Xiamen Huoshiquan Import and Export HOLYSTONEDF RC quadcopter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3613348
Application ID	l4X1UpxlP+0x9LJmuKMImA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	379.06kB (4738230 bits)
Date Submitted	2017-10-22 00:00:00
Date Available	2017-10-22 00:00:00
Creation Date	2017-07-17 13:58:30
Producing Software	3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod	2017-10-16 16:14:34
Document Title	F181C定高英语说明书更新 全转曲 2017.6.30
Document Creator	Adobe Illustrator CS6 (Windows)

ITEM NO.F181
F -I- ERIES
2.115”;
Indoor/Outdoor th Headless Mode
6 WWW. HOLVSTONE COM
1.Important Statement...
2.Drone & Transmitter Overview
3.Quadcopter Assembly
4.Charging Instruction for Drone Battery.
5.Basic Flight Controls.
6.M0de 1.
7.Mode 2.
8.Flips/Camera/Headless Mode Function ...................................
9.0ne Key Return
10.Take off/Landing ..........
11.Altitude Hold ..............
12.Calibration...
13.Spare Parts.
14.Troublcshooting Guide...
15.LiPo Battery Care Instructions
16.Additiorial Information
HIGHLIGHTS
Content
wmt—i
moodmwreoa
- 10
. 10
. 11
12
V usafflholystonecom
cadihulystonccom
© 1(626)46577134
6 www.holystone.com
Scan to Vlslt our stores
sirhsrnns us on You’l‘ubb
hiip liii ly 2iiii Jill
scan the QR code or search may store on raeebook to Like our page
(URL: facebookcom/l-lolySioneToy), you will be able lo:
. Take rundown our your next Holy srcne order.(i>M u. for the coupon)
. Be updated with the giveaway post and win the FREE DRUM; or parts.
’ Search on: www.hon.vton¢.com for more lnstruclion videos.
Important Statement
(i )Tbis product is nor a ioy but a piece oi'complicaied equipment which is integrated with professional
knowledge by mechanic. electronic. air mechanics, highrliequency :mhsllm elc ii \hould be installed
and adiuslcd correctly to avoid accideuis Thc us
no liability for human injury or propcriy damage eauscd by improper opcrauou, as we havc no control
must always opcralc in a salc maiincr Wc understakc
oycr sctiip, use and operation oi this drone.
(2)1his drone is suitable for experienced RC drone risers aged 14 years or above. .voi safe for risers under
the age of 14 to use.
(3) The flying field must be legally approved by your local government.
(4) lioiy sione has entrusted ihe distr ihutor io provide technical suppon and aficr-salc service
(5) ifyou have any questions about use. operation, repair ete , please contact lloly Stone at:
irsadtbolystcne com
Safety Precautions
improper assembly, broken main drone, defective electronic equipment, or unskilled operation may crime
unprcdreiablc accidcnis such as drone damagc or human Injuly Picasc pay special aiicnirou in thc
following surcty procedurcs‘
(1) Flying Area
The flying licld must be legally approvcd by your local govcmmcni. Do not ily ilic dronc neurthc
airpori. Kecp far away from the airport more man 3 it) miles when flying a RC dronc. Flying field
must be spacious enough and we suggest ai least 2o Z4fr(lcngrh)‘26.24n(wldrh)‘lé.40t\(hclghl)
(2) Keep away from humid environment
Ihc drone is made of precise electronic components llumidity or \varcr vapor may damage electronic
components causing accidents.
(3) Safe operation
Please operate the RC droiic in accordancc with your flying skills User fatiguc. lisilcssncss, and
improper operation may increase the rate or accidents
(4) Keep away/mm rotating parts
Rotating parts can came
(5) Keep away/rum heat
The RC dronc is made ol’mctal, fiber, plastic. clccironrc components cic. Keep away from heat and
direct sunshine io avoid disionion and damage.
(6) Please 110 not much the hut mutor m uvm'd being burnt.
Prc-Flight Note
To Make your experience with |his drone as \tralghtl'orwiild and convenient as possible, please read this
rious injury and damagc chp face and body away from roiaiiug moioi \
instruction manual carefully berorc operation Keep It safe ror liirihcr reference to ensure continued,
safe and cnyoyablc uxc of your dionc
Maintenance
(1)/wold prolonged exposure io drrcci sunlight and avoid licat buildup in me dronc.
(2) This dcvrcc is not waterproofand must nor be submerged in water undci any circumstances. 1‘ ailuie
ofihc unit will result from waier contamination.
(3) check the charging plug and other accessories for signs ofdamage frequently lfany part ofth device
is damaged, refrain fiom flying until maintenance can be carried out.
(4) Regarding any other maintenance issue, please coirtact the Customer Support Team at:
usa(lg;hulys|onc com
Propeller
Guard
nghtwelght
Frame
Counterclockwlse Motor
(Black and Whlte Wire)
propeller
Motor
Clockwlse Motor
(Red and 8er er9)
Please Note: letter A or B is primed on each propeller; Make sure all propellers are assembled
in the right orientation according to the image above.
Law/Meleigh/Expcri Mode(short press)
lights Un/Off(long press)
Throllle (up/down)
rake photo
Realetlme inlo display
somilip
Direction control (lorward/
backward/lcit/righi)
One Key Engine start/Landing
Video slartlslon
Headless/One Key4޴
Return
Leil/Righl trim
Powur indicator
Headlighiindicaior
Range signal
LowlMed/Hi hlExpell ode
Forward/Back trim
Power (iii/nil
Ballery Level
(For the transmitter)
Forward/backward
lndieaior(2 [50/75/1U0)
Photo/Video indicator
fine tuning indication
Leli/RIghl trim level
ng Up he C int ille
Remove the back battery cover from the controller and install 4 AA batteries
according to the diagram below, Use new batteries and do not mix new and old
batttlrics.
Battery cover
cum-t
4AAbalterles
1. Be prepared with a screw driver, the two landing gears, and the four propeller guards.
2. In rt the two landing gears into the bracket holes at the bottom of thc guadccptor. then
ice the four screw rightly.(pie.i)
3. Insert all the four propeller guards into the holes which locate an the motor houses, lock
the screws tightly.(pic.2)
(plcfl)
Screw position Screw position
Insert the use charger wire(included in the box) into the use pori(5V/o.5eiA).
The red indicator light will turn on. Then, connect the usu wire to the battery or the
charger plug at the bottom ofthe quadeopter(marked as "cum. The charger indicator
will turn off, indicating that thc quadcoptcr is charging. The indicator will turn on again
once the battery is fully charged. It takes around 100 minutes to fully charge thc battery,
lnscnthc USB charger
wire into the battery plug
i. Fly the quadccptcr in a spacious indoors area, or an outdoors area free oiobstaclcs,
rain, snow, animals, and people. When flying outdoors, please fly in a windiess environment.
2. Insert the battery into the quadcoptcr and connect it. The lights on the quadcoptcr
thta qundi optei A
lnsen the USE charger lnto
the charging plug which is at
the bottom oiihe quadoopter
To avah short clrculhplease plug In
the battery as the picture above.
will begin to flush Place the quadcoptcr on a level surface for takeoff.
3. Turn (in the remote control, then quickly shift the left stick up and down.
If done correctly, the transmitter sound will beep. and the LED indicators will turn
solid. thn flashing lights are becomc solidJl indicate ihis drum is ready to fly.
4.Press the one key stun button to stun the drone. Then push the throttle stick to fly it.
(Take Mode 2 for Example)
[JP/Down Move the loit stick rip/down during llic flight, llic
dmncwill end/descend.
Turning Move the left throttle stick left or right to rotate
the drone.
Fopwgpdr Move the right direction stick up or down to move
Backward forward or backward accordingly.
Left/Right Move the right direction stick to thc lcft or right
to fly lcft or right. accordingly.
Fine Tuning
Left/Right
thn the quadcoptor is hovering in a still
altitude, and ifit drifts to the left or riglilt. pr
the left/right trim button to the opposite direction
until the quadcoptcr is balanced.
Fine Tuning
When the quadcopter is hovering in a still
altitude, and if it drifts forward or backward,
Forward/ press the forward/backward trim button to the
Backward opposite direction until the drone is balanced.
Quickly press down the bullon on the upper ieri comer oI
tlic rrmttlt trial In S\ -h Ihl‘ spttnd modes: [.nvi(25’/I l.
SP9“ M°d°’ , Vlcdium(30%),Higll(73%),Expert(100%).
Lights OnIOff
long press down lhr button on rho irppir lctt rumor of the
remote control to turn tan/off the lights of the drone.
.4.
Remote ntr IOpe
Considering different pilots have different preferences over the controls,
we design two different modes to meet the preferences of different pilots.
I. Turn on the transmitter, Left hand throttle MODE 2 will be default setting.
(Recommendedl)
Left Stick fl \ Right Stick
(Throttle: Ascending/ ,i‘i‘ ‘\‘_‘\lj\ ‘ , (Direction: Forward/
Descending) l‘\\\\ \\¥/ Backward)
\\ ‘ '
l /
\ ./
( MODE 2 )
Left Stick Right Stick
(Tum chI/Turn Right) (Directio ' Lelileaning/
Rightlcaning)
(M0DE2)
2, Turning on the transmitter while holding the Uplcft button to enter
into MODEI . (Please do not release the uplcft button until the transmitter
is powered on)
Upleft button
chl Stick
(Direction: Forward/
Backward) ‘
Right Stick
(Throttle: Ascending/
Descending)
(MODE 1)
Lclt Slick Right Stick
(Direction: chtlcaning/
Rightleaning)
(MODEI)
While the quadcopter in flying, press the 31) button on the upper right oftbcconlrollcr.
Quickly move the right direction stick to whichever direction you want the quadcopter
to flip. You will lose some altitude during the flips, so make sure that you are flying
the quadeopter at least 3 M above the ground.
—A
1. insert a blank micro SD card into the card slot on the rear of rho camera underneath the
the guadcoptcr. Turn on and connect the controller to the quadcoptcr. lfthc SD card is
installed correctly, you will see a blue light on the camera.
2, Photo: Press the Takc Photo button on the remote control. The camcra light will flash in
red for once, it indicates that a photo is taken.
Video: Prcss thc Tako Video button on the remote control to start rccording. Thc camera
light will turn to be solid red, press the button again to stop recording, the red light
will turn off.
3. Remove the micro SD card from the quadcopter and insert it into a computer with the
included card reader The videos will appear in My Computer on Windows or on the desktop
on a Mac. Double c It a video to play.
TIPS:
1. If the micro SD card is installed incorrectly
or it's out of space, the camera light will
flash in red.
2. Do remember to press the Take Video button
again to stop recording the video.
3. Make sure that the media player supports
AVI videos.
LED light
tH llc shod
Headless Mode makes it easier to control the steering of the quadcopter. When
headless mode is off, the direction that the head of the quadcopter faces would he
forward direction. In headless mode. the direction the pilot faces would be
forward direction.
lode 8. Out:
1. Place the quadcopter on a flat, level surface, the head of the quadcopter facing forward
and the tail facing towards the pilot.
2. Quickly shift thc lcft stick up and down to bind thc rcmotc control to the quadeoptcr.
3. Press down the Headless Modc button, thc lights oitbe quadcopter will start flashing
and the quad sounds will beep constantlyThen. the quadcopter will fly to the pilot
directly. This is the One Key Return function.
4. Move the right stick to any direction to operate the quadcoptcr in headless mode and
the quadcopter will exit the One Key Return function,
5. Press down the Headless Mode button again to exit the Headless Mode.
Tips: (Important!) A
1. When pairing the remote to the quadcoptor, make sure the head ortho quadcoptor is
facing forward, and the tail of the quadcopter is facing rewards the fiver (and the
remote).
2. When iiying in headless mode/One Key Return. the flyer should not move around.
This is because the quadeopter will fly relative to the point where it is bound (to the
rcmotc), not relative to where thc remote is.
3. That said, we suggest pilots to stay stationary and face the same direction in which
he set thc head of thc quadcoptcr to face when binding the remote.
0m- Kay Krtum
dlvcmlon
Onc Kcy Return
dirretrnn One Key Retuui
direction
x Wrong
0 Right
Press dawn the One Key Engine Start/Landing button(pic.4),the blades begin to spin
automatically. Throttle up rho left stick slowly to take off. Press down the One Key
Engine Start! Landing button again to land, until the blades stop rotating.
(plc.5)
tud U1 Film
\0 i
./‘r 0' ,.\
. fin //
yea) so (i
\./
I,
Thc modcl is dcsigncd with altitudt‘rhold function so the quadcoptcr can maintain its
altitude after you release the throttle stick.
Ifthe drone Constantly drifts to one specific side, indicating that the Gyro is now confused,
please rm'alibriitc the Gym:
1.Place the quad on a flat and level surface.
2.Quickly shift the left stick up and down to bind the quadcopter to the remote as usual.
3. Hold down the 360” flips button on the upper right side of the remote control, it starts
beeping.
4. Hold both the left and right control sticks to the bottom left, until the LED lights of the
drone start flashing and then turn solid(pic.7)
5. The Gyro should now be reset.
rlips button
SEE .
5 CW Motors
1 Upper Cover 2 Lower Cover 3 CW Blades A Cow Blades
/~
.9
e usa Charger
6 ccw Motors
l0 Camera (black)
7 Battery a circuit Board
1| GearAssemhly i2 Propeller Guard 13 Landing Gear 14 LED Lighl i5 Screw Drlver
Problem
Reason
Solutinn
The lighls ori lhe quad are
llashinq and the quad
is not responding.
i lrisuineierit battery power
2 Controller 15 not connected to
the quad
a Unbalanced landing position
A Can‘t pairdue to the quad powered
oniora long time
i Recharging the battery
2 Turn on the quad and controller
Reconnect them by turning on again
3 Put it on the horizontal surlace
A Reopen the quad and pairagain
quickly
The propeller spin but the
quad can‘t fly.
i lrisuincieni battery power
2 Wrong sequence or propellers
a Damaged propellers
4 Something wrapped or gears broken
1 Recharging the battery
2 check the letters ‘A “E'on the propellers
3 Replace new propellers
A Make sure gears run normally
The quad can‘t iiy properly
after a crash
i Wrong sequency oi propellers
2 Damaged propellers
a The gyro is confused
4 Gears broken or blades hit the
propellerguard.
5.Wire or cuicuii board broken
bMoiois burnt out
1 checkthe propellerorder
2 Replace new propellers
3 Press trim buttons to nne tuning the
direction Reset the gyroscope
4 Make sure gears or blades rim
5 Replaoe motors or ouicuii board
6 Here IS a YouTube link or replacing
motors hiipsilybuiu belozivirNszo
One Key return button
doesn't work normally
lPlayer change directions alter
controller is connected to the quad
2.Tionsmiiier builon doesn't lunoiion
3.Weak power in battery
1 Must the correc| direction racing the
quad head at the beginning.
2 Change another transmitter
a ibiiy charge or use new battery
lt can'liake photo orvideo
l.1nsuliicieni battery power
2.50 card is lull in memory
3.The broken bullon oi transmltter
orbroken camera
A The Wire ol camera is disconnected
i ibiiy charge or use new battery
2 Change a new sd card DI phone card
3 Change a new lransmltter or camera
4 Check the plug of camera
lmage can‘t be dlsplayedorl
compuler
i Media player does not suppon
the hie iormar
2 video is not successiully recorded
i Try a new media player
2 Press video button again after taklng
videos
Please Note:
When one propeller does not spin while the others do, or this propellcr spins in different
speed rate, the motor of this propeller might be burnt up. The motors and circuit board
will heat up with use. Take a in minute cool down break between flights to ensure your
parts last as long as possible.
in case. that the quadcopter might descend on a further or insecure zone due to the
insufficent battery power when flying outdoor, the quadcoptcr is specially designed
with the function of secure warning, When rho barmry powcri
sufficcnt, the LEI)
light would turn from constant on to flashing. Then the pilot may have time to fly
back the quadcoptcr and changc thc battcry or recharge for the next flight.
.1 1.
LiPo Battery Care Instructions
Temperature
- Heat is a known factor. Ifa battery is pushed beyond 60°C during discharging or
charging, problems could occur due to metallic lithium generation, which damages
the cell.
o After a flight, you may find your batteries are warm to touch. Cool down the
battery a little bit before recharging.
Storage
o Please store batteries at normal room temperature and avoid direct exposure to
sunlight or heat. When storing LiPo battery for any length oftime, they should
ideally be stored at a temperature of between 5°C and 7°C.
0 Ifyou have a battery pack sitting on the shelf, fully charged, never try topping it
up till it has been partially or fully discharged!
Usage
c There should be a interval between charging and using battery.
. Please leave about 20% power remaining in the batteries
(instead of completely draining them down) as that would prolong
battery life and you can enjoy more cycles!
- Ifthe battery is pushed beyond its limits, the battery could get hot and the
performance will drop.
. When using the battery for a long time, the quantity ofheat of your battery will
increase. Ifit is sealed. the air inside will inflate rapidly causing heating.
Charging
0 DO NOT overcharge the battery. It may cause overheating and in turn this
overheating could damage the unit.
- Never try charging a pack that has been crashed or is damaged, you run the risk
of fire! Cells that are obviously swollen or have physical damage should never
be used and careful disposal 9 required, especially ifthe cells are swollen.
0 If the battery or the charger is defective, you should discard il immediately and
process a wananly from our supporl tcam(usa@holystonc,com). We can arrange
to ship you a replacement charger or bailcry.
I Altcr crashing the quadcoplcr, please check the bailcry conncclor and battery
properly.
' Please use genuine factory spare parls rcplaccmcnts from Holy Stone only.
LieI’o Battery Disposal dc Recycling
wasied Lllhlum-Polynicx banenes nrust nor be placed wrih
irouseiroidirasir Please contact local environmental or waste ‘3
agency or the supplier ofyoui model of your nearest Lilac
battery recycling center
.1 2.
Non-rechargeable batteries are not to be recharged;
Rechargeable batteries are only to be charged under adult supervision different types of
batteries or new and used batteries are not to be mixed;
Batteries arc to be inscncd with the correct polarity;
the supply terminals are not to he shon-circuited.
Regular examination of transformer or battery charger for any damage to their cord,plug,
enclosure and other parts ,and,they must not be used until the damage has been repaired
(instructions)
The packaging has to be kept since it contains important information.
The toy is only to be connected to Class II equipment bearing the symbol lil
FCC lnformation
This equipment has been tested and found to comply with the limits for a Class B digital
devide. pursuant to part 15 ofthe FCC Rules. These limits are designed to provide
reasonable protection against hramful interference in a residental installation. This
equipment generates uses and can radiate radio frequency energy and, ifnot installed and
used in accordance with [he instructions, may cause harmful interference to radio
communcialions. However, there is no guaranicc that intcrlcrcncc will not occur in a
particular installation. If this equipment docs causc harmful intcifcrcncc to radio or
.13.
television reception, which can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one or more ofthe following
measures:
. Rcoricni or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 ofthc FCC Rulcs. Operation is subject to the following
two conditions;
(i ) This device may not cause harmful interference.
(2) This device must accept any interference received. including interference that may
cause undesired operation.
WARNING: changes or modifications not expressly approved by the parly responsible for
compliance could void the user's authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
IC Notice:
This device complies with Canada Industry licence-exempt RSS slandard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference; and
(2) this dcvicc must acccpt any interference including intcrfcrcncc that may
cause undesired operation of the device.
.1 4.
CAN ICES-3 (B)
Avis d’lndustrie Canada
Le piésent appareil est conforme aux CNR d‘industrie Canada applicables aux appareils
radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes:
1) I'appai'cil ne doll pas produirc de brouillagc; et
2) I'ulillsalcur dc I'apparcil doll accoptcrbrouillagt: radioélcclriquc subi mcmt:
si 1c: brouillagc CSI susceptible d’cncomprumctuc 1c fonclionncmcnl. mauvais
fonetionncmcnt dc I'apparcil.
Cet appareil nume’riquie de la classe B est conforme 211a norme NMB-(103 du Canada.
CAN NMB-3 (B)
RF Exposure
Radiation Exposure Statement:
This equipment complies with 1C radiation exposure limits set fnnh for an uncontrolled
environment.
Declaration d'exposition aux radiations:
Cot équipcmcni est conformc aux limilcs d'cxposition aux rayonncmcnls IC établics pour u
cnvimnncmcnl non conlrélc.
Caution
1.Thc max operating ofthc EUT is 45°C. and shouldn’t be lower than 40°C.
2.Thc dcvicc complies with RF specifications when the device used at 0mm
form your body.
3.Declaration of Conformity .
.15.
We, Xiamen Huoshiquan Import & Export CO., LTD
hereby, declare that the essential requirements compliance with the Directive 2014/53/EU,
thc RoIIS Dircctivc 201 l/GS/EU and Safety Dircctivc 2009/48/EC havc hccn fully fulfilled
(in our producl wilh indication below:
Product Name: RhMO'l l‘. CONTROL MODEL/RADIO CONTROLLED
HELICOPTER
Model : F181
http://wwwholystone.com/Download/CE/FISICiEUiDOdef
This product can be used across EU member states.
MANUFACTURER INFORMATION
Manufactured by:
xiamen Huoshiquan Import & Export (10., LTD.
Room 703,No. 313-2 Xiahe Road, Siming District.
Xiamcn, China
+1 (ozo) 4654134
RoHS
(6
Made in China
®

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2017:07:17 13:58:30+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:10:16 16:14:34+08:00
Metadata Date                   : 2017:10:16 16:14:34+08:00
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Format                          : application/pdf
Title                           : F181C定高英语说明书更新 全转曲 2017.6.30
Document ID                     : uuid:e2354fad-1149-41d0-a91e-1dfdd96cfa05
Instance ID                     : uuid:8aeb8476-a3d4-467f-84b1-d7f8c692d6f9
Page Count                      : 1
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools