XQ ARTS TOYS XQ3499TX49MH TOY RC MONSTER SPINNING CAR User Manual Full page photo

Download:
Mirror Download [FCC.gov]
Document ID	2664667
Application ID	lRVcktiKM1ks87EqLegfEQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.62kB (2895253 bits)
Date Submitted	2015-07-02 00:00:00
Date Available	2015-07-02 00:00:00
Creation Date	2015-06-18 13:30:32
Producing Software	PDFCreator 2.0.0.0
Document Lastmod	2015-06-30 15:33:46
Document Title	Full page photo
Document Creator	PDFCreator 2.0.0.0
Document Author:	terry.tang

5: Thank you for choosing our toy RIC car. To ensure correct and pleasant operating,
please read through the following instructions to understand the product before use.
A CAUTION:
OELECTRICALLY OPERATED PRODUCT
Not recommended for children under 8 years of age. As with all electric products,
precautions should be observed during handling and use to prevent electric shock.
OADULT SUPERVISION REQUIRED
Wamlng: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Contents: VehicleX1, TransmitterX1, AntennaX1, Charger X1, Rechargeable battery packX1
Ewto recharge the battery pack
I. The new NiCd or NiMH battery pack is not charged prior to shipping.
I Plug the charger into a standard indoor electrical outlet. Insert the
j nt of the battery pack in the charger’s joint.
I. Allow battery pack to be charged for a minimum of 1.5 hours for the
first and second charges; subsequent charges require 1 hour.
Do not over-charge the battery pack. Charging the battery pack for
a longer period will not increase the battery charge life.
I. Battery chargers used with the toy are to be regularly examined. For damage to the cord. plug. enclosure
and other parts, the toy must not be used with this charger until the
damage has been repaired.
Kansmitter and Vehicle operation
I Rlchargublv bam'y‘iioinl
l chugu'. joint
PERFORMANCE
CHANGE BATTERY
Operating Tips:
0 Please make sure the power switch Is in the ON position
when you operate, and OFF position when not in use.
niounmsvm elf the car goes left, please adjust the steering alignment
"’ fl lever to right until the car goes straight.
\ "an.
(”mmhmm) sit the car goes right, please adjust the steering alignment
lever to left until the car goes straight.
fatten and Antenna Installation - Transmitter and Vehicle
picture 1
1. Install one 9V battery with polarity (+I-) as shown
inside batter compartment (see picture 1).
2. Follow the arrowhead to close the remote
control’s battery cover.
3. Locate the antenna mount on the top of the controller.
Insert the antenna into the mount opening and rotate
in a clockwise direction until snug (see picture 2).
4. Install rechargeable battery pack inside the battery
compartment (see picture 3).
5. Tighten battery door with a battery snap.
picture 2 Picfllre 3
IHoIMto play
1. Install the rechargeable battery inside the battery compartment that is
underneath the chassis, taking care to observe the polarity. Fit back the cover.
2. Insert 9V battery inside the controller. The car is now ready to run.
3. Turn the two switches located on both the car and the controller to the "ON" position and then operate the car.
4. If the car does not run in a straight line, adjust the steering alignment lever located beneath the chassis.
5. When the light in the controller begins to dim, it may be time to replace the 9V battery.
6. When your RIC model car begins to lose performance, power or function, it may be time to recharge the
rechargeable battery.
[Eatery Safety Information
.Don’t short-circuit terminals.
. Don’ t recharge non-rechargeable batteries.
. Rechargeable batteries may only be charged under the supervision of an adult.
. Remove all batteries if vehicle will not be used for a long period of time.
. Dispose of batteries safely. Don’t dispose of batteries in fire as they may explode.
. The battery charger used should be regularly examined for damage to the cord, plug,
enclosure and other parts. In the event of damage do not use it until it has been repaired.
. Exhausted batteries are to be removed from the toy.
. Keep these instructions for future reference: they contain important information.
.Packaging has to be kept since it contains important information.
10. Rechargeable batteries are to be removed from the toy before being charged.
fifeand Maintenance
1. Always remove batteries from the toy when it is not being used for a long period of time.
2. Wipe the toy gently with a clean damp cloth.
3. Keep the toy away from direct sunlight and/or direct heat.
4. Do not submerge the toy into water that can damage the electronic assemblies.
autumn;
(OWN
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
0 Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
0 Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
0 Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.Dperation is subject to the following two conditions:
(1)this device may not cause harmful interterence,and
(2)this device must accept any interference received,
including interference that may cause undesired operation.
E“ © 2013 Xin Yu Arts Toys Co., LTD.
For more information, visit www. xq-toys.com & www.extrememachinesrc.com
E mag-.-
=Wflfimfific§£m n '
Made in China
c.uz.RcIo-1.oI.nI-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Page Layout                     : SinglePage
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : PDFCreator 2.0.0.0
Keywords                        : 
Modify Date                     : 2015:06:30 15:33:46+08:00
Create Date                     : 2015:06:18 13:30:32+08:00
Creator Tool                    : PDFCreator 2.0.0.0
Metadata Date                   : 2015:06:30 15:33:46+08:00
Document ID                     : uuid:a3154dc6-17d6-11e5-0000-18fbcf5827ab
Instance ID                     : uuid:aad91041-095d-42f5-9058-ae27a513022a
Format                          : application/pdf
Title                           : Full page photo
Creator                         : terry.tang
Description                     : 
Author                          : terry.tang
Subject                         : 

EXIF Metadata provided by EXIF.tools