other electronic devices like TV and Radio to avoid interference. For a better reception, do not place the Instrument in a building with iron or metal roof. Hospitals or health care facilities may use equipment which is sensitive to Radio Frequencies. Please ensure that your FWT is turned “OFF” while near such facilities. Do not use the FWT in designated “No Fixed FWT Use” area. Page 5 of 16 Fixed Wireless Terminal Connect the terminal Connecting Your Service Provider To use the networks services available in your terminal, you will need to sign up with a wireless provider and purchase a SIM (Subscriber Identity Module) Card or purchase a prepaid SIM card. In many cases, the wireless provider will make available descriptions of its services and instructions for using its features. Wireless providers may differ in their support of features. Before you sign up, make sure the wireless provider supports the features that you need. Installing the Antenna Choosing a proper place for the terminal and antenna is the important first step for installation. You can use your mobile phone to search for the place where the strongest signal is. Then put the terminal here. Screw the antenna into the port in the back of the terminal. Please do not place the antenna and the terminal too close to a TV set, computer, or radiogram. It will disturb the signal of the terminal. Inserting a SIM Card Make sure the terminal is switched off and the AC adapter is unplugged: insert the SIM card only when the terminal is switched off and the AC adapter is unplugged. Follow the instructions below to insert a SIM Card into the terminal. 1). Screw off the screw of SIM card case, and open the cover. 2). Slide back the SIM card door and lift it up. 3). Slide the SIM card into the SIM door making sure that the clipped corner of the SIM card lines up with the clipped corner of the SIM holder. 4). Close the SIM card door and slide it to lock the SIM card in place. 5). Replace the cover of SIM card case and fixes it with a screw. Page 6 of 16 Fixed Wireless Terminal Connecting your terminal with desktop phone If you want to use the terminal to make calls, you should connect the terminal with a common wired desktop phone. There are two communication portals at the back of the terminal. You can connect one desktop phone and billing machine (optional) with our terminal. It’s very easy to connect the phone and terminal using a common communication cable. Page 7 of 16 Fixed Wireless Terminal Operation and Setting 1． Power on/off the FWT There is a toggle switch on the back of the FWT. 2. Date and Time setting and query 2.1 Date Query command: **1010*1#. Response Confirmation Tone if successful and device will display Year,Month,Day. The below photo is a sample: 2.2 Time Query Command: **1010*2#. Response Confirmation Tone if successful and device will display hour and minute. The below photo is a sample response: Page 8 of 16 Fixed Wireless Terminal 2.3 Set time command: **2011*MMMM*YYMMDDHHMM# Response Confirmation Tone if successful. MMMM is password, default password is 0505. YYMMDDHHMM is year (YY) month (MM) day (DD) hour (HH) minute (MM). 2.4 Version Query Command: **1010*0# Response Confirmation Tone if successful and device will display current Software version number. The below photo is a sample response: 1. Dialing: Pick up the handset and input desired number after hearing dialing tone; Press “#” key after inputting desired number to dial it immediately, it will be dialed out automatically after 4 seconds if you don’t press “#” key; The LCD will display below photo: Page 9 of 16 Fixed Wireless Terminal 2. Pick up phone call: When the terminal rings that means there is new call incoming, the LCD will display the above photo, pick up handset to proceed conversation, and then it will show the below photo: Return handset to the base after conversation completed. The LCD will show the below photo with the total call timer: Page 10 of 16 Fixed Wireless Terminal 4. Special setting commands. MMMM is previous Change password password **2010*MMMM*N NNNN NNN*NNNN# and is password, new default password is 0505. MMMM is password, **2011*MMMM*Y Set Time YMMDDHHMM# Response YYMMDDHHMM Confirmation Tone if is year (YY) month success (MM) day (DD) Password hour (HH) minute Authority (MM). Management The Function command used to is obtain setting Set command authority **2012*MMMM# Response authorization, and it Confirmation Tone if will lose efficacy in success another minute. default password is 0505. RESTORE FACTORY Response **2030*1234# SETTINGS Confirmation Tone if success Page 11 of 16 Restore value. default Fixed Wireless Terminal The following commands need customer to gain some setting permissions. (The red letter ones ) Volume setting Set 100ms **1020*N# flash hang up. Enable ring back tone **1050*1# Response N is volume level 1- Confirmation Tone if 8 ， Default level is success level 5. Response Default Confirmation Tone if 100ms flash hang success up. Response **1060*1# Confirmation Tone if success Function setting Disable ring back tone Response **1060*0# Confirmation Tone if success Enable Caller ID blocking Disable Caller ID blocking **1100*1# value is Play ring back tone when you call out but did not’ getting through. This option is ON by default. Response No all SIM card Confirmation Tone if support success function. this Response **1100*0# Confirmation Tone if Default value success Display numbers in DTMF mode Response **1110*0# Confirmation Tone if success Show as DTMF by default. Response Query number display mode **1110*2# Confirmation Tone if Value means success and show up DTMF mode. as 10X T is delayed time. Its Call in and call out Set numbers dial out delayed **1120*T# Response value is 1~9 second. Confirmation Tone if The minimum time success is 1 second, default value is 5 second. Query delay seconds and dial out after pressing call **1120*0# number Page 12 of 16 Response XX means delayed Confirmation Tone if time duration. Unit: success and show up second, as 2XX means 3 seconds. e.g. 03 Fixed Wireless Terminal Disable Response international phone **1140*1# Confirmation Tone if call out success Enable Response international phone **1140*0# call out Confirmation Tone if success To restrict overseas call. Overseas call are enabled by default. Enable international phone call out If value of X is 1, it means Query international phone call **1140*2# restriction there is Response international Confirmation Tone if restriction; success and show up If value of X is 0, it as 40X means there is no international call call restriction. Restrict all incoming calls Response **1141*1# Confirmation Tone if success Cancel all incoming call restriction Response **1141*0# Confirmation Tone if success All incoming calls are barred. There is no restriction by default. No incoming call is barred. Response Set call waiting **1200*1# Confirmation Tone if success Turn off call waiting Call setup Set Response **1200*0# Confirmation Tone if success unconditional transfer Response **1211*MMM# Confirmation Tone if success Response Set busy transfer **1221*MMM# Confirmation Tone if success setup unable to get through **1231*MMM# and Page 13 of 16 MMM is the transfer of the phone number MMM is the transfer of the phone number Response MMM is the transfer Confirmation Tone if of the phone number Fixed Wireless Terminal transfer success MMM is the transfer Setup No-answer diversion Response **1241*MMM# of the phone number Confirmation Tone if success No response 30s after transfer Response Cancel all transfer **1250*1# Confirmation Tone if success Set Response **1321*MMM# telephone number 1 Confirmation Tone MMM is the transfer if success of the phone number No default value Set Set the number of time delay dialed Response **1322*MMM# telephone number 2 Confirmation Tone MMM is the transfer if success of the phone number No default value Set Response **1323*MMM# telephone number 3 Confirmation Tone MMM is the transfer if success of the phone number No default value MM is the Set the Set the call time delay **1310*MM# Response number of seconds, Confirmation Tone if Up to two digits, success The default value of 5 seconds Call switching (hold) Fixed dialling **2000*# conference call **3000*# Query all incoming **1141*2# Page 14 of 16 Response If value of X is 1, it Confirmation Tone if means there is Fixed Wireless Terminal function calls setting success and show up international as 40X restriction; call If value of X is 0, it means there is no international call restriction. is sequence number, value ranges from 0-9, and Set incoming call blacklist **1142*M*N# Response means there are 10 Confirmation Tone if groups of number. success N means number segment, maximum length is 11 digits. Clear all incoming call blacklist Response **1142*# Confirmation Tone if success Clear all incoming call blacklist is sequence number, value ranges from 0-9, means the sequence number in 10 showed as numbers. Response Query incoming call white list **1143*M*# Confirmation Tone if It is success and show up XXNNN…, as XXNNN XX is sequence number, ranges from 0-9; its value is the same as that of M. NNN is restricted number segment. Set fixed restricted number Response **1144*M*N# Confirmation Tone if success sequence number, ranges from 0-9; it means you can set 10 telephone numbers. Page 15 of 16 is is number Fixed Wireless Terminal segment, the length is no more than 11 digits. Clear all fixed restricted numbers Response **1144*# Confirmation Tone if success Clear all fixed restricted numbers is sequence number, ranges from 0-9; it means you are inquiring the Nth phone number in the 10 Inquire fixed restricted number **1145*M# numbers, and Response showed Confirmation Tone if XXNNN…, XX is success and show up as XXNNN… sequence as number, ranges from 0-9; its value is the same as M. NNN… means restricted number segment. Packing List With the Fixed Wireless Terminal, there are some accessories. When you get the terminal please check them and to see whether you have all of them. Please contact us or call the distributor in your area to receive the absent parts if you find that you lack one of them as below: Name Quantity Remark DC adapter 1pcs DC5V/1A Antenna 1pcs User Manual 1pcs Page 16 of 16 English FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. -4-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : Eric Create Date : 2017:11:08 14:06:23-05:00 Modify Date : 2018:02:13 18:32:46-08:00 Subject : Flyscale Language : en-US Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Microsoft® Word 2016 Format : application/pdf Title : GSM User Manual Creator : Eric Description : Flyscale Creator Tool : Microsoft® Word 2016 Metadata Date : 2018:02:13 18:32:46-08:00 Document ID : uuid:05B469E6-BD90-475B-B33D-76A63AB42DD6 Instance ID : uuid:31c5fa43-e808-445c-a0ae-12ccc1b09ec1 Page Count : 17EXIF Metadata provided by EXIF.tools