XSOUND Innovation Technologies H7 Bluetooth stereo headphone User Manual H7 FCC R1
XSOUND Innovation Technologies Co., Ltd. Bluetooth stereo headphone H7 FCC R1
User manual
BLUETOOTH STEREO HEADPHONE
H7 USER MANUAL
1 Introduction
2 Kit Contents
3 Connection Diagram
4 How to use
4.1 General function
4.2 Pairing to mobile phone
4.3 Charging your
5
6 Service and Support
7 FAQ
device
Technical specification
1
1
2
2
2
3
5
6
6
5
1.Introduction
Congratulations, and thank you for choosing the Stereo Bluetooth
Headset H7. This manual will help you operate the Bluetooth Headset,
but you should familiar with the Bluetooth function of your mobile
phone or other master devices before using the Bluetooth Headset at
first.
Safety Rules
1\To ensure safety, please follow this user manual, we strongly
recommend the users to read this manual before using the Bluetooth
headset.
2\ Be more wary of any edges, uneven surfaces, metal parts,
accessories and its packaging so as to prevent any possible injury or
damage.
3\ Do not modify, repair or dismantle this Bluetooth Headset. Doing so
may result in fires, electric shocks, complete breakdown of this
Bluetooth Headset, etc. All of which, are not covered under warranty.
4\ Do not use any diluents or volatile liquid to clean the Bluetooth
Headset
5\ Do not use the Bluetooth Headset in a hazardous location.
2. Kit Contents
1X STEREO Bluetooth
Headset H7
1 X USB charging cable
1X audio cable
1X User Manual
1 X H7 carrying case
Table of contents
H7 USER MANUAL
01
Turn on/
Play / pause/
Turn off /
Answer call/
End call/
Reject cal/
Transfer call voicel
Charging
Volume down
Volume up
MIC
Previous
Next
3.5mm Earphone
3.Connection Diagram
Enter the pairing
mode
4.How to use
4.1General Functions
Turn on
Enter the pairing
Mode
Pairing
Desired Result Required Action
Press the “ ” button for 3 seconds when
the device is off. (Pink LED slowly flashes
and a tone voice beep)
Press the “ +” “ -” button in power on mode
and hold on for 6 seconds.(white LED and
Red LED quickly flash alternately with two
beep tone voice).
In pairing Mode use a mobile phone with
Bluetooth function or other Bluetooth
Master Device and to perform pairing
action (detail refer to the chapter about
pairing)
Turn off Press the “ ” button for 3 seconds when
the device is on.(a tone voice beep and
all LED is off)
Low battery
warning The red LED flash
Desired Result Required Action
Charging Plug the charger to port of the device.
(Red LED is on)
Answer call Short Press the “ ” button while the call coming
End call Short Press the button while ongoing call“ ”
Transfer call voice Double Press the “ ” button to transfer
the call voice between the mobile phone
and device while on going call
Reject call Press the “ ” button for 1~2 seconds to reject
call when the call is ringing
Volume up Short Press the “+” button for volume up
Volume Down Short Press the “-” button for volume down
Next Short Press “>” button for next music
Previous Short Press “<” button for Previous music
Battery power
indication
After pairing this device to iPhone The
Battery power will be indicated in your iPhone
Play/pause Short press “ ”key to play/pause the music
when the Headset is Connected
Multi-point connection In pairing mode, short press the to
enable the multipoint and double press the
MFB to disable the Multipoint
Factory reset Long press “>” “<” at pairing mode to reset
clear the paired device list
02 03
H7 USER MANUAL H7 USER MANUAL
4.2. Pairing to Mobile phone or other device
To use your Bluetooth Headset, you must first pair your
Headset with a phone or a computer. Once your Bluetooth
Headset is paired to a specific mobile phone; they will
remain paired and automatically recognize each other
whenever they are within range.
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function is
activated
Turn on the Bluetooth Headset go to the paring mode.
Search your Bluetooth devices on your phone by following the
phone's instructions. Refer to your phone's user manual for
more information.
After a few second the phone will list the device as a discover
device. Select it and follow your phone instruction to select
thispairing.
Then your phone will request a passkey or PIN;Enter 0000 as
your
PIN or passkey.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
Your phone, then your can hears all the sound or music form
the device. Also you can control the player by operating
device.
For example: volume up or next music.
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your computer,
a Bluetooth adapter is necessary. Fix the adapter with your
computer and ensure its Bluetooth function is activated.
Turn on the device go to the paring mode.
You must select a qualified charger from a regular
manufacturer.
You must charge the Bluetooth if it has been
not used for more than 12 months.
Headset
Warning:
Open the Bluetooth software (such as BlueSoleil) Which is
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetooth software for more information.
After a few second the “device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“iParing” item, then select “connect with audio device” with
same operation.
Open your media player soft to play music, watch TV/move
andplay game, then all the sound will be playback on your
device.
4.3 Line in input
H7 support 3.5mm audio jack line in when the battery low or
somewhere Prohibit the use of wireless device, When the
headset use line in, the Bluetooth will auto power off
4.4 USB audio input
The H7/H7X support USB audio input when charge with computer
or laptops, when H7/H7X connect the PC or Laptops with USB
cable, it will auto emulate as a USB audio device.
4.5. Charging your device
This Headset use USB to Micro USB charger. It is convenient to
connect to AC charger or a USB Charger. Make sure that your
device is full charged at least 6 hours at first time use. Insert one
terminal of your charger to AC or PC USB port and other Connect
to H7/H7X, when the H7/H7X in charging the red LED light
constantly. When charging is completed, the red LED turns off and
the white Led on.
H7 USER MANUAL
0504
H7 USER MANUAL
5.Technical specification
Bluetooth
Specification Bluetooth V3.0
Bluetooth Profile HFP1.6 A2DP1.2
Parameter Value
RF Range 10 m
Charging Time 2 hours
Standby time 30 days
Weight 250g
Playback Time 10 hours
Distortion ≤1.0%
≥85dB
Loudspeaker
Output 10mW
Signal-To-Noise
Dimension
(L×W×H) 176.6×188.6×71mm
60Hz-20KHz
Frequency
Response
6.Service and Support
If you device is not working properly, please contact the
local service providers or dealer for service.
7.FAQ
1 \ Why is there no power even when the Headset is power on?
Ans: Ensure the battery is being charged up to 6 hours for first time using.
The LED is lighted when it starts charging.
2 \ There is no sound when playback.
Ans: Check the connection between your device with phone or computer,
if the connection is not established, please reconnect again. Make
sure the Headset is paired and connected with your target phone or
other master device.
3 \ How can I know the Bluetooth Headset has been fully charged?
Ans: When the indicator LED turns from red to white during charging ,this
indicate the battery has been fully charged.
4 \ why the headset cannot connect to second phone Please set the
headset to pairing mode and short press the to multipoint mode
Connect the headset to phone one,
Press the “+” and “-“ button for 6second to enter to pairing mode, and
connect the Headset to phone two, and then use phone one paired device
list to reconnect to the headset.
H7 USER MANUAL H7 USER MANUAL
06 07
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
15.21
Changes or modifications not expressly approved by the party
responsible for compliance
could void the user's authority to operate the equipment.
15.105(b)
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information(MPE)
FCC RF warning statement: The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.