Xerox 490/980 Color Continuous Feed Printing System Printer Operator Guide If Not Then

• Front Cover
• Table of Contents
• Product Overview
  • Features
    • More Features
  • System Configuration
    • Simplex Printing System
    • Duplex Printing Systems
  • Component Names and Functions
    • Front Side of the Printer
    • Feeder Station
    • Printer Stations
    • Fuser Station
    • Back Side of the Printer
  • Operation Panels and Dials
    • Touch Screen
    • Power Panel
    • Feeder Station Panel
    • Printer Station Panel
    • Fuser Station Panel
    • Paper Tension Dials 1 and 2
    • Paper Tension Dial 3
    • Nip Release Sub-Lever
  • Paper Path
  • Paper Type
    • Storing and Handling Paper
  • Printable Area
• Basic Operation
  • Powering On/Off
    • Powering On the Machine
    • Powering off the machine
  • Loading Paper
    • Before Loading Paper
    • Loading Paper (for Simplex Printing System)
    • Loading Paper (for Duplex Printing System)
    • Loading Pinfed paper
  • Paper Settings
    • Creating New Paper
    • Selecting and loading paper
  • Splicing Paper
    • Before Splicing Paper
    • Splicing Paper of the Same Width
    • Duplex printing system
    • Splicing paper of different widths
    • Splicing after clearing paper jams
  • Checking If Paper Is Running Correctly
    • Checking if paper is running correctly
    • If the paper is away from the side guide
    • If the paper edge is bent, curved or folded
  • Unloading or Ejecting Paper
    • Unloading paper
    • Ejecting paper
    • Eject Setting
    • When to eject paper
  • Changing from Duplex to Simplex Configuration
  • Changing from Simplex to Duplex Configuration
• Maintenance
  • Before Starting Maintenance
    • Basic Steps
  • Clearing Paper Jams
    • Before handling paper jams
    • Steps to Clear Paper Jams
  • Adjusting Print Position
    • Adjusting Print Position
  • Adjusting Print Density
    • Adjusting Print Density
  • Color Mode Setting
    • Selecting the Color Mode
  • Pausing a Print Job
    • Pausing a Print Job with the [Stop] Button
    • Changes to Pending Jobs in Print Queue
    • Canceling a Print Job
  • Adjusting Print Quality
    • Scumming
    • Print Image Partially Missing
    • Uneven print density
    • Smudge (unclear print)
    • Uneven toner fixing
    • Irregular printed image (enlarged, reduced, overlapped, or shifted)
    • Void
    • Poor print quality shortly after power-on
    • Poor quality in hot or damp environments
    • Others
  • Adjusting the Mark Reading Position
    • Paper width measurement value < Paper width setting
    • Paper width measurement value > Paper width setting
    • Paper width measurement value = paper width setting
    • ROF mark measurement value < 0.97 mm
    • ROF mark measurement value > 0.97 mm
    • ROF mark measurement value = 0.97 mm
    • Reading Position Change Procedure
• Replacing Consumables
  • Before Replacing Consumables
  • About Consumables
    • Types of Consumables
    • Functions of Consumables
  • Procedure for Replacing Consumables
    • Checking Status of Consumable Items
    • Starting Consumable Replacement
    • Finishing Consumables Replacement
  • Supplying Toner
    • When to supply toner
    • Steps for Supplying Toner
  • Steps for Replacing Developer
    • When to Replace Developer
    • Steps for Replacing Developer
    • Batch Replacement of Developers
  • Replacing Kit A
    • When to replace Kit A
    • Steps for replacing Kit A
  • Replacing Kit B
    • When to replace Kit B
    • Steps for replacing Kit B
  • Replacing Waste Toner Containers
    • When to replace waste toner containers
    • Steps for Replacing waste toner containers
  • Replacing Transfer Roller Cleaners
    • When to replace Transfer Roller Cleaners
    • Steps for replacing Transfer Roller Cleaners
  • Replacing Smoke Filters
    • When to replace Smoke Filters
    • Steps for replacing Smoke Filters
• Cleaning
  • Before Cleaning the Machine
    • Reloading paper
  • Cleaning Procedure
  • Cleaning Items
  • Cleaning the Feeder Station
    • Steps for cleaning the idle roller
    • Cleaning the Aligning Roller
    • Cleaning the Brush near the feeder opening
  • Cleaning Printer Stations 1 and 2
    • Cleaning the Paper Transport Plates (2 for each color)
    • Cleaning around Toner Refills and Waste Toner Containers
    • Cleaning the transfer guide roller
  • Cleaning the Fuser Station
    • Before cleaning the Fuser
    • Procedure for cleaning the Fuser Station
    • Steps for Cleaning the Fuser
    • Cleaning around the Paper Exit
    • Cleaning the idle roller below the fuser
    • Cleaning the tension arm
    • Cleaning the sub driver roller
  • Cleaning the Turn Bar - All Models
• Peripheral Devices
  • Built-in Peripheral Devices
    • Compact Flash (CF) card reader/writer
  • Cautions in Using the Pre- and Post- Processing Devices
    • Power-on steps and cautions
• Appendix A
  • Optional Items
    • Hardware Options
• Appendix B
  • Printed Registration Marks
    • Color registration (ROC) mark
    • Pre-printing Registration Marks
• Appendix C
  • Procedure for Creating / Importing / Setting a Mark
    • Creating a Mark
    • Import TIFF file to the Printer
    • Setting a Mark by Imposition
• Copyright