Xerox TLST RFID MODULE User Manual 02 RRFCS users manual TLST

Download:
Mirror Download [FCC.gov]
Document ID	603995
Application ID	rYVjrKXOiMt43EMHhQjOQg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.01kB (50173 bits)
Date Submitted	2005-11-18 00:00:00
Date Available	2005-11-17 00:00:00
Creation Date	2005-11-08 12:00:52
Producing Software	pdfFactory Pro v1.39 (Windows XP)
Document Lastmod	0000-00-00 00:00:00
Document Title	Microsoft Word - 02 - RRFCS_users_manual_TLST.doc
Document Creator	http://www.fineprint.com
Document Author:	Alvin Ilarina

The Installation of RRFCS
1. Installation of RRFCS into the copying machine
1.1.RRFCS-T
RRFCS-T is the TAG and is installed on the CRU – a toner bottle .
An introduction example is shown in the following.
RRFCS-T
Toner Bottle
Fig.A-2: Attached position of RRFCS -T to toner bottle
1-1 RRFCS-C
RRFCS-C is the Coupler and is mounted to the “LB” which is inside the machine
Pictures are shown below.
Copying machine
Front Cover
LB
Toner bottles
Fig.A-1: Attached position of RRFCS -C to machine
1-2 A process to exchange
-The power supply of the machine is turned off.
-The outer cover is opened.
-The toner bottle is removed
-The RRFCS-C is removed.
2. Recommended Actions (example)
2.1.
At machine Power-ON (a single attempt is made to communicate with the RRFCS-T)
-RF-ON time – after power on
= 30 – 90 seconds
-Initialization / Access time (RRFCS-T not in range)
-Initialization / Access time (RRFCS-T in range same bottle)
-Initialization / Access time (RRFCS-T in range different bottle) =
.5 seconds
< 1 second
2 to 3 seconds
-RF-OFF time – After Initialization / Access time RF is turned off.
2.2.
1.3.
At the machine working
Access interval
= Dependent on print coverage area. Typical coverage is 6%.
-Typical Access Interval
= 125 seconds
-RF-ON time
= On as bottle is rotating typically 30 seconds
- Typical Access time
= < 1 second
-RF-OFF time
= When bottle is stopped or access time is complete.
At the machine waiting/standby
Access interval = only when a bottle is installed.
-Initialization / Access time
-RF-ON time
= See times stated in section 2.1.
= RF is turned on when the outer door closes.
It is on for up to 10 seconds (time-out) attempting to Initialize /
Access if no bottle is installed.
-RF-OFF time
= Follows time-out or initialization / access time
REGULATORY INFORMATION
FCC PART 15 COMPLIANCE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
MODIFICATIONS TO THE EQUIPMENT NOT EXPRESSLY APPROVED BY XEROX COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
ANY HOST DEVICE THAT CONTAINS THIS MODULE IS REQUIRED TO CLEARLY STATE THE
FOLLOWING ON THE OUTSIDE OF THE HOST DEVICE: “CONTAINS FCC ID: LD7TLST”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Title                           : Microsoft Word - 02 - RRFCS_users_manual_TLST.doc
Author                          : Alvin Ilarina
Creator                         : http://www.fineprint.com
Producer                        : pdfFactory Pro v1.39 (Windows XP)
Create Date                     : 2005:11:08 12:00:52
Page Count                      : 3

EXIF Metadata provided by EXIF.tools