Xiaomi Rice Cooker En

rice_cooker-en User manuals for Xiaomi Mi devices | XIAOMI-MI.com

User Manual: Xiaomi User manuals for Xiaomi Mi devices | Xiaomi-Mi.com

Open the PDF directly: View PDF .
Page Count: 10

Download
Open PDF In Browser	View PDF

MiJia Heating Pressure Rice Cooker

M
O

Before using the device, read the instructions carefully

Content

YLIH01CM_V2.0
Please read the instructions carefully to ensure correct and safe use of this device.
This product is only intended for home use.
Pay special attention to the section «Precautions» (p. 8-9)

C
.I
Before use

1. Introduction to the product					
02
2. Fast using 							03
3. The client application App 					03
4. Regulation of the time in standby mode 			
04

M
I

M
O
A
I
X

Power
cable

Measuring cup Spoon (flat)

Usage

5. Operation Manual 						04
Cooking, quick cooking 						05
Rice porridge, heat preservation 				
05
Personal settings, the choice of the program 			
05
6. Cleaning the rice cooker
The assembly, disassembly 					06

FAQ

7. Troubleshooting 						05
8. Fault codes 							07
9. Precautions 							07
10. Basic settings 						08
11. Name of Product 						08
12. The presence of toxic and hazardous substances 		
08
13. Schematic diagram 						09
14. Warranty 							09

Ложка ( soup)

1

Introduction to the product

The back side of
inner cover

Removable inner lid

Protective
surface

M
I
Attention! Heat! Before
installing the inner lid, set
the steam release valve

Temperature
sensor

M
O
A
I
X

Steam release
valve

M
O

C
.I

Inner lid latch

Reflux valve

The front side of
inner cover

Safety valve

Water level
indicator

Attention! Heat! After use,
remove to wash.

Button to
open the lid

Control Panel
1. LED digital display time
2. Time control buttons (hours / minutes)
3. Select of program
4. Menu
5. Select / Cancel
6. Digital timer
7. Start Button

2

Pressure
controller

Quick using

M
O

Application

Even more Smart devices can be found in a mobile application Mi
«Smart Home»
1.
Power Connection
Plug one end into the rice cooker, and the second - to a power
supply.

Wi-Fi connection
2.
Connecting Rice cooker to the power supply for the first time will
automatically open connection to network. Connect the new device in
the application «Mi Smart Home».

M
O
A
I
X
Hole to reset Wi-Fi

Indicator

Waiting for connection
Yellow blinks

Connecting to a network
Blue blinks

C
.I

M
I

Note: Use a thin object to press and hold for 5 seconds the reset
button Wi-Fi, and then re-open standby connection to the network.

Wi-Fi indicator

Installing the client application
To install the client application on your smartphone, open Mi Store
and search for «Mi Smart Home» App or scan the QR-Code.

This device is already in the list of devices in the «Mi Smart Home»,
supporting MIUI system, and can interface with other intelligent
devices of your home.
By connecting a smartphone to the Wi-Fi network, open the
downloaded client application and follow the instructions shown on
the phone display.

Connecting succesfully
Blue lit

3

Regulation of time in
standby mode

Click on «Select / Cancel» to select a desired mode. Each time you press the button,
mode will be switched in turn: «Cooking / Quick cooking / Rice porridge / Heat
preservation / Personal settings»

Press and hold program selecting button for 5 seconds to enter the
time control mode.
Warning: when you connect to the Internet, the time will be
automatically tuned.

C
.I

1. Press and hold for 5 seconds

Set/Cancel

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

Start

M
O

Switching menu

Set/Cancel

1.
Cooking
Turn on «Cooking» mode. The program will automatically configure the cooking duration
depends on the amount of rice (the default time of cooking - 1 hour).

M
I

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

M
O
A
I
X

Program select

Set/Cancel

Start

2.
Quick cooking
Automatic detection of the cooking time depending on the amount of rice (default cooking time 40 minutes).

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

3.
Rice porridge
Time default cooking - 1.30. Adjust porridge cooking time.

2. To adjust the time, use the «Hour» and «Minute» buttons, and
then click on the «Start» button to confirm your selection.

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

Set the desired cooking time by pressing the «Hour» and «Minute» buttons. Control range from 40 minutes to 4 hours.

4

Switching menu
4.
Heat preservation
At the end of cooking, the rice cooker automatically switches to the keep warm mode.
Maintain temperature is about 73 C.
You can manually select the mode of keeping warm.
Warning: not recommended to leave heat preservation mode switched on for more
than 12 hours. If this mode is activated for more than 24 hours, the rice cooker
automatically switches to standby mode (heat preservation mode is turned off).

C
.I

M
I

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

5.
Personal settings
The app recommends a creation of a plurality of modes of different delicious dishes.
Use the App to run your own settings for the preparation of meals.

M
O
A
I
X

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

M
O

Trouble-shooting

6.
Program select
1. After selecting the desired mode (eg «Cooking»), click on the «Select program» to
make the settings.

Note: When selecting a program, make sure to set the correct current time on the rice
cooker.

2. Set the cooking time by pressing the buttons «Hour» and «Minute», and then click
on the «Start» button to start cooking.
Note: Set the time in 24 hour format.

5

Cleaning of the Rice cooker
1.
Disassembling
1. Turn left to remove a protective cover

2. After a light pressing on a latch
inside of cover, it automatically
pops up. Remove the inner cover.

3. Under inner cover, you will see
the steam release valve, which
must be removed.

Note: After each use it is necessary to
wash the inner cover and steam release
valve.

1. Hold the gasket in its groove,
align it, and then lightly press
down on the latch until you hear
a «click».

C
.I

M
I

M
O
A
I
X

2.
Assembling
Install the gasket, align, close up.

M
O

Open a latch, pull the gasket.
Open a steam release valve, pull the
latch to the side, open the valve, and
then remove the seal.

3. Insert a support ring of the inner lid in a special
slot in the rice cooker, slightly press down an inner
cover up until you hear a «click».

2. Accurately move the pair of release
valve on the steam outlet hole, and then
lightly pressing down, slowly insert it into
the installation location.

4. Insert a protective surface
along the fixing plate on a right
side.

Note: Steam release valve and
the inner cover must be set
differently or Rice cooker cover
will not close properly.

6

To clean the rice cooker with a soft cloth.

Fault codes

M
O

Power cable:

LED Indication error: White LED indicates an error, the other indicators are off

Use only the power cord that was originally supplied with the rice cooker.
Before performing any action on the maintenance of the device or moving, unplug the power
cord from the wall outlet.
If the power cable is damaged, replace it with the same original power cable.
Do not twist, bend or peredavlivayte power cord. Otherwise, the current-carrying cable
conductors are stripped or broken.
Do not use the rice cooker power cord for any other devices.

C
.I

Safety in the operation of a power supply:

The excess of 220V AC, the use of the device is prohibited to prevent a fire.
It is strongly recommended to disconnect a power cord from the wall outlet to avoid electrical
shock, short-circuit and ignite. To disconnect a power cord, do not use a lot of force.
Do not allow yourself to use the device to adolescents, set rice cooker out of reach of small
children to avoid electric shock, scalding and occurrence of other accidents.
Do not insert or unplug a power cord with wet hands to avoid electric shock or other risks.
Do not use any foreign power cables.
Do not connect a power cord to the rice cookers block outlet to avoid a fire hazard.

M
O
A
I
X

M
I

Precautions

Limitations of use:

For the normal functioning of the product height above sea level should be between
0 m - 2000 m.
Please do not install this product near the other sensitive to electromagnetic
interference devices.
Please do not use foreign domestic cup or bowl with deformations, in order to avoid
overheating, so that you can get injured or burned.
Care and Cleaning:
Do not immerse the product in water and do not spray the water to it.
Do not use hard sponge or other hard objects to wash rice cookers or bowl.

Environment:

Due to the presence of steam and hot air emanating from the rice cooker, your walls and
furniture can get damaged, change color or become deformed. To avoid such situations,
while using the device set the rice cooker at a distance of 30 cm from walls and furniture.
In the case of installation rice cookers in the kitchen cupboard, or in other places, make sure
there is ventilation when using the device.
Using:

While cooking is strictly forbidden to open the lid. After the rice cooker automatically finish
cooking or pauses in the middle of the cooking process, wait for the full release of pressure,
only open the device.
Do not install the inner bowl to other sources of heat to heat it up (eg, induction cooker, gas
stove).
Do not insert any objects into the outlet or into other slots.
In the process of using of the rice cooker or immediately after cooking, be careful, don`t be
close to the hot steam. Especially watch out for children at the moment, to avoid burns.
In no case do not cook in the rice cooker products that can clog the exhaust port (eg, dried
seaweed, seaweed and other leaf products).
It is strictly forbidden to put any objects on the rice cooker in the cooking process, as this may

7

Main specifications

lead to the blocking of the release of steam.
If the save temperature of any food longer than the time that is characteristic for normal
cooking, you may see the peculiar smell of rice.
Completion of cooking:
After cooking, do not forget to turn off the rice cooker and disconnect it from the power
supply.
Regularly check the steam release channel pair to make sure they are not clogged.
When a problem occurs, immediately discontinue use of the device, disconnect it from the
power supply. Wait for rice cooker cooling, and then open the lid and remove the bowl.

C
.I

Other special instructions:
Please, do not let fall or stress of the device to avoid breakage or any damage.
Do not use the rice cooker bowl, if it is damaged, to avoid burns or injury to hot steam,
which can be released no control over other openings.
Do not remodel the unit. It is forbidden to perform maintenance, dismantle unauthorized
device professionals to avoid the risk of fire, electric shock or other risks.
When a problem occurs, immediately discontinue use of the device, to avoid the risk of
fire, electric shock or other risks.

M
I

Faults:

M
O
A
I
X

Overheating of power cord socket in the cooking process.
Seepage incomprehensible smoke / steam or burnt odor.
Availability split some parts of rice cookers, they are slacking or the presence of
incomprehensible noise.
The deformation of the cup.
As well as other faults.

M
O

Name: Pressure IH Rice Cooker;
Model: YLIH01CM;
Capacity: 3.0L;
Heating method: IH heating;
Power Rating: 1100W;
Voltage / Rated Frequency: 220V - 50Hz;
Nominal working pressure: 20kPa;
Dimensions: 300 x 251 x 212 mm;
Wireless connectivity: Wi-FiIEEE 802.11 b / g / n 2.4GHz;
Certificate number for this model: CMIIT ID: 2014DR5056 module.

Name of product

YLIH01CM
YLIH - short description of the functional characteristics.
01 - serial number of the construction.
CM - manufacturer.

Presence of toxic and hazardous substances

0: toxic and harmful substances in all components of the device are contained in an
amount below the limit value according to SJ / T11363-2006 «limit the requirement for
toxic and hazardous substances in products.»
X: indicates the presence of toxic and harmful substances, at least one of the
components of this product in excess of the limit value, according to SJ / T11363-2006
«Requirements limiting the presence of toxic and hazardous substances in products.»

8

Schematic diagram

C
.I

M
I

M
O
A
I
X
1. The main control circuit board
2. Connection cable
3. Power panel (switchboard)
4. The side walls of the heating unit
5. The upper surface of the heating unit
6. Temperature Sensor bottom surface
7. The upper surface of the temperature sensor
8. The solenoid valve

M
O

9. Hall Sensor
10. Temperature sensor IGBT
11. Speaker
12. Fan
13. Temperature fuse
14. The electromagnetic coil (solenoid)
15. The fuse of electric current

Warranty

Warranty service is carried out in accordance with the law on «consumer rights» and the
«Law on the quality of products.»

returns). At the same time return the goods within 7 days after the purchase is not possible
in the following cases: the goods for damage incurred due to the human factor, missing or
damaged packaging, or any component.

The warranty service includes:

3. Within 15 days from the date of purchase and signing the warranty card, in the event of
a problem, if its cause is not the human factor, the buyer can choose a free replacement or
repair of the goods (free samples of goods can not be exchanged).

1. Within 7 days of purchase and signing the warranty card, in the event of a problem, if its
cause is not the human factor, after the presentation of the current guarantees and other
documents, the buyer can choose a free replacement product, return or repair.
2. When returning goods purchased on the official Xaiomi website or through other official
Xaiomi representation, without any justification, within 7 days after purchase, all shipping
costs assumes the consumer (when returning the purchase payment for travel costs not

9

V Terms that are not included in
the warranty service

I Warranty terms
Note: In the process of transportation of goods is necessary to ensure its integrity and
security. Therefore, we recommend that you retain the packaging for at least 15 days
from the date of purchase. If you need to perform a refund or replacement product, but its
packaging is damaged or absent, the buyer shall reimburse the cost. Thank you for your
understanding!

II Warranty period

C
.I

M
I

The warranty period is calculated from the date of receipt of the goods by the buyer or
its installation;
If you can not tell the date of receipt of the goods or their installation, the warranty
period is calculated from the date shown on the sales receipt;
If you can not provide documentary evidence of a valid warranty card, warranty service
is valid for 6 months from the date of manufacture the device;
If you can not provide documentary evidence of a valid warranty card and can not see
the production date, in this case, the warranty is valid for 6 months from the date of the
earliest appearance of the product on the market.

M
O
A
I
X
III Documentary proof of a valid warranty card

M
O

1. Damage or breakage caused by the fault of the consumer, resulting from
transportation, improper storage or use;
2. Making the device, its maintenance by unauthorized representatives of other
companies, causing any damage (including, if the user to repair or disassemble the
machine);
3. No warranty card, purchase receipt or other proof of purchase;
4. The presence of patches, the mismatch of the sales receipt or the warranty card with
the goods;
5. Damage caused by force majeure;
6. The warranty period has expired;
7. The emergence of problems as a result of use of the product in improper
surroundings, which does not match the description in the manual (eg, voltage,
ventilation, etc.).

If you have any questions, go to the site after-sales service or call technical support.
Producer: «Shanghai Chunmi Electronic Technology»
Location: China (Shanghai), district. Ziyou Maoyi Shiyan, ul. Shengxia 399, avenue k.1,
zd.328, k.3075
Standard: GB 4706.1-2005 GB 4706.19-2008 GB 4706.14-2008 GB 9684-2011 Q31 /
0115000393C001-2015
This product has additional elements made from a plastic material that has been
manufactured and provided by company «Foshan Maijinyi Siliao» Ltd.
Located on the production license: Guandun XK16-204-01896

To confirm the applicable warranty after-sales service you can provide a signed receipt
for the goods, receipt and warranty card.

IV Measuring cup, spoon (flat surface), spoon (soup)
are not included in the warranty service

XIAOMI-MI.COM

10



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : (none)
Create Date                     : 2016:07:25 20:27:30+03:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2016:07:25 20:29:08+03:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:07:25 20:29:08+03:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:dcf77e2f-4d2c-42e7-a904-a46666c30143
Original Document ID            : xmp.did:2F5266B8D750E6119CDEEC0D1DD3DA09
Document ID                     : xmp.id:9DE5C30A8D52E611A2599894751498C1
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:9CE5C30A8D52E611A2599894751498C1
Derived From Document ID        : xmp.did:A2E383447052E611A2599894751498C1
Derived From Original Document ID: xmp.did:2F5266B8D750E6119CDEEC0D1DD3DA09
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:07:25 20:27:30+03:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 10

EXIF Metadata provided by EXIF.tools