XINGDASHINE ELECTRONICS LBP-024 PS3 wireless controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1238860
Application ID	RDNtAKTQsQ90R0vSnJtkmg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.4kB (129991 bits)
Date Submitted	2010-02-08 00:00:00
Date Available	2010-02-08 00:00:00
Creation Date	2010-02-08 14:47:56
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-02-08 14:47:56
Document Title	Microsoft Word - user manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	os

Wireless Controller for PS3
BRIEF OVERVIEW
The PS3 wireless controller is specially designed for the Sony PS3. It uses 2.4
GHz radio frequency (RF) with 3D motion sensor & rumble technology.
PRODUCT INTRODUCTION
Package Content：
- PS3 wireless CONTROLLER x 1
- Wireless Receiver x 1
- User Manual x 1
Requires x2 AAA Batteries
(Batteries not included)
button to active the controller on PS3 console.
To maintain the connection between the PS console and controller
please leave the Wireless Receiver in the console at all times. Then when
you restart your console and want to re-connect your controller press the
PS button, and this will reactivate the controller.
2. Wireless Game Controller Power Control
The power switch of the wireless game controller is situated at the back
right side of the controller. Position the switch to “ON” to switch on the
power and “OFF” to switch off the power.
3. 3D Motion Sensor Function & Rumble
Use the controller 3d motion sensor to control the direction and rumble
(the game should support the Sixaxis & DualShock3 function for this to
work) Please switch on both functions using in “in game options menu”
PRODUCT FEATURES
1. Support multiple signal transmissions without interference;
2. Support Digital Mode and Analog Mode
3. Operation distance up to 10 meters;
4. Controller 3D Motion Sensor
5. Controller Rumble
OPERATION INSTRUCTIONS
1. Connect RF receiver with PS3 Game Console & Controller
Plug the receiver into the USB port of the PS3 game console and then
turn on the console, you will find the Red LED on the receiver flashing,
press the CONNECT button on the receiver first and then switch the
controller ON, press the controller SELECT and L3 button together for
three seconds let go, the receiver will then automatically search for the
connecting signal from the wireless game controller. When the controller
connects the receiver the Red LED will stay ON.
After the controller successfully connects to the receiver, press the PS
5. Operation on PS3 console
a. Press the PS button when entering the game, choose the “Assign
Controllers Ports” on the function menu, then press the X button once,
the PS3 will give you a number menu to choose, use the up/down
button on the controller to choose the port, and press X button to
confirm, now the indicator LED on the controller will turn on, it means
the controller already setup successful, then press the X button back
to the game.
b. A list of channels with its corresponding LED indicators is as follows
Channel 1 - LED Indicator 1
Channel 2 - LED Indicator 2
Channel 3 - LED Indicator 3
Channel 4 - LED Indicator 4
Channel 5 - LED Indicator 1 & 4
Channel 6 - LED Indicator 2 & 4
Channel 7 - LED Indicator 3 & 4
PRECAUTIONS AND MAINTENANCE
Please review the following guidelines to ensure optimal performance of
the product.
1. Please make sure there is no extreme pressure put on this product.
2. Don’t dismantle this product without permission.
3. This product should be situated away from heat sources such as
radiators and heaters.
4. Keep this product dry and avoid contacting with damp or wet areas.
PlayStation3/PS3 is a registered trademark of Sony Computer Entertainment Inc
"Polaroid" and "Polaroid and Pixel" are trademarks of PLR IP Holdings, LLC.
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment. NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: -- Reorient or relocate the receiving
antenna. -- Increase the separation between the equipment and
receiver. -- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. -- Consult the dealer or an
experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2010:02:08 14:47:56+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:02:08 14:47:56+08:00
Format                          : application/pdf
Title                           : Microsoft Word - user manual.doc
Creator                         : os
Document ID                     : uuid:988cb352-499e-42c4-a1e7-83853885130a
Instance ID                     : uuid:f6064322-8628-44a3-83d6-ab7540e4f6ac
Page Count                      : 3
Author                          : os

EXIF Metadata provided by EXIF.tools