XIA MEN JOYATECH S2 Wearable Bluetooth Speaker User Manual 15 S2 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3525075
Application ID	LvNsKhKtuHcP8SHe4jhRzA==
Document Description	15_S2 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	92kB (1150057 bits)
Date Submitted	2017-08-24 00:00:00
Date Available	2017-08-24 00:00:00
Creation Date	2017-08-12 10:23:39
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-08-12 10:23:39
Document Title	15_S2 UserMan
Document Creator	Adobe Illustrator CC 2015 (Windows)

反面
S2
3.Security Information
Wearable Bluetooth Speaker
with call function
For the sake of your personal and property safety, please read
carefully the following safety warnings and reminders, the
manufacturer shall not be liable for any loss caused by improper use
or misuse of this product.
Quick Start Guide
3.1.Fire and Explosion Hazard
Welcome to use our product. The following
detailed description will help you have a better
understanding of our product. In order to use it
correctly, please read the instructions carefully
before using it.
1.Brief introduction
1) Do not drop, disassemble, open, crush, bend, deform, puncture, tear,
microwave, fire Burn, smear or insert foreign bodies to the speaker. These
actions will result in combustion or explosion;
2) Do not expose the Bluetooth speaker to a very high or very low
temperature environment;
3) Do not expose the Bluetooth speaker for a long time under the
condition of direct sunlight;
4) Do not put the Bluetooth speakers in the vicinity of the fire, such as
stoves, candles or fireplace.
3.2.Battery / Charger Hazards
Anatomy
1) Do not put your Bluetooth speaker into a fire, Battery explosion can
cause injury or death;
2) Charge according to the QSG;
3) Do not attempt to disassemble or forcibly open the built-in battery,
as this may result in combustion or explosion.
4.Trouble Shooting
USB cap
4.1 The volume is not big enough.
MFB
Function
Operation
Power on
MFB
Pair
Press and hold the MFB key for 2 seconds.
Press MFB key for 4 seconds.
Auto shut off
No connection within 5 minutes in standby mode.
Enter pairing mode
Automatically enter the pairing state after power on.
Exit pairing mode
No pairing success within 3 minutes.
Cyclora-S2 shows in the mobile phone Bluetooth menu.
In the connection Enter standby mode after the pairing is connected.
Standby
The phone and Bluetooth are out of range.
Disconnect
Automatically
Press the MFB button for 2 seconds .
reconnect
Manually reconnect click the phone menu to correspend to the Bluetooth device.
Re-connect
Play
Music Player
Call Function
Pause
Press the MFB button during music playing.
Press the MFB key 3 times during music playing.
Skip backward
Press the MFB key 2 times during music playing.
Answer
Press MFB once when rings.
Reject
Press and hold MFB for 2s when rings.
Hang up
Press MFB during a conversation.
Low battery
Charge
Press the MFB key to play.
Skip forward
Low battery alarm
Battery low
In every 60 seconds, red light flashes once,
along with a "charge me" voice prompt.
The red light turns on till the
product shutdowns, and the voice prompts power off.
Charge
Charge with micro USB cable , red light on during charging
Full charged
Red light off, blue light on.
2.Instructions
2.1 Power on
Long press the
flashing three
MFB button for
flashing three
1) Increase the volume on the phone / Bluetooth speaker;
2) If asked to match the password, please enter "0000";
3) Make sure your phone / Device and Bluetooth speakers are fully
charged.
4.2 Voice distorted.
Manual shutdown
Pairing success
352mm
MFB key for 2S, there is a prompt of voice power on, while the blue light
times. Automatic shutdown when no pairing on standby mode, long press the
2 seconds, and there is a prompt of voice “power on”, while the blue light
times.
1) Reduce the volume of the phone / Bluetooth speaker;
2) To ensure that the battery of Bluetooth speaker is sufficient, Charge
with USB cable if there is a low power prompt.
4.3 Can not paire with Bluetooth device.
1) Make sure your phone is compatible with bluetooth;
2) Re-paire with device (see 2.3).
4.4 Signal is lost or distorted.
1) Move the Bluetooth speaker close to the phone / Device;
2) Make sure your phone / Bluetooth speakers are fully charged;
3) Bluetooth speaker and mobile phone set off, and then restart the boot.
Specification
Bluetooth version:
Bluetooth specification:
Working distance:
Playing time:
Battery:
Standby time:
Button:
LED:
USB:
Bluetooth device name:
Bluetooth compatibility:
Size:
Weight:
Waterproof:
Speaker:
V4.2
HFP, A2DP, AVRCP
About 10 meters(straight-line distance without obstacles)
About 10 hours(affected by volume and audio contents)
Polymer battery 3.7V
About 100 hours
MFB X1
Red & blue LED x1
Micro USB DC 5V 350mA
Cyclora-S2
Compatible with Bluetooth v1.1 and above
82.5*67*32mm
76.2g
IPX4
3W(maximum power)
2.2 Power off
When power on, long press the MFB key for 4S, and there is a “power off” prompt voice, speaker
power off after red light on.
Automatic power off when no paring on standby mode, waiting for 3 minutes, enter into
standby mode after no pairing, automatically power off after 2 minutes, there is a “power
off” prompt voice, and speaker power off after red light on.
FCC Part 15.19 Warning Statement
This device complies with part 15 of the FCC rules.Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and
2.3 Pairing
Automatically enter into pairing mode after power on, red and blue lights flashing
alternately, voice prompts “pairing”.
(2) This device must accept any interference received ,including interference that may cause undesired operation .
Enter into standby mode, after 3 minutes without connecting. After 2 minutes, a “power
off” prompt voice,red light on.
Select the appropriate device name in the phone's Bluetooth menu: Cyclora-S2 appears when paired FCC Part 15.21 Warning Statement
with “paired” prompt voice.
Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible
2.4 Standby
Enter standby mode after the pairing is connected, and the blue light flashes every 8
seconds. When phones and Bluetooth beyond the effective range there will be a voice
prompts:Speakers disconnected, Pairing.
for compliance .Such modifications could void the user’s authority to operate the equipment.
2.5 Re-connect
FCC Part 15.105 Warning Statement
Bluetooth is active on the phone, long press the MFB button for 2 seconds, speaker will
re-connect to the phone automatically when speaker power on and there will be a voice
prompt “paired”, connected state showing on the phone.
After the mobile phone Bluetooth on / failed re-connect/automatically back even beyond
the effective range, click on the menu to correspond mobile phone Bluetooth devices.
There will show connected on the phone and voice prompt “paired”.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
2.6 Music Playing
When standby in music playing mode, press the MFB button to start playing the music in
the mobile phone.
Pause music:
press the MFB button to pause the current music playing.
Skip backward: press the MFB for 3 times to switch to the backward song.
Skip forward: double-press the MFB key to switch to the next song.
15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment used in portable exposure condition without restriction.This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
2.7 Call Functions
— Reorient or relocate the receiving antenna.
Press MFB once when rings.
— Increase the separation between the equipment and receiver.
Press and hold MFB for 2s when rings.
Press MFB during a conversation.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
2.8 Low Battery
— Consult the dealer or an experienced radio/TV technician for help.
Low battery alarm, In every 60 seconds, red light flashes once, along with a "charge me”
voice prompt.
Automatic "power off”, the red light turns on till the product shutdowns, and the voice
prompts "power off”.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.
2.9 Charge
Charge with micro USB cable , red light on during charging.
When full charged, red light off, blue light on.
210mm
70g双胶纸，双面印刷
ztt
S2 说明书
V1.0
20170330
70g双胶纸，双面印刷
61S200DH00YS000

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Format                          : application/pdf
Title                           : 说明书  (英文）认证
Metadata Date                   : 2017:08:12 10:23:39+08:00
Modify Date                     : 2017:08:12 10:23:39+08:00
Create Date                     : 2017:08:12 10:23:39+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Windows)
Thumbnail Width                 : 136
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 14497 bytes, use -b option to extract)
Instance ID                     : uuid:181378d9-1055-4f2c-a286-c64b32a3c91c
Document ID                     : xmp.did:d13d3987-871b-2c42-924f-0c97573cc049
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:7f850597-03d7-4838-ba1c-3d96aeb3305a
Derived From Document ID        : xmp.did:83d2df31-f8b6-4a4e-bbfc-c92d54c207e9
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:d14cbd78-f7f9-654b-ba5d-a613a1c3fb34, xmp.iid:d13d3987-871b-2c42-924f-0c97573cc049
History When                    : 2016:11:23 18:17:45+08:00, 2017:08:12 10:23:35+08:00
History Software Agent          : Adobe Illustrator CC (Windows), Adobe Illustrator CC 2015 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 298.450000
Max Page Size H                 : 500.238889
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, BebasNeue, Cambria, Candara, HelveticaLT-Light, HelveticaInseratLT-Roman, NewsGothicBT-BoldExtraCondensed, SimHei, SimSun, MicrosoftYaHei, FZXH1JW--GB1-0
Font Family                     : Arial, Bebas Neue, Cambria, Candara, Helvetica LT Light, HelveticaInserat LT, News Gothic Extra Condensed BT, 黑体, 宋体, 微软雅黑, FZXH1JW -GB1-0
Font Face                       : Regular, Regular, Regular, Regular, Regular, Regular, Bold, Regular, Regular, Regular, -GB1-0
Font Type                       : Open Type, Open Type, TrueType, Open Type, TrueType, TrueType, Open Type, Open Type, TrueType, Open Type, Unknown
Font Version                    : Version 5.06, Version 1.101, Version 5.96, Version 1.01, Version 6.1; 2002, Version 6.1; 2002, 003.001, Version 5.01, Version 5.03, Version 6.02, Version 5.03
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : arial.ttf, BebasNeue.otf, cambria.ttc, CANDARA.TTF, Helvetica LT Light.ttf, Helvetica Inserat LT.ttf, NewsGothicBT-BoldExtraCondensed.otf, simhei.ttf, simsun.ttc, msyh.ttf, simsun.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Black M
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 15.00
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 17.0
For                             : Administrator,
Bounding Box                    : 1490 -1218 2222 159
Container Version               : 11
Creator Version                 : 19

EXIF Metadata provided by EXIF.tools