XSOUND Innovation Technologies C1 Bluetooth headphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2821309
Application ID	xtbierNmY4d7sRp/pnsb5Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	49.18kB (614739 bits)
Date Submitted	2015-11-24 00:00:00
Date Available	2015-11-25 00:00:00
Creation Date	2015-11-09 17:44:48
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2015-11-23 19:35:30
Document Title	User Manual
Document Creator	CorelDRAW X6
Document Author:	Administrator

Table of contents
BLUETOOTH EAR BUDS
C1 USER MANUAL
1 Introduction
2 Package content
3 Connection diagram
4 The way to change earhook
5 How to use
5.1 General functions
5.2 Pairing to mobile phone
5.3 Charging your device
6 Technology specification
7 After-sales service and support
8 FAQ
C1 USER MANUAL
3.Connection Diagram
1.Introduction
Safety Rules
1\ Please follow the rules depicted in this manual closely
to ensure your safety. Before using this Ear Buds, we
would strongly encourage you to read through this user
manual.
2\ Be more wary of any edges, uneven surfaces, metal
parts, accessories and its packaging so as to prevent
any possible injury or damage.
3\ Do not modify, repair or dismantle this Ear Buds.
Doing so may result in fires, electric shocks,
complete breakdown of this Ear Buds, etc. All
of which, are not covered under warranty.
4\ Do not use any diluents or volatile liquid to clean the
Ear Buds
5\ Do not use the Ear Buds in a hazardous location.
Desired Result
Play / pause
Next/Volume up
Factory reset
Turn on/Play /
pause/Turn off /
Answer call/
End call/
Reject call/
Transfer call voice
Last number redial
Previous/Volume down
4.The way to change earhook
5.How to use
5.1.General Functions
Desired Result
Turn on
1X Wireless Ear Buds C1
1X USB Charger cable
1X User Manual
C1 USER MANUAL
USB
Thank you for choosing the Stereo Ear Buds. This manual
will help you operate the Ear Buds, but you should first
familiarize yourself with the Bluetooth functionality of your
mobile phone or other devices before using the Ear Buds.
2.package content
C1 USER MANUAL
Required Action
Press the “ ” button for 3 seconds when
the device is off. (Red LED slowly flashes
and a tone voice beeps)
Enter the pairing
mode
When the device is off, Press the “ ” button
for 6 seconds.(Blue LED and Red LED
quickly flash alternately with two beep tone voice).
Pairing
In pairing Mode use a Bluetooth function
mobile phone or other Bluetooth Master
Device and to perform pairing action
(detail refer to the chapter about pairing)
Next /
Volume up
Previous /
Volume down
Turn off
Required Action
Short click “ ” to play when the device is
pausing and short click “ ” to pause when
the device is playing.
Short press the “+” button for Next music
Long press the “+” button for Volume up
Short press the “-” button for Previous music
Long press the “-” button for Volume down
Press the “ ” button for 3 seconds when
the device is on.(A tone voice beep and all
LED is off)
Low battery
warning
The Red LED flash
Charging
Plug the charger to port of the device.
(Red LED is on)
Short Press the “
” button while a call
Answer call
coming
Short Press the “ ” button while on going
End call
call
Double Press the “ ” button to transfer
Transfer call voice the call voice between the mobile phone
and device while on going call
Press the “
” button for 1~2 seconds
Reject call
to reject call when the call is ringing
Battery status will be shown on the top right
Battery power
corner of the phone screen after connected.
indication
(Only support iphone, iPad)
Short press the “ ”button to enable Multipoint
Enable/Disable
at pairing modeDouble press the “ ” button to
Multipoint
disable the Multipoint at pairing mode
C1 USER MANUAL
Desired Result
Factory reset
Required Action
Long press“+”button for 6 seconds at pairing
mode to clear the paired device list.
Last number redial Double click“
”button on connect state.
5.2.Pairing to Mobile phone or other device
To use your Ear Buds , you must first pair your Ear Buds
with a phone or a computer. Once your Ear Buds is paired
to a specific mobile phone, they will remain paired and
automatically recognize each other whenever they
are within range.
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function
is activated
Turn on the Ear Buds go to the paring mode.
Search your Bluetooth devices on your phone by
following the phone's instructions. Refer to your phone's
user manual for more information.
After a few second the phone will list the device as a
discover device. Select it and follow your phone
instruction to select this pairing.
Then your phone will request a passkey or PIN, enter
0000 as your PIN or passkey.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
your phone, then your can hear all the sound or music
form the device. Also you can control the player by
operating the device. Example, volume up and next music.
C1 USER MANUAL
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your
computer, a Bluetooth adapter is necessary. Fix the
adapter with your computer and ensure its Bluetooth
function is activated.
Turn on the device and go to the paring mode.
Open the Bluetooth software (such as BlueSoleil)
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetooth software for more information.
After a few second the “ device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“pairing” item,then select “connect with audio device” with
same operation.
Open your media player to play music, watch
TV/move and play game, then all the sound will be
playback on your device.
C1 USER MANUAL
Warning:
You must select a qualified charger from a regular manufacturer.
You must charge the Ear Buds if it has been not used for more
than 12 months.
Please don't use the USB charger on any other phone jack device
6.Technical specification
Value
Parameter
RF Range
10 m
Frequency Response
40Hz-20KHz
Receiver Output
10mW
Signal-To-Noise
≥90dB
5.3.Charging your device
Distortion
≤3.0%
The device is convenient to connect to AC charger or a USB
charger with Micro USB port marked with.Make sure that
your device is full charged for at least 6 hours before initial
use. Insert one terminal of your charger to AC main or USB
port of PC and other terminal to Micro USB . While charging,
the red LED light constantly. When charging is completed,
the indicator LED turns red to blue.
Playback Time
About 5.5 Hours
About 1.5Hours
555.8X27X18mm
14.5g
Charging Time
Dimension(L×W×H)
Weight
7. After-sales
C1 USER MANUAL
8.FAQ
1\Why is there no power even when the Ear Buds is power
on?
Ans: Ensure the battery is being charged up to 6 hours for
first time using. The LED is lighted when it starts
charging.
2\There is no sound when playback.
Ans: Check the connection between your device with
phone or computer, if the connection is not
established, please reconnect again. Make sure the
Ear Buds is paired and connected with your
target phone or other master device.
3\How can I know the Ear Buds has been fully charged?
Ans: When the indicator LED turns red to blue when it is
charging, it has been fully charged.
4\why the Ear Buds cannot connect with second phone?
Ans: Please set the Ear Buds to multipoint mode.
Connect the Ear Buds to phone A,
Once again enter to pairing mode (phone one, will
disconnect), and connect the Ear Buds to phoneB.
and then use phone A paired device list to reconnect
to the Ear Buds .
service and support
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following
MEASURES:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
FCC RF warning statement: The device has been evaluated
to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
If your device is not performing as it should,please take it to
your local service providers or dealer for service.
WARNING: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the
party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Title                           : 未命名 -1
Create Date                     : 2015:11:09 17:44:48+08:00
Creator Tool                    : CorelDRAW X6
Modify Date                     : 2015:11:23 19:35:30+08:00
Metadata Date                   : 2015:11:23 19:35:30+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:8853752a-257c-470c-99ca-bfd943f04cf5
Instance ID                     : uuid:b80a82df-6a38-4698-a51e-6c9a506c272d
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Author                          : Administrator

EXIF Metadata provided by EXIF.tools