Xirgo Technologies XT4800 GPS Asset Tracking Device User Manual user guide

Xirgo Technologies Inc. GPS Asset Tracking Device user guide

user guide

1XT-4860G5 User GuideModel: XT-4860G5FCC ID: GKM-XT4800Version 1.8
2Table of ContentsDocument Change History .......................................................................................... 31 Introduction ............................................................................................................ 41.1 Feature Matrix................................................................................................................................................................................. 42 Hardware Description .............................................................................................. 52.1 Hardware Specifications ............................................................................................................................................................. 62.2 Cable Harness Description......................................................................................................................................................... 72.3 LED Description.............................................................................................................................................................................. 73 Device Mounting Options ........................................................................................ 83.1 Screw Mounting.............................................................................................................................................................................. 83.2 Magnetic Mounting........................................................................................................................................................................ 83.3 Optional Cradle Mounting .......................................................................................................................................................... 94 Quick Start Guide................................................................................................... 104.1 Device Wakeup .............................................................................................................................................................................104.2 Configuring the Device via SMS..............................................................................................................................................11
3Document Change HistoryRevisionDateAuthorChanges1.05/23/2014Johnny ChenDocument Creation1.15/23/2014Johnny ChenModified 4.2 to reflect the XT48601.25/27/2014Johnny ChenUpdated Table of Contents and changed 4.2 text type to fix TOCChanged Penta-Band to Dual band in 2.1Removed pending from certifications in 2.1Changed Bracket pic in 3.3 to updated pics (3 total)Incorporated Nader Changes1.37/2/14NBFCC/IC Reg. Statements added1.47/5/14NBAdded Clarinet/Diapason Label orientation1.58/11/14NBUpdated FCC/IC Reg on Page 12. Added Model and FCC on coverpage1.68/13/14NBAdd Regulation Compliance Info Per nwahl feedback1.78/14/14NBUpdated ref to Model to XT-4860G51.88/20/14NBAdded 12V nominal voltage to DC operating range
41 IntroductionXT-4860G5 is an energy harvesting global multi-band 3G platform supporting long term, remotedeployments without the need to replace the self-charging battery. This installation guide describesthe physical hardware, associated parts, the different mounting options available, and a quick start-upprocedure.1.1 Feature MatrixFeature DescriptionBase UnitZigbee®Upgrade3G Communication Module with 2G RollbackGPS Receiver for Tracking ApplicationsSupports SMS, TCP, UDP, FTPOver-the-air Configuration and FW UpgradeLocation PollingPeriodic ReportingWired or Virtual Ignition On/Off ReportingDirection Change AlertsSpeed Threshold AlertsMileage Threshold AlertsMain Battery Disconnect AlertsHeartbeat and Power-up/Reset AlertsIgnition Idle Alert (wired ignition only)Towing Start/Stop Alerts(wired ignition only)Movement Start/Stop Alerts (wired ignition only)2 Digital InputsPark Time Alerts (wired ignition only)Virtual OdometerMotionSleep/Wake Configuration SettingsGeofence (Radial, Rectangular, and Polygonal)Device Diagnostics (Battery voltage, connectivity, etc.)Wireless Sensor ConnectivityInter-device Communication
52 Hardware DescriptionBelow is a depiction of key interfaces of the XT-4860G5:The Associated Cable Harness that interfaces with the unit is shown below:Solar PanelLED IndicatorsDevice LabelWake-up/Zigbee PairingButtonZigb7-Pin BayonetConnector
62.1 Hardware SpecificationsTechnology3G UMTS/HSDPA/HSUPAModelXT-4860G5Frequency BandDual-band SupportBand II – 1900 MHzBand V – 850 MHzGPS SpecificationReceiver 50 channels50 channelsReceiver trackingSensitivity-161 dBmAccuracy+/- 2.5m CEP (50% , -130 dBm, > 6 Satellites)Cold Start<33 secHot Start< 1 secPower RequirementsD.C. Power8-24V, 12 V nominalBatteryInternal 6600mAh rechargeable Li-IonPhysical ConnectionInterface Connector8-pin attached harnessCellular/GPS AntennaInternalSIM AccessInternalProgrammingSerial (UART Logic Level)MechanicalCase MaterialABS plastic with weather-proofing for outdoor useDimension7.6” X 4.9” X 1.4”Weight< 18 oz. (Estimated)Operating Temperature-30°C to +70°CCertificationsProductPTCRBATTICIP67CarrierAT&T
72.2 Cable Harness DescriptionPin #WireColorPin NameFunctional DescriptionPort Characteristic1WhiteIN1Ignition Sense8v to 24v, Internally pulled low2YellowIN2Input port2.4 to 24V, < 0.2 VNote: Internally pulled high3BlackGroundGround4GreenOutOutput Port (Defaulted opencircuit)5BlueUART-RxExternal battery negative terminal3.3V Logic InterfaceCom Port Settings:Baud rate: 115200 bps; Flow control:None; 8N16BrownUART-Tx3.3V Logic InterfaceCom Port Settings:Baud rate: 115200 bps; Flow control:None;8N17RedVBATTMain battery voltage, DC8-24 V8OrangeADCAnalog Input8-24 V2.3 LED DescriptionLEDDescriptionStatusCellular (Blue)Searching for Cellular NetworkLED OFFCellular Carrier LockFast Blinking once every 1 secondGPS (Green)Searching for satelliteSolidGPS LockBlinkingZigbee (Aurburn)TBDTBD
83 Device Mounting Options3.1 Screw MountingThe XT-4860G5 has two flanges (two holes per) at each end of the housing for screw mountingthe device to the mounting surface.3.2 Magnetic MountingThe XT-4860G5 can also be equipped with magnets which support a load up to 10kg.
93.3 Optional Cradle MountingAn optional mounting cradle can be purchased for easy snap-on/snap-off device mounting for theXT-4860G5. The cradle will need to be screw-mounted on to the position desired.
104 Quick Start Guide4.1 Device WakeupTo start up the device, simply hold the black button located near the circular connector on theside panel of the device for 3 seconds. You should see the blue “C” LED light up and then fade out.The LED will fast-blink when the device is successfully connected to the network.Wake up Button
114.2 Configuring the Device via SMS1) Ensure your device is active on your cellular account.2) Awaken device from sleep XT-4860G5 via the “wake-up” button.3) If the device needs more power, then supply 12V DC via the red wire of the cable harness.4) Ensure device cellular LED is blinking based on LED definition in this document.5) Using your mobile phone or SMS gateway send +XT:1008 command to the device MDN6) Command: “+XT:1008,<SM>”- Sets SMS Number7) Response (via SMS): $$<UID>,<1008>,<SM>##8) Once you have set SMS to reply to your mobile or gateway, you can now send othercommands to device via SMS per device protocol documentation.a. Command +XT:1010 configures network settingsb. Command +XT:3040 and +XT:3042 configure alert and threshold settings9) +XT:7008 save device configuration to permanent memory
12FCC/IC:REGULATORY COMPLIANCE INFORMATIONThis equipment with FCC-ID: GKM-XT4800 and IC-ID: 10281A-XT-4800, Model: XT-4860G5is subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules.NOTICE:Changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment.This device complies with Part 15 of the FCC Rules and with license exempt Radio Standard Specifications ofIndustry Canada.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesiredoperation.Les changements ou modifications non expressément approuvés par la partie responsable de la conformitépourraient annuler l'autorité de l'utilisateur à utiliser l'équipement.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en compromettre le onctionnemenRadio frequency radiation exposure Information:This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance of 20 cmbetween the radiator and your body. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.

Navigation menu