XinHuaMei Electronics BTS-06 Mini Bluetooth Speaker User Manual BTS 06
Shenzhen XinHuaMei Electronics Limited Company Mini Bluetooth Speaker BTS 06
User Manual
Product overview WATERPROOF BLUETOOTH SHOWER SPEAKER BTS-06 USER MANAL Thank you for choosing our product. We hope you will enjoy it very much. Accessories included 1. USB charging cable Charge Integrated Battery Safety instructions This Bluetooth speaker is powered by integrated rechargeable lithium battery. Charge the battery as follows: 1. Insert the charging cable into the DC 5V socket on the unit. Connect the USB plug into a PC or AC/DC adaptor. The LED indicator turns red and the battery is being charged. 2. When the battery is fully charged, the red LED indicator goes out. Read this manual carefully before putting the appliance into operation and keep this manual for future reference. Keep the device away from heat, direct sunlight and sharp edges. Keep the device away from naked flames. Do not insert any metal object into the device. Risk of short circuit! To avoid a static charge, do not use Pairing BTS-06 to mobile phone or other device the device in an extremely dry climate. Do not repair the unit yourself but contact an authorised specialist. Activate the Bluetooth speaker’s pairing mode by, when in power off mode, press and hold the on/off button for about 6 seconds until the red LED and blue LED are flashing alternatively. Now the speaker is ready for pairing. DC5v 1. Turn on your mobile phone and activate the Bluetooth function. 2. Search for Bluetooth devices. BTS-06 will show up. 3. Pair your device with BTS-06. If password is needed, type in “0000". After BTS-06 is paired with your device, connect it to your device. Tips: Once this speaker is paired and connected to your mobile phone, next time when you switch on this speaker, it will connect to your mobile phone automatically as long as the Bluetooth in your mobile phone is on. Button description On/Off: To switch on or off the unit. Short press for the previous song, long press for turning down the volume. Short press for the next song, long press for turning up the volume. Phone: To pick up or hang up a phone call Play/Pause the music. Troubleshooting Symptoms Causes Solutions Can not switch the speaker on Battery empty Charge the battery Unable to pair the speaker Speaker is already switched on, and it is not in pairing mode. Refer to the section of “Pairing BTS06 to mobile phone or other device” Technical Specifications Bluetooth support: 3.0+EDR Range: 10 meters Transmitting frequency: 2.4G Hz Power supply: DC5v/100-120mA Battery: 3.7v 400mAh lithium Charging time: approx. 3 hours Operating time: approx. 6 hours IP grade: IPx4 Unit weight: approx. 0.1kg Tips: Please make sure the speaker is in power off mode when trying to activate the pairing mode. Company: Shenzhen XinHuaMei Electronics Limited Company. Name: Mini Bluetooth Speaker Model Number: BTS-06 FCC ID: R8HBTS-06 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment。 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2013:01:26 17:34:47+08:00 Creator Tool : CorelDRAW Modify Date : 2013:07:04 11:09:40+08:00 Metadata Date : 2013:07:04 11:09:40+08:00 Format : application/pdf Creator : Administrator Title : BTS-06 user manual.cdr Producer : Corel PDF Engine Version 14.0.0.701 Document ID : uuid:32f2d6a3-ca18-41d4-839d-5577ffe5a00f Instance ID : uuid:e1cba404-6b41-4f54-bd36-2f67c3030d8e Page Count : 2 Author : AdministratorEXIF Metadata provided by EXIF.tools