XinHuaMei Electronics BTH102 Wireless Bluetooth Headphone User Manual manual UK

Download:
Mirror Download [FCC.gov]
Document ID	2326989
Application ID	5BOJYx0lCijetAGfOFPZaw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.15kB (89391 bits)
Date Submitted	2014-07-16 00:00:00
Date Available	2014-07-16 00:00:00
Creation Date	2014-07-14 16:20:33
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2014-07-14 16:20:33
Document Title	Microsoft Word - manual UK.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	vincent

BLUETOOTH® HEADPHONE
USER MANUAL
*The picture is only provided for reference. Please refer to the actual unit!
GETTING STARTED
Please read this user 's manual carefully before using the product to make a correct use of all
functions and know well about the system connection and usage.
Please keep this manual in a safe place for future reference.
INTRODUCTION
This Bluetooth® headphone will allow you to listen to your music wirelessly from your mobile
phone, tablet or other Bluetooth® enabled device. It delivers powerful and clear sound. The built-in
microphone will allow you to answer calls from mobile phone.
WARNING
Prolonged use of headphones at high volume may cause irreparable hearing loss. We strongly
advise you to adjust your listening volume to a reasonable level. The higher the volume, the more
you risk damaging your hearing quickly.
We also recommend you to use your headphones responsibly! It is dangerous or even illegal in
some areas, to use headphones in situations that require your full attention, such as driving a car,
motorcycle or bicycle, but also as a pedestrian when crossing the street, etc..
PRECAUTIONS
First thank you for buying ON.EARZ Lounge Bluetooth® headphone. Please refer to this Users’
Manual before use to use it properly. The contents stated herein may be modified from time to time
for better service as the product properties and functions are changed without prior notice. For the
sound performances of the product, never use it in too cold, too hot, too dusty or humid places,
especially:
1. Moist or underwater conditions
2. Near the heater or hi-temperature services
3. Solarization
4. Places apt to fall
5. Never disassemble the combination audio; otherwise, it may invalidate the warranty.
PRODUCT OVERVIEW
Key description
1: Foldable and adjustable headband
2: Multi-function button (MFB) : Power on/power off/answer a call/end a call/reject a call/redial
last number/pause/voice dial/play/switching between lines (three way calling)
3: “/V+” button: Short press for Next track; Long press to increase Volume
5: LED indicator (see below for function details)
6: Built-in microphone
7: 3.5mm Aux-in jack
8: Micro USB Charging port
Fonction of LED indicator
A. When charging
RED LED is on when the battery is charging.
RED LED is off when battery charge is finished.
B. When using the headphone
RED and BLUE LED blink alternately when the headphone is in pairing mode.
BLUE LED blinks every 3 seconds when there is no phone conversation.
BLUE LED gradually turns on and off during phone conversation.
RED LED blinks with sound alert when the battery has low power.
CHARGING THE BATTERY
The headset comes with a built in rechargeable battery. Before using it for the first time we
recommend you charge the battery fully. Only use the supplied USB Cord to charge the headset.
Please charge for 4 hours.
Connect the micro USB connector of the charging cable into the micro USB port on the side of the
headphone. Connect the other end of the USB cable to your computer’s USB port or to an optional
USB wall charger (not included)
The RED LED indicator light is illuminated.
The RED LED indicator light shuts off when the speaker is fully charged. (Approximately 4 hours).
OPERATION INSTRUCTIONS
SWITCHING ON/OFF
Switch ON : Press and hold the MFB for 2-3 seconds, until the LED flashes BLUE.
Switch OFF: Press and hold the MFB for 3-5 seconds , until the LED stops flashing.
PAIRING INSTRUCTIONS
You need to pair the headphone with your Bluetooth® enabled device (smartphone, tablet, mp3
player, computer, etc.) before enjoying the music wirelessly with the headphone.
Enter in pairing mode
Be sure that the headphone is in power off status first, press and hold the MFB for 3-5 seconds,
until red and blue led blink alternately. Then release the MFB button, the unit is now in paring mode.
Pairing the headphone with Bluetooth® devices
Make the headphone enter into pairing mode (please refer to above section)
After searched, select ”OE-BTHS01” in the device list on the Bluetooth® device.
If a password is asked, enter the “0000” and press ”connect” (only some Bluetooth® devices will
ask for a password)
When the connection is successful, beep sound will be heard and the BLUE LED will flash quickly
for a few times while paired.
Please note pairing mode on the headphone will last for around 3 minutes. If no devices are paired
within around 3 minutes the headphone will automatically return to standby mode.
If pairing is unsuccessful, turn off the headphone first and then re-pair again following the above
steps.
Re-connecting to Bluetooth® devices
Every time the headphone is switched on, it will connect to the nearest and the last connected
device automatically .
When the headphone is in standby mode and doesn’t connect to any device, short press the MFB
button and it will connect to last connected device automatically.
LISTEN TO MUSIC
When the headphone is correctly paired with your Bluetooth® device, simply start to play music on
your device and you can enjoy the sound wirelessly in your headphone.
Volume up in music mode: Long press on volume ”+” key. You will hear a beep tone when the
maximum volume level is reached.
Volume down in music mode: Long press on volume ”-” key. You will hear a beep tone when the
minimum volume level is reached.
Go to next song of your playlist: Short press on the Next « + » key.
Go to previous song of your playlist: Short press on the Prev « + » key.
Play/Pause music: Short press on the MFB to pause the music. Short press again to play again.
HANDS-FREE FUNCTION
You can answer calls from your mobile phone when the headphone is paired with your mobile
phone. If you receive a call when listening to music, your music will pause automatically and you
will hear your telephone ring tone in the headphone.
Answer a call: Short press the multifunction button.
Reject a call : Press and hold the MFB button for 2 seconds until an indication tone is heard.
End a call: Short press the multifunction button.
Volume up in conversation mode: Long press on volume ”+” key. when the volume has reached
the maximum level, you will hear an indication tone.
Volume down in conversation mode: Long press on volume ”-” key, when the volume has reached
the minimum level, you will hear an indication tone.
Voice Dial : when connected to a device in standby mode, press and hold the MFB button for 2
seconds and release when your hear the indication tone.
Redial the last number : when connected to a device in standby mode, short press the MFB button
twice.
Three-way Calling
New incoming call during phone conversation : to put the call on hold and answer the new
incoming call, press and hold the MFB button to switch between the phone calls.
New incoming call during phone conversation : to end the current call and answer the new
incoming call, short press the MFB button once.
AUX FUNCTION
You can use the 3.5mm cabled included in the kit to play music once your Bluetooth is turned off or
once the battery of the device is out of power. Connect one end of the 3.5 mm aux cable into the
Aux jack of the headset. The other end of the cable connects to the 3.5 mm jack of your mobile
phone / computer / audio devices.
(Note: Bluetooth mode should be turned off while using the AUX feature. Don’t connect Bluetooth
between your headset and your mobile phone when Aux is being used.)
MOBILE DEVICES SUPPORTED
In theory, it can support all equipments with Bluetooth®-enabled phone or music device that
supports Advanced Audio Distribution Profile (A2DP) and Audio Video Remote Control Profile
(AVRCP). In order for Bluetooth® devices to communicate with one another properly, they must
utilize the same Bluetooth® profile. To determine the profiles supported by your device, please
refer to the device's user guide. Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth®-enabled devices, and/or the functionality of such features
may be limited in certain devices.
GUIDANCE ON SIMPLE TROUBLESHOOTING
Bluetooth® pair and connection fail
Other cell phone or equipment has been connected before connection, and has not left yet and
Bluetooth® cannot be switched off. When connection feature is employed again, the Bluetooth® unit
will automatically search for this Bluetooth® equipment for connection. First turn off the Bluetooth®
feature of Bluetooth® equipment and the next Bluetooth equipment can search, pair and connect
normally.
The indicator lamp does not turn on and the Bluetooth® unit is not available
Bluetooth® unit has not operated for a long time, and may come into dormant state, then press the
MFB on the unit for a longer time to re-use it.
Low Bluetooth® volume
Check the volume level of your Bluetooth® device when playing the music and increase the volume
if needed.
Short Bluetooth® connection distance
There is a barrier between the cell phone and Bluetooth® headphone, please clear it away.
Bluetooth® may be normally connected and played, but sometimes, there is interrupted
1. There is a barrier between device phone and Bluetooth® headphone, please clear it away.
2. The distance between the Bluetooth® unit and connected device is too far away, out of normal
connection range. Please put them nearer.
SPECIFICATIONS
Bluetooth® specifications: 3.0+EDR
Working distance: up to 10 meters in open space
Supporting Profiles: HSP/HFP/A2DP and AVRCP Profiles
Built-in microphone for answering calls from mobile
Aux in port for cable connection of audio device
Built-in rechargeable lithium battery - Charging time 3 to 4 hours*
Up to 6 hours playing and 8 hours talk time*
* Battery life & charging time may vary, based on usage & types of devices used
Power: Micro USB cable
Unit size: 175 x 172 x 52 mm - Unit weight: 130 gr.
Box content : Bluetooth® Headphone – Micro USB cable – Aux In cable – User manual
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which
the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : vincent
Create Date                     : 2014:07:14 16:20:33+08:00
Modify Date                     : 2014:07:14 16:20:33+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : vincent
Title                           : Microsoft Word - manual UK.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:04d1ba29-be48-439d-80ab-0793ae108499
Instance ID                     : uuid:1b5cb909-7327-4bfa-ad34-870f85832536
Page Count                      : 5

EXIF Metadata provided by EXIF.tools