XSOUND Innovation Technologies H2A Bluetooth Headphone User Manual 1

XSOUND Innovation Technologies Co., Ltd. Bluetooth Headphone 1

Users Manual

Reject callPress the ”MFB” buttonfor 1-2 secondstorejectcallwhenthecallisringingAnswer call Last number redialDouble click the ”MFB” button In the connected state or there is musicDesired Result Required ActionVolume upTransfer call voicePlay/pauseNextShort click the ”+” buttonDouble click the ”MFB” button to transfer the call voice between the mobile phone and device while ongoing call.Click ”MFB” button to play music  when the device is connected or pausing and click ”MFB” button to pause when the device is playing music.Short click “>” button for next music.Charging Plug the charger to port of the device(Red LED is on).正面:Table of contents1   Introduction2   Kit Contents3   Connection Diagram4   How to use    4.1   General functions    4.2   Pairing to mobile phone    4.3   Charging your device5   Technical specification6   Service and Support7   FAQ1112223566513.Connection Diagram2 36.Service and SupportIf you device is not working properly, please contact the local service providers or dealer for service.7. FAQ1\ Why is there no power even when the Headphone is power on?Ans: Ensure the battery is being charged up to 6 hours for first          time using. The LED is lighted when it starts charging.2\There is no sound when playback.Ans: Check the connection between your device with phone          or computer, if the connection is not established, please          reconnect again. Make sure the Headset is paired and          connected with your target phone or other master device.3\How can I know the Bluetooth Headphone has been fully charged?Ans: When the indicator LED turns from red to blue during          charging ,this indicate the battery has been fully charged.4\Why the headphone cannot connect to second phoneAns: Please set the headset to pairing mode and short press          the “MFB” to  enable multipoint mode. Connect the          headset to phone A, Restart  the headset to pairing mode          and connect the Headphone to phone B, and then use phone  A  paired device list to reconnect to the headphone.You must select a qualified charger from a regular manufacturer.You must charge the Bluetooth Headset if it has been not used for more than 12 months.Warning:Stereo BluetoothHeadphoneH2A/H2C/H2D/H2E USER MANUAL1. IntroductionCongratulations, and thank you for choosing the Bluetooth Headphone . This manual will help you operate the Bluetooth Headphone, but you should familiar with theBluetooth function of your mobile phone or other master devices before using the Bluetooth Headphone.Safety Rules1\To ensure safety, please follow this user manual, westrongly recommend the users to read this manual before using the Bluetooth headphone.2\Be more wary of any edges, uneven surfaces, metalparts, accessories and its packaging so as to prevent any possible injury or damage.3\Do not modify, repair or dismantle this BluetoothHeadphonet. Doing so may result in fires, electric shocks,complete break down of this Bluetooth Headphone, etc. Allof which, are not covered under warranty.4\Do not use any diluents or volatile liquid to clean theBluetooth Headphone.5\Do not use the Bluetooth Headphone in a hazardouslocation.2.Kit Contents1X Bluetooth  Headphone H2A/H2C/H2D/H2E1X USB Charger Cable1X User Manual    Turn on the Bluetooth Headphone go to the paring mode.    Search your Bluetooth devices on your phone by    following the phone's instructions. Refer to your phone's     user manual for more information.    After a few second the phone will list the device as a     discover device. Select it and follow your phone     instruction to select this pairing.Your phone will confirm the pairing, and then press Yes/Ok.        Finally, select to connect with device from your phone.    You can play music, watch TV/movie and play game with     your phone, then your can hears all the sound or music     form the device. Also you can control the player by      operating the device. For example: volume up or next      music.44.3. Charging your deviceThis Headphone use USB to Micro USB charger. It is conve-nient to connect to AC charger or a USB Charger. Make sure that your device is full charged at least 6 hours at first time use. Insert one terminal of your charger to AC or PC USB port and other Connect to headset, when the headset  in charging the red LED light constantly. When charging is completed, the red LED turns off and the Blue Led turn on.56Parameter ValueCharging Time about 3 hoursDimension (L×W×H)Weight about 130g(H2A)about 125g(H2C)Playback Time about 12.5 hoursDistortion ≤1.0% End call Short clickthe ”MFB” buttonwhileongoingcall.Low battery warning The red LED flash.4.How to use4.1. General FunctionsTurn on Turn offEnter the pairing modeDesired Result Required ActionPress the ”MFB” button for 3 seconds when the device is on.(a tone voice beep and all LED is off)Press the ”MFB” button in power off mode and hold on for 5 seconds.(Blue LED and Red LED quickly flash alternately with two beep tone voice).4.2. Pairing to Mobile phone or other deviceHeadphoneispaired to a specific mobile phone; they will remain paired and automatically recognize each other whenever they are within range.Pairing to a phone and Entertainment:    Turn on your phone and ensure its Bluetooth function     is activatedPairing to a computer and Entertainment:    If there is no Bluetooth function supported by your computer,     a Bluetooth adapter is necessary. Fix the adapter with your     computer and ensure its Bluetooth function is activated.   Turn on the device go to the paring mode.   Open the Bluetooth software (such as BlueSoleil) Which is    installed on your computer, and selects “Search your    Bluetooth devices” function. Refer to user manual of the    Bluetooth software for more information.   After a few second the “device name” will list in Bluetooth    software of your computer as a discover device.   Select this icon and click right button of mouse to select    “Pairing” item, then select “connect with audio device”   with same operation.    Open your media player software to play music, watch TV/    move and play game, then all the sound will be playback on     your device.5.Technical specificationBluetooth Specification Bluetooth Profile Parameter Value80Hz-20KHzRF Range≥90dBFrequency Response Loudspeaker Output 20mWSignal-To-Noise10 mH2A/H2C/H2D/H2E USER MANUAL H2A/H2C/H2D/H2E USER MANUAL H2A/H2C/H2D/H2E USER MANUAL H2A/H2C/H2D/H2E USER MANUAL H2A/H2C/H2D/H2E USER MANUAL H2A/H2C/H2D/H2E USER MANUAL165.7x161.5x50mmNextCharg ing Previ ousPress the ”MFB” button for 2 seconds whenthe device is off. (Red LED light and a tone voice beep)Pairing  In pairing Mode use a mobile phone with Bluetooth function or other Bluetooth Master Device and to perform pairing action(detail refer to the chapter about pairing).Short click ”MFB” the button while the incoming cal.PreviousFast backwardFast forwardShort click“<” button for Previous music.Press the “<”button don't loosePress the “>”button don't looseMulti-point connectionIn pairing mode, short click the “MFB” to enable the multipoint and double click the “ MFB” to disable the Multipoint.Volume down Short click the ”-” buttonA2DP1.2 AVRCP1.4 HSP1.2 HFP1.6DSP CVC6.0 Noise and Echo reduction Bluetooth V4.0MICMFB(M ulti Function B uttons)Tur n on/Tur n off /Enter t he pairing mode /Play / pa use/Answe r call/End call /Rejec t call/Tran sfer call vo ice/Last n umber redialVolume d ownVolume u pFactory reset Under the pairing mode Long press “MFB ” and”-” button for 5 second at the same time .To use your Bluetooth Headphone,youmustfirstpairyourHeadphonewithaphoneoracomputer.OnceyourBluetooth Facto ry reset6H2A/H2C/H2D/H2E USER MANUALWarning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device,pursuant to Part 15  of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this  equipment does cause harmful interference to radio or television reception,which can be determined by turning the  equipment off and on, the user isencouraged to try to correct  the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and     receiver.-- Connect the equipment into an outlet on a circuit different    from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help    The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu