XT 20P IP Ceiling Speaker Data Sheet

2018-05-16

: Xontel Xt-20P-Ip-Ceiling-Speaker-Data-Sheet XT-20P-IP-Ceiling-Speaker-Data-Sheet DataSheets

Open the PDF directly: View PDF PDF.
Page Count: 2

XT-20P IP Ceiling Speaker Data Sheet
Fault Exclude
Packing List
Network transmission rate
10/100M self-adaptation
Frequency response
100HZ-18KHZ
Audio sampling rate
8KHZ-44.1KHZ
Work temperature
-20~+50
Work Humidity
10%90% (no condensing)
Trouble phenomenon
Fault reason & exclude
Why the terminal is still "offline"?
1. Check the software server and the main
controller is normal opened or not. It`s required to
close all firewall before open the software server
(including system built-in firewall and other
antivirus software firewall).
2. Check the network connection is normal or not.
After the terminal powered on, the network port
green light is norm on, meantime the orange light
will be short and fast flash, it means the network
cable hard-connected normal. If the network port
green light is not on, it means the network hard-
connected problem; please check the terminal
network cable and switcher whether they work
normal, damaged and disconnect or not etc.
3. Check the terminal IP setting. Please check the
terminal ID, sever IP, local IP, gateway IP ...etc
parameters.
Web display abnormal?
Emptying the cache or modify the browser.
XT-20P
XT-20P IP Ceiling Speaker Data Sheet XT-20P IP Ceiling Speaker Data Sheet
Interface Description
Network interface: connect POE switcher with cables. (There is no need to connect
the power as the device support POE power supply).
Note: ②③ for reserved interface, not yet enabled.
Wiring
Note: Please refer to the user manual for more detailed information.
Appearance Installation Dimension Diagram (unit: mm)
Network parameters configuration
(1) Please input the IP address of IP ceiling speaker to the address column of the
browser (the factory default IP address is 192.168.1.101), then hit Enter.
(2) Enter into the user name and password in the web page The default user name
and password is admin, then click OK.
Specification, Functional Parts and Parameters
Power supply
POE power supply
Max SPL
97dB±3dB
Sensitivity
88dB±3dB/W/M
Network protocol
UDP,ARP,ICMP,HTTP,IGMP
Stand-by power
consumption
≤5W
Main speaker power(DC
power supply)
2*7W/ (mono connection)
Main speaker power (POE
power supply)
2*7W/ (mono connection)
Auxiliary line audio input
1Vrms/10KΩ imbalance

Navigation menu