Xiaomi Communications RME7SG Mobile Phone User Manual
Xiaomi Communications Co., Ltd. Mobile Phone
User manual
Redmi Note 5
Dual 4G SIM requires the support of local telecom operator
services, and may not be available in all regions.
Only certain regions and telecom operators support VoLTE.
System updates may be applied when network optimization
occurs. For details, please refer to the system version in use
on the device.
About Dual SIM:
SIM Card Tray：
MIUI
Redmi Note 5 is pre-loaded with MIUI, our customised
Android-based OS which pushes out frequent updates and
user friendly features suggested by over 200 million active
users globally. Visit www.miui.com for more information.
Thank you for choosing Redmi Note 5
Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
Visit our official website: www.mi.com
For more information
Tray 1 supports Nano-SIM card;
Tray 2 supports Nano-SIM card / Micro SD card.
Obop.TJN
Usbz!2
Obop.TJN
Usbz!3
Obop.TJN Njdsp!TE
填写料号，并生成条码，条码为料号加版本，扫描后为数字后紧跟版本，不需要分割线
紫兴128g高白无光铜，正背哑油
内页
216x156mm
单页72x156mm
Pantone Cool Gray 8C
Pantone Cool 1505C
Saturday, August 16 Volume
Buttons
Power
Button
USB Port
This mobile phone offers the following frequency bands in EU areas only
and maximum radio-frequency power：
Frequency Bands and Power
This mobile phone complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including anterference that may cause undesired operation.
This mobile phone has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiated radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
FCC Regulations
GSM 900：35 dBm
GSM 1800：32 dBm
UMTS band 1/8：25 dBm
LTE band 1/3/7/8/20/38/40：25.7 dBm
Bluetooth：20 dBm
Wi-Fi 2.4 GHz band ：20 dBm
Wi-Fi 5 GHz band ：20 dBm
AT
EE
IT
PT
BE
FI
LV
RO
BG
FR
LT
SK
HR
DE
LU
SI
CY
EL
MT
ES
CZ
HU
NL
SE
DK
IE
PL
UK
Manufacturer :
The Rainbow City of China Resources, NO.68, Qinghe Middle
Street, Haidian District, Beijing, China 100085
Legal Information
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in 5150
to 5350Mhz frequency range in following countries :
Ensure the power adapter used meets the requirements of Clause 2.5
in IEC60950-1/EN60950-1 and has been tested and approved
according to national or local standards.
Xiaomi Communications Co., Ltd.
Brand：MI Model: M1803E7SG
All rights reserved by Xiaomi Inc. 000000000000-A
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy. The
exposure standard for wireless device employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this
device has been tested and meets the FCC RF exposure guidelines for
use with an accessory that contains no metal and be positioned a
minimum of 1.0 cm from the body. Use of other accessories may not
ensure compliance with FCC RF exposure guidelines. If you do not use
a body-worn accessory and are not holding the device at the ear,
position the handset a minimum of 1.0 cm from your body when the
device is switched on.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
RF Exposure Information (SAR)
FCC Note
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Important Safety Information
Temperature: 0 °C - 40 °C
Install the adapter near the device in an easily accessible position.
This device has an electronic label for certification information.
To access it , please select Settings> About Phone >Verification
or select Setting, then type "Verification " into the search bar.
E-label
SAR 10g limit: 2.0W/Kg, SAR Value: Head: 1.29 W/Kg,
Body: 1.24 W/Kg (5mm distance).
SAR 1g limit: 1.6W/Kg, SAR Value: Head: 1.03 W/Kg,
Body-worn: 0.79 W/Kg (10mm distance).
Hotspot: 0.79 W/Kg (10mm distance).
Model: M1803E7SG
1803 indicate the date of putting the product on the market is 201803
Follow relevant laws and regulations. Do not use your phone in the
following environments.
Do not use your phone in a potentially explosive environments include
fuelling areas, below decks on boats, fuel or chemical transfer or
storage facilities, areas where the air contains chemicals or particles,
such as grain, dust, or metal powders. Obey all posted signs to turn off
wireless devices such as your phone or other radio equipment.
Do not use your phone in the hospital operating rooms, emergency
rooms, or intensive care units.Please consult your doctor and the
device manufacturer to determine if operation of your phone may
interfere with the operation of your medical device.To avoid potential
interference with the pacemaker.keep a minimum separation of 15 cm
be maintained between the mobile phone and the pacemaker . To
achieve this use the phone on the opposite ear to your pacemaker
and do not carry it in a breast pocket.Do not use your phone near
hearing aids, cochlear implants, etc to avoid interference with
medical equipment.
Respect aircraft safety regulations and turn off your phone on board
the aircraft when required.
When driving a vehicle, use your phone in accordance with the
relevant traffic laws and regulations.
To avoid lightning strike, do not use your phone outdoors during
thunderstorms.
Do not use your phone to make calls while it is charging.
Do not use your phones in places with high humidity such as
bathrooms. Doing so may result in electric shock, injury, fire, and
charger damage.
Observe any rules which restrict using mobile phones in specific
cases and environments.
RED Declaration of Conformity
We, Xiaomi Communications Co., Ltd.
Body-worn SAR testing has been carried out at a separation
distance of 5 mm . To meet RF exposure guidelines during
body-worn operation, the device should be positioned at least
this distance away from the body.
If you are not using an approved accessory ensure that whatever
products used is free of any metal and that it positions the phone
with the indicated distance away from the body.
Receiver Category 2
Hereby, Xiaomi Communications Co., Ltd. declares that this GSM/GPRS/
EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1803E7SG
is in compliance with the essential requirements and other relevant
provisions of the RE Directive 2014/53/EU.The full text of the EU declaration
of conformity could be consulted at www.mi.com/en/certification
EU Regulations
Update your phone’s operating system using the built-in software
update feature, or visit our authorized service outlets. Updating
software through other means may damage the device or result in data
loss, security issues, and other risks.
Security notice
Safety precautions
Correctly dispose of this product. This marking indicates that
this product should not be disposed with other household
wastes throughout the EU.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle responsibly to promote
the sustainable reuse of material resources.
To safely recycle your device, please use return and collection systems
or contact the retailer where the device was originally purchased.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
CAUTION
To prevent possible hearing damage,
do not listen at high volume levels for long periods.
For Environment Declaration, pls. refer to below link:
http://www.mi.com/en/about/environment/
Important safety information
Read all the safety information below before using your device.
Using unauthorized cables, power adapters, or batteries can cause fire,
explosion, or pose other risks.
Use only authorized accessories which are compatible with your device.
This device’s operating temperature range is 0℃~40℃. Using this device
in the environments outside of this temperature range may
damage the device.
If your device is provided with a built-in battery, don’t attempt to replace
the battery yourself to avoid damaging the battery or the device.
Charge this device only with the included or authorized cable and power
adapter. Using other adapters may cause fire, electric shock, and
damage the device and the adapter.
After charging is complete, disconnect the adapter from both the device
and the power outlet. Do not charge the device longer than 12 hours.
The battery must be recycled or disposed of separately from household
waste. Mishandling the battery may cause fire or explosion. Dispose or
recycle the device, its battery and accessories
according to the local regulations.
Do not disassemble, hit, crush, or burn the battery. In case of
deformation, stop using the battery immediately.
- Do not short circuit the battery to avoid overheating, burns, or other
personal injuries.
- Do not place the battery in the high-temperature environments.
Overheating may cause explosion.
- Do not disassemble, hit, or crush the battery to avoid battery leaks,
overheating, or explosion.
- Do not burn the battery to avoid fire or explosion.
- In case of deformation, stop using the battery immediately.
Keep your device dry.
Do not try to repair the device yourself. If any part of the device does not
work properly, contact Mi customer support or bring your device to an
authorized repair center.
Connect other devices according to their instruction manuals. Do not
connect incompatible devices to this device.
For AC/DC Adapter, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
For more important safety information, pls. refer to User Manual in below
link:http://www.mi.com/en/certification/