Xiamen Reach AIOT Technology REACH-Q887R Smart phone User Manual Q887R eng QSG FCC 20140422

Download:
Mirror Download [FCC.gov]
Document ID	2247450
Application ID	//t9RU/egR72NgfvdON+eg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	120.41kB (1505133 bits)
Date Submitted	2014-04-21 00:00:00
Date Available	2014-04-22 00:00:00
Creation Date	2014-04-22 18:01:40
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2014-04-22 18:02:01
Document Title	Q887R eng QSG FCC 20140422
Document Creator	Adobe Illustrator CS6 (Windows)

FCC Statement
SAR Information Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population.
2. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard
for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the
phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna,
the lower the power output. Before a phone model is available
for sale to the public, it must be tested and certified to the FCC
that it does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on the body)
as required by the FCC for each model. The highest SAR value for
this model phone when tested for use at the ear is 0.252W/Kg
and when worn on the body, as described in this user guide, is
0.421W/Kg(Body-worn measurements dfiffer among phone models,
depending upon available accessories and FCC requirements).
The maximum scaled SAR in hotspot mode is 0.764W/Kg. While
there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement
for safe exposure. The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels evaluated as
in compliancewith the FCC RFexposure guidelines. SAR
information on this model phone is on file with the FCC and can
be found under the Display Grant section of
http://www.fcc.gov/ oet/fccid after searching on
FCC ID: Z5JREACH-Q887R Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Asso-ciation (CTIA) web-site at
http://www.wow-com.com. * In the United States and Canada,
the SAR limit for mobile phones used by the public is
1.6 watts/kg (W/kg) averaged over one gram of tissue. The
standard incorporates a sub-stantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
Body-worn Operation
IC STATEMENT
This device was tested for typical body-worn operations. To
comply with RF exposure requirements, a minimum separation
distance of 15mm must be maintained between the user’s body
and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that
do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
This device complies with Industry Canada licence-exempt RSS
standard(s)
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth
for an uncontrolled environment. End user must follow the specific
operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
These requirements set a SAR limit of xxxW/kg averaged over one
gram of tissue.
The highest SAR value for this model phone when tested for use
at the ear is 0.364W/Kg and when worn on the body is 0.421W/Kg.
The maximum scaled SAR in hotspot mode is 0.764W/Kg.This
device was tested for typical body-worn operations. To comply
with RF exposurerequirements, a minimum separation distance of
15mm must be maintained between the user’s body and the
handset, including the antenna. Third-party belt-clips, holsters,
and similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements
and should be avoided. Use only the supplied or an approved antenna.
Le présent appareil est conforme aux CNR d'Industrie Canada a
pplicables aux appareils radio exempts de licence.
Ce dispositif est conforme aux normes autoriser-exemptes du Canada
RSS d'industrie
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.Cet équipement est conforme avec
l'exposition aux radiations IC définies pour un environnement non
contrôlé. L'utilisateur final doit respecter les instructions de
fonctionnement spécifiques pour satisfaire la conformité aux
expositions RF. Cet émetteur ne doit pas être co-localisées ou
opérant en conjonction avec une autre antenne ou transmetteur.
Ces exigences définissent la valeur SAR limite à xxx W / kg en
moyenne par gramme de tissu.La valeur SAR la plus élevée pour ce
modèle de téléphone testé à l'orefille est 0 .364 W/Kg et lorsque
porté sur le corps est 0.421W/Kg.
l' échelle maximale sar en mode
hotspot est de 0.764W kg
Cet appareil a été testé pour des opérations portés sur le corps
typiques. Pour se conformer aux exigences d'exposition aux
radiofréquences, une distance minimale de 15 mm doit être
maintenue entre le corps de l'utilisateur et le combiné, y compris
l'antenne. Les pinces de ceinture, les étuis et autres accessoires
similaires utilisés par cet appareil ne doivent pas contenir de
composants métalliques. Les accessoires portatifs qui ne répondent
pas à ces exigences peuvent ne pas se conformer aux exigences
d'exposition RF et doit être évitée.
Utilisez uniquement l'antenne fournie ou une antenne approuvée

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00
Format                          : application/pdf
Title                           : Q887R eng QSG FCC 20140422
Metadata Date                   : 2014:04:22 18:02:01+08:00
Modify Date                     : 2014:04:22 18:02:01+08:00
Create Date                     : 2014:04:22 18:01:40+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 88
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 11911 bytes, use -b option to extract)
Instance ID                     : uuid:e5142b71-c91b-4d45-9985-ab8e8d25bf46
Document ID                     : xmp.did:0BE268B801CAE311BEEBA7E32B15D01F
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:aab0dfc6-2d35-4913-b4ea-737e9cec8a51
Derived From Document ID        : xmp.did:73473DDEE4C9E311892DCE89C6A1CD74
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:712AF31997C0E311B4F8851D32878004, xmp.iid:0BE268B801CAE311BEEBA7E32B15D01F
History When                    : 2014:04:10 18:01:35+08:00, 2014:04:22 17:37:28+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : F:\—\VI\.jpg
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 620.017280
Max Page Size H                 : 296.999959
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, AdobeSongStd-Light, NeoSans-Medium, NeoSans
Font Family                     : Arial, Adobe  Std, NeoSans Medium, NeoSans
Font Face                       : Regular, L, Medium
Font Type                       : Open Type, Open Type, Unknown, Unknown
Font Version                    : Version 3.00, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False
Font File Name                  : ARIAL.TTF, AdobeSongStd-Light.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 306 C
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants L       : 65.882401
Swatch Groups Colorants A       : -35
Swatch Groups Colorants B       : -38
Swatch Groups Group Name        : 
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Page Count                      : 1
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools