Xinwei Electronic Quanzhou HSH39 Bluetooth Headset User Manual H39 USER S MANUAL OK

Download:
Mirror Download [FCC.gov]
Document ID	948064
Application ID	sNzcQ/NdLQAzUycPNoCg3g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.61kB (182669 bits)
Date Submitted	2008-05-28 00:00:00
Date Available	2008-05-28 00:00:00
Creation Date	2008-05-28 11:43:56
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-05-28 11:44:23
Document Title	Microsoft Word - H39-USER‘S MANUAL-OK.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	daniel

Content
Content…………………………………………………….……......1-2
Welcome to use H39 Bluetooth headset..…………………………….3
Introduction………………………………………………………....…4
Bluetooth headset illustration……………………………………....…..4
Using guide
①Charging Your Headset Battery………………………...…..... …….6
②How to Power On/Off Your Headset.……….……………………….7
③Pairing Your Headset with Phone.………………….... …………...7-8
④Pairing to additional devices and Adjust Headset Volume…. …….10
⑤Wearing your headset.….……………………………….…..…....11
⑥Communication Function……………………………………...12-13
Using Your Headset Indicator LED…………………………………14
Audio frequency Alarm……....…………………..…………….……15
Troubleshooting.......……………………………………………..……16
Care and maintenance……………………………………………16-17
Welcome to use H39 Bluetooth headset
H39 wireless Bluetooth headset surpass the tradition. It is compact,
small and lightweight, also easy to use. Bluetooth V2.0 transmit more fast,
voice quality better and high ability to avoid interference, Although you
don’t need wire connect anymore, you will more close with the pioneer
global Bluetooth science and technology. Free to communicate with
others. Please read this manual carefully before using and keep it for
future reference.
Introduction
What is Bluetooth Wireless Technology?
Bluetooth devices communicate without wires, using built-in radio
transceivers that operate on a globally available radio frequency to ensure
worldwide compatibility. Your Bluetooth wireless headset can
communicate with other Bluetooth devices within a range of
approximately 10 meters (33feet).
How to use the Wireless Headset?
Your Wireless headset, with Bluetooth technology, lets you connect
with other similarity equipped devices. Such as using with Nokia 6230.
Use your phone hands free
Handle incoming and outgoing call with the handset
Multifunction control button (MFB)
Use voice activation to make calls
Volume down
Multi-function key
Volume up
Receiver
Charging port
Rotatable
ear hook
State indicator light
Microphone
Using guide: ①Charging
Charging
First Time Use-Before you can use your headset, charge its
self-contained battery for more than two hours.
Recharging-when you hear five rapid high tones through the headset
speaker, repeats at 20-second intervals, the headset battery needs
recharging. Charge it until the red LED goes out. Fully charged will cost
about 2 hours. when you are in a car, you can use the original car charger
to charge the device.
Note: After fully charged, the battery offers:
Talking time: about 5 hours
Standby time: about 130 hours
Warning: ① Never dispose of batteries in a fire because they may
explode.
②Do not keep connecting the headset with the charger for a long time.
Over charged will shorten the using time of the battery.
●How to Power On/Off Your Headset
To Power Your Headset On
Steps:
Press and hold the Multi-function key for 5 seconds until the blue LED
flashes rapidly.
To Power Your Headset Off
Steps
Press and hold the Multi-function key for 3 seconds until the red LED
flashes rapidly.
●Pairing Your Headset with Phone
Note: You must pair your headset and phone before making a call.
“Pairing” creates a link between devices with Bluetooth wireless
technology, and allows the phone to remember the headset’s unique ID.
When your headset and phone are paired, your headset automatically
connects to your phone.
Pairing:
Steps:
1, Place the headset and phone together, With the headset off, hold the
multifunction Button until the LED remains on (about 8 seconds),it means
it has entered the pairing mode.
2，Performa device discovery for your phone, refer to the phone’s user
manual . When the scan is complete, the phone displays the devices have
been searched..
3，Select the logo and model number from the discovered devices list and
confirm the following on screen prompts.
4，When prompted by the phone enter the password 0000 and confirm to
pair the headset with the phone.
Important note：The indicator flashes every 3 seconds once paired successfully,
please contact again if it fails.
Pairing with additional devices
The headset can store pairing information for up to eight different
devices through Bluetooth wireless technology. Devices are stored in a
“Paired Device List” in memory in the order entered. When an attempt to
pair with more than eight devices, the former paired device will be
removed from the list. Any of the eight paired devices can initiate a
connection to the headset. The headset will only automatically initiate a
connection (upon power-up) with the last device which is connected to. If
you want to connect the headset to another device in the paired device list.
You must initiate the connection form that device. Whichever of the eight
devices initiates a connection to the headset afterwards. That device then
becomes the “last connected” device.
●Adjusting Headset Volume
To increase speaker volume, press the volume up key repeatedly until you
reach the desired volume level.
To decrease speaker volume, press volume down key repeatedly until you
reach the desired volume level.
How to wear the Bluetooth headset
1,Wear the headset in the ear. Actually,
The capability is better than there is
Something interruption (including your
body)
2,Just adjust the direction
of the ear hook while you want to
put the headset in left/right ear.
As the picture shows.
3,To change the volume ,please see:
“Adjust headset volume” on page 26
for reference.
left
10
right
Communication Function
Your headset supports both hands-free and headset profiles.
Accessing call functions depend on which profile your phone supports.
Note: Some phone do not support all features listed. See your phone user
manual .You can activate call functions for the Hands-free profile
according to the following
Function
State
State
Operation Steps
(Mobile phone)
(headset)
(headset)
On
off
Enter
Pairing
hold the Multi-function key
(about 8 seconds)
Mode
Short press the Multi-function
Make Voice
standby
On
Dial Calls
Redial a
number
until the blue LED remains on
key, then speak out the voice
command
On---Voice
dialing on /off
On--（standby）
short press the Multi-function
key twice
11
Function
State
(Mobile phone)
State
(headset)
Operation Steps
(headset)
short press
End a call
on---on a call
on
the multi-function Key
keep one call
on---on a call
on
hold the Multi-function key
on---phone rings
on
the Multi-function Key
waiting
short press
Receive a call
（calling available）
Reject a call
Answer the
2nd Incoming
call
on---phone rings
On-0n a call, the
2nd call comes in
on
hold the Multi-function key
on
hang on the 1st call and receive the
hold the Multi-function key to
2nd call
Note: The headset will try to connect again once disconnection
happens (for example: out of service).
12
Indicator light
With charger plugged in:
Headset Indicator
On
Off
Status
Charging in progress
Charging complete
Without charger plugged in:
Headset Indicator
Off
ON (Steady)
10 rapid flashes
Flashes at a 3-second interval
(1. seconds ON2.9 seconds OFF)
Pulses at an 8-second interval
(2.0 seconds ON6.0 seconds OFF)
Status
Power off
Pairing mode
Pairing successful
Standby (not on a call)
Connected (on a call)
Note：After pairing, if disconnected with any device for 30 minutes, the
headset will be turned off automatically to save power.
13
Audio Tones
Audio Tone
Single high tone when pressing
volume button
Five rapid high tones, repeated
every 20 seconds
No audio indications, deteriorating
communication quality
Ring tone
Single high tone
Single low tone
No tone
14
Headset Status
Volume maximum or minimum
reached
Low battery
Out of range
Incoming call
Pairing confirmation
Initiate voice activation
Power ON/OFF
Troubleshooting
When the Bluetooth headset can not be connected with the mobile
phone, please do as following:
● Make sure the Bluetooth headset was turned on and was paired with the
handset.
● The Bluetooth function was startup.
● Check that the distance between the handset and Bluetooth headset over
10 meters or not, or weather there are some stumbling blocks between
them, such as walls or other electronic equipments.
●The paired Bluetooth list maybe full of message. One Bluetooth headset
can be linked up (or "paired") with up to 8 devices. Please pair the headset
again when the paired handsets was full.
● If the headset can not be connected with the selected or recently used
handset automatically. Please use the charger to plug in again or turn off
the power and pair it again.
15
Care and Maintenance
Your Bluetooth headset is a product of superior design and
craftsmanship that should be treated with care. The suggestions below
will be helpful for your warranty coverage.
● Keep all accessories out of the place that can be reached by little
children.
● Keep the device dry. Rain water、humidity and all types of liquids
or moisture may contain minerals that will corrode electronic circuits, if
your headset does get wet, please use it after completely air it.
●Do not use or store the device in dusty、dirty areas. Its moving parts
and electronic components will be damaged.
●Do not store the device in the areas which are too hot, high
temperatures will shorten the using time of electronic devices, damage
batteries, and warp or melt certain plastics.
●Do not store the device in the areas which are too cold, when the
16
device returns to its normal temperature, moisture will be formed inside
the device and damage the electronic circuit board.
●Do not attempt to drop 、knock or shake the device, Rough handling
will damage the inside circuit board and the precious structure.
●Do not use the harsh chemicals 、 cleaning solvents or strong
detergents to clean the device.
●Do not paint the device, painting may clog the moving parts and
prevent proper operation.
All the above suggestions are also suit for your headset、battery、
charger, or any spare part. If any device doesn’t work properly, take it to
the nearest authorized service institution for service.
17
FCC Warning Statement
This device compiles with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) The device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radio Frequency Exposure statement
This product has been evaluated under FCC Bulletin OET 65C and found
compliant to the requirement asset as set forth in CFR 47 section 2.1093
and 15.247(i) addressing RF Exposure from radio frequency device. The
18
redialed output power of this product is far below the FCC radio frequency
exposure limits.
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 19
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1d0429a4-4e5d-4194-b196-5f01723cbc4b
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:05:28 11:43:56-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:05:28 11:44:23-07:00
Metadata Date                   : 2008:05:28 11:44:23-07:00
Document ID                     : uuid:393749d8-692c-4ab4-abc4-f7a7d7526804
Format                          : application/pdf
Title                           : Microsoft Word - H39-USER‘S MANUAL-OK.doc
Creator                         : daniel
Author                          : daniel

EXIF Metadata provided by EXIF.tools