Xiamen Huoshiquan Import and Export HOLYSTONES01 quadcopter wifi camera User Manual HS110 200 1

Xiamen Huoshiquan Import & Export CO., LTD quadcopter wifi camera HS110 200 1

User manual part 4

GENERAL INFORMATIONFCC RADIATION EXPOSURE STATEMENTThis equipment complies with FCC RF radiation exposure limits set for an uncontrolled environment . This transmitters must not be co-located or operating in conjunction with any other antenna or transmitter.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation.FCC InformationThis equipment has been tested and found to comply with the limits for a ClassB digital devide, pursuant to part 15 of the FCC rules. These limits are designed to provide residential protection against hramful interference in a residental installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communciations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase these paration between the equipment and receiver.Connect the equipment into an outlet on the circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.CAUTION!The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.The distance between user and products should be no less than 20cm.
BATTERYWAENING: Failure to follow all the instructions may result in serious injury, irreparable damage to the battery and may cause a fire, smoke or explosion.Always check the battery’s condition before charging or using it. Replace the battery if it has been dropped, or in case of odour, overheating, discolouration, deformation or leakage. Never use anything other than the approval LiPo charger the battery. Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is recommended that you do not to use any other charger than the one provided with the product. The battery temperature must never exceed60°C(140°F) otherwise the battery could be damaged or ignite. Never charger on a flammable surface, near flammable products or inside a vehicle (perferably place the battery in a non-flammable and non-conductive container). Never leave the battery unattended during the charging process. Never disassemble or modify the housing’s wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery. Do not short circuit the batteries. Never expose the LiPo battery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60°C(car in the sun, for example). Always keep it out of reach of children. Improper battery use may result in a fire, explosion or other hazard.HOW TO RECYCLE THIS PRODUCTThis symbol on the product or its documentation indicates that it must not be disposed of with household waste. Uncontrolled waste disposal may harm the environment or human health. Please separate your device from other types of waste to recycle it responsibly. This will help to foster the sustainable re-use of material resources. We invite you to contact your retailer or inquire at your local town hall to find out where and how the drone can be recycled.MANUFACTURER INFORMATIONManufactured by Xiamen Huoshiquan Import & Export CO., LTDRoom 703,No. 813-2 Xiahe Road, Siming District, XIAMEN, China
IC Notice: This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. RF Exposure Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Navigation menu