XING DA ELECTRONICS 7199-59 Commander Bluetooth Speaker User Manual

XING DA INTERNATIONAL ELECTRONICS LIMITED Commander Bluetooth Speaker

User Manual

size:130x170mm6. Led show1 Blue color flash quickly powered on / pairing2) Blue color bright all the time------Bluetooth connected3) Blue color flash slowly------line-in model4) Red color------in charging) ------7. WarningsCharge and operate only as indicated in this manual as improper use may result indamage to the product or injury.Do not exceed the volume of the speaker as it cause permanent damage.Do not short out this product or disassemble by yourself to avoid danger or shocks.Do not insert any objects into the sound box.Keep out of reach of children and maintain supervision if young child are using.Avoid over-extending the speaker and cable. Do not pull the speaker and cable with force.Made in ChinaFront Back2.Package details1) Speaker unit2) User manual3) Cable3 Technical details1 Power Supplier: DC5V2) Output power: 2W (1KHz,THD10%)3) Frequency: 200Hz—20KHz4) Impedance: 4Ω5) Speaker driver size: 36mm6) Product size: Dia5*H5.5cm.)4 Operation1 Bluetooth model     When this device powered on, the blue led is flashed quickly, it means bluetoothpairing, now you can search by your device with computer or  mobile, the searchingname is "Commander" ,connect it and play music on your computer or mobile, then you     can enjoy the wonderful bass music from this speaker..)2 Line-in model     Can play music by link to mobile phone、MP3、MP4、PC、IPOD and other audiodevices.)5 Key functions1 keya) Long press, powered on / offb) Short press two times continuously, change Bluetooth model to line-in modelc) Short press, answer / reject the call2) keya) Long press, volume decreaseb) Short press, last song.)User's ManualCommander Bluetooth Speaker              7199-591 Introduction    For your convenient using, please make sure to read this manual in advance..FCC Warning:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device canbe used in portable exposure condition without restriction. 3 keya)  Long press, volume increaseb) Short press, next song)

Navigation menu