Xiamen Huoshiquan Import and Export HOLYSTONEMJ RC quadcopter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4035475
Application ID	CTBr4Zd2h8ycKkOn6umpMA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	470.81kB (5885107 bits)
Date Submitted	2018-10-15 00:00:00
Date Available	2018-10-15 00:00:00
Creation Date	2018-09-05 17:04:07
Producing Software	Adobe Photoshop for Windows -- Image Conversion Plug-in
Document Lastmod	2018-10-13 09:08:40
Document Title	Users Manual
Document Creator	PDF Presentation Adobe Photoshop CS6

o HoLY
Q STONE
Instructions For Use
VA11
16 t.
Ophelia (HS700)
«a» — usa@holystone.com (USA) eu@holystone.com (EU)
ca@holystone.com (CA) jp@holystone.com (JP)
(C) 1(855) se8—6699
www.holystone.com
Contents
1.0 Disclaimer& Warning
2.0 Safety Guidelines
3.0 Maintenance .....
4.0 Package Contents ...
5.0 Installation
5.1 Phone Holder .....
5.2 Camera ...
5.3 Landing Gear
5.4 Propellers
6.0 Drone‘s Details .
7.0 Transmitter Details ....
8.0 Charging ....
9.0 Operation Guide
9.1 Download APP .....
9.2 Transmitter‘s Battery
9.3 Drone‘s Battery ..
9.4 Paring ....
9.5 Initialization Detection ....
9.6 Calibrate the Gyro ......
9.7 Compass Calibration ...
9.8 Using the Application .....
9.9 Unlock ..
9.10 One Key Takeoff/Landing
9.11 Flight Control ..
10.0 Functions Details
10.1 Transmitter Calibration ...
10.2 Headless Mode ....
10.3 Return to Home
11.0 Specifications
12.0 Trouble Shooting
13.0 General Information ...
uxk
1.0 DISCLAIMER & WARNING
1. Please read this Disclaimer & Warning and Safety Guidelines carefully before
using our product. This product is not recommended for people under the age of
16. By using this product, you hereby agree to this disclaimer and signify that you
have read it fully. You agree that you are responsible for your own conduct and any
damaged caused while using this product, and its consequences . You agree to use
this product only for purposes that are proper and in accordance with local regula—
tions, terms and all applicable polices and quidelines Holy Stone may make
available
2. When using this product, please be sure to strictly abide by the specification
requirements and safety guidelines stated in this document. Any personal injury
propet
ty damage, legal disputes and all other adverse events caused by the
violation of the safety instructions or due to any other factor, WILL NOT be Holy
Stone‘s responsibilty.
2.0 SAFETY GUIDELINES
2.1 Check Before Use:
(D This product is not a toy, but it is a high precision drone that integrates various
electronic stability and control mechanisms. Please be sure to setup this drone
carefully and correctly to ensure s
accidentfree operation
(@ Please be sure that the batteries of the drone and transmitter are clean, undam—
aged
® Please be sure that all the propellers are undamaged and are installed in the
right orientation
(T uow
L/ srone
mm
@® Please do a thorough check of the product before each use. Check for firmness
of the parts, any signs of cracks and wear of the propeller, battery power and
effectiveness of the indicator, etc. If after doing a complete check any issues is
found, please refrain from using the product until the issue has been taken care for.
2.2 Flight Environment:
ik > 4; & 4 oye
Fly in Open Areas Maintain Line Fly Below
of Sight 393.6 feet (120 m}
LA
a‘s r (
W TT We *
Avoid fiying over or near obstacles, crowds, high voltage power lines, trees, airport
or bodies of water
DO NOT fly near strong electromagnetic sources such as power lines and base
stations as it may affect the onboard compass
Don‘t use this drone in adverse weather conditions such as rain, snow, fog, and
wind
Lo
mm
2.3 Operations Requirements :
® Please don‘t use this product to follow any moving vehicles
@ During the flight, only turn off the motor in case of an emergency.
® Please flight the drone back to you as soon as possible when the battery is
running low.
@ This product should not be used while drinking alcohol, if you are feeling
fatigued, taking medicine, or feeling any physical discomfort
(®) Beware of the noise volume the drone produces. Keep your distance to avoid
ear damage
i@®  (— ®
( Stay away from the rotating _ (®)Don‘t fly in the No—Fly Zone.
propellers and motors.
2.4 Use of Battery:
® Please ensure batteries are fitted in the correct orientation as shown in the
instruction manual.
@ Avoid short circuits by fitting the batteries incorrectly, and do not crush or
squeeze the batteries as this could carry the risk of an explosion
® Do not mix new and old batteries as this can lead to a poor performance of the
product
@® Dispose used batteries carefully, do not liter.
(®) Please keep dead batteries away from heat and fire
® If the device is not going to be used for an extended period of time, remove
batteries to prevent potential damage from battery leakage
—3—
G#»
mm
® If the device is not going to be used for an extended period of time, remove
batteries to prevent potential damage from battery leakage
® it is recommended to only use the USB charging cable that comes with the
drone to charge the battery.
® Don‘t connect the battery directly to wall outlets or car. cigarette ighter sockets
® Don‘t attempt to disassemble or modify the battery in any way.
) Don‘t use the battery if it gives off an odor, generates heat, becomes discolored
or deformed.or appears abnormal in any way. If the battery is in use or being
charged, remove it from the device or charger immediately and discontinue use
@ Don‘t pierce the battery casing with a nail or other sharp object, break it open
with a hammer, or step on it!
© Always charger the batteries in a fireproof container and away from combusti—
bie material. Don‘t charge on surfaces that can catch fire—this includes: wood, cloth,
carpet, or in the application‘s device.
@ Don‘t immerse the battery in water or allow it to get wet
) Don‘t solder battery terminal directly.
@ Keep battery out of reach of children or pets
@@ Don‘t short—circuit the battery by connecting wires or other metal object to the
positive(+] and negative(—) terminals
Li—Po Battery Disposal & Recycling ”
Waste Lithium—polymer batteries must not be placed with household trash ‘
Please contact local environmental or waste agency or the waste agency ’
BRRRRBRE : 0f thc Supplier of your model or your nearest LPPo battery recycling center.
Lo
3.0 MAINTENANCE
D Clean the product after each use with a clean, soft cloth
@ Avoid prolonged exposure to direct sunlight and avoid buildup of heat on the
drone
® This device is not waterproof and must not be submerged in water under any
circumstance. Failure to maintain the device completely dry will result in the failure
of the unit
® Check the charging plug and other accessories for signs of damage frequently.
If any part of the device is damaged, refrain from flying until maintenance can be
carried out
uo
4.0 PACKAGE CONTENTS
No. Part Name Picture Quantity
1 Drone 1
2 Transmitter 1
3 Camera And se 1
USB Data Cable .
4 Camera Holder 1
5 Phone Holder C 1
6 Drone Battery C 1
7 Propelers 8
8 Landing Gear 2
Charge
9 Transfer Box 1
10 Balance Charger K 1
11 USB Charging 2 \ L
Cables )/ 1
12 Screwdriver + > 1
13 Propeiler 20 1
Spanner
14 Camera Mat C P 1
Battery charging
15 Bag 1
16 Ainstated in meamera) 1
—6—
C "%
5.0 INSTALLATION
5.1 Phone Holder
D As shown on (Pic 1J, install the
phone holder to the transmitter,
@ Press the buckle on the phone
holder to take it out. [Pic 2)
Pic 2
5.2 Camera
D Attach the camera mat to the camera holder; [Pic 3)
© Connect the USB date cable to the camera; (Pic 4)
® Install the camera to camera holder, and lock it; [Pic 5)
@ Install the camera holder to the drone, and connect the USB date cable
to the drone and lock it. [Pic 6)
/ Pea
:#3
5.3 Landing Gear
D Make the "A" side of the landing gear
aim at the "A" hole on the drone; [Pic 7)
Pic 7
© Rotate the landing gear inward, then
push the "B" side of landing gear to the
"B" hole on the drone to complete instal—
lation. [Pic 8)
Pic 9
@® Press the buckle on the side of the landing gear, then can take it out. [Pic
9]
0000000000000
5.4 Propellers
® Installation: Install the propeller on the motor shaft according to the "A/
B" corresponding position, and rotate to tighten the propeller according to
the "Lock" icon on the propeller. [Pic 10)
@ Demolition Removal: Fix the brushless motor with propeller spanner
and rotating it according the "unlock" icon on the propeller to take it out
[Pic 11)
Pic 10 Pic 11
6.0 DRONE‘S DETAILS
_ _ &4 . 9
Propeiter B
Propeller A
‘Q =———— Propelier A
Propeller B ——— { ;
C ¥ar
i < /— Landing Gear
Camera Holder — LA B(
—
HD Camera
—g—
C "%
7.0 TRANSMITTER DETAILS
7.1 Transmitter Functions:
Unlock
Emergency Stop Return to Home
One key
Takeoi!) landing
—Is
f (T now
< + ) ‘ysr nc
\@ 7
Power switch
GPS mode swich Headless mode swich
n HBBB 9 2 Moget »sm>
ulll & 8 DBSB ce 2o
LCD scroen
One—key take off / landing: One button take off, one button landing
Unlock/Emergency Stop :
Return to Home: The Return to Home function brings the drone back to
corded Home Point
Photo / Video :
Cl 0 take photo, hold the but
enter the video
~10—
©#%
GPS mode switch:
Slide the button to " A", the drone exits the GPS Mode;
Slide the button to " B", the drone turns on the GPS Mode
Headless mode switch::
Slide the button to " A" to exits the Headless Mode;
Slide the button to " B" to enter Headiess Mode
7.2 LCD Screen Functions:
|I|" @2‘
((;\ 5PS Mode Video
: : Satelite Number Photo
h f Model ;
BUU Altitude (Meter) L
L1 r
2 |
H Distance[Met m«
LN vx uin L
evel
o Drone Battery L
—11—
C "%
7.3 Mode Switch:
7.3.1 MODE 2 [Left hand throttle MODE 2 will be default setting)
Left Joystick Right Joystick
uo Axera t fomrd
& 4 $
E4 Eo+ F4
+ t +
bown Descend Doun
mgne (A—AY A
» Tumict TomRign »Fry to m
WY Pi
7.3.2 MODE 1
® Hold down the and then turn on the power switch;
@© Press the “" button 3 seconds to enter MODE 1
Left Joystick Right Joystick
U mxam uo Asc’(v\d
4 —_—
Oe Descend
{XAX L x20x
Tumight Py totet ) . (—FytoRight
n 4 CV
—12—
8.0 Charging
77
“& — fl )
o @ ©
y ® L0%— USB Adapter
’ (SV/2.00)
h0 |
Power Bank
Batter Charge Balance use
Y _ transfer Box— Charger Charging Cable
D Connect the Battery, Charge Transfer Box, Balance Charger and USB
Charging Cable:
@ Connect the USB Charging Cable to Power Bank or a USB Adapter
{5V/2.0A Jfor charge.
A.
*« When the battery is charging, the green light will flash slowly and the red
light will be on
* When the battery is fully charged, the green light and red light will be on
* Before charging, please check the contents of the " Use of Battery"
section of the " Safety Guidelines"® carefully!
* Please insert the plug in the correct way. IF it is inserted in reverse, the red
light will be on, the green light flash quickly, the battery will not be able to
be charged
_—+ : © — + : ®
—13—
:#
9.0 OPERATION GUIDE
All of the following operations on this manual under MODE 2.
9.1 Download APP
Android APP on Google play
Connect to the App Store"" or Google"" Play and download the
" Ophelia GPS " application for free.
9.2 Transmitter‘s Battery
Installl batteries to
__________ P e
the transmitter
4 x 1.5V AA ° |
{Not included]
A Always pay close attention to battery polarity when installing the
batteries to make sure they are fitted correctly.
—14—
9.3 Drone‘s Battery
Installation:
ei
ry int
ery is firmly
Make sure that
the ba
talled
Battery Removal:
ress the buckle on the back of the battery while pulling backwards to
remove the battery.
#% 7
t you hear a click sound indicating
:#
9.4 Pairing
DHold the ((\E/ button and slide the
power switch to the right to power on the
transmitter.
@Install the battery and place the drone
on a level surface with the head forward
@® The " l "icon on the transmitter LCD screen is full, it means that the
drone has pairing with the transmitter successfully.
9.5 Initialization Detection
Place the drone on the level surface and enters the "Initialization Detection""
At this point, the yellow, green and red LED lights of the drone will flicker
alternately for about 7 seconds to complete the initial detection. At this time,
the front and back yellow LED lights of the drone will ficker alternately
—16—
es
9.6 Calibrate the Gyro
Push _ both of the joysticks down to the bottom left. the green LED light will
flash. Once the front and back yellow LED lights of the drone flicker
alternately, it means the calibration is completed
/0—0_0—0 «n _an «s <4ms
e ante. o * C )
C—O
9.7 Compass Calibration
D Hold the drone horizontally and rotate the drone for about 3 circles
And the @@@i@ip LED lights of the drone will keep blink,{Pic 1}
@ Hold the drone vertically and rotate the drone for about 3 circles
The front @@P lights and the rear (VellOW
light will turn to solid.[Pic 2)
—17—
G"%
9.8 Using the Application
Connect your smart phone to the Wi—Fi of the Drone and check the
drone‘s status on the "Ophelia GPS" App.
DOn your smartphone, launch a search of the available Wi—Fi networks:
© Select the Wi—Fi network HolyStoneFP\V_setetsick
@ Wait for your smartphone connect to the Wi—Fi network of the drone
This connection is generally represented by the Wi—Fi logo appearing on
your smartphone‘s screen
@ Enter the Ophelia GPS application
> The connection between your smartphone and the Drone is estab—
lished automatically.
{ Open the phone holder and put the phone.)
—18—
9.9 Unlock
9.9.1 Unlock the drone:
After the Compass calibration is completed, unlock the drone to
fly.
Method 1: Press the Uniock button (Pic 1}. The motors rotate and the
drone is unlocked
Method 2: Push the left stick to lower right comner and the right stick to the
lower left corner at the same time (Pic 2) to unlock the drone
\4/
Pic 1 Pic 2
& Tips:
After unlock the drone, the motor will automatically stop rotating if
you didn‘t fly the drone within 10 seconds.
9.9.2 Lock the drone:
After the drone lands on the ground, pull down the throttle stick to the
bottom position and keep for 3 seconds, the motor will stop immediately.
And the drone is locked.
Left Joystick
—19—
:#
9.10 One Key Takeoff/Landing
D After drone unlocked, press the One Key Takeoff/ Landing button, the
drone will automatically takeoff and hover at about 7~ 1 1 feet altitude
@ When the drone is flying, press the One Key Takeoff/ Landing button
again, the drone will automatically land on the ground
Take.off Landing
9.1 1 Flight Control
Control the flight by using joysticks
Left Joystick Right Joystick
Y t Y t
Down Descend Down Bacward
rerff CS mgn {AA} verf C 5p) mgne KA
Wlpoofe®"  mnice ) ( Rerign . Sife| )e rywieta) (anryiomign
1 x0 x 1 x0 x
20—
10.0 FUNCTIONS DETAILS
10.1 Transmitter Calibration
* Control sticks calibration has been completed by default. It is
not necessary to calibrate the control stick unless pilot has felt
abnormal stick travel.
+ Please do not power on your drone when calibrate the con—
trol stick for the remote controller.
® Hold down the " CE/ button while turn
on the transmitter; (Pic 1} o
© Press @ for 3 seconds, the transmitter send
out 3 beeps; (Pic 2) / %\\
\&/
@® Maximum rotate both of left and right joysticks
to any direction for 2 circles; [Pic 3)
@ Press" "for 3 seconds, the transmitter send s
out 3 beeps again, it means that Transmitter “
Calibration is completed. [Pic 4) \<=/
21—
Lo
mpppppoooooommmemmmcmum
10.2 Headliess Mode
® Slide the Headless Mode button to °B‘ to enter the Headless Mode.
@© Slide the Headless Mode button to "A" to exit the Headless Mode.
TAIL
£._>
E )\:/(
es\
HEAD
#~
Please make sure the pilot to stay in the same orientation
as the drone head faces when the drone tack off.
Under Headless Mode, the forward direction is the direction that the head of
drone faces when the drone take off
in order to make sure the pilot can tell drone‘s direction, we recommend that pilots
to stay in the same orientation as the drone head faces when the drone take off
If so, when the pilot pushes the direction joystick forward/ backward, the drone
will fly forward/ backward toward him/ her. If the pilot move the right stick left/
right, the drone will move left/ right relative to the pilot
22—
10.3 Rreturn to Home{RTH)
The Return to Home function brings the drone back to the last record—
ed Home Point.
The Home Point is the location at which the drone takes off. Or during
flight, the GPS receives more than 7 stars for the first time, the current
position of the drone will be recorded as the Home Point.
10.3.1 Smart RTH
Return to Home
If the GPS signal is available (more than 7 satelites is presented) and the
home point is recorded previously, press the "Return to Home" button on
the transmitter, the drone will fly back to the home point
Exit the RTH mode by pressing the "Return to Home" button or push the
Throttle Joystick
~23—
us
10.3.2 Low Voltage RTH
D When the drone‘s rear lights flash slowly, the " RX&—B" symbol is displayed
on the screen of the transmitter. At this moment, as long as the drone flying
altitude is over 98 feet or the flying distance is over 492 feet, the first Low
Voltage RTH will be triggered, and the drone will automatically return and
hover 98 feet above the Home Point. At the same time, the drone will exit the
Low Voltage RTH automatically.
At this time, the pilot can re—control the drone within a range of 98 feet high
and 328 feet.
@ When the drone‘s rear lights flash quickly, the * r«%_—}" symbal is displayed
on the screen of the transmitter. At this moment, the transmitter sounds "Di..,
Di..". At this moment, the second Low Voltage RTH will be triggered, as long
as the drone flying altitude is over 49 feet or the flying distance is over 49 feet,
the drone will automatically fly back to the Home Point
—24—
uzk
10.3.3 Failsafe RTH
If the GPS signal is available (At least 7 satellites} and the home point is
recorded previously. Failsafe Return will be triggered if the transmitter signal
is lost for more than 6 seconds. The drone will automatically start the return
procedure and it will fly back to the last recorded Home Point. You can exit
"Fallsafe RTH" mode by press the "Return to Home button or push the Left
Joystick if the transmitter signal is recovered.
During the Failsafe Return procedure, the drone can not avoid obsta—
cles.
The drone cannot Return—to—Home if the GPS signal is weak (satellites
number is less than 7).
If there is no GPS signal and transmitter signal lost for more than 6
seconds, the drone will not Return—to—Home but descend slowly until
land to the ground and lock the drone.
—25—
s
omm
11.0 SPECIFICATIONS
DRONE
Model: HS700
Weight 608 q
Flight Time: 20 minutes
Motor Model: 2204 1500KV
Operating Temperature Range: 32° to 104°F
Dimensions: 220 x 220 x 155mm
CAMERA
Video Recording Modes: HD1920® 1080p
Photo: JPEG
Video: AVI
MAX Supported TF Cards: 32 GB [Not included]
Operating Temperature Range: 32° to 104°F
TRANSMITTER
Operating Frequency: 24GHz
MAX Transmission Distance: 3280 feet
Operating Temperature Range: 32° to 104°F
Battery: 4x 1.S5V AA batteries
USB CHARGING CABLE
Voltage: 5 V
Rated Power: <10 W
26—
How
srONE
DRONE BATTERY
Capacity: 2800 mAh
Voltage: 7.4 V
Battery Type: Li—po
Energy: 20.72 Wh
Net Weight <149q
Charging power: 5~ 10W
Charging Temperature Range: 41 to 104°F [5® to 40°C)
Charging Time: 5~7 Hour
12.0 TROUBLE SHOOTING
No.
Problem
Solution
When the drone is powered on,
the indicator light keeps flashing
rapidly.
The drone is in the gyroscope
callbration state. Please place the
drone on an flat and level surface
The drone cannot hover after
Place the drone on a flat, level
2 takeoff and tits to one side surface and repeat the gyro calibra—
tion
Deformed propeller, replace the
3 The drone vibrated in flight
new propeller
The . drone . could. not. be The drone battery voltage is too
4 unlocked and the rear light
flashed
low. Please fully charge the battery.
97—
4
13.0 GENERAL INFORMATION
FCC Notice:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
{1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interfer—
ence that may cause undesirea operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm—
ful interference in a residentiel installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer—
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation, If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or reocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
—28—
WARNING: Changes or modifications not expressly approved by the
party responsible for compliance could void the user‘s authority to oper—
ate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
29—
4
HOW TO RECYCLE THIS PRODUCT
This symbol on the product or i‘s documentation indicates that it must not
be disposed of with household waste.
Uncontrolled waste disposal may harm the environment or human health.
Please separate your device from other types of waste to recycle it responsi—
bly.
This will help to foster the sustainable re—use of material resources.
We invite you to contact your retailer or inquire at your local town hallto
find out where and how the drone can be recycled. B:
80—
G8s
BATTERY WARNING:
1. Failure to follow all the instructions may result in serious injury, irreparable
damage to the battery and may cause a fire, smoke or explosion.
2. Always check the battery‘s condition before charging 0 using it.
3. Replace the battery if it has been dropped, or in case of odour, overheat—
ing, discolouration, deformation or leakage.
4. Never use anything other than the approval LiPo charger the battery.
Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is
recommended that you do not to use any other charger than  the one
provided with the product.
5.The battery temperature must never exceed 60°C {140°F) otherwise the
battery could be damaged or ignite.
6. Never charger on a flammable surface, near flammable products or
inside a vehicle (perferably place the battery in a non—flammable and
nonconductive container}.
7. Never leave the battery unattended during the charging process. Never
disassemble or modify the housing‘s wiring, or puncture the cells. Always
ensure that the charger output voltage corresponds to the voltage of the
battery. Do not short circuit the batteries.
8. Never expose the LiPo battery to moisture or direct sunlight, or store it in
a place where temperatures could exceed 60°C(car in the sun, for example)
9. Always keep it out of reach of children.
10. Improper battery use may result in a fire, explosion or other hazard.
11. Nonrechargeable batteries are not to be recharged. Rechargeable
batteries are only to be charged under adult supervision.
12. Different types of batteries or new and used batteries are not to be
mixed.
~31—
Gusk
omm
13. Batteries are to be inserted with the correct polarity.
14. The supply terminals are not to be short—circuited. Regular examination
of transformer or battery charger for any damage to their cord, plug, enclo—
sure and other parts and they must not be used until the damage has been
repaired
15.The packaging has to be kept since it contains important information
16.The toy is only to be connected to Class II equipment bearing the
symbol @
EU RF Power(EIRP): 10dBm (24 1 3MHz ~ 2461 MHz)
Caution
1.The max operating of the EUT is 45°C. and shouldn‘t be lower than
10°C
2.The device complies with RF specifications when the device used at
Omm
form your body.
3.Declaration of Conformity.
We, Xiamen Huoshiquan Import & Export CO,, LTD
hereby, declare that the essential requirements compliance with the
Directive 2014/53/EU, the RoHS Directive 20 1 1/65/EU and Safety
Directive 2009/48/EC have been fully fulfiled on our product with
indication below;
Product Name: REMOTE CONTROL MODEL/RADIO CONTROLLED
Model/Mark : HS700/HOLYSTONE
—32—
The Statement of compliance is available at the following address:
http;//mww.holystone.com,/docs/HS700EUDOC.pdf
This product can be used across EU member states
MANUFACTURER INFORMATION
Manufactured by
Xiamen Huoshiquan Import & Export CO, LTD
Room 703,N0. 813—2 Xiahe Road, Siming District, XIAMEN, China
+1(855) 888—6699
£0ec(¢=@®
Made in China
eanges or mediicatos not exreeny apprved y th part tesponsefoconphance coud va ne
users stnort to cooie t eavioment
Thi easrment has beetete an fond t comly wth t ds fr a Clie  igtl devn,purwant
10 Pat 18 ofi FCC Rues. These nis are designn t ic easorat rtecion aqunst hmd
ineirence in a resdental ntataton, Th eauimentgeneate, use and canradate rado becvency
enery and, 1 ntnstate and use n accurtance wih e instwclon, maycaune Narnd toderece
1o redo commenicaton However,hae is no pusanze tatintedarmce wl nc oceu in a pricuar
iestataton
1 vi easment does cause harm eneterence t rado or elevnion ecepton ic canbe
detemines ty uring t easiement t and on. ho user is encorages t y 1 corect e interurence
8y one or mom of e fotowng measies
« Rearentormecate ie recong antenns
——increase hn separiton betweon e eacimentand recuver
~ Conmec e eaciemant ts an outet on a creut iferentfom t towhen t receveriscomnacied
~ Connut hadenieroran arpedenced io TV tchncan to hap
Thi equipment comales wth CC radaton exposure Iimts se foth for an uncontaled
emironment This eqvipmentshoud be intaled and opeated wth minimum iatanc 20cm between
the radatorand your body.This vansniter mastnot b c—located o operting i conhncion wih
any ather antenna o taromitec
—33—

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:09:05 17:04:07+08:00
Creator                         : PDF Presentation Adobe Photoshop CS6
Modify Date                     : 2018:10:13 09:08:40+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:10:13 09:08:40+08:00
Creator Tool                    : PDF Presentation Adobe Photoshop CS6
Document ID                     : uuid:bdd50836-b28a-4f10-ab6c-d4e8bc5c9e5b
Instance ID                     : uuid:0eaf53cd-29f9-4723-91ec-b7e32ed54ffc
Format                          : application/pdf
Producer                        : Adobe Photoshop for Windows -- Image Conversion Plug-in
Page Count                      : 18

EXIF Metadata provided by EXIF.tools