Xinwei Electronic Quanzhou HST11S Bluetooth Headset (Stereo) User Manual T11S

Download:
Mirror Download [FCC.gov]
Document ID	786891
Application ID	fCmqYnFzw4OlZAzV/l5PBg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.78kB (122225 bits)
Date Submitted	2007-04-30 00:00:00
Date Available	2007-04-30 00:00:00
Creation Date	2007-04-30 13:42:23
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-04-30 13:42:23
Document Title	Microsoft Word - T11S user manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	daniel

User’s manual
Welcom to use Stereo Bluetooth headset
T11S stereo wireless Bluetooth headset surpasses the tradition. It is compact, small and lightweight, also easy to use. Bluetooth
V2.0 transmit more fast, voice quality more better and high ability to avoid interference, Although you don’t need wire connect anymore,
but you will more close with the pioneer global Bluetooth science and technology. Free to communicate with others.
Please read this manual carefully before use and keep it for future reference.
Introduction
HeadsetIndicator
Charge Jack
Volume Up
Previous music
Multifunction
Button(MFB)
Volume Down
Next music
MIC
Stereo earplug
3.5mm Stereo
4 points jacks
What is Bluetooth Wireless Technology?
Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure
worldwide compatibility. Your Bluetooth wireless headset can communicate with other Bluetooth devices within a range of approximately 10
meters (33feet).
How Can I Use My Wireless Headset?
Your Wireless headset, with Bluetooth technology, lets you connect with other similarity equipped devices.Useyour phone hands freeHandle
incoming and outgoing call with the handset
Use voice activation to make calls stereo headset feature
Using your headset: ①Stereo headset charging
Charging Your Headset Battery
1. First Time Use-Before you can use your headset, charge its self-contained battery for two hours.
2. Recharging-when you hear five rapid high tones through the headset speaker, repeated at 20-second intervals, the headset battery needs recharging.
3. You can also use a Original Vehicle Power Adapter to charge the headset battery while in your vehicle.
Note: A fully charged headset battery provides approximately
4 hours talk time
70 hours standby time
Using your headset: ②Wearing your headset
Wearing your headset
1. This new item is line-clip Bluetooth,
you can wear in shoulder, collapsible
or frock pocket
2. Put the earphone into the ear.
3. Point the microphone toward
your mouth near 7-8 cm.
4. The volume adjustable
③How to power on/off your headset
To Power Your Headset On
Action
Press and hold the MFB for 3 seconds until the LED flashes rapidly.
To Power Your Headset Off
Action
Press and hold the MFB for 3 seconds until the LED flashes rapidly.
Using your headset: ④Pairing your stereo headset and phone
Note: You must pair your headset and phone before you can make a call “Pairing” creates a link between devices with Bluetooth wireless technology, and allows the
phone to remember the headset’s unique ID. When your headset and phone are paired, your headset automatically connects to your phone.
Pairing:
Action
1、With the headset off, hold the multifunction Button until the LED remains on (about 5 seconds).
2、Performa device discovery for your phone, refer to the phone’s user’ guide. When the scan is complete, the phone displays the devices found
3、Select the T11S the discovered devices list and confirm following the on screen prompts.
4、When prompted by the phone enter the passkey 0000 and confirm to pair the headset with the phone. The device ID is now stored in the phone’s memory pairing is
successful when the headset indicator flashes rapidly.
Using your headset: ⑤Pairing with other device and adjust the volume
z Your headset can store pairing information for up to eight different devices when Bluetooth wireless technology. Devices are stored in a “Paired Device List” in
memory in the order entered.
When an attempt to pair to more than eight devices is made, the oldest paired device is removed from the list.
Any of the eight paired devices can initiate a connection to the headset.
The headset will only automatically initiate a connection (upon power-up) with the last device is was connected to. If you want to connect the headset to another
device in the paired device list. You must initiate the connection form that device. Whichever of the eight devices initiates a connection to the headset afterwards. That
device then becomes the “last connected” device.
Adjusting Headset Volume
To increase speaker volume, press the top volume button repeatedly until you reach the desired volume level.
To decrease speaker volume, press the bottom volume button repeatedly until you reach the desired volume level.
Using your headset: ⑥Listening to the stereo music and answering the calling
Note: When your bluetooth stereo headset connect with your bluetooth device, the phone must be can supports Bluetooth 1.2a2db model, then you got the stereo effect.
The function of listening stereo music
1. Press the volume up (+)/down (-) Button to change the voice, which are suitable for you.
2. Press the (+) / (-) Button for 3 seconds, could skip to previous track/ next track.
Answering the calling
1. If coming call with ringing then press the MFB Button and receive the call.
2. If your phone rings the Stereo Bluetooth mutes the music and lets you answer the call with UT-T11S .When the call ends the headset continue the stereo music.
Using your headset: ⑦Answering
Function
Device Status
Phone
Headset
Action Handsfree Profile
Enter Pairing
Mode
On
Off
Press &hold MFB until
LED remains lit. Headset
can be discover by
another Bluetooth device
Make Voice
Dial Call
On in idle
On-（Idle）
Short press MFB, speak
name, phone dials call
Redial a
number
On-voice
dialing turned
on or off
On-（Idle）
Short press MFB 2 times
End a call
On-in call
On-in call
Short press MFB
Headset
Action Handsfree Profile
Function
Device Status
Phone
Receive a call
On-Phone rings
On-rings
Short press MFB(call is
answered)
Reject a call
On-Phone rings
On-rings
Long press MFB
Answer 2nd
Incoming call
On-in call,2nd
call coming in
On-in call
Long press MFB places 1st
call on hold, answers
incoming calll
Phone play
music
On-in play
music
Long press VOL+/more than or less than 3
seconds
Choose the
opern
Stereo headset indicator LED
With charger Plugged in
RED light on
Charging in progress
RED light off
Charging complete
With no charger plugged in
No light on
Power off
Power on （Blue and red light flash）
Pairing mode
3 time rapid flashes
Pairing sucessfully
Flashes at a 3-second interval
seconds ON2.9 seconds OFF)
Standby (not on a call)
Pulses at an 8-second interval(2.0
seconds ON6.0 seconds OFF)
Connected (on a call)
Note: When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED
turns off, any button press on the headset, resets the timer and the flashing resumes. If you press the up and down
volume buttons at the same time during a call the pulsing LED turns off for the duration of the call.
Audio Tones
Audio Tone
Headset Status
ingle high tone when pressing
Volume maximum or minimum
volume button
reached
Five rapid high tones, repeated
Low battery
every 20 seconds
No audio indications,
Out of range
deteriorating audio quality
Series of 4 tones, low to high
Audio link open (headset mode).
Active call (hands free mode)
Ring tone
Incoming call
Single high tone
Pairing confirmation
Single low tone
Initiate voice activation
Dual high/low tone
Voice tag not recognized
Single high tone
Series of 4 tones, high to low
End call
Audio link closed (headset mode)
Call ended (hands free mode)
Fast high/low tone every 5
No network/service
seconds (max & min. volume
confirm beep)
No tone
Power ON/OFF
Troubleshooting
When the Bluetooth headset can not connect with the handset. Please do follow operation:
1.
Make sure the Bluetooth headset was turn on and was paired with the handset.
2.
The Bluetooth function was startup.
3.
The distance between handset and Bluetooth headset no over 10M, or there are some stumbling block between the Bluetooth headset and handset like wall or other
electron equipments.
4.
The paired Bluetooth list was full in the message. One Bluetooth headset can be linked up (or "paired") with up to 8 devices. Please pair the headset again when the
paired handsets was full.
Note: When the headset cannot connect with the selected handset automatically. Please use the charger to plug in again or turn off the power and pair it again.
Care and Maintenance
Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will be help your warranty coverage.
*Keep all accessories and enhancements out of the reach of small children.
*Keep the device dry, precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get
wet, remove the battery and allow the device to try completely before replacing it.
* Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
* Do not store the device in hot areas, high temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
*Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit
boards.
*Do not attempt to open the device other than as instructed in this guide.
*Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
*Do not sure harsh chemiosmotic, cleaning solvents, or strong detergents to clean the device.
*Do not paint the device, paint can clog the moving parts and prevent proper operation.
All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Modifications not authorized by the manufacturer may void users authority to operate
this device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:3d5695d2-00cd-4d18-9113-5ca206cf9c53
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2007:04:30 13:42:23-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:04:30 13:42:23-07:00
Document ID                     : uuid:2bc0f683-7752-47e4-94cc-81de648b1432
Format                          : application/pdf
Title                           : Microsoft Word - T11S user manual.doc
Creator                         : daniel
Author                          : daniel

EXIF Metadata provided by EXIF.tools