Xenon SM-PW712U Smart Power Plug User Manual 1

SHENZHEN XENON INDUSTRIAL LTD Smart Power Plug 1

User manual

2.Then tap "+". 3.Find "Jinvoo Smart" in the list. 4.In the new window, select your
Jinvoo Smart accounts region,
type your Jinvoo Smart account
and password, then tap "Link Now".
5. After you assign rooms for
devices .
6.Your devices will be listed in
the Home Control page.
Ok Google, turn on/off bedroom light.
Ok Google, brighten bedroom light.
Ok Google, dim bedroom light.
Ok Google, set bedroom light to red.
20 21 22
Now you can control your smart
devices through Google Home.
Take bedroom light as the example,
the supported voice commands
are as below:
Now,you can use Echo to conteol two
different smart plugs.Like Alexa,turn on
the living room/Alexa,turn on the dining
room.Alexa will turn on different devices
separtely.When you say Alexa,turn off
the living room/Alexa,turn off the dining
room.Alexa will turn off the different
devices separately.
Alexa Skils
Google Assistant
Also,you can create a group to control
these devices together.
1.Open Alexa app and click the button ,then
OK
2. Input Jinvoo Smart to search all column, 3. Click Jinvoo Smart and Enter.
J
* Click AP mode and press next step in Add device.
select the smartLife xxx for your WiFi, no need to
input password once you select the smartLife xxx
is smartLifexxx and confirm device.
FCC Warnning:
This equipment has been tested and found to comply with the
limits for a Class B digital device,
Pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.• Consult the dealer or an
experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between
the radiator and your body.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
23

Navigation menu