Xerox Colorqube 8900 Users Manual PDL Reference Guide For The WorkCentre 75xx Series Customer Tip
Xerox-Colorqube-8700-Users-Manual-684680 xerox-colorqube-8700-users-manual-684680
2015-04-02
: Xerox Xerox-Colorqube-8900-Users-Manual-684729 xerox-colorqube-8900-users-manual-684729 xerox pdf
Open the PDF directly: View PDF 
.
Page Count: 28
| Download | |
| Open PDF In Browser | View PDF |
PDL Reference Guide for the Xerox ColorQube 8700/8900 Color MFP Customer Tip CQ8700-8900 July 10, 2012 Accessing Extended Features Overview This document describes how to access the extended features of the ColorQube 8700/8900 Color Multifunction Printer (MFP) in environments for which Xerox does not make a custom driver. Note: Some of the commands and syntax used in this document requires familiarity with either PostScript (PS) or Printer Command Language (PCL). This document provides the Printer Description Language (PDL) commands and syntax for each feature. The following tables are also included: features supported by the ColorQube ColorQube 8700/8900 Color Multifunction Printer commands to use in a PCL print job commands to use in a PS print job This information is not intended as a PS or PCL reference manual, but a guide for using the extended features in PS, PCL or ASCII print jobs. Using this Guide 1. Refer to the Feature List for the feature you want to implement. Select the page number to jump to that page. 2. Follow the syntax listed for the command you select. Read the “Dependencies/Caveats” section. You can access features using several methods: PCL or PS commands PJL SET commands Xerox specific COMMENT command. Feature Listing PCL and ASCII print jobs can use PJL commands or PCL commands to access the attributes of the printer. If there is more than one method listed to access a specific feature, determine the best method for your application and use that method. PostScript print jobs can use Document Structuring Commands (DSC) or PS commands. If there is more than one method listed to access a specific feature, determine the best method for your application and use that method. In this document, both PJL COMMENT and DSC are referred to as Comment commands. CQ8700-8900 Customer Support Page 1 Getting Started PCL and ASCII print jobs can use PJL commands or PCL commands to access the attributes of the device. If there is more than one method listed to access a specific feature, determine the best method for your application and use that method. Comment Commands To process all PJL COMMENT commands and DSC, enclose them with XRXBegin and XRXEnd commands. Example for a PCL or ASCII print job: @PJL COMMENT XRXbegin @PJL COMMENT OID_ATT_START_SHEET OID_VAL_JOB_SHEET_NONE; @PJL COMMENT XRXend Example PS print job: %%XRXbegin %%OID_ATT_START_SHEET OID_VAL_JOB_SHEET_NONE; %%XRXend The first parameter of the command is an attribute followed by a value. Comment commands must end with a semicolon except for the XRXbegin and XRXend commands. A comment command not enclosed by XRXbegin and XRXend is NOT a Xerox specific command and is treated as a real comment with no functional attachment to its contents. The comment commands are specific to the ColorQube 57xx Series. PJL SET Commands PJL SET commands are available for some features. If you choose to use these commands, do not enclose them with the XRXBegin and XRXEnd commands. PJL SET commands do not require a semicolon at the end of the command line. PCL Commands PCL commands are available for some features. If you choose to use these commands do not enclose them with the XRXBegin and XRXEnd commands. Refer to a PCL reference manual for more specific information regarding PCL commands. PS Commands PS commands are for some features. If you choose to use these commands, do not enclose them with the XRXBegin and XRXEnd commands. Refer to a PS reference manual for more specific information regarding PS commands. CQ8700-8900 Customer Support Page 2 Table of Contents Accessing Extended Features.............................................................................................................................................................. 1 Overview ................................................................................................................................................................................................ 1 Using this Guide ................................................................................................................................................................................ 1 Feature Listing .................................................................................................................................................................................... 1 Getting Started................................................................................................................................................................................... 2 Comment Commands.............................................................................................................................................................................2 PJL SET Commands ..................................................................................................................................................................................2 PCL Commands ..........................................................................................................................................................................................2 PS Commands .............................................................................................................................................................................................2 XRXBegin ..................................................................................................................................................................................................5 XRXEnd ......................................................................................................................................................................................................5 General Comment Commands .........................................................................................................................................................5 Job Name .................................................................................................................................................................................................5 Job Owner.................................................................................................................................................................................................5 Copies .........................................................................................................................................................................................................5 Job Type ....................................................................................................................................................................................................6 Delay Print ................................................................................................................................................................................................6 Fax Send....................................................................................................................................................................................................7 Banner Sheet (Start Sheet) ..............................................................................................................................................................8 Media Comment Commands ............................................................................................................................................................8 Media Source ..........................................................................................................................................................................................8 Media Size .............................................................................................................................................................................................10 Custom Media Sizes .........................................................................................................................................................................11 Media Type ...........................................................................................................................................................................................12 Formatting Comment Commands ...............................................................................................................................................14 Feed Edge ..............................................................................................................................................................................................14 Simplex / Duplex Printing ...............................................................................................................................................................14 Finishing Comment Commands ....................................................................................................................................................14 Offset.......................................................................................................................................................................................................14 Output Destination ...........................................................................................................................................................................15 Staple.......................................................................................................................................................................................................15 Hole Punch ............................................................................................................................................................................................16 Fold ...........................................................................................................................................................................................................16 Booklet Fold ..........................................................................................................................................................................................17 Booklet Staple .....................................................................................................................................................................................17 Image Quality .........................................................................................................................................................................................17 Print Quality ..........................................................................................................................................................................................17 Color Mode ...........................................................................................................................................................................................18 Print Job Accounting............................................................................................................................................................................18 Network Accounting .........................................................................................................................................................................18 Internal Auditron ...............................................................................................................................................................................18 Covers .........................................................................................................................................................................................................19 Front Cover Only ................................................................................................................................................................................19 Front Cover Only Media Color .....................................................................................................................................................19 Front Cover Only Media Size ........................................................................................................................................................19 Front Cover Only Media Type ......................................................................................................................................................19 Front And Back Cover ......................................................................................................................................................................19 Front And Back Cover Media Color ...........................................................................................................................................20 Front And Back Cover Media Size ..............................................................................................................................................20 Front And Back Cover Media Type ............................................................................................................................................20 Interleave ..............................................................................................................................................................................................20 Interleave Media Color ...................................................................................................................................................................21 CQ8700-8900 Customer Support Page 3 PJL/PCL Dependencies/Caveats ......................................................................................................................................................22 DSC/PS Dependencies/Caveats .......................................................................................................................................................22 Examples ....................................................................................................................................................................................................22 Basic PCL/PJL Template ................................................................................................................................................................23 Sample PCL Headers......................................................................................................................................................................24 Basic PostScript/DSC Template.................................................................................................................................................25 Supported PostScript Fonts ................................................................................................................................................................26 Supported PCL5 Fonts ..........................................................................................................................................................................28 Additional Information ........................................................................................................................................................................28 CQ8700-8900 Customer Support Page 4 REFERENCE TOPICS XRXBegin When the interpreter receives this command it begins to parse PJL COMMENT commands to check for Xerox-specific commands until it receives the command to stop parsing. PJL COMMENT Command DSC Comment Command @PJL COMMENT XRXbegin %%XRXbegin XRXEnd When the interpreter receives this command it stops parsing PJL COMMENT commands. PJL COMMENT Command DSC Comment Command @PJL COMMENT XRXend %%XRXend General Commands Job Name The value for Job Name is stored for printing on the banner page. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_JOB_NAME “string”; %%OID_ATT_JOB_NAME “string”; Where string is a maximum of 40 characters. This appears as the first item on the banner sheet. Job Owner The value for Job Owner is stored for printing on the banner page. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_JOB_OWNER “string”; %%OID_ATT_JOB_OWNER “string”; Where string is a maximum of 40 characters. This appears as the second item on the banner sheet. Copies Use the following commands to specify the number of copies or collated sets of a document. Language Collated Uncollated PS <> setpagedevice <> setpagedevice PJL @PJL SET QTY=int @PJL SET COPIES =int PCL5 No PCL5 command available, use PJL&l#X CQ8700-8900 Customer Support Page 5 Job Type The Job Type command indicates a job that requires special handling. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_string; %%OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_string; Where string is one of the following: PRINT Indicates a normal print job. PROOF_PRINT Comparable to Sample Set in a driver. This job type allows you to specify multiple copies with the @PJL SET COPIES command. One set prints for review. Then you can release or delete the job. FAX_SEND This job type directs a print job to use the embedded fax board and fax the job to a phone number instead of printing the job. See the FAX SEND command for the commands to provide the phone number and other fax options. Delay Print Delays printing a job until the time specified by the command. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_JOB_PRINT_AFTER “yyyymmddhhmmss”; %%OID_ATT_JOB_PRINT_AFTER “yyyymmddhhmmss”; Where yyyy=year, mm=month, dd=day, hh=hours, mm=minutes, ss=seconds (always 00) The default delay time is midnight, 00:00:00 CQ8700-8900 Customer Support Page 6 Fax Send Must use with the FAX_SEND Job Type command. Required Commands PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_FAX_SEND; @PJL COMMENT OID_ATT_FAX_DESTINATION_PHONE "xxxx"; %%OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_FAX_SEND; %%OID_ATT_FAX_DESTINATION_PHONE "xxxx"; Where xxxx is the phone number and any special access numbers. If a dialing prefix is added, it must be immediately followed by a pause (comma) character. Each fax number can be up to 30 characters in length. Optional Commands @PJL COMMENT OID_ATT_FAX_COVER_SHEET string; %%OID_ATT_FAX_COVER_SHEET string; Where string is TRUE or FALSE @PJL COMMENT OID_ATT_FAX_CONFIRMATION_SHEET string; %%OID_ATT_FAX_CONFIRMATION_SHEET string; Where string is TRUE or FALSE @PJL COMMENT OID_ATT_FAX_RESOLUTION int; %%OID_ATT_FAX_RESOLUTION int; Where int is: 0 – Fine Resolution 1 – Standard Resolution 2 – Super Fine Resolution @PJL COMMENT OID_ATT_FAX_TYPE OID_VAL_FAX_TYPE_string; %%OID_ATT_FAX_TYPE OID_VAL_FAX_TYPE_string; Where string is: G3_AUTO = Super G3 (33.6kbps) G3_14400 G3 = (14.4kbps) G3_FORCED_4800 = Forced 4800 bps) @PJL COMMENT OID_ATT_CREDIT_CARD "xxxx"; Where xxxx is the credit card or charge code required to send the fax. Select this option and enter the credit card number (up to 16 digits) if you want to charge the fax call to a credit card. The credit card number is concealed on confirmation reports. Characters for phone numbers, prefix numbers, credit cards, and other numeric entries. * Begin DTMF # End DTMF : Switch to DTMF mode = Wait for dial tone. ! Used to designate a mailbox signal. , Used to initiate a pause period; default pause period is 3 seconds. / Used to delineate private data. $ Signifies to wait for a confirmation dial tone. <1> Use preceding a fax number to specify which fax line should be used on systems that support dual fax lines. <2> Use preceding a fax number to specify which fax line should be used on systems that support dual fax lines. CQ8700-8900 Customer Support Page 7 Banner Sheet (Start Sheet) This command turns on/off the banner sheet that prints at the beginning of every job. It only applies to the job that contains the command; it does not affect any other jobs. If the device is configured to disable banner sheets, this command is ignored. PJL COMMENT Command DSC Command @PJL COMMENT OID_ATT_START_SHEET OID_VAL_JOB_SHEET_”string”; %%OID_ATT_START_SHEET OID_VAL_JOB_SHEET_”string”; Where string is: NONE Do not create a banner sheet for this job. FULL Create a banner sheet for this job. By default, if the START SHEET comment is not included a banner sheet is generated unless the device has banner sheet disabled. USER A custom start sheet is included in this job. Media Commands Media Source This command specifies the tray to supply the job’s media. PS <> setpagedevice where int is from the table below. PCL5 &l#H where # is from the table below. PCL6 ubyte ## attr_ubyte MediaSource Tray 1 example: 0xc0 0x04 0xf8 0x26 where ## is the hex number assigned to each selection. Tray Auto select 1 2 3 4 5 CQ8700-8900 Customer Support PS int null 1 2 3 4 5 PCL5 # 7 4, 2, 3, or 6 1 5 or 23 8 or 24 21 PCL6 0x01 0x04 0x05 0x07 0x08 0x0A Page 8 PCL5 Command Tray Mapping Tool A user with Administrator access rights to the device has the opportunity to change the PCL5 command used to identify a specific paper tray. A user can do this by opening CentreWare® Internet Services by entering the printer’s IP address in their favorite Web browser. To get to the PCL Tray Mapping page select the Properties tab Services Printing Page Description Languages PCL Tray Mapping. Once there the user is able to select which listed command will be used for a paper tray. Note: Changing the device’s default mapping may cause issues when trying to select a paper tray with the PCL 5 driver. CQ8700-8900 Customer Support Page 9 Media Size This command specifies the size of media on which to print the job. Note: some sizes may not apply to every printer model. PCL5 PS &l#A <> setpagedevice Where # is the number from the table below. Where width and height [w h] are the numbers from the table below. PCL6 Defined Paper Size (Single number) ubyte_array ubyte ## string attr_ubyte MediaSize example: 0xc8 0xc0 ## string 0xf8 0x25 where ## string is from the table below. Media Sizes PCL5 # PCL6 ## String PS [w h] Points Media Sizes PCL5 # PCL6 ## String PS [w h] Points Letter 8.5 x 11” (216 x 279 mm) Legal 8.5 x 14” (216 x 356 mm) 3 x 5 Index (76 x 127mm) 2 0x06 LETTER [612 792] B6 JIS (128 x 182 mm) 44 0x06 JIS B6 [363 516] 3 0x05 LEGAL [612 1008] 1 0x04 EXEC [522 756] 78 0x03 3X5 [216 360] 18 0x06 8.5X13 [612 936] 5 x 7” (127 x 177 mm) 8 x 10” (203 x 254 mm) 11 x 15” (279 x 381 mm) 12 x 19” (304 x 482 mm) A3 (297 x 420 mm) A4 (210 x 297 mm) 122 0x03 5X7 [360 504] 146 [576 720] 159 0x07 na-8x10 0x08 na-11x15 [792 1080] 74 0x0d na-letter-tab 0x0a na-3.5x5.5 0x03 4X6 [648 792] 144 [288 432] 149 0x08 na-12x19 [864 1368] 160 0x06 na-6x9 [432 648] 27 0x02 A3 [842 1191] 71 0x05 JPOST [284 420] 26 0x02 A4 [595 842] 72 0x06 JPOSTD [420 566] A4 Oversized (223 x 297 mm) 133 0x0b iso-a4-wide [632 842] Executive 7.25 x 10.5” (184 x 266 mm) Foolscap, Euroletter, US Folio 8.5 x 13” (215 x 330 mm) Letter Tab 9 x 11” (228 x 279mm) Postcard 3.5 x 5.5” (88 x 139mm) Postcard 4 x 6” (101 x 152 mm) Postcard 6 x 9” (152 x 228 mm) Postcard Hagaki (100 x 148 mm) Postcard Oufuku Hagaki Dbl (148 x 200 mm) Spanish Folio 215 x 315 mm 131 [609 893] A5 (148 x 210 mm) A6 (105 x 148 mm) B4 JIS (257 x 364 mm) 25 0x02 A5 [420 595] 0x1c metric215x315spanish-folio 0x04 SRA3 24 0x02 A6 [297 420] 15 0x09 STATEMENT [396 612] 46 0x06 JIS B4 [729 1032] 6 0x06 LEDGER [792 1224] B5 JIS (182 x 257 mm) 45 0x06 JIS B5 [516 729] 120 0x05 12X18 [864 1296] CQ8700-8900 Customer Support SRA3 (320 x 450 mm) Statement 5.5 x 8.5” Tabloid / Ledger 11 x 17” (279 x 431 mm) Tabloid - Oversized 12 x 18” (304 x 457mm) 155 38 [252 396] [907 1276] Page 10 Envelope Sizes PCL5 Int PCL6 int PS [W H] Points Envelope Sizes PCL5 Int PCL6 int PS [W H] Points #9 ½ Booklet 9 x 12” (228 x 304 mm) #10 4.125” x 9.5” C4 (229 x 324 mm) 180 0x10 na-9x12envelope [648 864] C5 (162 x 229 mm) 91 0x02 C5 [459 649] 81 0x05 COM10 [297 684] 90 0x02 DL [312 624] 171 0x12 iso-c4envelope-c4 [649 918] DL (110 x 220mm) Monarch 3.875” x 7.5” 80 0x07 MONARCH [279 540] NOTE: When sending a job with a media size, there must be a MEDIA COLOR “Unspecified” and MEDIA TYPE “Unspecified” PJL COMMENT command issued in the PDL. Custom Media Sizes This command specifies the custom media size on which to print the job. Insert a media size command within the PCL portion of the print job. PS <> setpagedevice where [width height] is the physical dimension of the paper at 72 points/inch (PS points) PCL5 [Esc]&f####I [Esc]&f####J [Esc]&l101A where #### is the physical dimension of the paper at 720 points/inch (decipoints). PCL6 uint16_xy x y attr_ubyte CustomMediaSize ubyte eTenthsOfAMillimeter attr_ubyte CustomMediaSizeUnits ISO B6 example: 0xd1 0xe2 0x04 0xe0 0x06 0xf8 0x2f 0xc0 0x02 0xf8 0x30 where x is the width (1/10mm) in hex (lsb, msb) and y is the length (1/10mm) in hex (lsb, msb) CQ8700-8900 Customer Support Page 11 Media Type Media types are used to distinguish the type of media a job requires. If using the Media Source command, set the Media Type command to Unspecified. PS <> setpagedevice PCL5 &n#Wdstring where # is the length of string+1, and string from the table below PCL6 ubyte_array uint16 ## ## string attr_ubyte MediaType Example: 0xc8 0xc1 0x0C 0x00 transparency 0xf8 0x27 where ## ## is the length of the string in hex (lsb, msb), and string from the table below. PS (string) value use-any use-ready stationery-lightweight stationery stationery-reloaded stationery-heavyweight transparency cardstock cardstock-reloaded cardstock-lightweight cardstock-lightweightreloaded cardstock-heavyweight cardstock-extraheavyweight envelope labels stationery-letterhead stationery-recycled other stationery-pre-printed stationery-pre-punched cardstock-lightweightglossy cardstock-lightweightglossy-reloaded cardstock-glossy cardstock-glossyreloaded cardstock-heavyweightglossy stationery-colored bond CQ8700-8900 Customer Support PCL5 examples &n8Wduse-any &n10Weuse-ready &n23Wdstationery-lightweight &n11Wdstationery &n20Wdstationery-reloaded &n23Wdstationeryheavyweight &n13Wdtransparency &n10Wdcardstock &n19Wdcardstock-reloaded &n22Wdcardstock-lightweight &n31Wdcardstock-lightweightreloaded &n22Wdcardstockheavyweight &n28Wdcardstock-extraheavyweight &n9Wdenvelope &n7Wdlabels &n22Wdstationery-letterhead &n20Wdstationery-recycled &n6Wdother &n23Wdstationery-pre-printed &n23Wdstationery-prepunched &n29Wdcardstock-lightweightglossy &n38Wdcardstock-lightweightglossy-reloaded &n17Wdcardstock-glossy &n26Wdcardstock-glossyreloaded &n29Wdcardstockheavyweight-glossy &n19Wdstationery-colored &n5Wdbond PCL6 Hexadecimal and String 0x07 0x00 use-any 0x09 0x00 use-ready 0x16 0x00 stationery-lightweight 0x0A 0x00 stationery 0x13 0x00 stationery-reloaded 0x16 0x00 stationery-heavyweight 0x0C 0x00 transparency 0x09 0x00 cardstock 0x12 0x00 cardstock-reloaded 0x15 0x00 cardstock-lightweight 0x1E 0x00 cardstock-lightweight-reloaded 0x15 0x00 cardstock-heavyweight 0x1B 0x00 cardstock-extra-heavyweight 0x08 0x00 envelope 0x06 0x00 labels 0x15 0x00 stationery-letterhead 0x13 0x00 stationery-recycled 0x05 0x00 other 0x16 0x00 stationery-pre-printed 0x16 0x00 stationery-pre-punched 0x1C 0x00 cardstock-lightweight-glossy 0x25 0x00 cardstock-lightweight-glossyreloaded 0x10 0x00 cardstock-glossy 0x19 0x00 cardstock-glossy-reloaded 0x1C 0x00 cardstock-heavyweight-glossy 0x12 0x00 stationery-colored 0x04 0x00 bond Page 12 PS (string) value PCL5 examples PCL6 Hexadecimal and String custom1 custom2 custom3 custom4 custom5 &n8Wdcustom1 &n8Wdcustom2 &n8Wdcustom3 &n8Wdcustom4 &n8Wdcustom5 0x07 0x00 custom1 0x07 0x00 custom2 0x07 0x00 custom3 0x07 0x00 custom4 0x07 0x00 custom5 Media Color Use this command to indicate the color of the media used to print a job. The strings are case sensitive with the first letter capitalized and the rest lower-case. When using a Media Source command, issue a Media Type command set to Unspecified. PS <> setpagedevice where string is from the table below. PCL5 &n#Westring where # is the length of string+1, and string from the table below PCL6 ubyte_array uint16 ## ## string attr_ubyte MediaColor Example: 0xc8 0xc1 0x20 0x00 white 0xf8 0x81 0x47 where ## ## is the length of the string in hex (lsb, msb), and string from the table below. PS String Value use-any white blue yellow green pink no-color ivory gray buff goldenrod red orange other custom1 custom2 custom3 custom4 custom5 CQ8700-8900 Customer Support PCL5 examples&n8Wxuse-any &n6Wxwhite &n6Wxblue &n7Wxyellow &n6Wxgreen &n5Wxpink &n9Wxno-color &n6Wxivory &n5Wxgray &n5Wxbuff &n10Wxgoldenrod &n4Wxred &n7Wxorange &n6Wxother &n8Wxcustom1 &n8Wxcustom2 &n8Wxcustom3 &n8Wxcustom4 &n8Wxcustom5 PCL6 Hexadecimal and String 0x22 0x00 use-any 0x20 0x00white 0x20 0x00blue 0x21 0x00yellow 0x20 0x00green 0x1F 0x00pink 0x23 0x00no-color 0x20 0x00ivory 0x1F 0x00gray 0x1F 0x00buff 0x24 0x00goldenrod 0x1E 0x00red 0x21 0x00orange 0x20 0x00other 0x22 0x00custom1 0x22 0x00custom2 0x22 0x00custom3 0x22 0x00custom4 0x22 0x00custom5 Page 13 Formatting Commands Feed Edge The values indicate the feed edge to use. Feeds paper so that Leading Edge of paper is the shorter side. PJL COMMENT Command DSC Comment Command PS @PJL COMMENT OID_ATT_FEED_EDGE string; %% OID_ATT_FEED_EDGE string; << /Leading Edge int >> setpagedevice Where string is: OID_VAL_FEED_EDGE_SHORT_LEADING OID_VAL_FEED_EDGE_SHORT_TRAILING null = use default orientation for specified /PageSize to select which edge is the top of the page. 0 = Short edge, leading edge is the top of the page. 2 = Short edge, trailing edge is the top of the page. OID_VAL_FEED_EDGE_LONG_LEADING OID_VAL_FEED_EDGE_LONG_TRAILING Simplex / Duplex Printing This command specifies if a job is to print on one side or both sides of the sheet. Choose one of the methods below for indicating this feature. Simplex/Duplex PS PCL5 PJL one-sided << /Duplex false /Tumble false >> setpagedevice&l0S @PJL SET DUPLEX=OFF two-sided longedge << /Duplex true /Tumble false >> setpagedevice &l1S @PJL SET DUPLEX= ON @PJL SET BINDING= LONGEDGE two-sided shortedge << /Duplex true /Tumble true >> setpagedevice &l2S @PJL SET DUPLEX= ON @PJL SET BINDING= SHORTEDGE Finishing Commands Offset This feature provides a physical offset of hard copy that distinguishes between sets or stacks within a job. PJL PS @PJL SET JOBOFFSET=string << /Jog int >> setpagedevice Where string is ON or OFF Where int is: 0 = no offset 3 = offset each set CQ8700-8900 Customer Support Page 14 Output Destination Indicates the output bin where the print job is sent. Note: Some output options may not be available on every product model Output Tray PS PJL Comment Command Simple Catch Tray Offset Catch Tray << /OutputType (MiddleTray) >> setpagedevice @PJL COMMENT OID_ATT_OUTPUT_BINS OID_VAL_OUTPUT_BIN_MIDDLE; Top output tray of finisher << /OutputType (TopTray) >> setpagedevice @PJL COMMENT OID_ATT_OUTPUT_BINS OID_VAL_OUTPUT_BIN_TOP; Finisher stacker tray << /OutPutType (Stacker) >> setpagedevice @PJL COMMENT OID_ATT_OUTPUT_BINS OID_VAL_OUTPUT_BIN_STACKER; Staple This command indicates use and location of staple(s). PJL COMMENT Command PS @PJL COMMENT XRXSTAPLE=string; << /Staple int /StapleDetails << /Type 1 /StapleLocation (string) >> >> setpagedevice Where string is: PORTRAIT LANDSCAPE DUAL Where int is: 0 = No Staple 3 = Staple at end of set For multiple staples (4) use the command below: @PJL COMMENT OID_ATT_FINISHING OID_VAL_FINISHING_STAPLE_MULTIPLE; CQ8700-8900 Customer Support Where string is: SinglePortrait SingleLandscape DualLandscape Multiple Page 15 Hole Punch This command indicates hole punches for a print job on a device with hole punch capability. Note: Some hole punch options may not be available on every product model. PJL COMMENT Command DSC Comment Command PS @PJL COMMENT OID_ATT_PUNCH int; %%OID_ATT_PUNCH int; << /Punch int1 /PunchDetails << /Type 6 /NumHoles int2 >> >> setpagedevice Where int is: 0 = Punch Off 1 = Punch On 2 = Use 2 Hole Punch 3 = Use 3 Hole Punch 4 = Use 4 Hole Punch Note: int 1 will be emitted to invoke the default punch setting on the device. Where int1 is: 0 = Punch Off 4 = Punch On (after each showpage or copy page operation) Where int2 is: 0 = Punch Off 1 = Punch On 2 = 2 Hole Punch 3 = 3 Hole Punch 4 = 4 Hole Punch Note: Setting NumHoles to 1 causes a punch with the default number of holes. Fold This command indicates an optional fold type generated by the professional finisher. The short edge feed command is also required to use the booklet fold command. Note: Some fold options may not be available on every product model. PJL COMMENT Command DSC Comment Command PS @PJL COMMENT OID_ATT_FOLD string; %%OID_ATT_FOLD OID_VAL_FOLD_string; << /Fold int1 /FoldDetails << /Type 5 /FoldMethod int2 >> >> setpagedevice Where string is: TRIFOLDC TRIFOLDZ ZFOLD Where int1 is: 0 = No Fold 3 = Fold at end of set Where int2 is: 1 = TriFold C 2 = TriFold Z 3 = Z-Fold HalfSheet Note: • TriFold C requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command to insure SEF feeding. • TriFold Z requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command. CQ8700-8900 Customer Support Page 16 Booklet Fold This command indicates an optional fold type generated by the professional finisher. The short edge feed command is also required to use the booklet fold command. Note: Some booklet options may not be available on every product model. PJL COMMENT Command DSC Comment Command PS @ PJL COMMENT OID_ATT_BOOKLET OID_VAL_BOOKLET_NOSTAPLE; %%OID_ATT_BOOKLET OID_VAL_BOOKLET_NOSTAPL E; << /LeadingEdge 2 /Booklet true /BookletDetails << /Type 2 /Staples 0 >> >> setpagedevice @PJL COMMENT OID_ATT_FINISHING OID_VAL_FINISHING_BOOKLET %%OID_ATT_FINISHING OID_VAL_FINISHING_BOOKLE T; @ PJL COMMENT OID_ATT_FEED_EDGE OID_VAL_FEED_EDGE_SHORT_T RAILING %%OID_ATT_FEED_EDGE OID_VAL_FEED_EDGE_SHOR T_TRAILING; Booklet Staple This command indicates staples for folded print jobs. Use with booklet fold commands above. Note: Some booklet options may not be available on every product model. PJL COMMENT Command DSC Comment Command PS @PJL COMMENT OID_ATT_BOOKLET_string; %%OID_ATT_BOOKLET OID_VAL_BOOKLET_string; << /LeadingEdge 2 /Booklet string /BookletDetails << /Type 2 /Staple int >> >> setpagedevice Where string is true or false Where int is: 0 = Do not staple 2 = 2 Staples Where string is: STAPLE NOSTAPLE Image Quality Commands Print Quality This command sets the resolution value. PS <> setpagedevice where string is one of the following. toner-saver standard enhanced highest-resolution CQ8700-8900 Customer Support Page 17 Color Mode Use this command to adjust the delivery of color rendering. PS For color: << /ProcessColorModel /DeviceCMYK >> setpagedevice For monochrome/grayscale: << /ProcessColorModel /DeviceGray >> setpagedevice PCL5 There is no page-level PCL5 command for this attribute. PCL6 There is no page-level PCL6 command for this attribute. Print Job Accounting Commands Network Accounting Allows User ID data to be sent with job for the purposes of Job-based accounting. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_ACCOUNTING_INFORMATION_AVP “XRX_USERID,xxxx”; %%OID_ATT_ACCOUNTING_INFORMATION_AVP “XRX_USERID,xxxx”; Where xxxx is actual User ID entered by user. Allows Account ID data to be sent with job for the purposes of Job-based accounting. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_ACCOUNTING_INFORMATION_AVP “XRX_ACCTID,yyyy”; %%OID_ATT_ACCOUNTING_INFORMATION_AVP “XRX_ACCTID,yyyy”; Where yyyy is actual Account ID entered by user. Internal Auditron This PJL command sends the users pin number for use by devices that support the Internal Auditron or Xerox Standard Accounting (XSA). You must provide at least a valid USERID. You may also provide a GENERAL Account number or GROUP Account number if required. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_ACCOUNTING_INFORMATION_A VP "XRX_USERID,xxxx"; %%OID_ATT_ACCOUNTING_INFORMATION_AVP "XRX_USERID,xxxx"; %%OID_ATT_ACCOUNTING_INFORMATION_AVP "XRX_GENERALACCT,yyyy"; %%OID_ATT_ACCOUNTING_INFORMATION_AVP "XRX_GROUPACCT,zzzz"; @PJL COMMENT OID_ATT_ACCOUNTING_INFORMATION_A VP "XRX_GENERALACCT,yyyy"; @PJL COMMENT OID_ATT_ACCOUNTING_INFORMATION_A VP "XRX_GROUPACCT,zzzz"; Where xxxx is a valid USER Pin number. Where yyyy is a valid GENERAL Account number. Where zzzz is a valid GROUP Account number. CQ8700-8900 Customer Support Page 18 Cover Commands Front Cover Only This command specifies a job has a front (only) cover sheet and whether the cover sheet is imaged (TRUE) or blank (FALSE). PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRST_PAGE_IMAGED “string”; %%OID_ATT_FIRST_PAGE_IMAGED “string”; Where string is TRUE or FALSE Front Cover Only Media Color This command indicates the first page of a job is to print on media of a specified color. Requires that OID_ATT_FIRST_PAGE_IMAGED is also used. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRST_PAGE_MEDIA_COLOR “string”; %%OID_ATT_FIRST_PAGE_MEDIA_COLOR “string”; Where string is one of the following. Entries are case sensitive. White, Yellow, Green, Buff, Red, Ivory, Gray, Clear, Pink, Goldenrod, Orange, Unspecified, Blue, Other, Custom1, Custom2, Custom3, Custom4, Custom5, Custom6, Custom7 Front Cover Only Media Size This command indicates the first page of a job is to print on media of a specified size. Requires that OID_ATT_FIRST_PAGE_IMAGED is also used. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRST_PAGE_MEDIA_SIZE “ww hh”; %%OID_ATT_FIRST_PAGE_MEDIA_SIZE “ww hh”; Where ww hh is one of the metric sizes listed in the MEDIA SIZE table. Front Cover Only Media Type This command indicates the first page of a job is to print on media of a specified type. Requires that OID_ATT_FIRST_PAGE_IMAGED is also used. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRST_PAGE_MEDIA_TYPE “string”; %%OID_ATT_FIRST_PAGE_MEDIA_TYPE “string”; Where string is one of the following. Entries are case sensitive. Standard, Transparency, Labels, Drilled, Recycled, Preprinted, Envelopes, Cardstock, HeavyWeight2, Bond, Lightweight, LightCardStock, LightCardStock2, LightGlossy, LightGlossy2, HeavyGlossy, HeavyGlossy2, Tabs, Letterhead, Custom1, Custom2, Custom3, Custom4, Custom5, Custom6, Custom7, Unspecified, Other, SystemDefault Front And Back Cover This command indicates the first and last pages of a job are covers. Do not use this command in conjunction with the CQ8700-8900 Customer Support Page 19 FIRST_PAGE_IMAGED. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRSTLAST_PAGE_IMAGED “string”; %%OID_ATT_FIRSTLAST_PAGE_IMAGED “string”; Where string is TRUE or FALSE Front And Back Cover Media Color This command indicates the first and last page of a job is to print on media of a specified color. Requires that OID_ATT_FIRSTLAST_PAGE_IMAGED is also used. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRSTLAST_PAGE_MEDIA_ COLOR “string”; %%OID_ATT_FIRSTLAST_PAGE_MEDIA_COLOR “string”; Where string is one of the following. Entries are case sensitive. White, Yellow, Green, Buff, Red, Ivory, Gray, Clear, Pink, Goldenrod, Orange, Unspecified, Blue, Other, Custom1, Custom2, Custom3, Custom4, Custom5, Custom6, Custom7 Front And Back Cover Media Size Overrides the document’s media size for the first and last sheet. Requires OID_ATT_FIRSTLAST_PAGE_IMAGED to be used also. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRSTLAST_PAGE_MEDIA_SIZE “ww hh”; %%OID_ATT_FIRSTLAST_PAGE_MEDIA_SIZE “ww hh”; Where ww hh is one of the metric sizes listed in the MEDIA SIZE table. Front And Back Cover Media Type Overrides the document’s media type for the first and last sheet. Requires OID_ATT_FIRSTLAST_PAGE_IMAGED to be used also. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_FIRSTLAST_PAGE_MEDIA_TYPE “string”; %%OID_ATT_FIRSTLAST_PAGE_MEDIA_TYPE “string”; Where string is one of the following. Entries are case sensitive. Standard, Transparency, Labels, Drilled, Recycled, Preprinted, Envelopes, Cardstock, HeavyWeight2, Bond, Lightweight, LightCardStock, LightCardStock2, LightGlossy, LightGlossy2, HeavyGlossy, HeavyGlossy2, Tabs, Letterhead, Custom1, Custom2, Custom3, Custom4, Custom5, Custom6, Custom7, Unspecified, Other, SystemDefault. Interleave This command identifies the type of page to insert between sets. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_INTERLEAVE OID_VAL_INTERLEAVE_string; %%OID_ATT_INTERLEAVE OID_VAL_INTERLEAVE_string; CQ8700-8900 Customer Support Page 20 Where string is one of the following: NONE BLANK IMAGED Interleave Media Color This command identifies the color of the interleaved pages. PJL COMMENT Command DSC Comment Command @PJL COMMENT OID_ATT_INTERLEAVE_COLOR “string”; %%OID_ATT_INTERLEAVE_COLOR “string”; Where string is one of the following. Entries are case sensitive. White, Blue, Yellow, Green, Pink, Clear, Ivory, Gray, Buff, Goldenrod, Red, Orange, Other, Custom1, Custom2, Custom3, Custom4, Custom5, Custom6, Custom7 CQ8700-8900 Customer Support Page 21 PJL/PCL Dependencies/Caveats • Locate all PJL commands in the beginning of the file before the image data starts (PS or PCL). • To combine printer escape commands (not including PJL commands): The first two characters after the MUST be the same. All alpha characters MUST be lowercase, except the final terminating character. The commands are read left to right. Combine them in the order you wish them executed. For example, print 5 copies ( &l5X) and use letter size ( &l2A) is combined as: &l5x2A • In case of duplicate commands, the last one requested takes precedence. • The PJL SET COPIES command takes precedence over the PCL command ( &l#X) to determine number of copies. In general, PJL commands takes precedence over PCL commands. • When printing a job with an odd number of pages and duplex front and back imaged covers, the printer always prints on both sides of the front and back covers. The remaining pages are printed on the document body media type and color with a blank page inserted to allow an image on both sides of the back cover. • When using the Blank Front or the Blank Front & Back Cover command, the Cover Media Size command is optional. If the cover size command is not in the PDL, the printer assumes the cover media size is the same as the document body. • Use one of the following methods to specify media selection: Describe the media attributes with size, color, and type to allow the device to select the matching source tray. If this media description method is used, leave the tray source command out of the job, or set to Auto. If not, the tray source command takes precedence over the tray selection capabilities of the device. Indicate the tray source for the job. If the tray source command is used, the system automatically defaults paper type to the defined SYSTEM DEFAULT unless specified otherwise. This prevents inadvertent use of special paper types. To override, include a paper type specification of UNSPECIFIED in the job. DSC/PS Dependencies/Caveats • All %% commands (DSC comments) must be in the first 64KB of the job. • WorkCentre and ColorQube devices support PostScript resolutions up to and including 1800 x 1800. Some PostScript jobs may not print if the high resolution is indicated. If this occurs, print the same job at a lower resolution. • The following media sizes do not print duplex and do not support staple commands: A6, B6, 5 x 7" Postcard (4.5 x 6"), envelopes and any custom sized media where the page width is less than 5.5". A request to duplex or staple these media sizes is ignored. • Jobs that indicate Transparencies, Labels, Envelopes or Tab-Stock do not support duplex commands. The duplex print request is ignored when any of these media types are used. • When printing an odd number of pages in a document with duplex front and back imaged covers, the printer always prints on both sides of the front and back covers. The remaining pages print on the document body media type and color with a blank page inserted to allow an image on both sides of the back cover. • When using the Blank Front or the Blank Front and Back Cover command, the Cover Media Size command is optional. If the Cover Media Size command is not in the PDL, the printer assumes the cover media size as that of the document body. • Use one of the following methods to specify media selection: Describe the media attributes with size, color, and type to allow the device to select the matching source tray. If this media description method is used, leave the tray source command out of the job, or set to Auto. If not, the tray source command takes precedence over the tray selection capabilities of the device. Indicate the tray source for the job. If the tray source command is used, the system automatically defaults paper type to the defined SYSTEM DEFAULT unless specified otherwise. This prevents inadvertent use of special paper types. To override, include a paper type specification of UNSPECIFIED in the job. CQ8700-8900 Customer Support Page 22 Examples Basic PCL/PJL Template This section illustrates a standard PCL template example that is used to access general print features. This example lists each feature and the syntax, both PCL commands and PJL, required to use these features. Note: This section is only an example that may include features and commands that do not exist for every product model. Note: This print job specifies the following items: • Job owner • Job name • 11 x 17 paper size • Heavyweight • Green paper • 1 staple • Draft mode Note: The quotations in the Job Name and Job Owner lines are required. Section 1 (Opening Command, Required for all files) %-12345X Section 2 (PJL Set Commands) @PJL SET RESOLUTION=600 @PJL SET COPIES=1 @PJL SET DENSITY=4 @PJL SET JOBOFFSET=ON Section 3 (XRXbegin – Opening Comment Statement, Required) @PJL COMMENT XRXbegin Section 4 (PJL Comments) @PJL COMMENT OID_ATT_JOB_NAME "Readme.txt"; @PJL COMMENT OID_ATT_START_SHEET OID_VAL_JOB_SHEET_NONE; @PJL COMMENT OID_ATT_JOB_OWNER "John Smith"; @PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_PRINT; @PJL COMMENT OID_ATT_DEFAULT_MEDIUM_TYPE "Cardstock"; @PJL COMMENT OID_ATT_DEFAULT_MEDIUM_COLOUR "Green"; @PJL COMMENT OID_ATT_PRINT_QUALITY OID_VAL_PRINT_QUALITY_DRAFT; @PJL COMMENT OID_ATT_FINISHING OID_VAL_FINISHING_STAPLE; @PJL COMMENT XRXSTAPLE=PORTRAIT; Section 5 (XRXend - Closing Statement for Comment Section, Required) @PJL COMMENT XRXend Section 6 (PCL Code used to invoke PCL Language) @PJL ENTER LANGUAGE=PCL Section 7 (PCL Data Stream or ASCII Document inserted here for Options such as Selecting Different Fonts, Simplex, Duplex, etc.) [Document or Text to print inserted here] Section 8 (Closing Command, Required at end of Document) %-12345X CQ8700-8900 Customer Support Page 23 Sample PJL Headers Note: This section is only an example that may include features and commands that do not exist for every product model. Example 1 Header for Simple Print Note: This is a simple print job header specifying the Job Owner and Job Name and one copy. The quotations in the Job Owner and Job Name lines are required. Note: This is a proof print job header that requests 6 copies. Note: This is a proof print job header requesting the staple option. You must send the job to the stacker using the native PCL command. CQ8700-8900 Customer Support %-12345X @PJL SET COPIES= 1 @PJL COMMENT XRXbegin @PJL COMMENT OID_ATT_JOB_OWNER “John Smith”; @PJL COMMENT OID_ATT_JOB_NAME “Print Job”; @PJL COMMENT XRXend @PJL ENTER LANGUAGE=PCL [Insert PCL document or text to be printed here] %-12345X Example 2 Header for Proof Print %-12345X @PJL SET COPIES= 6 @PJL COMMENT XRXbegin @PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_ PROOF_PRINT @PJL COMMENT XRXend @PJL ENTER LANGUAGE=PCL [Insert PCL document or text to print here] %-12345X Example 3 Header for Finishing Options %-12345X @PJL COMMENT XRXbegin @PJL COMMENT OID_ATT_JOB_OWNER “John Smith” @PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_PROOF_PRINT; @PJL COMMENT OID_ATT_FINISHING OID_VAL_FINISHING_STAPLE; @PJL COMMENT XRXSTAPLE=PORTRAIT; @PJL COMMENT XRXend @PJL ENTER LANGUAGE=PCL &l2G [Insert PCL document or text to print here] %-12345X Page 24 Basic PostScript/DSC Template This section is an example of a standard PostScript template that is used to access general print features. This template lists each feature and the syntax, both Postscript commands and DSC (Document Structuring Conventions) required. Note: This section is only an example that may include features and commands that do not exist for every product model. Note: The print job specifies the following items: • Job owner • Job name • 11 x 17 paper size • Drilled • Ivory paper • 1200 x 1200 resolution • Staple off • Landscape • Sample set • Draft mode • Offset off • Banner sheet off • Duplex long edge • One copy The quotations in the Job Name and Job Owner lines are required. Section 1 (Adobe Reference Command) %!PS Section 2 (XRXbegin - Opening Comment Statement, Required) %%XRXbegin Section 3 (OID Commands) %%OID_ATT_JOB_OWNER "John Smith"; %%OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_PRINT; %%OID_ATT_START_SHEET OID_VAL_JOB_SHEET_NONE; %%OID_ATT_JOB_NAME "Readme.txt"; %%OID_ATT_PRINT_QUALITY OID_VAL_PRINT_QUALITY_DRAFT; Section 4 (XRXend - Closing statement for Comment Section, Required) %%XRXend Section 5 (Options Such as Selecting Different Fonts, Simplex, Duplex, etc.) << /PostRenderingEnhance false >> setpagedevice << /Staple 0 >> setpagedevice << /Jog 0 >> setpagedevice << /ManualFeed false >> setpagedevice << /MediaType (Drilled) >> setpagedevice << /MediaColor (Ivory) >> setpagedevice << /DeviceRenderingInfo << /Type 4 /ValuesPerColorComponent 2 >> >> setpagedevice << /HWResolution [1200 1200] >> setpagedevice << /PageSize [792 1224] >> setpagedevice << /Duplex true /Tumble false >> setpagedevice << /Collate false >> setpagedevice Section 6 (Postscript Data Stream Inserted Here) [Postscript] Section 7 (EOF - Closing Statement for PostScript File, Required) %%EOF CQ8700-8900 Customer Support Page 25 Note: The header for simple print specifies the Job Owner, Job Name, and one copy. The quotations in the Job Owner and Job Name lines are required. Note: This is a proof print job header. This job requests 6 copies. Example 1 Header for Simple Print0 %!PS %%XRXbegin %%OID_ATT_JOB_OWNER “John Smith”; %%OID_ATT_JOB_NAME “Print Job”; %%OID_ATT_COPY_COUNT 1; %%XRXend Example 2 Header for Proof Print %!PS %%XRXbegin %%OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_PROOF_PRINT; %%OID_ATT_COPY_COUNT 6; %%XRXend Example 3 Header for Finishing Options Note: This job header specifies the following items: • 10 copies • Duplex • Collated • Stapled • Sent to the main tray • Job name • Bold image quality %!PS %%XRXbegin %%OID_ATT_JOB_OWNER “John Smith”; %%XRXend << /PageSize [612 792] >> setpagedevice << /OutputType (MainTray) >> setpagedevice << /Staple 3 >> setpagedevice << /Duplex true /Tumble false >> setpagedevice << /PostRenderingEnhance true >> setpagedevice << /Collate true >> setpagedevice << /NumCopies 10 >> setpagedevice Note: To use the staple and collate features, you must send the output to the stacker. Supported PostScript Fonts CQ8700-8900 Customer Support Page 26 AlbertusMT AlbertusMT-Italic AlbertusMT-Light AntiqueOlive-Bold AntiqueOlive-Compact AntiqueOlive-Italic AntiqueOlive-Roman Apple-Chancery Arial-BoldItalicMT Arial-BoldMT Arial-ItalicMT ArialMT AvantGarde-Book AvantGarde-BookOblique AvantGarde-Demi AvantGarde-DemiOblique Bodoni Bodoni-Bold Bodoni-BoldItalic Bodoni-Italic Bodoni-Poster Bodoni-PosterCompressed Bookman-Demi Bookman-DemiItalic Bookman-Light Bookman-LightItalic Carta Chicago Clarendon Clarendon-Bold Clarendon-Light CooperBlack CooperBlack-Italic Copperplate-ThirtyThreeBC Copperplate-ThirtyTwoBC Coronet-Regular Courier Courier-Bold Courier-BoldOblique Courier-Oblique Eurostile Eurostile-Bold Eurostile-BoldExtendedTwo Eurostile-ExtendedTwo Geneva GillSans GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSans-Condensed GillSans-ExtraBold GillSans-Italic GillSans-Light GillSans-LightItalic Goudy Goudy-Bold Goudy-BoldItalic Goudy-ExtraBold Goudy-Italic CQ8700-8900 Customer Support GreekMono737 GreekMono737-Bold GreekMono737-BoldItalic GreekMono737-Italic GreekMono851 GreekMono851-Bold GreekMono851-BoldItalic GreekMono851-Italic GreekMono8859-7 GreekMono8859-7Bold GreekMono8859-7BoldItalic GreekMono8859-7Italic GreekSans737 GreekSans737-Bold GreekSans737-BoldItalic GreekSans737-Italic GreekSans851 GreekSans851-Bold GreekSans851-BoldItalic GreekSans851-Italic GreekSans8859-7 GreekSans8859-7Bold GreekSans8859-7BoldItalic GreekSans8859-7Italic GreekSerif737 GreekSerif737-Bold GreekSerif737-BoldItalic GreekSerif737-Italic GreekSerif851 GreekSerif851-Bold GreekSerif851-BoldItalic GreekSerif851-Italic GreekSerif8859-7 GreekSerif8859-7Bold GreekSerif8859-7BoldItalic GreekSerif8859-7Italic Helvetica Helvetica-Bold Helvetica-Bold-ISOLatin9 Helvetica-BoldOblique Helvetica-Condensed Helvetica-Condensed-Bold Helvetica-Condensed-BoldObl Helvetica-Condensed-Oblique Helvetica-ISOLatin9 Helvetica-Narrow Helvetica-Narrow-Bold Helvetica-Narrow-BoldOblique Helvetica-Narrow-Oblique Helvetica-Oblique HoeflerText-Black HoeflerText-BlackItalic HoeflerText-Italic HoeflerText-Ornaments HoeflerText-Regular JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMT-Italic LetterGothic LetterGothic-Bold LetterGothic-BoldSlanted LetterGothic-Slanted LubalinGraph-Book LubalinGraph-BookOblique LubalinGraph-Demi LubalinGraph-DemiOblique Marigold Monaco MonaLisa-Recut NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbk-Italic NewCenturySchlbk-Roman NewYork Optima Optima-Bold Optima-BoldItalic Optima-Italic Oxford Palatino-Bold Palatino-BoldItalic Palatino-Italic Palatino-Roman StempelGaramond-Bold StempelGaramond-BoldItalic StempelGaramond-Italic StempelGaramond-Roman Symbol SymbolBoldFont SystemFont Tekton Times-Bold Times-BoldItalic Times-Italic Times-Roman TimesNewRomanPS-BoldItalicMT TimesNewRomanPS-BoldMT TimesNewRomanPS-ItalicMT TimesNewRomanPSMT Univers Univers-Bold Univers-BoldExt Univers-BoldExtObl Univers-BoldOblique Univers-Condensed Univers-CondensedBold Univers-CondensedBoldOblique Univers-CondensedOblique Univers-Extended Univers-ExtendedObl Univers-Light Univers-LightOblique Univers-Oblique Wingdings Wingdings-Regular ZapfChancery-MediumItalic ZapfDingbats Page 27 Supported PCL5 Fonts Albertus Extra Bold Albertus Medium Antique Olive Antique Olive Bold Antique Olive Italic Arial Arial Bold Arial Bold Italic Arial Italic CG Omega CG Omega Bold CG Omega Bold Italic CG Omega Italic CG Times CG Times Bold CG Times Bold Italic CG Times Italic Clarendon Condensed Coronet Courier Courier Bold Courier Bold Italic Courier Italic Courier PS Courier PS Bold Courier PS Bold Oblique Courier PS Oblique Dorit Dorit Bold Garamond Antiqua Garamond Halbfett Garamond Kursiv Garamond Kursiv Halbfett Helvetica Helvetica Bold Helvetica Bold Oblique Helvetica Narrow Helvetica Narrow Bold Helvetica Narrow Bold Oblique Helvetica Narrow Oblique Helvetica Oblique ITC Avant Garde Book ITC Avant Garde Book Oblique ITC Avant Garde Demi ITC Avant Garde Demi Oblique ITC Bookman Demi ITC Bookman Demi Italic ITC Bookman Light ITC Bookman Light Italic ITC Zapf Chancery Italic ITC Zapf Dingbats Koufi Koufi Bold Letter Gothic Letter Gothic Bold Letter Gothic Italic Line Printer Malka Malka Bold Malka Italic Marigold Naamit Naamit Bold Naskh Naskh Bold New Century Schoolbook Bold New Century Schoolbook Bold Ital New Century Schoolbook Italic New Century Schoolbook Roman Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Ryadh Ryadh Bold Symbol Symbol PS Times Bold Times Bold Italic Times Italic Times New Bold Times New Bold Italic Times New Italic Times New Roman Times Roman Univers Bold Univers Bold Condensed Univers Bold Condensed Italic Univers Bold Italic Univers Medium Univers Medium Condensed Univers Medium Condensed Italic Univers Medium Italic Wingdings Additional Information You can reach Xerox Customer Support at http://www.xerox.com or by calling Xerox Support in your country. Xerox Customer Support welcomes feedback on all documentation - send feedback via e-mail to: USA.DSSC.Doc.Feedback@xerox.com. Other Tips about Xerox multifunction devices are available at the following URL: http://www.office.xerox.com/support/dctips/dctips.html. © 2012 Xerox Corporation. All rights reserved. XEROX®, XEROX and Design®, and WorkCentre® are trademarks of Xerox Corporation in the United States and/or other countries. CQ8700-8900 Customer Support Page 28
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Xerox Corporation Company : Xerox Corporation Create Date : 2012:07:10 16:34:34-07:00 Modify Date : 2012:07:10 16:34:47-07:00 Source Modified : D:20120710232311 Subject : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2012:07:10 16:34:47-07:00 Creator Tool : Acrobat PDFMaker 9.1 for Word Document ID : uuid:8110e35f-03bf-4bd0-88f6-6319141b1b7a Instance ID : uuid:11127bd6-e011-4b55-be72-b3ad6df1049b Format : application/pdf Title : PDL Reference Guide for the Xerox WorkCentre 75xx Series - Customer Tip Description : Creator : Xerox Corporation Producer : Adobe PDF Library 9.0 Keywords : Page Layout : OneColumn Page Count : 28EXIF Metadata provided by EXIF.tools