XQ ARTS TOYS XQ3758TX2GB 1 10 Mustang Boss User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2986133
Application ID	YgrwYzdyooZ34TtrxlfFMg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	266.81kB (3335183 bits)
Date Submitted	2016-05-11 00:00:00
Date Available	2016-05-11 00:00:00
Creation Date	2016-04-22 16:08:43
Producing Software	Adobe Acrobat 8.0 Image Conversion Plug-in
Document Lastmod	2016-04-22 16:08:51
Document Title	User Manual
Document Creator	Adobe Acrobat 8.0

Thank you for choosing our toy RIC car. To ensure correct and pleasant operating,
please read through the following instructions to understand the product before use.
A CAUTION:
oELECTRICALLY OPERATED PRODUCT
Not recommended for children under 8 years of age. As with all electric products,
precautions should be observed during handling and use to prevent electric shock.
OADULT SUPERVISION REQUIRED
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Contemsi VehicleX1, TransmitterX1, AntennaX1, Charger X1, Rechargeable battery packX1
IHo: .w.tto recharge the battery pack
1. The new Nicd or NiMH battery pack is not charged prior to shipping.
2. Plug the charger into a standard indoor electrical outlet. Insert the
joint of the battery pack in the charger’s joint.
3. Allow battery pack to be charged for a minimum of 1.5 hours for the
first and second charges; subsequent charges require 1 hour.
Do not over-charge the battery pack. Charging the battery pack for
a longer period will not increase the battery charge life.
4. Battery chargers used with the toy are to be regularly examined. For damage to the cord, plug, enclosure
and other parts, the toy must not be used with this charger until the
damage has been repaired.
[Tirza‘n‘ismitter and Vehicle operation
. Menorah-bl. bmry‘tioim
I am "'5 oint
PERFORMANCE
CHARGE BATTERY
”Marina... Operations Tips:
0 Make sure the power switch is in the on position
when you operate. and OFF position when not in use.
eWhen the ear goes Iett, adjust the Trim Lever to right
until the car goes straight.
oWhen the ear goes right, adjust the Trim Lever to Iett
until the car goes straight.
IH w-to install batteries- Transmitter and Vehicle
1.0pen the battery cover with the snap.(See picture 1)
2.Install two AA batteries with polarity(+/—) as shown inside battery compartment.(5ee picture 2)
3.lnstall rechargeable battery pack inside the battery compartment.(5ee picture 3)
4.Close the battery cover with the snap.
plcture1 plcture 2
picture 3
[who play
1.Install the rechargeable battery inside the battery compartment underneath the chassis , with observing
polarity. Fit back the cover.
2.lnsert AA battery inside the transmitter.
3.Switch on the car with the ON/OFF switch. Then switch on the transmitter, the LED light will flash rhythmically.
After a few seconds, the LED light on the transmitter will stop flashing, meaning communication between the
car and the transmitter has been established.
4.When the car does not run in a straight line, adjust the trim lever located beneath the chassis.
5.When the light in the transmitter begins to dim, it may be time to replace the AA battery.
6.When your RIC model car begins to lose performance, power or function, it may be time to recharge the
rechargeable battery.
ElfittEry Safety Information
1. Don‘t short-circuit terminals.
Don’t recharge non-rechargeable batteries.
Rechargeable batteries may only be charged under the supervision of an adult.
Remove all batteries if vehicle will not be used for a long period of time.
Dispose of batteries safely. Don‘t dispose of batteries in fire as they may explode.
The battery charger used should be regularly examined for damage to the cord, plug,
enclosure and other parts. In the event of damage do not use it until it has been repaired.
7. Exhausted batteries are to be removed from the toy.
8. Keep these instructions for future reference: they contain important information.
9. Packaging has to be kept since it contains important information.
10. Rechargeable batteries are to be removed from the toy before being charged.
Wand Maintenance
1. Always remove batteries from the toy when it is not being used for a long period of time.
2. Wipe the toy gently with a clean damp cloth.
3. Keep the toy away from direct sunlight and/or direct heat.
4. Do not submerge the toy into water that can damage the electronic assemblies.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
0 Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
0 Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
0 Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user‘s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.0peration is subject to the following two conditions:
(1)this device may not cause harmful interference.and
(2)this device must accept any interference received,
including interference that may cause undesired operation.
L\‘ '© GuangDong Xin Yu Technology Industrial 00. ,L.TD
For more information, visit www.xq -toys.com & www.extrememachinesrc.com
95"??N.
Made in China
ca: Rc1n~1.01.n1«n1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2016:04:22 16:08:51+08:00
Create Date                     : 2016:04:22 16:08:43+08:00
Metadata Date                   : 2016:04:22 16:08:51+08:00
Creator Tool                    : Adobe Acrobat 8.0
Format                          : application/pdf
Document ID                     : uuid:3a11c4fe-a04f-4d15-8a4c-fc6820293cd1
Instance ID                     : uuid:f7c48ffe-6dbd-48e5-8459-9434dfc9ed21
Producer                        : Adobe Acrobat 8.0 Image Conversion Plug-in
Page Count                      : 1
Creator                         : Adobe Acrobat 8.0

EXIF Metadata provided by EXIF.tools