Xiaomi Communications RMSG6S Mobile Phone User Manual

Xiaomi Communications Co., Ltd. Mobile Phone

User manual

222x151mm单页 74x151mmSaturday, August 16 VolumeButtonsPower ButtonMenuButtonBackButtonUSB PortHome Button填写料号，并生成条码，条码为料号加版本，扫描后为数字后紧跟版本，不需要分割线When 2 SIM cards are in use, one SIM will offer 4G/3G/2G while the other will offer only 3G/2G.About Dual SIM:SIM Card Tray：MIUIRedmi Note 5A Prime is pre-loaded with MIUI, our customised Android-based OS. MIUI is frequently updated and user friendly features are added based on the suggestions of over 200 million global active users. Visit www.miui.com for more information. Thank you for choosing Redmi Note 5A PrimeLong press the power button to turn on the device. Follow the on-screen instructions to configure the device.Visit our official website: www.mi.comFor more informationTray 1 supports Nano-SIM card；Tray 2 supports Nano-SIM card；Tray 3 supports micro SD card.Obop.TJNObop.TJNNjdsp!TE Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.CAUTION To prevent possible hearing damage, do not listen at high volume levels for long periods.RED Declaration of ConformityWe, Xiaomi Communications Co., Ltd.Body-worn SAR testing has been carried out at a separation distance of 5 mm (MDG6S). To meet RF exposure guidelines during body-worn operation, the device should be positioned at least this distance away from the body. If you are not using an approved accessory ensure that whatever products used is free of any metal and that it positions the phone with the indicated distance away from the body.Receiver Category 2Hereby, Xiaomi Communication Co., Ltd declares that this GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi MDG6S is in compliance with the essential requirements and other relevant provision of the RE Directive 2014/53/EU.The declaration of conformity could be consulted at www.mi.com/en/certification Xiaomi Communications Co., Ltd.Model: MDG6S All rights reserved by Xiaomi Inc.000000000000-AThis device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR.The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.0 cm from your body when the device is switched on.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.RF Exposure Information (SAR)FCC Note:E-label:This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power：Frequency Bands and PowerThis mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including anterference that may cause undesired operation.This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: FCC Regulations-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.GSM 900: 35dBmGSM 1800:32dBmUMTS band:1/8:25dBmLTE band 1/3/7/8/20/38/40:25.7dBmBluetooth:<20dBmWiFi 2.4GHz band < 20 dBmThis device may be operated in all member states of the EU.Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.Ensure the power adapter used meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards.Manufacturer :The Rainbow City of China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China 100085Legal InformationImportant Safety InformationTemperature: 0℃—40℃Install the adapter near the device in an easily accessible position.Model: MDG6SSAR: 10g limit: 2.0W/kg. SAR Value:Head: 0.504W/kg.Body: 1.683W/Kg (MIN. 5mm distance).SAR:1g limit: 1.6W/kg. SAR Value:Head: 1.059W/kg.Body-worn: 1.159W/kg(MIN. 10mm distance).Hotspot: 1.167W/kg(MIN. 10mm distance)This device has an electronic label for certification information, to access it , please select Settings>About phone>Verification Redmi Note 5A PrimeEU Regulations

Navigation menu