Xiamen Innov Information Technology IVF-BU01 Bluetooth UHF Reader User Manual Instructions

Xiamen Innov Information Technology Co., LTD Bluetooth UHF Reader Instructions

user manual

UserInstructions



IVF‐BU01seriesisaportabledongleUHFBluetoothreaderdevelopedbyXiamen

InnovInformationTechnologyCo.,Ltd,SupportISO18000‐6C/EPCGlobalGENII

protocol,whichcanbeconnectedtoIOSandAndroidviaBluetoothinterface,and

alsocanbeusedtoconnecttraditionalcomputerPCthroughUSBinterface.The

productiscompactandeasytocarry,alsocanbewidelyappliedtovariousRFID

applicationscenarios.

Instruction: 

1.Turnonthedeviceswitch:toggleswitchistoggledtothepositiononthehousing

withthedotmark.Atthispoint,thecentralpowerofthedeviceislitgreen.

2.Browsewww.xminnov.comdownloadtheBluetoothUHFAPP,searchUHF

Bluetoothreader,thedevicenameBDE_WEIXIN_TTM

3.Click“BDE_WEIXIN_TTM”toconnecttheUHFBluetoothreader,atthissametime

theleftsideBluetoothflashgreenlight.

4.Setting:Clickthe“Settings”buttonintheupperleftcorneroftheapptosetthe

frequencybandandpower.

5.Clickthe“<‐”buttonintheupperleftcorneroftheAPPtoreturnthemain

interface.Clickthe“StartCounting”buttonatthebottomrightofthemaininterface

tostartcountingtheUHFtags.

 

parameterspecification

1),ultra‐highfrequency(UHF) 865‐868Mhz(EU),902‐928MHz（US）

2),supportios,Androidplatform

3),thecommunicationinterface:bluetoothandmicrousb

4),readdistance:0.5m(dependingonthelabelsize)

5),workinghours:continuouswork4hours

6),material:ABS+PCengineeringplastic

7),batterycapacity:550mA

8),RFPowerlessthan30dbm

9),Wholedeviceconsumeslessthan2W



FCCStatement

§ 15.19 Labeling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

§ 15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

§ 15.21 Information to user.

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.



Note：

Hereby,XiamenInnovInformationTechnologyCo.,Ltddeclaresthattheradio

equipmenttype[designationoftypeofradioequipment]isincompliancewith

Directive2014/53/EU.

ThisdevicemaybeoperatedinallmemberstatesoftheEU.



Donotexposeyourdevicetoextremetemperatureslowerthan‐10°Candhigher

than+45°C.

Caution

Riskofexplosionifbatteryisreplacedbyanincorrecttype.Disposeofusedbatteries

accordingtotheinstructions.

Body-Support & Limb-worn Operation

This device was tested for typical body support & Limb-worn operations. To comply with RF

exposure requirements, a minimum separation distance of 0 cm can be maintained between

the user’s body and the device, including the antenna. Third-party belt-clips, holsters, and

similar accessories used by this device should not contain any metallic components.

Body-worn accessories that do not meet these requirements may not comply with RF

exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Xiamen Innov Information Technology IVF-BU01 Bluetooth UHF Reader User Manual Instructions

Xiamen Innov Information Technology Co., LTD Bluetooth UHF Reader Instructions

user manual

Navigation menu

Namespaces

Views

Navigation