Xplore Technologies of America TIRFID7960 MC-C5/MC-F5 User Manual C5v F5v Tablet PC User s Guide

Xplore Technologies Corp of America MC-C5/MC-F5 C5v F5v Tablet PC User s Guide

Contents

Users Manual 1

Download: Xplore Technologies of America TIRFID7960 MC-C5/MC-F5 User Manual C5v F5v Tablet PC User        s Guide
Mirror Download [FCC.gov]Xplore Technologies of America TIRFID7960 MC-C5/MC-F5 User Manual C5v F5v Tablet PC User        s Guide
Document ID1628314
Application IDKGxqJ73Axb5zhGKoEN05fw==
Document DescriptionUsers Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize340.95kB (4261920 bits)
Date Submitted2012-01-30 00:00:00
Date Available2012-07-28 00:00:00
Creation Date2017-11-02 04:05:58
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-11-02 04:05:58
Document TitleC5v/F5v Tablet PC User’s Guide
Document CreatorFrameMaker 10.0.1
Document Author: Motion Computing

C5v/F5v Tablet PC
Model CFT-003
User’s Guide
© 2011 Motion Computing, Inc. All rights reserved.
This document contains information protected by
copyright. No part of this document may be
reproduced in any form without written consent from
Motion.
The information in this document is provided “as is”
and is subject to change without notice. Motion is not
liable for errors or omissions in this document.
Motion, Motion Computing, Speak Anywhere, View
Anywhere, and QuickNav are trademarks or registered
trademarks of Motion Computing, Inc. in the U.S.A.
and other countries.
Acrobat is a registered trademark of Adobe Systems
Incorporated.
Bluetooth is a registered trademark owned by the
Bluetooth SIG, Inc., U.S.A. and licensed to Motion
Computing, Inc.
Intel, Intel Atom, Core, vPro, and Centrino are
trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the United States and
other countries.
Motion Computing, Inc. has made every effort to
identify trademarked properties and owners on this
page. All brands and product names used in this
document are for identification purposes only and
may be trademarks or registered trademarks of their
respective companies.
The warranties for Motion products are set forth in the
express limited warranty statements accompanying
such products. Nothing in this document constitutes
an additional warranty.
The Motion Computing products and services may be
covered by one or more patent-protected inventions.
Additional patents may also be pending. For more
information, see
www.motioncomputing.com/info/patents.asp.
The end user may access only one operating system
language version.
L'utilisateur final ne peut accéder qu'à une seule
version linguistique du système d'exploitation.
Der Endbenutzer darf nur auf eine Sprachversion des
Betriebssystems zugreifen.
Computrace is a registered trademark of Absolute
Software Corp.
De eindgebruiker heeft slechts toegang tot één
taalversie van het besturingssysteem.
Knowles and IntelliSonic are trademarks or
registeredtrademarks of Knowles Acoustics, Inc.
L'utente finale può accedere a una sola lingua del
sistema operativo.
OmniPass is a trademark of Softex, Inc.
El usuario final sólo podrá acceder a una versión de
idioma del sistema operativo.
Realtek is a trademark of Realtek Semiconductor
Corporation.
Microsoft, Windows, and Windows Journal are
trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Qualcomm, Gobi, and Gobi 3000 are trademarks or
registered trademarks of Qualcomm Incorporated.
SigmaTel is a registered trademark and Universal Jacks
is a trademark of SigmaTel Corporation.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks of HDMI Licensing LLC in the
United States and other countries.
Insyde and InsydeH20 are trademarks of Insyde
Software Corporation.
End users may not loan, rent, lease, lend, or otherwise
transfer the CDs or DVDs provided for recovery
purposes to another user, except as permitted in the
End User License Agreement for such product.
Model CFT-003
PN 024-02-0207 Revision A04
Loppukäyttäjä voi käyttää vain yhtä
käyttöjärjestelmän kieliversiota.
Användaren har endast tillgång till en språkversion av
operativsystemet.
Slutbrugeren har kun adgang til ét af
operativsystemets sprogversioner.
Sluttbruker kan aksessere kun én av
operativsystemets språkversjoner.
O utilizador final pode alcançar somente uma versão
de língua do sistema de exploração.
O usuário final pode acessar apenas uma versão de
idioma do sistema operacional.
Contents
Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Optional features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Mobile broadband with GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Touchscreen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
View Anywhere display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Other optional features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Overview of the C5v/F5v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Where to begin with your C5v/F5v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 1: Power up the tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 2: Connect to a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 3: Get familiar with your C5v/F5v Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Step 4: When you take a break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Optional setup tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Create a recovery image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Attach the pen tether . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connect the tablet to a docking station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connect the tablet to a display monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
For more information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 2 Using your C5v/F5v . . . . . . . . . . . . . . . . . . . . . .17
Introducing the C5v/F5v desktop and applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing the taskbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the Motion Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Accessing Motion tools from Windows notification area . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Calibrate touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
How multiple-touch works fingers for gestures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Changing to one-tap open for touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Configuring touch input mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjusting touch settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting pen settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adjusting tablet PC settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Entering text and handwriting recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Opening and closing the input panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Docking or floating the input panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Entering numbers with numbers pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Entering special keys with the extended keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the handwriting recognition program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using front panel buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Configuring front panel buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Contents
iii
Setting display options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adjusting the display brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Rotating the display orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Enabling or disabling automatic rotation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting up an external display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the built-in microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using speech recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Setting up speech recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using dictation and voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the cameras (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the web camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using the documentation camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using the barcode scanner (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Supported barcode types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Barcode scanner tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using the RFID reader (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Checking tablet battery power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Removing and replacing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Hot swapping the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Long-term battery storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Disposing of used batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Battery and power management tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Changing the power plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Changing how the power button functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using the fingerprint reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Starting the OmniPass application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Create an OmniPass user account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Replace your passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting up strong logon security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using the smart card reader (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Using the SIM card slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using Windows Action Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting up user accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Backing up your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Restoring your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Creating a system image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Restoring your system image from Windows Control Panel . . . . . . . . . . . . . . . . . . . 59
Restoring your system image if you can’t start Windows 7 . . . . . . . . . . . . . . . . . . . . 60
Restoring your system without a system image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Finding other software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Chapter 3 Caring for your C5v/F5v. . . . . . . . . . . . . . . . . .63
General care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Caring for the display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Cleaning solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Caring for the pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Replacing pen tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Cleaning in a healthcare environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Disinfecting procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
iv
Contents
Training and documentation considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cleaning the fingerprint reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Caring for the tablet battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Traveling with your C5v/F5v Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Chapter 4 Troubleshooting and FAQs. . . . . . . . . . . . . . .69
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Power problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Battery problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Display problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Touch or pen problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Ports and connectors problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Network problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Audio problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
System problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Frequently asked questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Contents
vi
Contents
Getting Started
The Motion® C5v/F5v Tablet PCs are rugged, powerful and mobile, providing real-time
access to information in the field.
This is a list of the main features of the C5v/F5v Tablet PC.
• Intel® Core™ i3, i5 or i7 vPro™ Processor
• Supports Windows® 7
• up to 128GB Solid-State Drive (SSD)
• up to 4GB DDR3 800 MHz SDRAM memory
• 32-MB to 256-MB video RAM with Intel Dynamic Video Memory Technology
• 10.4" XGA TFT LCD with 1024 × 768 native resolution
• Corning® Gorilla® Glass for increased display damage resistance
• Bright AFFS+LED Backlight Display Technology
• Touchscreen display *
• View Anywhere® display for optimal viewing in all lighting conditions *
• Intel Display Power Saving Technology
• Hot-swappable battery
• Integrated Wi-Fi® and Bluetooth®
• Integrated mobile broadband and global positioning system (GPS) receiver *
• Integrated 1.3 megapixel web camera and 3.0 megapixel documentation camera *
• Integrated fingerprint reader
• Integrated 1D/2D Barcode scanner *
• Integrated 13.56-MHz passive RFID reader *
• Smart card reader *; ISO 7816 PC/SC compliant, contact type smart card reader/writer
* Optional features are available when you purchase your tablet.
Chapter 1 Getting Started
Optional features
This section describes the optional features available when you purchase your C5v/F5v.
Mobile broadband with GPS
You can choose to purchase a C5v/F5v Tablet PC with the optional mobile broadband with
GPS module. When installed, the module provides:
• Worldwide mobile broadband support
• Worldwide global positioning (GPS) support
Motion Connection Manager is an application that you use to manage your mobile
broadband and GPS network connections. For information on setting up mobile
broadband, see “Set up mobile broadband with GPS” on page 10.
The GPS receiver uses satellites to determine the current location, altitude, heading and
horizontal velocity of the C5v/F5v. You can use it with your preferred mapping applications
to find your current and desired locations.
Security
Your tablet includes several features that you can use to enhance the security of your data
and serve as the foundation for complementary security technologies. The core security
features include password-protected Phoenix TrustedCore BIOS with HDD locking and
networking control, optional Computrace® tracking software, a built-in fingerprint reader,
Dashboard Security Center, and TPM (Trusted Platform Module) 1.2.
TPM is an embedded security chip that protects the hard drive and guards against
unauthorized access to data. TPM can generate and store passwords, encryption keys and
digital certificates.
TPM is used by enterprise-level software applications to implement advanced security
features such as:
• User and device authentication
• Full disk data encryption
• Restricted network access
System administrators typically configure TPM, which entails enabling TPM in the BIOS and
configuring the accompanying security software provided by the TPM manufacturer,
Infineon.
Touchscreen Display
The C5v/F5v Tablet PCs can be purchased with an optional touchscreen display so that you
can use your finger as well as a pen.
2 Chapter 1 Getting Started
Optional features
View Anywhere display
The View Anywheredisplay option enhances outdoor viewing and bright-light viewing
environments. The View Anywhere display includes all the features of the standard display
plus:
• A protective layer that improves the sunlight contrast ratio and significantly reduces
reflection and glare.
• Improved sunlight contrast ratio, which enhances viewability at wide viewing angles.
• Reduced reflection and glare and improved light pass-through efficiency.
Other optional features
Other C5v/F5v features are described later:
• Web and documentation cameras,“Using the cameras (optional)” on page 38
• Barcode scanner, “Using the barcode scanner (optional)” on page 40
• RFID reader, “Using the RFID reader (optional)” on page 41
• Smart card reader, “Using the smart card reader (optional)” on page 54
Overview of the C5v/F5v
The following illustrations show the buttons, slots and ports on the C5v/F5v Tablet PC.
Chapter 1 Getting Started
Overview of the C5v/F5v 3
Front
function button
Dashboard button
directional pad
battery gauge
B button
A button
microphones
web camera
touchscreen display
(F5v only)
docking connector
Function button
Activate secondary functions for other buttons.
Dashboard button
Open Motion Dashboard.
Directional pad
Use for basic navigation. Equivalent to the arrow keys on a
keyboard. The center button is equivalent to Enter.
A button
Set up a custom action.
B button
Set up a custom action.
Battery gauge
Show battery status.
Microphones
Record sounds and use for speech recognition.
Web camera (optional)
Interact over the web.
Touchscreen display
Use your finger or pen to navigate the tablet. (F5v option)
Docking connector
Interact over the web.
4 Chapter 1 Getting Started
Overview of the C5v/F5v
Right side
power
button
Windows security
button
power adapter
port, USB port (F5v),
and cover
RFID antenna
area
camera
button
fingerprint
reader
barcode scanner
Power adapter
port, USB port (F5v
only), and cover
Connect the power adapter.
RFID (optional)
antenna area
Scan area for reading RFID tags.
Camera (optional)
button
Use to trigger the built-in documentation camera.
Windows Security
button
Use to log on to or lock the tablet. Equivalent to
Ctrl+Alt+Del on a keyboard.
Fingerprint reader
Scan your fingerprints for added security. You can also
use the fingerprint reader as a navigation device.
Power button
Turns the tablet on and off.
Barcode scanner
(optional)
Reads codes from barcode labels.
Top side
RFID button
RFID status
light
Chapter 1 Getting Started
barcode
scanner button
fan cover
RFID (optional)
status light
Shows the status of the RFID reader.
RFID reader
(optional) button
Use to trigger the RFID reader.
Barcode scanner
(optional) button
Use to trigger the barcode scanner.
Fan cover
Protects the fan assembly.
Overview of the C5v/F5v 5
Back
pen tether
fan cover
pen holder
camera light
speaker
camera lens
battery
Battery latch
Hot-swap logo
Docking guide
Smart card reader
Pen tether
Attach the pen tether.
Pen holder
Store the pen when not in use.
Fan cover
Protects the fan assembly.
Camera (optional) lens
Capture images to the hard disk drive.
Camera (optional) light
Provides light for the documentation camera.
Speaker
Listen to audio.
Battery
Powers the tablet when it is not plugged in or docked.
Note: The Microsoft® Windows® Certificate of Authenticity is located
under the battery.
6 Chapter 1 Getting Started
Overview of the C5v/F5v
Battery latch
Opens the battery compartment’s door.
Hot-swap logo
Indicates that you can hot swap the battery.
Docking guide
Aligns the unit with the Docking Station.
Smart card reader (optional)
Reads and writes information on a smart card.
Pen
F5v supports touch with a pen as well as your finger. You may find the pen handy when you
want to write a quick email or take notes. The pen is particularly effective for precise data
entry and navigation.
The pen includes a pressure-sensitive tip, a function button, and an eraser. The pen contains
no batteries and requires no external power.
eraser
function button
Tip
tip
C5v/F5v pen
You can purchase pens from the Motion Computing Accessories page. For more
information on using the pen, see “Using touch” on page 21.
Where to begin with your C5v/F5v
Here are some steps you can follow to power up and get familiar with your C5v/F5v Tablet
PC.
Step 1: Power up the tablet
1. Pull out the port door located at the bottom of the right side of the C5v/F5v to expose
the AC adapter port and plug in the AC adapter.
2. Plug the power cord into an outlet.
• The battery gauge turns amber to indicate that the battery is charging.
• Keep the tablet on AC power until the battery is fully charged.
Chapter 1 Getting Started
Where to begin with your C5v/F5v 7
Plug in the C5v/F5v
3. Press and release the power button
turn it on.
located on the top right side of the C5v/F5v to
4. Follow the on-screen instructions to set up your user account and install Windows 7.
Step 2: Connect to a wireless network
The C5v/F5v comes with built-in Wi-Fi and Bluetooth. Your tablet PC may also be equipped
with mobile broadband for accessing the Internet.
To set up available wireless networks:
• Enable wireless from the Motion Dashboard
• Set up Wi-Fi
• Set up mobile broadband with GPS
• Set up Bluetooth
8 Chapter 1 Getting Started
Where to begin with your C5v/F5v
Enable wireless from the Motion Dashboard
The first task when setting up wireless is to enable the wireless network adapters from the
Motion Dashboard. The Dashboard is a Motion Computing application for configuring your
C5v/F5v Tablet PC.
Chapter 1 Getting Started
Where to begin with your C5v/F5v 9
To enable wireless adapters
1. Open the Motion Dashboard. From the Windows task bar, tap the Motion Dashboard
icon
2. Tap Wireless.
3. Tap the check boxes next to all wireless networks you intend to use:
• Enable Bluetooth Internal Wireless
• Enable 802.11 Internal Wireless
• Enable Mobile Broadband with GPS (If this option is not listed, your C5v/F5v does
not have mobile broadband capabilities.)
NOTE: To extend battery life, enable only the wireless devices that you will be using.
Set up Wi-Fi
Connect to the Internet and other computers wirelessly over Wi-Fi.
To set up Wi-Fi
1. Enable Wi-Fi from the Motion Dashboard.
2. From the notification area, tap the wireless network icon
3. Tap the desired wireless network from the list of available networks.
Set up mobile broadband with GPS
If you purchased your C5v/F5v with the optional mobile broadband module, you can
connect to high-speed cellular networks worldwide. With the mobile broadband module
and a data plan from one of several cellular network providers, you have full Internet access.
To set up mobile broadband
1. Enable mobile broadband from the Motion Dashboard.
2. Start the Motion Connection Manager. From the Start menu, select All Programs >
Motion Computing > Motion CM.
3. Tap the help icon
and select the help topic, Setting up mobile broadband.
4. Follow the instructions to set up a network profile and connect to the mobile broadband
network.
NOTE: Before you can connect to a mobile broadband network, you must have an active account
with a cellular network provider. Some providers require a SIM card for mobile broadband
access; if you are not sure whether you need one, contact your mobile broadband provider.
10 Chapter 1 Getting Started
Where to begin with your C5v/F5v
Set up Bluetooth
The C5v/F5v has a built-in Bluetooth adapter which provides short-range wireless
connectivity with other Bluetooth enabled devices.
To set up Bluetooth
1. Enable Bluetooth from the Motion Dashboard.
2. Add a Bluetooth device:
a. From the notification area, tap the Bluetooth icon
and select Add a Device.
b. Make sure the device is discoverable according to Bluetooth device manufacturer’s
instructions. When a Bluetooth device is discoverable, it is visible to other Bluetooth
devices within range.
c. Select the desired Bluetooth device from the list of available devices.
d. Follow the on-screen instructions to complete the procedure.
3. Make the C5v/F5v discoverable (visible) to other Bluetooth devices:
a. From the notification area, tap the Bluetooth icon
and select Open settings.
b. On the Options tab, select Allow Bluetooth devices to find this computer.
Step 3: Get familiar with your C5v/F5v Tablet PC
Once you’ve set up your C5v/F5v, take a few minutes to get familiar with your tablet PC.
• Calibrate touch. If you have a F5v with a touchscreen display, you should adjust the
touch settings for you by calibrating the digitizer. For details, see “Calibrate touch” on
page 22.
• Use Motion Computing tools to customize your tablet according to your work style. See
“Using the Motion Dashboard” on page 18.
• Open the writing pad and provide handwriting samples to improve handwriting
recognition. See “Entering text and handwriting recognition” on page 27.
• Take photos or use the web camera. See “Using the cameras (optional)” on page 38.
• Set up speech recognition. See “Using speech recognition” on page 37.
Step 4: When you take a break
When you go away from your tablet PC for a while, you can lock it to avoid others from
accessing it by pressing the Security button and put it in sleep or hibernate mode to save
power by pressing the Power button.
Chapter 1 Getting Started
Where to begin with your C5v/F5v 11
Security and Power Buttons
Lock and unlock the tablet PC
To lock the tablet PC, either
• Press and the security button
on the right side of the tablet.
• If a keyboard is attached, enter Ctrl+Alt+Delete.
To unlock the tablet
• Press the security button
or Ctrl+Alt+Delete again.
Sleep mode
Place your tablet in sleep mode when you go away for a short period of time. Sleep mode
conserves battery power while you are away and when you return, your desktop is the same
as you left it. Sleep is sometimes called “stand-by.”
To put the tablet in sleep mode
• Save your files.
• Press and release the power button
12 Chapter 1 Getting Started
Where to begin with your C5v/F5v
Note: While in sleep mode, the power button flashes green.
To wake up the tablet from sleep mode
• Press and release the power button
The tablet quickly resumes activity and your desktop is the same as you left it.
Hibernate mode
If you intend to leave your tablet for several hours or more, you can put the tablet in
hibernate mode. Like sleep, when you return from hibernate, your desktop is the same as
you left it.
It takes longer to start up from hibernate mode than sleep, but it consumes very little
power, saves data to disk beforehand, and is still faster than starting your tablet after
shutting it down.
To put the tablet in hibernate mode
• From the Start menu, tap the arrow next to Shut down and select Hibernate.
hibernate
Hibernate from the Start menu
For more information on power options, see “Changing how the power button functions”
on page 49.
Optional setup tasks
Here are some other tasks you may want to do when you start out with your C5v/F5v.
Create a recovery image
Once you have set up your C5v/F5v the way you like it, including installing your
applications, create a system image on an external USB drive. This is a safety measure in the
unfortunate event that your system stops working.
A system image is an exact copy of a drive and includes Windows 7, your system settings,
programs, and files. For more information, see “Creating a system image” on page 58.
Chapter 1 Getting Started
Optional setup tasks 13
Attach the pen tether
The C5v/F5v pen comes with a tether so that you can attach the pen to your tablet or
docking station to avoid misplacing it. The tether is essentially a string with loops at each
end.
To attach the pen tether
1. Slip one end of the tether through the hole at the end of the pen, then pull the pen
through the loop until it is tight.
2. Slip the other end of the tether through the attach point on the C5v/F5v then pull the
pen through the loop until it is tight.
You can purchase pens from the Motion Computing Accessories page.
Connect the tablet to a docking station
The C5v/F5v docking station is a separate accessory that you can purchase from the Motion
Computing Accessories page.
The C5v/F5v docking station adds functionality to your tablet, including port expansion for
Ethernet, VGA monitors, and USB devices such as printers, keyboards, and mice. The
docking station also charges the tablet and includes a charging bay for an extra battery. For
details on installing and using the docking station, see the CFT-Series Docking Station User’s
Guide which accompanies the docking station.
Connect the tablet to a display monitor
Connect a display monitor to your C5v/F5v Tablet PC using the VGA port located on the
CFT-Series docking station.
After connecting the monitor, set up the external display from the Motion Dashboard as
described in “Setting up an external display” on page 33.
For more information
This User’s Guide introduces the full set of C5v/F5v features and provides instructions for
common tasks you’ll perform. The rest of this book is organized as follows:
• Chapter 2 Using your C5v/F5v—Provides instructions for basic C5v/F5v tasks including
how to customize your tablet to fit the way you work using Motion Dashboard, how to
use the cameras, how to set up speech recognition and more.
• Chapter 3 Caring for your C5v/F5v—Provides suggestions for keeping your tablet in
great shape.
• Chapter 4 Troubleshooting and FAQs—Provides answers to common issues you may
encounter as you begin to use your C5v/F5v. Also includes FAQs.
14 Chapter 1 Getting Started
For more information
The Getting Started document located on the desktop provides a number of tips to get you
started using the tablet quickly.
You will find other useful information on our website:
• Tablet PC Tips & Tricks
• Motion Computing Support
• Free online training videos
• Knowledge Base
•
Motion Computing Accessories
• Motion Computing Store
NOTE: This guide is available in French, German, Spanish and Portuguese from the web site.
Chapter 1 Getting Started
For more information 15
16 Chapter 1 Getting Started
For more information
2
Using your C5v/F5v
This chapter provides information about performing common tablet tasks such as
customizing touch and changing tablet settings.
Introducing the C5v/F5v desktop and applications
When you start up the C5v/F5v for the first time, the desktop looks like the following
picture where Motion Computing applications appear in the taskbar and notification area.
Getting Started
document
taskbar
notification area
Motion Computing desktop
Chapter 2 Using your C5v/F5v
17
The Motion Computing applications are described below.
Motion Getting
Started
Document that contains tips for starting out with the
C5v/F5v Tablet PC.
Motion Dashboard
Motion application for changing tablet settings. See
“Using the Motion Dashboard” on page 18.
Changing the taskbar
You may find it convenient to place the Windows taskbar on the left edge of the display,
especially if your tablet PC has a touchscreen display.
To place the taskbar on the left edge of the screen
1. Press and hold the Start menu icon and tap Properties.
2. Tap the Taskbar tab.
3. Make sure that Lock the taskbar is checked.
4. Under Taskbar location on screen, select Left.
5. Tap OK.
TIP:
As an option, you can hide the taskbar altogether; it reappears when you tap the area. From
the Taskbar tab, tap the Auto-hide the task bar check box.
Using the Motion Dashboard
The Motion Dashboard provides a convenient way to change common tablet-related
settings.
To open Motion Dashboard
• From the Windows task bar, tap the Motion Dashboard icon
18 Chapter 2 Using your C5v/F5v
Using the Motion Dashboard
Motion Dashboard is organized into categories, which are listed on the left of the
Dashboard. Tap a category to display its settings. In this illustration, Motion Dashboard is
open to Display settings.
Motion Dashboard
The following table lists some of the tasks you can perform using the Motion Dashboard.
NOTE: This is a partial list of tasks that you can perform with Motion Dashboard.
Some of these tasks are described in this chapter; all tasks are described in
Motion Dashboard by tapping the help icon
Chapter 2 Using your C5v/F5v
Using the Motion Dashboard 19
Dashboard Category
Task
Display
•
•
•
•
•
Rotate the display orientation
Adjust the brightness of the display
Set advanced graphic properties
Set up an external display
Dim the display automatically
Audio
•
•
•
•
Adjust speaker and microphone volume
Adjust advanced audio settings
Suppress background noise
Balance speakers
Pen & Tablet
• Configure touch to use touch only, pen only or both
simultaneously
• Adjust touch to left-handed setting
• Adjust sensitivity to flicks and gestures
• Use the pen function button for erasing digital ink instead
of performing the right-click action
• Personalize your handwriting so that it can be recognized
more accurately
Wireless
• Enable and disable Bluetooth, 802.11 Wi-Fi, and mobile
broadband
• Choose to have wireless disabled on Start Up (it is enabled
by default)
• Adjust 802.11 Wi-Fi and Bluetooth properties
Power
• Select a power plan
• Change what the power button does when pressed: sleep,
hibernate or shut down
Security
• Set up the fingerprint reader and other security options
Accessing Motion tools from Windows notification area
For convenience, you can access common Motion tools from the Windows notification area.
NOTE: Initially, the Motion icons do not appear in the notification area. Tap the arrow to view more
icons. Tap Customize to have the icons appear in the notification area.
arrow
wireless
indicator
Motion utilities
power
indicator
Motion icons in the notification area
20 Chapter 2 Using your C5v/F5v
Accessing Motion tools from Windows notification area
Tap the Motion icon
to display:
• Battery Health—Shows the current battery charge level.
• Motion Dashboard—Opens the Motion Dashboard.
• Options—Lists options you can set:
– Show Hard Drive Activity—When selected, the Motion icon blinks when there is
hard drive activity.
– Automatic Display Rotation—When selected, the C5v/F5v automatically changes
the viewing orientation (landscape to portrait or vice versa) when the tablet is
physically rotated.
Using touch
With the F5v, you can use either your finger, a pen or both to interact with the touchscreen
display. With the C5v, you can use the pen to interact with the display (the C5v does not
have a touchscreen display). While it’s convenient to use your finger most of the time, a pen
allows you more precise control for editing a document or drawing graphics among other
things.
NOTE: The touchscreen display is available as an option for the F5v Tablet PC.
With touchscreen displays, you use your finger or pen as you would use a mouse. For
example, tapping twice is the same as double-clicking a mouse. Tap and holding is the
same as right-clicking a mouse to open context-sensitive menus.
Here are some common ways to perform tasks on a touchscreen:
• Tap—Select something
• Press and hold—Open a menu of options. This is equivalent to right-clicking a mouse to
display the right-click menu.
Note: Press and hold your finger until a circle appears then lift your finger to display the
menu.
• Double-tap—Perform a double-click action
• Tap and drag—Drag and drop
• Pinch fingers together—Zoom in
• Spread fingers apart—Zoom out
• Flick—Scroll through a list or move quickly
• Press and hold the pen’s function button (equivalent to a right-click on a mouse)—
Open a context-sensitive menu
NOTE: If the tablet does not respond when you tap with your finger, try using more area of your
fingertip. Unlike other types of touchscreens, the F5v capacitive touchscreen does not
respond to other input. For example, you can’t tap it with another object such as a credit
card or when wearing gloves.
Chapter 2 Using your C5v/F5v
Using touch 21
Calibrate touch
The digitizer is software detects the position of the pen or your finger on the display. You
should calibrate the digitizer the first time you start the Tablet PC. Then recalibrate the
digitizer whenever the pointer does not align with the pen tip or finger.
Note: Touch is an optional feature for the F5v.
To calibrate the digitizer
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Under Pen & Tablet, tap Calibrate Digitizer.
4. Tap your finger on the display to calibrate for touch.
5. Follow the instructions in the calibration program.
6. Repeat the above steps, tapping the pen on the display to calibrate the pen.
22 Chapter 2 Using your C5v/F5v
Using touch
How multiple-touch works fingers for gestures
The F5v touchscreen display supports multi-touch which allows you to directly manipulate
items on-screen, such as to navigate websites and view photos. For example, you can use
your fingers to scroll through lists, zoom in and out, rotate, and so on.
Changing to one-tap open for touch
With touch, you may want to change how you select and open items. By default, Windows
folders are set up so that you tap once to select an item and double-tap to open it. For
touchscreen displays, you can change the behavior to point to select an item and open an
item with one tap instead of two.
To change folder options
1. From the Windows Control Panel, tap Appearance and Personalization, Folder
Options, then tap Specify single- or double-click to open.
2. Under Click items as follows, tap Single-click to open an item (point to select).
For more information, open Windows Help and search for “folder options.”
Configuring touch input mode
You can determine how touch input is configured by setting the input mode. You can use:
• Your finger only; no pen input is detected.
• The pen only; no finger input is detected.
• Both your finger and a pen.
• Switch between touch and pen input, in which case you double-tap to switch to touch
input. This is useful to avoid the tablet from responding to unintentional touch input.
To configure touch settings
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Touch Settings.
4. From the Digitizer Options tab, under Input Mode tap the desired mode.
Chapter 2 Using your C5v/F5v
Using touch 23
Adjusting touch settings
You can adjust how your finger movements are interpreted in many ways. For example, you
can:
• Adjust how quickly the tablet responds when you double-tap your finger
• Adjust how quickly the tablet responds when you press and hold your finger
• Show the touch pointer when interacting with items on the screen
• Change the touch pointer location, which can be helpful if you are left-handed
•
Enable or disable multi-touch gestures and inkings
• Change the location of menus to appear to the right of your hand, which is helpful if you
are left-handed
To change touch settings
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Pen & Input Devices.
4. Tap the Touch tab.
5. To enable Touch, tap Use your finger as an input device.
6. To enable multi-touch gestures, tap Enable multi-touch gestures and inking.
7. To adjust the Double-tap action, under Touch action, tap Double-tap then tap
Settings. Move the slider to make your adjustments.
8. To adjust the Press and hold action, under Touch action, tap Press and hold then tap
Settings. Move the slider to make your adjustments.
9. To display the touch pointer on the screen, tap Show the touch pointer.
10.To change what the touch pointer looks like or where it’s positioned, tap Advanced
Options.
To change the location of menus for left-handed users
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Tablet PC Settings.
4. Tap the Other tab and tap Left-Handed.
24 Chapter 2 Using your C5v/F5v
Using touch
Adjusting pen settings
If the pen doesn’t respond as accurately as you would like, you can make adjustments. For
example, you can:
• Use the button on the pen to perform the right-click action or act as an eraser
• Adjust how quickly the tablet responds when you double-tap the pen
• Adjust how quickly the tablet responds when you press and hold the pen button
To change pen settings
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Pen & Input Devices.
4. Tap the Pen Options tab.
5. To adjust the speed and spacial tolerance of the Double-tap action, under Pen action,
tap Double-tap then tap Settings. Move the slider to make your adjustments.
6. To adjust the speed and duration of the Press and hold action, under Pen action, tap
Press and hold then tap Settings. Move the slider to make your adjustments.
7. To enable the function button on the pen, tap Use the pen button as a right-click
equivalent.
8. To enable the eraser, select the Use the top of the pen to erase ink option.
Adjusting tablet PC settings
From Tablet PC Settings, you can change from right-handed to left-handed use.
To change hand orientation
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Tablet PC Settings.
4. Tap the Other tab and make your desired change.
The Configure your pen and touch displays option on the Tablet PC Settings Display
tab is useful for assigning touch to the appropriate display when one or more displays are
connected to the tablet. By default, Windows 7 assumes that an external display is for touch
input. To change this, run Setup from Tablet PC Settings to assign touch to your tablet
display.
NOTE: A keyboard must be connected to the tablet to perform this procedure.
To assign touch to the desired display
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
Chapter 2 Using your C5v/F5v
Using touch 25
3. Tap Tablet PC Settings.
4. Tap the Display tab.
5. Tap Setup next to “Configure your pen and touch displays.”
6. Tap Touch Input.
7. Press the Enter key until you see the instructions appear on the display that you want to
use for touch input.
8. Follow the on-screen instructions.
9. Press Esc to end the process.
26 Chapter 2 Using your C5v/F5v
Using touch
Entering text and handwriting recognition
You can enter text by either tapping characters on an on-screen keyboard or writing on a
virtual writing pad. When you write on the writing pad, your handwriting converts to digital
ink. “Digital inking” refers to the process of converting your handwriting to text. In the
following picture of the writing pad, someone started writing Motion Computing and
“Motion” has already been converted into digital ink.
keyboard icon
writing pad icon
video demonstrations of writing tips
writing pad
Input panel open to the writing pad
TIP:
Tap the icons at the top of the input panel to view videos on making editing gestures. To
hide the video tips, tap the icon on the right.
By tapping the keyboard icon at the top of the pad, the input panel opens to the on-screen
keyboard.
Here’s the input panel open to the on-screen keyboard. Tap the Tools menu for more input
panel options and for viewing Help Topics.
tools
help
Input panel open to the on-screen keyboard
TIP:
Resize the keyboard panel by dragging the handle at the bottom right of the keyboard.
TIP:
Use the Ctrl, Alt, Fn, Del and Bksp keys as you do on a normal keyboard.
Chapter 2 Using your C5v/F5v
Entering text and handwriting recognition 27
Opening and closing the input panel
The tablet PC input panel often opens automatically when you tap in a text field. You can
also tap the tab located on the left side of the screen to expand the input panel.
To open the input panel either
• Tap at the place you want to enter text, such as in a text box. Then tap the input panel
icon
• Tap the input panel tab on the left edge of the screen
To close the input panel
• Tap the close button
at the top-right. The input panel slides back to the edge of
the screen.
Docking or floating the input panel
By default, the input panel is floating and you can move it anywhere on the screen by
placing your finger or pen on the title bar and dragging it.
If you prefer, you can dock the input panel so that, when it is open, it always appears at the
same location, either at the top or bottom of the screen.
To dock or undock the input panel
• At the top of the input panel, tap Tools.
• Select Docking.
• Select either Dock at the top of the screen, Dock at the bottom of the screen or Float.
TIP:
If you're left-handed, you can move the input panel to the right edge of the screen to make
it easier to use.
Entering numbers with numbers pad
If you find yourself typing a lot of numbers, use the numbers pad.
To open the numbers pad
• Tap the Num key at the bottom of the writing pad.
Numbers pad
28 Chapter 2 Using your C5v/F5v
Entering text and handwriting recognition
Entering special keys with the extended keyboard
You can enter special keys using the on-screen expanded keyboard. Special keys include:
• Home, End, Insert keys
• Page up, Page down keys
• Print screen key
• Pause key
• Scroll lock key
To open the expanded keyboard
• Tap the Tools key at the top of the input panel and choose Show Expanded Keyboard.
special keys
tools
Expanded keyboard
Using the handwriting recognition program
The more you write, the quicker your handwriting is recognized because the tablet has an
automatic learning tool that collects data about the words you use and how you write
them. This data is stored under your user profile.
As a option, you can use the handwriting recognition application to train the tablet to
recognize your handwriting style. You supply handwriting samples when prompted.
To start the handwriting recognition program
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Pen & Input Devices.
4. Tap Handwriting and follow the on-screen instructions.
TIP:
If you inherit your C5v/F5v from another user, you can reset automatic learning.
To reset handwriting automatic learning
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
Chapter 2 Using your C5v/F5v
Entering text and handwriting recognition 29
3. Tap Pen & Input Devices.
4. Tap Handwriting.
5. Tap Don’t use automatic learning. The current handwriting profile is deleted.
6. Tap Use automatic learning to begin collecting handwriting data again.
NOTE: You can find other handwriting applications at the Motion Computing Store.
Using front panel buttons
You can use the buttons on the front of the unit to perform many functions without having
to use the pen. The buttons are customizable, so you can modify their functions to suit the
way you work as described next.
function
Dashboard
directional pad
A button
Button
Primary
Enter
B button
Secondary
(Function+button)
Function
Activates secondary function for
other buttons
N/A
Dashboard
Starts Motion Dashboard
Opens Windows Journal™
30 Chapter 2 Using your C5v/F5v
Using front panel buttons
Button
Secondary
(Function+button)
Primary
Directional
pad
Moves the pointer or navigates
through documents. Equivalent to
arrow keys on a keyboard.
Left = Shift+Tab
Right = Tab
Up = Page Up
Down = Page Down
Enter
Makes a selection—equivalent to
the Enter key
Windows logo key
Performs application-specific
function
Rotates the display orientation
Activates the tablet scanner (if
installed)
Cancels the current task—
equivalent to the Esc key
The directional pad orientation rotates to match the display orientation. To move the
pointer in a certain direction, press that direction on the pad regardless of orientation. For
example, “up” in landscape orientation becomes “left” in portrait orientation.
Configuring front panel buttons
As you become more familiar with your tablet, you can customize the buttons on the front
panel. You can configure the buttons to start your favorite program, run a command, or
enter a key combination.
function
Dashboard
directional pad
A button
Enter
B button
To configure the front panel buttons
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
Chapter 2 Using your C5v/F5v
Using front panel buttons 31
3. Tap the Tablet PC Settings button.
4. In the Tablet PC Settings window, tap the Buttons tab.
5. Select the button combination you want to change. The currently selected buttons
appear in red.
6. Tap Change.
7. Select the appropriate action for the button.
For some actions, you must enter more information, such as the location of a program to
start. You can select an action for Press and another for Press and hold. For more
information, tap What is press and hold?
NOTE: To reset the buttons to their default values, tap the Reset button.
Setting display options
Use the procedures in this section to customize your display settings. You can adjust the
brightness level, rotate the display and change the order in which the display rotates.
Adjusting the display brightness
You can change the brightness of the display which is useful for conserving battery power.
To adjust the display brightness
1. Open Motion Dashboard.
2. Tap Display.
3. Move the Brightness slider to the desired level.
TIP:
For optimal battery conservation and viewability, set the brightness scale to the mid-point
or slightly above.
4. Select one of the following:
• Fixed—Sets the display brightness to a constant level. Move the slider to adjust the
display to the desired brightness level. When set to Fixed, the ambient light sensor is
ignored.
• Dynamic—Uses the ambient light sensor to maintain an appropriate brightness level
for the current lighting condition. The Dynamic setting helps to conserve battery
power.
32 Chapter 2 Using your C5v/F5v
Setting display options
Rotating the display orientation
You can easily change the screen orientation to fit your current task. For example, you may
want to use the portrait orientation for filling out forms or reading an e-book. At other
times, you may want a landscape orientation for web browsing or sketching.
To rotate the display
1. Open Motion Dashboard.
2. Tap Display.
3. Tap the Rotate Screen button.
Enabling or disabling automatic rotation
You can set the display to automatically rotate when you physically rotate the tablet. By
default, automatic rotation is disabled.
To enable or disable rotating the display automatically
1. From Windows notification area, tap Options.
2. Select or clear the Automatic Display Rotation check mark.
Setting up an external display
You can use your tablet with an external monitor or projector.
Display settings
When connecting to an external display, specify whether to:
• Duplicate (mirror) the displays
• Extend the tablet’s display to span across the external monitor
• Use the external monitor only or use the tablet only
Mirror display
The “mirror display” theme duplicates the tablet display on both the display and monitor.
This is useful when using your Tablet PC with a projector.
Chapter 2 Using your C5v/F5v
Setting display options 33
external monitor
tablet PC
mirror display
Extended with monitor primary
The “extended with monitor primary” display theme expands the desktop area across the
tablet and external monitor, where the external monitor as the primary monitor. You can set
the external monitor to use a different display resolution than the tablet PC.
tablet PC
external monitor
extended with monitor primary
Extended with tablet primary
The “extended with tablet primary” display theme expands the desktop area across the
tablet and external monitor, with the tablet is primary display. You can set the external
monitor to use a different display resolution than the tablet.
Monitor only
The “monitor only” display theme uses the external monitor only.
Tablet only
The “tablet only” display theme uses the tablet display only.
34 Chapter 2 Using your C5v/F5v
Setting display options
Connect an external monitor
To connect an external monitor to the C5v/F5v, you can use the C5v/F5v docking station,
sold separately.
To set up an external monitor
1. Connect the monitor cable from the external monitor into the C5v/F5v docking station
according to the CFT-Series Docking Station User’s Guide.
2. Plug in the external monitor and turn it on.
3. If necessary, install software and drivers for the monitor. See the manufacturer’s
documentation for more information.
4. Open Motion Dashboard.
5. Tap Display.
6. Select a Display Scheme.
7. If your tablet PC does not respond to touch, follow the steps below to enable touch on
the correct display.
Resetting touch after adding other monitors
After setting up an external monitor, touch might be disabled on your tablet because
Windows 7 assumes that the external display is for touch input. You can enable touch on
the correct display from the Motion Dashboard by following the procedure below. You’ll
need a keyboard.
To enable touch when your tablet is connected to an external display
1. If it isn’t already, attach a keyboard to the tablet.
2. Open Motion Dashboard.
3. Tap Pen & Tablet.
4. Tap Tablet PC Settings.
5. Select the Display tab.
6. Tap Setup next to “Configure your pen and touch displays.”
7. Tap Touch Input.
8. Press the Enter key until you see the instructions appear on the display that you want to
use for touch input.
9. Follow the on-screen instructions.
10.Press Esc to end the process.
Resetting the display after returning the tablet to the docking station
If you set up your tablet in a docking station with the display theme expanded across both,
and you remove the tablet temporarily from the docking station, the display theme may
need to be reset when you return the tablet to the docking station.
Chapter 2 Using your C5v/F5v
Setting display options 35
TIP:
If the display still doesn’t work properly, change the Display Scheme to Tablet Only and
then change it back to the desired scheme.
36 Chapter 2 Using your C5v/F5v
Setting display options
Using the built-in microphones
You can use the built-in array microphones to record audio, dictate notes, and use voice
commands. The two microphones are used at the same time to optimize sound detection
for speech recognition and voice recording.
You can use the Speak Anywhere acoustics software to fine tune the built-in microphones
to suit your environment. The software enables you to use the microphones in a variety of
settings, including small or large groups, noisy environments, or for individual dictation or
voice commands. The software improves the microphone reception by:
• Removing all sounds outside of the user-defined angle of acceptance.
• Minimizing background and ambient noise.
• Removing echo caused by the microphone picking up the speaker output (feedback).
Using speech recognition
You can use speech recognition to interact with your tablet by voice. You can dictate
documents and emails or use voice commands to control programs.
• Dictation mode—With Dictation mode, your tablet listens to everything you say and
converts your words to text. You can use dictation mode to enter text directly into any
document or text box.
• Voice command mode—With Voice command mode, your tablet listens for specific
words that correspond to a list of available voice commands. You can use commands to
switch between programs, save documents, copy, paste or undo.
Setting up speech recognition
Before you can use speech recognition, you must configure the microphones and train the
system for the characteristics of your voice. Then, you can take the available speech tutorial
to learn basic voice commands.
Set up the microphones
For best results, move to a quiet environment.
To set up the microphones
1. In Control Panel, tap the Ease of Access category, then tap Speech Recognition.
2. Tap Set up microphone.
3. If you are using the tablet’s microphone array, select Other.
4. Follow the instructions in the setup program.
5. If the microphones are set to an appropriate level, the meter will stay in the green zone
while you read the sentences. If the level is too low or too high, use Motion Dashboard to
adjust the level (page 18).
Chapter 2 Using your C5v/F5v
Using the built-in microphones 37
Train your tablet to recognize your speech
Use this procedure to improve your tablet’s ability to understand your voice.
To train your tablet to recognize your speech
1. In Control Panel, tap the Ease of Access category, then tap Speech Recognition.
2. Tap Train your tablet to better understand you.
3. Follow the instructions in the setup program.
Taking the speech tutorial
You can use the speech tutorial to learn basic commands and dictation. The tutorial takes
about 30 minutes to complete.
To take the speech tutorial
1. In Control Panel, tap the Ease of Access category, then tap Speech Recognition.
2. Tap Take Speech Tutorial.
3. Follow the instructions in the tutorial program.
Using dictation and voice commands
After you have set up speech recognition, you can open it from Control Panel.
To use Dictation and Voice Commands
1. In Control Panel, tap the Ease of Access category.
2. Under Speech Recognition, tap Start Speech Recognition.
3. Ensure that the Speech Recognition window is open and listening.
4. Do one of the following:
• For voice commands, say the appropriate command. For a list of commands, search
Windows Help and Support for “speech commands.”
• For dictation, open the program you want to use and start speaking.
For more information about speech recognition, search Windows Help and Support for
“speech recognition.”
Using the cameras (optional)
Your tablet may include built-in web and documentation cameras.
38 Chapter 2 Using your C5v/F5v
Using the cameras (optional)
Using the web camera
The web camera is a 1.3-megapixel camera that supports color images and streaming video.
It is located on the front of your tablet. You can use the web camera for interacting with
people online.
Use the software of your choosing to operate the web camera.
Using the documentation camera
You can use the built-in documentation camera to take pictures and save them to your hard
drive. The documentation camera is a 3-megapixel, auto-focus camera. The camera lens is
on the back of the tablet, and includes a light to illuminate the subject.
The camera can capture pictures in BMP, JPG, PNG, GIF, and TIFF formats, and it has a
maximum resolution of 2048 × 1536 pixels. By default, the camera captures pictures in BMP
format with a resolution of 1600 × 1200 pixels.
To use the documentation camera
1. Press the Camera button to activate the camera and open the viewfinder.
2. Press the Camera button again to take a picture. If you don’t take a picture after a few
seconds, the viewfinder closes automatically.
3. In the Pictures window, do one of the following:
• To delete the picture, tap Delete. In the confirmation dialog box, tap Yes.
• To copy the picture, tap Copy to Clipboard. You can then paste the picture into an
image editing program.
• To close the Pictures window, tap Close.
• To save the picture, tap Save. In the Save As dialog box, specify a location and a file
format, such as BMP, JPG, or GIF.
Chapter 2 Using your C5v/F5v
Using the cameras (optional) 39
Documentation camera tips
• Hold the camera steady and allow it to focus.
• If your pen is tethered, ensure that the tether is not in front of the camera lens.
• Ensure you have adequate lighting.
• You can use the Pictures window to take and review multiple pictures. Use the slider bar
at the bottom of the Pictures window to switch among active pictures.
Using the barcode scanner (optional)
Your C5v/F5v is available with an optional integrated 1D and 2D barcode scanner that you
can use to retrieve information from barcodes.
A barcode is a series of shapes on a contrasting background that can be optically read by a
barcode scanner. Many applications use barcodes for asset tracking, identification and
process controls.
Supported barcode types
The C5v/F5v barcode scanner supports several different types of barcodes—a minimum set
of barcodes is enabled at the factory.
The following symbologies are enabled by default:
• Aztec Code
• Code 128
• EAN-128
• EAN-UCC-CC-AB
• Code 39
• DataMatrix
• UPC-A
• UPC-E
• EAN-8
• EAN-13
• Interleaved 2 of 5
• PDF417
• Micro PDF417
• RSS-14
• RSS Limited
Other barcode types can be enabled by using the MCA Configuration Editor that comes
with the tablet PC. To access the editor, from the Start Menu, select All Programs > Intel >
MCA Platform Driver and tap MCA Configuration Editor.
To use the barcode scanner
1. Open the application that you want to receive the barcode data and place the insertion
point in the appropriate field.
2. Hold the unit by the handle with the scanner lens in front of you.
40 Chapter 2 Using your C5v/F5v
Using the barcode scanner (optional)
3. Aim the scanner lens at the barcode.
4. Press and release the barcode scanner button on the top of the unit. Ensure that the scan
beam covers the entire barcode.
If the scan was successful, the data will appear in the application and you will hear a chime
sound as confirmation.
Barcode scanner tips
• You will typically get the best scans if the lens is six to seven inches from the barcode.
• If you are having trouble scanning a barcode, use two hands to steady the tablet while
you scan.
Using the RFID reader (optional)
Your tablet PC may include an integrated 13.56 MHz RFID (Radio Frequency Identification)
reader that you can use to retrieve information from RFID tags.
Chapter 2 Using your C5v/F5v
Using the RFID reader (optional) 41
RFID tags use radio frequency (RF) transmissions to identify a product, animal, or person.
RFID does not require direct contact or line-of-sight scanning, and can be scanned through
many materials, including clothing. An RFID tag can store much more data than a typical
barcode, and some RFID tags can both transmit and record data. RFID can be used for asset
tracking, identification, process control, healthcare, and pharmaceutical applications.
The RFID reader supports the following formats:
• ISO/IEC 14443A/B
• ISO/IEC 15693
• ISO/IEC 18000-3
• MIFARE Classic (available on the F5v Tablet PC with a touchscreen display)
To use the RFID reader
1. Hold the unit by the handle with the right edge in front of you.
2. Aim the right edge of the unit at the RFID tag. Ensure that the tag is 1–1.5 inches (25–40
mm) from the RFID antenna scan area.
RFID tag
1 – 1.5 inches
42 Chapter 2 Using your C5v/F5v
Using the RFID reader (optional)
3. Press and release the RFID button on the top of the unit. The RFID light will come on to
indicate that the unit is scanning.
The RFID light goes off and the unit beeps to indicate a successful scan. The ASCII and Hex
data appears in the RFID Tag Data window.
NOTE: RFID tags are typically used with specialized applications. See your system administrator for
more information.
Using the battery
The C5v/F5v includes a high-capacity Lithium-ion battery that fits in to the back of the unit.
Under normal conditions, you can run the tablet on battery power for up to four hours.
DANGER: To avoid personal injury, handle the battery with care. Do not open, puncture,
short, or expose it to fire or water. Keep the battery in an environment with ambient
temperature of less than 104°F (40°C). For example, do not leave the battery in a closed car
in hot weather for an extended time. For more information, see the Safety and Regulatory
Guide packaged with the tablet.
Checking tablet battery power
You can check the remaining battery power several ways:
•
When the tablet is plugged in to an outlet, the battery gauge shows whether the battery
is fully charged (green) or charging (amber).
• When the tablet is running on battery, pressing the battery gauge button on the front
displays status lights indicating the current level of charge.
• From the Motion Dashboard.
• From the Windows notification area.
Chapter 2 Using your C5v/F5v
Using the battery 43
The battery gauge is located on the front of the C5v/F5v Tablet PC as shown:
You can use the battery gauge on the front of the unit to monitor the status of the battery.
To check the remaining battery power while running on the battery
1. Press the battery gauge on the front of the tablet.
2. Count the number of battery gauge lights. Each light represents about 20 percent
increments of a full charge.
When the tablet is on battery power, the lights indicate:
• Four green lights: The battery is three-fourths to fully charged.
• Three green lights: The battery is one-half to three-fourths charged.
• Two green lights: The battery is one-fourth to one-half charged.
• One green light: The battery is one-fourth charged.
• Flashing amber light: The battery is low and requires an immediate charge.
When the tablet is on AC power, the lights indicate:
• One amber light: The battery is less than one-fourth charged.
• Two amber lights: The battery is one-fourth to one-half charged.
• Three amber lights: The battery is one-half to three-fourths charged.
• Four amber lights: The battery is three-fourths charged.
• Four green lights: The battery is fully charged.
To check the remaining battery power from the Motion Dashboard
1. Open Motion Dashboard.
44 Chapter 2 Using your C5v/F5v
Using the battery
2. Tap Power which displays the percentage of remaining battery charge.
To check the remaining battery power from the notification area
• Tap the power indicator, which appears differently depending on whether the tablet is
plugged in.
– If the tablet is plugged in, tap the plug icon
– If the tablet is on battery power, tap the battery icon
Chapter 2 Using your C5v/F5v
Using the battery 45
Removing and replacing the battery
Before you remove the battery, ensure that the tablet is plugged in, turned off, or in
Hibernate (page 13) or Sleep mode (page 12). If you are hot-swapping the battery
(page 47), you can do so while the tablet is on and running on battery power.
To remove the battery
1. With the back of the unit facing you, slide and hold the battery latch.
2. Insert your finger under the finger grip and remove the battery from the battery
compartment.
To replace the battery
1. Place the tabbed end of the battery into the battery compartment.
2. Press the battery down until it locks in to place.
46 Chapter 2 Using your C5v/F5v
Using the battery
Hot swapping the battery
Changing a tablet battery while the tablet is in use and running on battery power is called
“hot swapping.” You can hot swap a battery only if you have a second charged battery to
replace the battery that is low on power.
While hot swapping the battery, you will notice the following behaviors:
• The tablet’s display gets dimmer. Once the charged battery is in the tablet, the tablet’s
display brightens again.
• The battery gauge’s LED lights turn off. Once the charged battery is in the tablet, the LED
lights turn on again.
• The power button is disabled. (The power button is disabled at any time the tablet has
no battery and is not running on AC power through the power adapter.)
Important: You have one minute to hot swap the battery. If you do not insert a charged
battery within one minute, the tablet goes into hibernate mode. If the tablet is in sleep
mode and you do not insert a battery within one minute, the tablet wakes up, then goes
into hibernate mode.
To hot swap the battery
1. Remove the battery (page 46).
2. Insert the new battery (page 46).
Important: Use only Motion Computing C5v/F5vbatteries with the tablet.
Long-term battery storage
Do not store any batteries with a full charge; this can cause a permanent loss of charging
capacity. For long-term storage, ensure that the charge level is between 20% and 40% (two
contiguous LEDs illuminated), and remove the battery from the tablet. Check stored
batteries every 90 days to determine the charge status. If only one LED or no LED is
illuminated, recharge the batteries to a level between 20% and 40%.
For optimum care, store the battery in a cool, dry environment. Never expose the battery to
temperatures above 60ºC (140ºF).
NOTE: In storage, the batteries will self-discharge at a rate of 10% of the total capacity per month.
Disposing of used batteries
A Lithium-ion (Li-ion) battery should be disposed of at a hazardous materials recycling
center when it is no longer serviceable. Do not throw it in a waste receptacle because the
battery could be deposited in a landfill.
Chapter 2 Using your C5v/F5v
Using the battery 47
Battery and power management tips
• To lengthen the battery’s usable life, use AC power when you can. The battery charges
automatically when the tablet runs on AC power.
• For optimal battery life, use AC power when using a USB device such as a DVD player or
external hard disk drive.
• When running on battery power, place the tablet in hibernate or sleep mode if you are
going to leave it unattended for more than a few minutes. For more information on
hibernate and sleep mode, see “Changing how the power button functions” on page 49.
• Remember that the display, processor, wireless cards and accessories all draw on the
battery, so adjust properties and disable unused accessories while running on battery
power.
• Condition your battery once a month. To condition it, run the tablet on battery power
until the battery’s charge level drops below 20 percent.
• When running on battery power, adjust the display to a dimmer setting and enable
Dynamic. Open Motion Dashboard, tap the Display tab and tap Dynamic.
• Turn off wireless devices when they are not being used. Open Motion Dashboard, tap
the Wireless tab, and clear the check box next to the wireless device you want to disable.
Changing the power plan
By default, the C5v/F5v uses the Motion Optimized power plan which is designed
specifically for Motion Computing tablets. It balances the need to save power while
maximizing tablet performance. When the tablet senses no current activity, it goes into
Power Saver mode automatically.
If necessary, you can change the Motion Optimized power plan from the Motion
Dashboard.
To change the power plan
1. Open Motion Dashboard.
2. Tap Power.
3. Tap Power Options.
4. Select a power plan from the list of available plans.
NOTE: Setting the power plan to Power Saver reduces the tablet’s performance.
48 Chapter 2 Using your C5v/F5v
Using the battery
Changing how the power button functions
When you press and release the power button it can go into one of the following modes:
• Sleep—The tablet pauses all activity immediately and quickly resumes when awakened.
This saves power when you are away from your tablet for a short time. However, you will
lose unsaved data if there’s a power failure.
• Hibernate—The tablet saves the contents of memory to the solid state drive and shuts
down. Pressing the power button restores the desktop exactly as you left it. Hibernate
consumes about as much power as a night light and takes less time to restart than the
Shut down option.
• Shut down—Tablet shuts down. Pressing the power button reboots the tablet.
By default, the tablet goes to sleep when you press and release the power button
. To
wake up your tablet, simply press and release the power button again. You can put the
tablet in hibernate mode or shut it down completely from the Start menu.
You can change how the power button behaves when it is pressed to either hibernate or
shut down or the tablet. You can set the behavior individually—depending on whether the
tablet is running on battery or plugged in.
To change what happens when the power button is pressed
1. Open Motion Dashboard.
2. Tap Power.
3. Under Power Switch on battery, select what you want to happen when the power
switch is pressed while the tablet is running on battery.
4. Under Power Switch plugged in, select what you want to happen when the power
switch is pressed while the tablet is plugged into an outlet.
Chapter 2 Using your C5v/F5v
Using the battery 49
Using the fingerprint reader
Using the fingerprint reader, you can log on to the tablet by scanning your fingerprint
instead of entering a password. This feature presents another level of security for the tablet.
scan fingerprint
fingerprint reader
With the fingerprint reader, you can avoid having to enter passwords for your applications
and websites. For example, instead of entering various passwords to your different website
accounts, you can use your fingerprint to serve as a master password that works for all your
accounts.
The steps to set up a fingerprint password include:
1. Start the Motion OmniPass™ application which you use to define and manage your
fingerprint .
2. Create an Omnipass user account (called enrolling the user). See page 52.
3. Replace passwords for sites by registering OmniPass credentials. After enrolling in
OmniPass, the next time you are prompted for your password you can replace the
password with your OmniPass credentials. See page 53.
4. Set up strong logon security. See page 53.
You can also protect sensitive data stored on your tablet. For details, see the OmniPass help.
Starting the OmniPass application
You use the OmniPass application with the fingerprint reader to create and manage your
fingerprints. After enrolling as an OmniPass user, you use OmniPass to secure files,
applications and websites by requiring a fingerprint swipe.
To start Motion OmniPass
• In the notification area, double-tap the Motion OmniPass icon ( ).
50 Chapter 2 Using your C5v/F5v
Using the fingerprint reader
When you start the application for the first time, the Motion OmniPass application looks like
this:
Motion OmniPass Initial Start Up
After you have enrolled as an OmniPass user, the application opens the OmniPass Control
Center which looks like this:
Chapter 2 Using your C5v/F5v
Using the fingerprint reader 51
Create an OmniPass user account
You create (enroll as) a new OmniPass user to register your fingerprint. Before you begin,
read the following tips.
Fingerprint reader tips
• For best results, use the Practice option before enrolling the first time.
• Be consistent. Hold your finger and scan at the same angle each time. For example, if you
enroll your finger with your hand open, hold your hand this way each time you scan.
• The scanner is bi-directional. You can move your finger from right to left or left to right.
• Read the prompts carefully and ensure that you wait for the prompt before you swipe.
• Swiping too fast or too slow can make a capture unsuccessful. Change the swipe speed
until you learn what speed works best.
• When scanning, press hard enough to fully contact both the nickel-colored ring and the
sensor; you do not have to press hard.
• Rub your fingers together to stimulate the natural skin oils so your fingerprint is easier to
detect. Conversely, wipe your finger off so nothing interferes with the scan.
• If you are having trouble enrolling a specific finger, enroll a different finger.
• If you are repeatedly having trouble getting a good scan, you may need to clean the
sensor. See “Cleaning the fingerprint reader” on page 66.
To enroll as a new OmniPass user
1. If you haven’t already done so, Start OmniPass.
2. Tap Enroll New User.
3. Follow the instructions in the setup program. When prompted:
1. Supply your Windows log in user name and password.
2. Select Authentec Fingerprint Device.
3. Choose which finger you want to use as your fingerprint password and swipe your
finger as instructed.
4. Enroll a second fingerprint which you can use if you injure your first finger.
Note: You can enroll another fingerprint at another time from the OmniPass Control
Center.
4. Back up your user profile to an external drive that you can store in a secure location in
the event that your user profile is corrupted.
52 Chapter 2 Using your C5v/F5v
Using the fingerprint reader
Replace your passwords
Once you have enrolled in OmniPass, you can use your OmniPass credentials instead of your
password to logon to your accounts that require passwords. This is called password
replacement. You set up password replacement the next time you are prompted for a
password. Instead of entering the password, you register your OmniPass credentials.
To register OmniPass credentials
1. When you encounter a user name and password prompt, enter your user name and
password, but do not log on. (Do not tap Enter, Submit, or OK.)
2. Right-click the OmniPass icon, and select Remember Password. The Windows arrow
pointer changes to the OmniPass golden key.
3. Click the key cursor on the window that has the password that you want OmniPass to
remember.
Note: For some applications, you may have to use the password wizard to register
passwords. If so, from OmniPass Control Center, tap Password Wizard and follow the
instructions.
4. At the Friendly Name prompt, enter a descriptive name to identify the site that you are
registering.
5. Check Automatically enter. This allows you instant access to the site without requiring a
fingerprint scan or password. OmniPass will automatically submit your user name and
password without prompting for verification.
Setting up strong logon security
For an additional level of security, you can enable strong logon security. Strong logon
security forces you to authenticate with a specific security device (such as the fingerprint
reader or a Smart Card) before allowing access to Windows.
Notes:
• After strong logon security is enabled, the Windows Welcome screen and Windows Fast
User Switching are disabled.
• After strong logon security is enabled, if the fingerprint reader or smart card reader fails,
you may not be able to log on to the computer.
To enable strong logon security
1. Start Motion OmniPass (page 50).
2. Tap Change Your OmniPass Settings.
3. Tap the Change System Settings tab.
4. Select the Enable strong logon security check box.
5. Tap Save all changes.
6. Tap OK and restart the computer.
Chapter 2 Using your C5v/F5v
Using the fingerprint reader 53
After you restart the computer, you should configure the authentication rules for strong
logon security.
To configure authentication rules
1. Start Motion OmniPass (page 50).
2. Tap Change Your OmniPass Settings.
3. Tap Set user authentication rules and policies.
4. Select the appropriate authentication rules.
5. Tap OK.
Using the smart card reader (optional)
Your tablet may include the optional smart card reader located on the back of the tablet
next to the battery. Using smart card software, this device reads information from the smart
card when the card is inserted into the reader.
The smart card is an ISO 7816 PC/SC compliant, contact type smart card reader/writer.
Depending on the smart card software you are using:
• You may receive an acknowledgement for when the smart card is fully engaged in the
reader.
• You may receive a prompt or be required to shut down the software before removing the
smart card.
• Some smart cards may require you to insert the smart card for authentication, and then
remove the smart card when authentication is completed.
• Some smart cards may require keeping the card in the reader while the smart card
software is running.
To insert the smart card
1. Place the smart card in front of the smart card reader with the metal contacts of the
embedded chip facing the back of the tablet.
2. Slide the smart card into the smart card reader until the card is firmly seated in the
reader.
To remove the smart card
1. Depending on your smart card software, you may be required to first shut down the
smart card software before removing the card. With this type of software, removing the
smart card while the tablet is running can result in logging off or shutting down the
tablet.
54 Chapter 2 Using your C5v/F5v
Using the smart card reader (optional)
2. Pull the card straight out of the reader.
smart card reader
smart card
Chapter 2 Using your C5v/F5v
Using the smart card reader (optional) 55
Using the SIM card slot
The SIM card slot holds one SIM (Subscriber Identity Module) card. A SIM card is a smart
card, about the size of a postage stamp, that stores information about your wireless
account.
You need to use a SIM card only if you are using mobile broadband on a GSM/UMTS/HSPA
network. Contact your service provider for details.
To insert a SIM card
1. Turn off the tablet and remove the battery (page 46).
2. Locate the SIM slot door and open it.
diagnostic port
SIM slot
Note: The SIM slot and a diagnostic port are behind the SIM slot door. The SIM slot is
below the diagnostic port.
3. Place the SIM card label side down on the battery tray. Ensure that the notch on the SIM
card is in the upper right corner.
4. Slide the SIM card into the SIM card slot until it clicks into place. You may need to use a
paper clip to push the SIM card all the way in.
To remove a SIM card
1. Turn off the tablet and remove the battery (page 46).
2. Open the SIM slot door.
3. Press the card in slightly until it pops out. You may need to use a paper clip to push the
SIM card in to release it.
56 Chapter 2 Using your C5v/F5v
Using the smart card reader (optional)
Using Windows Action Center
Windows Action Center provides a central location for you to manage the tablet’s security
settings and learn more about improving security. If a problem is detected (such as an outof-date antivirus application), the Action Center sends you an alert and provides
recommendations for how to remedy the situation.
To learn more, open Motion Dashboard to the Security panel, then tap Windows Action
Center.
Setting up user accounts
If you share the tablet with other users, you can set up a user account for each user. User
accounts control which files and programs users can access and what types of changes
users can make to the computer. A user account allows each person to have their own
settings.
If you have an administrator account, you can add new user accounts from the Microsoft
Management Console. For detailed instructions on setting up new users, open Windows
Help and search for “Create a user account.”
Chapter 2 Using your C5v/F5v
Using Windows Action Center 57
Backing up your system
To protect against loss or accidental deletion, schedule back ups to occur automatically on a
regular basis. Windows 7 has a back up tool that you can use to set up what you want to
backup and schedule backups on a regular basis.
To schedule back ups
1. From the Control Panel, tap System and Security category then tap Back up your
computer.
2. Tap Set up back up.
Follow the on-screen instructions.
You can restore files from a back up. For more information, open Windows Help and search
for “Restore files from a backup.”
Restoring your system
Windows 7 has specialized tools for restoring your system in case of system failure. This
section covers:
• Creating a system image to use to restore your computer if necessary
• Restoring the computer from a system image using Windows control panel
• Restoring the tablet from BIOS if Windows 7 cannot run
NOTE: System images are designed for restoring your entire system at once when you have a
serious problem with Windows 7. If you want to install particular files, folders or other data,
use Windows Backup.
Creating a system image
You can use a system image to restore the contents of your tablet if it ever stops working. A
system image is an exact copy of a drive and includes Windows 7, your system settings,
programs, and files. The system image requires an external drive, such as a USB flash drive,
on which to store the image.
NOTE: We recommend that you create a system image as soon as you set up your tablet and then
periodically.
To create a system image
1. Locate a USB flash drive or other external drive on which to store your system image.
2. From the Windows Control Panel, tap System and Security category, then tap Back up
your computer.
3. From the navigation bar on the left, tap Create a system image, then follow the
on-screen instructions.
58 Chapter 2 Using your C5v/F5v
Backing up your system
For complete instructions, open Windows Help and search for “Back up your programs,
system settings, and files.”
Restoring your system image from Windows Control Panel
Use the Recovery tool from the Control Panel to restore your system if you can still access
Windows 7 or if you are restoring your system image onto a different computer.
To restore your system from Windows Control Panel
1. Locate the external drive that contains your system image.
2. From the Windows Control Panel, tap System and Security category, then tap Backup
your computer.
3. Tap Recover your system settings or your computer, then Advanced Recovery
Methods, then Use a system image...
4. Follow the on-screen instructions.
For more information, open Windows Help and search for “Back up your programs, system
settings, and files.”
Chapter 2 Using your C5v/F5v
Restoring your system 59
Restoring your system image if you can’t start Windows 7
If you need to restore your system and cannot access Windows 7, you can access the
recovery tool from the BIOS screen.
NOTE: Before starting, locate the external drive that contains the system image you created
previously (page 58).
To restore your system image from the BIOS screen
1. Locate the USB flash drive or other external drive where you stored your system image.
2. If it isn’t already, attach a keyboard to the tablet.
3. Press the tablet’s power button
to start the tablet.
4. Press and hold the F8 key to display the BIOS screen.
You need to press the key as soon as the tablet starts up to access BIOS. If the Windows
logo appears, you need to try again by waiting until the Windows logon prompt
appears, and restarting your tablet from the Start menu.
5. On the Advanced Boot Options screen, select Repair your computer and press Enter.
6. Select a keyboard layout, then tap Next.
7. Select a user name and enter the password, then tap OK.
8. Attach the external drive that contains the system image.
9. On the System Recovery Options menu, tap System Image Recovery.
Follow the instructions to Re-image your computer.
Restoring your system without a system image
If you need to restore your Windows 7 system and you do not have a system image, you can
restore Windows to its original factory image. This does not restore any of your files or any
programs that you have installed.
To reinstall the original factory image
1. If it isn’t already, attach a keyboard to the tablet.
2. Press the tablet’s power button
to start the tablet.
3. Press and hold the F8 key to display the BIOS screen.
You need to press the key as soon as the tablet starts up to access BIOS. If the Windows
logo appears, you need to try again by waiting until the Windows logon prompt
appears, and restarting your tablet from the Start menu.
4. On the Advanced Boot Options screen, select Repair your computer and press Enter.
5. Select a keyboard layout, then tap Next.
6. Select a user name and enter the password, then tap OK.
60 Chapter 2 Using your C5v/F5v
Restoring your system
7. On the System Recovery Options menu, tap Reinstall Windows.
8. Tap Yes to reinstall Windows.
9. Check whether Windows was able to save any data from the tablet. Look in the folder
called Windows.old.
NOTE: If the Reinstall Windows option is not available, the tablet does not contain a recovery
partition. Use the recovery media that came with your computer to restore Windows.
Finding other software
For information about other software for your tablet, go to Motion Computing Accessories
and the Motion Computing Store. You will find links to software solutions for purchase as
well as free downloads from Motion Computing and its service partners.
Chapter 2 Using your C5v/F5v
Finding other software 61
62 Chapter 2 Using your C5v/F5v
Finding other software
Caring for your C5v/
F5v
Proper care and maintenance will keep your C5v/F5v Tablet PC working and in good
condition for a long time. For general information about care of the tablet and its
components and accessories, see the Safety and Regulatory Guide included with your
tablet PC.
WARNING: Follow the guidelines listed below when caring for your tablet PC and its
components. Improper use may damage the tablet PC and its components and void the
warranty.
General care
• Protect the tablet PC from exposure to extreme temperatures, shock, liquids and strong
magnetic fields.
• Do not place heavy objects on top of the tablet PC.
• If you are storing the tablet for a long time, unplug the power adapter and remove the
battery after partially discharging it.
• Do not open the case. Opening the case will void your warranty.
Chapter 3 Caring for your C5v/F5v
63
Caring for the display
Follow these suggestions to keep your display clean:
• Clean fingerprints and smudges from the display surface by wiping it with the display
cloth provided.
• If needed, use a cleaning solution recommended by Motion Computing to clean the
display. Spray the solution on a cloth then wipe the display. Never spray directly onto the
display surface and never use an abrasive cleaner.
• If liquid is spilled on the display, wipe it up immediately with a soft cloth like the one
provided with the tablet.
• Use only the C5v/F5v pen to write on the display. Any other object could damage the
display surface.
• Protect the display surface from unnecessary contact by using a case when transporting
the tablet PC.
• Cover the display with a protective display film.
• Avoid exposing the display to direct sunlight for long periods of time.
• If your tablet comes with a View Anywhere display, clean with any alcohol-based
product recommended for anti-reflective glass. Other cleaning products might leave a
residue.
• You can also purchase protective display films as well as protective cases from the
Motion Computing Accessories page.
Cleaning solutions
Motion Computing maintains a list of C5v chemical disinfectants and F5v chemical
disinfectants on its website.
WARNING: Do not use any corrosive or abrasive cleaners to clean or disinfect the tablet.
Caring for the pen
If you use a pen with your tablet:
• Store the pen in the pen holder when not in use.
• Avoid storing the pen vertically on its tip. It can damage the pen-to-digitizer function.
• Keep the pen away from any liquid because the pen contains electronic components
that could be damaged when wet.
• In certain environments, particles or debris can stick to the pen tip or the tablet PC
display. Make sure you wipe off the pen with a soft cloth to avoid scratching the display.
• Change the tips regularly, especially if you drop the pen onto a rough surface that could
damage the tip or embed debris in it. Damaged pen tips can scratch the display.
64 Chapter 3 Caring for your C5v/F5v
Caring for the display
NOTE: To order pens or new pen tips, go to Motion Computing Accessories.
Replacing pen tips
Pen tips eventually wear down or get damaged, so the pen includes extra tips and a tool for
replacing them.
With typical use, you should change the pen tip every 90 days. If you use the pen in a dirty
environment, you should change the pen tip every 30 days. Particles can become
embedded in the pen tip and scratch the display.
To replace the pen tip
1. Grasp the old tip with the replacement tool. Use the notch on the ring to grab the tip.
2. Pull the old tip out of the pen.
3. Insert a new tip, placing the flat end of the pen tip in first.
4. Apply slight pressure to push the tip in to place.
Cleaning in a healthcare environment
This section describes the cleaning procedures for the tablet PC in a healthcare
environment.
Disinfecting procedures
You should periodically disinfect the tablet according to the institutional polices of surface
and equipment safety and cleanliness. Motion has tested a variety of antimicrobial solvents
and information on specific products is available upon request.
According to the Centers for Disease Control and Prevention, “items that do not ordinarily
touch the patient or touch only intact skin are not involved in disease transmission, and
generally do not necessitate disinfection between uses on different patients”.1 We
recommend using an EPA-approved low-level disinfectant when general cleaning is
required. For a list of cleaning solutions tested by Motion Computing, see “Cleaning
solutions” on page 64.
If the tablet becomes soiled with blood or other body fluids, a hospital-approved low-level
disinfectant that is tuberculocidal/virucidal when used at recommended dilutions and
contact times can be used.
1. Centers for Disease Control and Prevention. “Sterilization or Disinfection of Medical Devices-General
Principles.” 2002.
 (20 Sept. 2006).
Chapter 3 Caring for your C5v/F5v
Cleaning in a healthcare environment 65
Visibly soiled areas should first be cleaned and then disinfected, or a detergent disinfectant
can be used. For disinfection, the cleaned areas should be moistened with the appropriate
germicide and allowed to air dry.1
If the tablet is used with patients who are infected or colonized with vancomycin-resistant
enterococci or other drug-resistant microorganisms judged by the infection control
program (based on current state, regional, or national recommendations, to be of special or
clinical or epidemiologic significance or with highly virulent microorganisms such as Ebola
or Lassa), then the unit should be dedicated to one patient or patient cohort or subjected to
low-level cleaning between patient uses.1
Training and documentation considerations
All users of tablet computers in the healthcare environment should be provided with
training on proper cleaning procedures. Cleaning procedures should be added to the
institution's policies and procedures for infection prevention.
Cleaning the fingerprint reader
Under normal circumstances, you should clean the fingerprint reader once a month, or
whenever necessary.
To clean the fingerprint reader
1. Shut down the tablet, unplug it, and remove the battery.
2. Lightly spray a cotton swab with household window cleaner.
3. Gently rub the sensor surface with the cotton swab, slowly rotating the swab so a new,
clean surface of the swab is constantly exposed to the sensor surface. Do not allow
cleaner to drip or run down into the electronics around the sensor.
Do not use bleach, solvents, or abrasives. Do not spray or pour any liquid directly on the
sensor.
4. After cleaning, gently rub the surfaces again with a clean, dry cotton swab. Use a clean
swab each time you clean the sensor.
1. Centers for Disease Control and Prevention. “Sterilization or Disinfection of Patient-Care EquipmentHIV Related.” 2000.
 (20 Sept. 2006).
66 Chapter 3 Caring for your C5v/F5v
Cleaning the fingerprint reader
Caring for the tablet battery
To maximize the performance of the battery, condition the battery once a month. To
condition it, run the tablet on battery power until the battery’s charge level drops below 20
percent. Then use AC power until it is fully charged.
You will receive a message if the tablet detects that the battery needs conditioning.
For more information about batteries, see “Using the battery” on page 43.
Traveling with your C5v/F5v Tablet PC
Use the following tips when you travel with your C5v/F5v Tablet PC:
• Put the tablet PC in a case to protect the display. Motion Computing sells a variety of
cases for the C5v/F5v. You can purchase one at the Motion Computing Accessories page.
• Store the pen in the pen holder located on the back side of the tablet handle.
• Pack the tablet PC securely in a briefcase or hand-carried luggage and keep it separate
from toiletries, liquids and food. Do not pack it in checked luggage.
• Before extended use in the field or long trips away from AC power, adjust the power
properties to maximize battery conservation. See “Changing the power plan” on
page 48.
• For international travel, use the appropriate adapters for your destination’s electrical
outlets. You do not need to buy a voltage converter; the Motion AC adapter will
automatically adjust to different voltages.
• You may want to carry proof of ownership or a merchandise passport when traveling
internationally.
• Consult your insurance and credit card companies to learn about emergency travel
assistance in case your tablet PC becomes lost or disabled.
• Do not carry your tablet through a metal detector.
• Turn off the tablet PC or place it in hibernation mode for airplane takeoff and landing.
NOTE: The FAA requires that you suspend Wi-Fi, Bluetooth and mobile broadband connections
before boarding a plane. You can disable them all at once. To disable the wireless devices,
open Motion Dashboard, tap the Wireless tab, and clear the check box next to each the
wireless devices listed.
DANGER: Do not transport Li-ion batteries in checked baggage. The baggage hold can get
very hot, which can overheat the Li-ion battery and result in an explosion. You can take up
to two spare batteries in carry-on luggage, in addition to the one in the unit. Transporting
batteries in checked baggage or transporting more than two spare batteries is a violation of
federal transportation regulations.
Chapter 3 Caring for your C5v/F5v
Caring for the tablet battery 67
68 Chapter 3 Caring for your C5v/F5v
Traveling with your C5v/F5v Tablet PC
Troubleshooting and
FAQs
Motion Computing Tablet PCs are thoroughly tested for performance and quality, but
occasionally problems can still occur. If you do not find the information you are looking for
in this section, go to Motion Computing Support.
Troubleshooting
Use the information in this section to identify and resolve common issues. If an issue has
more than one potential cause, the most common cause is listed first.
Power problems
The tablet does not shut down
• An application might have stopped responding. Use Task Manager to manually stop the
application. Press Ctrl+Alt+Delete or press the Security button and select Start Task
Manager. You can also press and hold the power button
for five seconds to force the
tablet to shut down. However, this is strongly discouraged.
• If the tablet does not shut down after holding the power switch for five seconds, do the
following:
1. Remove the battery (see “Removing and replacing the battery” on page 46).
2. Unplug the power adapter.
Chapter 4 Troubleshooting and FAQs
69
3. Press the camera, Windows Security, and dashboard buttons, simultaneously. For the
locations of these button, see below.
Dashboard button
Windows Security button
camera button
The tablet will not enter Hibernation mode
• Hibernation might not be enabled. Enable hibernation by adjusting the power button
behavior from Motion Dashboard. See “Changing how the power button functions” on
page 49.
The tablet does not return from Hibernation while on battery power
• The battery might be depleted. Plug the tablet in to AC power.
The power button is blinking but nothing is happening
• The tablet is in sleep mode. Press the power button to wake up the tablet. To power off
the tablet completely, you can press and hold the power button
about 5 seconds.
However, this is strongly discouraged. Under normal conditions, power off the tablet
from the Start menu by tapping Shut down.
The display goes black while the tablet PC is still turned on
• The tablet might have turned off the display to save power. To restore the display, touch
the screen with your finger or the pen.
• The tablet might have gone into Sleep mode. Press and hold the power button
for
about one second.
• The tablet might have gone into low-battery Hibernation mode. In Hibernation mode,
the power status light is off. Plug the tablet in to AC power, then press and hold the
power button for about one second.
70 Chapter 4 Troubleshooting and FAQs
Troubleshooting
Battery problems
The battery does not last very long (less than three hours)
• Hot or cold conditions can adversely affect the battery charge. Use AC power if you are
operating the tablet in these conditions.
• Accessory devices such as a DVD player and applications that make heavy use of the
hard drive can drain the battery more quickly. Remove the accessory devices or use AC
power if possible.
• Condition the battery once a month by using the tablet on battery power and allowing
the battery charge to drop below 20 percent before connecting the battery to AC power.
• The battery may be weakening. Use a different battery if possible.
• For other battery optimizing tips, see “Battery and power management tips” on page 48.
Display problems
When I connect to an external monitor, the cursor appears on the external monitor
and not on my tablet
• This is a known Windows 7 issue. If you have connected multiple touch-enabled displays,
Windows may not assign touch to the correct display. To fix this issue, run Setup to
assign touch to the appropriate display. Make sure a keyboard is attached to your tablet
and then open Motion Dashboard. Tap Pen & Tablet, then tap Tablet PC Settings. Tap
the Display tab, then tap Setup next to “Configure your pen and touch displays.” Tap
Touch Input, then press the Enter key until you see the instructions appear on the
display that you want to use for touch input. Follow the on-screen instructions for
setting up touch on this display.
When I disconnect an external monitor, the desktop area is larger than the tablet PC
display
• The tablet may have expanded the desktop beyond the display area of the tablet PC
display when it was connected to the external monitor. Use Motion Dashboard to reset
the tablet PC to the display setting for stand-alone tablets. Open Motion Dashboard, tap
Display. Then, from the Display Scheme drop-down list, select Tablet Only.
• The display resolution might not match the native resolution of the LCD display. You can
use other display resolutions, but you will get the best display quality when the display
resolution matches the native resolution of the LCD display. Use Windows Display
Properties to set the display resolution to 1024 × 768 pixels. For more information, open
Windows Help and Support and search for “change resolution”.
The display goes black while the Tablet PC is still turned on
• The tablet PC might have turned off the display to save power. To restore the display, tap
the screen with the pen (or touch the screen if your tablet has a touchscreen display).
• The tablet might have gone into Sleep mode. Press and hold the power button
for
about one second.
• The tablet might have gone into low-battery Hibernation mode. In Hibernation mode,
the power status light is off. Plug the tablet in to AC power, then press and hold the
power button for about one second.
Chapter 4 Troubleshooting and FAQs
Troubleshooting 71
The display is too dim
• The display brightness may be set too low. Use Motion Dashboard to brighten the
display. Open Motion Dashboard, tap Display, then move the brightness slider to the
desired level.
The display is unreadable or distorted
• The screen resolution and color quality may not be set correctly. Use Windows Display
Properties to reset the display settings. From Windows Control Panel, select Hardware
and Sound category. Under Display, change the resolution until the display appears
normally.
• The display driver may have been removed or become corrupted. Use Windows Device
Manager to reinstall the driver. For more information, open Windows Help and Support
and search for “update driver”.
To update the display device driver
1. Make sure that the tablet is connected to a network.
2. In Control Panel, tap the System and Security category.
3. Select System.
4. Under System, select Device Manager.
5. Expand Display adapters.
6. Select the adapter and select Action > Update Driver Software.
7. Follow the on-screen instructions.
Touch or pen problems
The tablet PC does not respond to the pen I am using
• Use only the C5v/F5v pen with the tablet. The tablet PC does not respond to other
digitizer pens, even Motion Computing pens for other models.
When I add an external display, touch input does not appear on the desired display
• Run touch set up on the desired display. Make sure a keyboard is attached to your tablet
and then open Motion Dashboard. Tap Pen & Tablet, then tap Tablet PC Settings. Tap
the Display tab, then tap Setup next to “Configure your pen and touch displays.” Tap
Touch Input, then press the Enter key until you see the instructions appear on the
display that you want to use for touch input. Follow the on-screen instructions for
setting up touch on this display.
When I write, I inadvertently click the function button on the pen
• Try adjusting how you hold the pen. Avoid resting your finger on the function button.
You can also disable the function button. open Motion Dashboard then tap Pen &
Tablet. Tap Pen & Input Devices and tap the Pen Options tab. Clear the check mark
next to the box, “Use the pen button as a right-click equivalent.”
72 Chapter 4 Troubleshooting and FAQs
Troubleshooting
The pen function button does not work
• You may not be pressing the button early enough. Try pressing and holding the pen
function button before you touch the pen to the display surface.
• The pen function button may be disabled. To enable it, open Motion Dashboard then tap
Pen & Tablet. Tap Pen & Input Devices and tap the Pen Options tab. Tap the check box
next to the box, “Use the pen button as a right-click equivalent.”
The eraser does not work
• The eraser may not be enabled. You can use Tablet and Pen Settings window to enable
the eraser. See “Adjusting pen settings” on page 25. The eraser works on digital ink only,
not text.
On-screen instructions require me to press Enter or Esc, but I don’t have a keyboard
• Connect a keyboard to the tablet to continue.
The C5v/F5v responds to my finger but not my pen
• The tablet may be configured to ignore pen input. To check, open Motion Dashboard
then tap Pen & Tablet. Tap Touch Settings and tap the Digitizer Options tab. Set Input
mode to the recognize both touch and pen.
The C5v/F5v tablet is too sensitive to touch
• Consider changing a touch setting so that you have to double-tap the display to enable
touch. Open Motion Dashboard then tap Pen & Tablet. Tap Touch Settings and then
Auto mode.
The pointer on the screen does not align with the pen
• The pen may need to be calibrated. Open Motion Dashboard, then tap Pen & Tablet, tap
Calibrate digitizer. A calibration program begins. Do not touch the display until the
program has finished.
Ports and connectors problems
The tablet does not recognize the USB 2.0 device
• Windows 7 may take a short time to recognize the USB device. Wait a few moments to
see if Windows recognizes the device.
• The device may not be connected properly. Check the connection and ensure it is
inserted properly into the USB port.
• The correct driver might not be included with Windows 7. Check the manufacturer’s
website for a current driver.
The C5v/F5v is in its dock, but the tablet does not recognize any accessory devices,
such as the external disk drive or monitor
• The C5v/F5v may not be fully seated in the dock. Remove it from the dock and then
replace it.
Chapter 4 Troubleshooting and FAQs
Troubleshooting 73
Network problems
The wireless adapter keeps connecting even when I do not want it to
• Disable the desired wireless adapter from the Motion Dashboard. Open Motion
Dashboard, tap Wireless and clear the check box next to the wireless adapter that you
want to disable.
I cannot connect to a wired Ethernet network
• To connect to an Ethernet network, your C5v/F5v must be connected to a docking
station. The Ethernet port for the C5v/F5v is located on the dock.
• The connection may be loose. Remove the Ethernet cable and reconnect it.
• The Ethernet network may be experiencing problems. Ask your neighbors if they have
network access.
• Replace the Ethernet cable.
Wi-Fi problems
I cannot connect to a wireless Wi-Fi network
• Your C5v/F5v may not have located a Wi-Fi network. From the Start menu, tap Control
Panel then Network and Internet. View your active networks. If no network is
connected, tap Connect to a network and select a network from the list.
• Wi-Fi must be enabled from the Motion Dashboard. Open Motion Dashboard, tap
Wireless and tap the check box next to Enable 802.11 Internal Wireless.
• You may not have access to the network. Obtain a user name and password from an
administrator for the network.
• Your tablet’s security settings may prevent a connection, for example, broadcasting a
network name may be enabled or encryption is turned on. Check with your system
administrator.
Bluetooth problems
I cannot connect to a Bluetooth network
• Bluetooth must be enabled from the Motion Dashboard. Open Motion Dashboard, tap
Wireless and tap the check box next to Enable Bluetooth Internal Wireless.
• Your Bluetooth device must be paired. From the notification area, tap the Bluetooth icon
and select Add a Device. Make sure the Bluetooth device is discoverable according its
manufacturer’s instructions. Select the desired Bluetooth device from the list of available
devices. Follow the on-screen instructions to complete the procedure.
• Your Bluetooth device is out-of-range. The Bluetooth devices are designed for shortrange communication and can connect at distances up to 33 feet (10 meters).
No other Bluetooth device can detect the C5v/F5v tablet
• From the notification area, tap the Bluetooth icon
and select Open settings. On the
Options tab, select Allow Bluetooth devices to find this computer.
74 Chapter 4 Troubleshooting and FAQs
Troubleshooting
I tried to pair my Bluetooth device several times but it is not detected:
• Bluetooth must be enabled from the Motion Dashboard. Open Motion Dashboard, tap
Wireless and tap the check box next to Enable Bluetooth Internal Wireless.
• Ensure that the Bluetooth device you are adding is discoverable. See the device’s
manufacturer’s instructions for more information.
• Ensure that the Bluetooth device battery is charged.
• Check which Bluetooth devices are connected. From the notification area, tap the
Bluetooth icon and select Show Bluetooth Devices. The Devices window displays all
the Bluetooth devices that are currently connected.
• If the tablet still cannot detect the Bluetooth device, contact the device manufacturer for
assistance.
My Bluetooth device doesn’t work properly
• Some issues arise when using Bluetooth devices as listed below.
Bluetooth wireless tips
Motion Computing and its Bluetooth partners have worked to ensure a positive experience
with this technology and to ensure Bluetooth interoperability. In doing so, we have found
the following issues:
• Interference—If you are running Bluetooth and Wi-Fi at the same time, interference can
affect the Bluetooth performance. This is most noticeable if:
– You try to transfer large amounts of data, such as file transfers
– Several Bluetooth devices are operating in an office simultaneously
• Speech Recognition—Bluetooth audio has not been fully developed for speech
recognition. Therefore, for speech recognition, we recommend that you not use a
Bluetooth wireless headset. A better solution is to use Motion Speak Anywhere, which
can record clear audio, dictate notes and use voice commands without a microphone
headset.
• Disconnection—Some Bluetooth devices will disconnect when they go into powersaving mode. Most devices will automatically reconnect when they become active again.
• Incompatible drivers—If you attempt to install other wireless headset or other audio
drivers (such as Bluetooth or USB) over the tablet PC audio drivers, a malfunction of the
tablet PC audio system may occur because the drivers may not be compatible.
• Interoperability—If you are having problems with interoperability of Bluetooth
devices, contact the manufacturer of your Bluetooth device and check its compatibility
with the Bluetooth software installed on your tablet PC.
• Security—Bluetooth devices use a passkey to create a secure connection between the
tablet PC and the Bluetooth device. Although the passkey exchange helps to secure your
data, Bluetooth wireless technology should not be considered completely secure.
Chapter 4 Troubleshooting and FAQs
Troubleshooting 75
Mobile broadband with GPS problems
I cannot connect to a mobile broadband network
• Mobile broadband is only available if you purchased your C5v/F5v with the optional
Mobile Broadband with GPS module.
• A mobile broadband network requires you to have a data plan from a cellular network
provider.
• You may need a SIM card from your network provider. If the network is on a UMTS
network (such as AT&T, Orange or T-Mobile), your network carrier must provide you with
a SIM card and you insert the SIM card in the slot on the left side of the tablet. The SIM
card contains your account information.
• Mobile Broadband with GPS must be enabled from the Motion Dashboard. Open Motion
Dashboard, tap Wireless and tap the check box next to Enable Mobile Broadband with
GPS.
• Motion Connection Manager must be running. The Motion Connection Manager icon
appears in the notification area when it is running. To start it, from Windows Start menu,
select All Programs > Motion Computing > MotionCM.
• Mobile broadband must be set up through the Motion Connection Manager. To set it up,
from Windows Start menu, select All Programs > Motion Computing > MotionCM. Tap
the Help icon and select the help topic, “Setting up mobile broadband.” Follow the
instructions to set up a network profile and connect to a mobile broadband network.
I changed my SIM card and now I cannot connect to my mobile broadband network
• After inserting a SIM card, the Motion Connection Manager must be restarted. From the
notification area, tap the Motion Connection Manager icon and tap Exit. Restart the
Connection Manager, from Windows Start menu, select All Programs > Motion
Computing > MotionCM.
The GPS does not work
• The GPS receiver is only available if you purchased your C5v/F5v with the optional
Mobile Broadband with GPS module.
• Mobile Broadband with GPS must be enabled from the Motion Dashboard. Open Motion
Dashboard, tap Wireless and tap the check box next to Enable Mobile Broadband with
GPS.
• Motion Connection Manager must be running. The Motion Connection Manager icon
appears in the notification area when it is running. To start it, from Windows Start menu,
select All Programs > Motion Computing > MotionCM.
• GPS must be started from the Motion Connection Manager. Tap the Motion Connection
Manager icon
and select Start GPS.
• The GPS navigation or mapping application your are using must be able to handle
standard NMEA GPS information.
76 Chapter 4 Troubleshooting and FAQs
Troubleshooting
My GPS isn’t working properly
• Mobile Broadband with GPS must be enabled from the Motion Dashboard. Open Motion
Dashboard, tap Wireless and tap the check box next to Enable Mobile Broadband with
GPS.
• If performance is slow, you may be blocking GPS antenna, which is located on the right,
bottom side of the tablet PC. Do not hold the tablet in this area (shown below) when
using the GPS receiver.
GPS receiver
antenna area
Audio problems
No sound is coming from the built-in speakers
• Ensure that nothing is connected to the audio in/out jack. Connecting headphones or
external speakers disables the built-in speaker.
• The volume may be set too low or muted. You can use Motion Dashboard to increase the
volume or turn mute off. Open Motion Dashboard, then tap Audio and move the slider
to the desired volume.
No sound is coming from the built-in speakers or external speakers
• The volume may be set too low or muted. You can use Motion Dashboard to increase the
volume or turn mute off. Open Motion Dashboard, then tap Audio and move the slider
to the desired volume.
• The integrated audio components may have been overwritten. If you install a third-party
audio device (such as a USB or Bluetooth device), the integrated audio may stop
working. If this happens, reinstall the audio drivers. After you install these, if you still have
problems recording, contact your system administrator or service provider.
System problems
I forgot my BIOS password and cannot access my tablet
• You can enter several incorrect passwords before the BIOS temporarily locks the system.
You can try again by restarting the system. If you still cannot log on, contact your system
administrator.
The tablet seems to be operating slower than usual
• Reboot.
• The solid state drive (SSD) may be full or nearly full. You can use Disk Cleanup to free up
space on your drive. For instructions, open Windows Help and search for “disk cleanup.”
• Unlike traditional hard drives, SSD drives, like the one installed in C5v/F5v, see no
performance benefit from traditional HDD defragmentation tools. Using these tools
Chapter 4 Troubleshooting and FAQs
Troubleshooting 77
simply adds unnecessary wear to the SSD. It is recommended that you disable any
automatic or scheduled defragmentation utilities on your tablet.
I want to make my tablet run faster
• Change the Power plan to High Performance from the Motion Dashboard Power tab.
• Adjust your Windows settings. For instructions, open Windows Help and search for
“improve performance.”
Frequently asked questions
How can I make the battery charge last longer?
• By default, the power plan for the C5v/F5v is a balance between optimal performance
and a long battery charge. If you want the tablet to run longer between charges, use the
Power saver power plan. Open Motion Dashboard, tap Power. Tap Power Options and
select Power saver.
• Use the Dynamic display setting. This automatically controls the display to conserve
power. Open Motion Dashboard, tap Display then tap Dynamic.
• Set the display to the dimmest level you are comfortable with. Open Motion Dashboard,
tap Display then move the Brightness slider to the desired level.
• Disconnect any Ethernet connections that are not being used. Disable the wireless
adapter and Bluetooth adapter if you are not using them. Disconnect unnecessary USB
devices. To disable the adapter, open Motion Dashboard, tap Wireless and clear the
check box next to the adapters you are not using.
• Stop unnecessary background applications and processes.
How do I know if the tablet is charging when I plug it in to a power adapter?
• The battery gauge button on the left side of the tablet is amber when the tablet is
charging.
How do I check the battery charge when I’m running on the battery?
• When you press the battery gauge button on the left side of the tablet, battery gauge
lights appear on the front. If no lights appear, you should attach the tablet to a power
source immediately. Five lights indicate a full charge.
How do I clean the display screen?
• To clean the display screen, wipe it with a soft cloth (like the one supplied). Do not spray
cleaners, pour any liquid, or wipe any abrasive cleaner on the screen or any surface of the
tablet PC. Do not use tissues or paper towels to clean the screen. They contain wood
fibers that may scratch the surface.
• Motion Computing maintains a list of C5v chemical disinfectants and F5v chemical
disinfectants on its website.
How do I clean the View Anywhere display screen?
• To clean the View Anywhere display screen, wipe it with a soft cloth (like the one
supplied). If needed, clean with any alcohol-based product recommended for use on
anti-reflective glass. Other cleaning products may leave a residue. Do not spray cleaners,
spray or pour any liquid, nor wipe any abrasive cleaner on the screen nor any surface of
78 Chapter 4 Troubleshooting and FAQs
Frequently asked questions
the unit. Do not use tissues or paper towels to clean the screen. They contain wood fibers
and may scratch the surface.
Will scratches affect the performance of the display or digitizer?
• Our testing has not found appreciable loss of performance on a scratched display.
How sensitive is the screen to various elements?
• As with any computer or electronic device, you should protect the tablet PC from liquids,
dirt and sand, other contaminants and extreme heat.
Why is the tablet PC lacking USB and display adapter ports?
• The tablet PC is designed to be easy to clean and disinfect, so ports and connectors are
minimized. (The F5v has a USB port, while the C5v does not have any USB ports.)
Will any monitor, USB device, keyboard or mouse work with the tablet PC?
• If the device has a driver for Windows, it will work with the tablet PC. For a list of products
that have been tested for Windows, look for the Windows Marketplace Tested Products
page on the Microsoft website.
How do I adjust the tablet PC for left-handed use?
• From the Motion Dashboard, tap Pen and Tablet, then Tablet PC Settings, then the
Other tab. You can select left- or right-handed which changes the location of the menus.
How can I stop the display screen from rotating automatically?
• From the navigation area, tap the Motion icon
then tap Options and clear
Automatic Display Rotation.
What do I need to use the Tablet PC in another country?
• You will need a travel plug adapter, which you can find in airports and travel stores. You
do not need to buy a voltage converter; the Motion AC adapter will automatically adjust
to different voltages.
Where can I learn more about my C5v/F5v?
• To learn more about the C5v/F5v, check out our training tutorials and knowledge base
articles. Motion Computing also offers corporate training classes.
Can I recycle my old computer?
• Yes. Motion Computing has a recycling program that allows free return of all Motion
branded products and non-Motion branded electronics with the purchase of a similar
Motion tablet for processing and disposal in an environmentally safe manner. For details,
go to Motion Computing recycling program.
Chapter 4 Troubleshooting and FAQs
Frequently asked questions 79
80 Chapter 4 Troubleshooting and FAQs
Frequently asked questions
Index
Numerics
802.11 Wi-Fi 10
AC power 7
accessories 15, 61
amber light 78
amber lights 44
ambient light sensor 32
antenna, GPS 77
audio
drivers 77
settings 20
troubleshooting 77
authentication 2
automatic display rotation 21
enabling or disabling 33
Automatic Updates 57
battery
checking status 43, 78
gauge 4
health 21, 67
hot swapping 47
optimizing 48, 78
status light 44
swapping 47
tips 48
using 43–48
battery gauge 7, 44
battery gauge button 44
BIOS
boot options 60
recovering data 60
troubleshooting password 77
blinking lights 44
blinking power button 70
Bluetooth
discovery 75
setting up 11, 75
tips 75
boot options 60
buttons
about 30
configuring 31
functions 30
C5v/F5v
hardware overview 3–7
specifications 1
calibrating for touch 22
calibrating the digitizer 22
calibrating the pen 22
camera
button 5
documentation 5, 6
web 4
cameras 38
care and maintenance
display 64
fingerprint reader 66
general care 63
pen 64
replacing pen tips 65
tablet pen 64
checking battery status 43
cleaning
fingerprint reader 66
cleaning the display 64
conditioning the battery 67
configuring
front panel buttons 31
connecting
display monitor 14
docking station 14
context-sensitive menu 21, 24
Corning Gorilla glass 1
credit card 21
Ctrl+Alt+Del 5, 12
customizing buttons 31
Dashboard button
about 30
configuring 31
data encryption 2
81
desktop
Getting Started doc 18
introduction 17
dictation mode 37
digital ink 27
digitizer
Motion Dashboard options 23
digitizer pen
calibrating 22
directional pad 4, 31
display
automatic display rotation 21, 33, 79
care and cleaning 64
connecting external 14
Display Scheme 35
dynamic brightness fixed brightness
32
extended 34
fixed brightness 32
locking display orientation 33
mirror 34
orientation 79
rotating 33
scratch resistance 1
scratches 79
settings 32–36
touch with multiple 25, 35
troubleshooting 71–72
turning off automatic rotation 79
using 32
Display Scheme 35
disposing of used batteries 47
docking connector 4
docking input panel on the screen 28
docking station 14
double-tap 21, 23, 25
downloads, free 61
dynamic brightness 32
encryption 2
End key 29
eraser
use pen function button as 25
Esc button
configuring 31
extended display 34
external display, using 33
82
Index
FAA wireless air travel requirement 67
features
optional 2
fingerprint reader 50
about 50
tips 52
five-way directional controller 4, 31
flashing lights 44
flicks 21, 24
free downloads 61
front panel buttons
about 30
configuring 31
front panel light 44
Function button
about 30
configuring 31
gestures 24
enable multi-touch 24
Getting Started 18
Gobi Mobile Broadband with GPS module
Gorilla glass 1
GPS antenna 77
GPS receiver 2, 10
troubleshooting 76
green lights 44
handwriting recognition applications 29
hard drive activity 21
hardware
overview 3–??
hibernate 13, 70
about 49
Home key 29
hot swapping battery 47
indicator light 44
inking 24, 27
input mode 23
input panel
docking 28
numbers pad 28
input panel, docking or floating 28
Insert key 29
integrated microphones 37
Internet Options 57
keyboard 79
show special keys 29
Knowledge Base 15
knowledge base 79
OmniPass
about 50
OmniPass™ application 50
optimization
battery 48
power plan 48
landscape mode 33
LCD
View Anywhere 3
left-handedness 20, 24, 25, 28, 79
locking
the tablet 12
locking display orientation 33
microphones 20, 37
using 37
mirror display 34
mobile broadband 2, 10
Mobile Broadband with GPS module 2
mobile broadband, GPS 2
monitor only display 34
monitors
touch 35
touch input 25
monitors, using multiple 33
Motion Computing Accessories 15, 61
Motion Computing Store 15, 30
Motion Computing Support 15, 69
Motion Connection Manager 10, 76
Motion Dashboard 18, 21
opening 10, 18
using 18–30
Motion Dashboard button 30
Motion Optimized power plan 48
Motion utilities 20
moving taskbar location 18
multi-touch gestures 24
notification area 20
numbers pad 28
Index
Page Down 31
Page down key 29
Page Up 31
Page up key 29
password replacement
about 53
using 53
passwords and user accounts 57
Pause key 29
pen
calibrating 22
care and maintenance 64
disable function button 25
disabling pen input 23
taking care of 64
troubleshooting 72
use function button as eraser 25
Pen & Input Devices 24
portrait mode 33
portrait orientation 33
power adapter
port 5
power button 49
blinking 70
power plan
Motion Optimized 48
Power Saver 78
Power Switch on battery or plugged in 49
Print screen key 29
recycle old computer 79
removing the battery 46
repairing Windows 60
replacing pen tips 65
replacing the battery 46
right-click 21, 25
rotating the display 33, 79
83
S
84
scheme
display 35
scratch resistance 1
scratches 79
screen. See display 79
Scroll lock key 29
security
features 2
using 2
setting up
Bluetooth 75
docking station 14
external monitor 14
mobile broadband 10
strong logon security 53
the tablet PC 7
Wi-Fi 10
setting up users and passwords 57
Shift+Tab 31
Shut down 70
shut down 49
sleep 12, 13
about 49
software solutions 61
spatial tolerance 25
Speak Anywhere 37
speaker 20, 77
specifications 1
speech recognition 37–38
setting up 38
status light 4, 44
strong logon security
about 53
enabling 53
swapping batteries 47
system image 13, 58
18
optional features 2
shutting down 49
software 61
specifications 1
training tutorials 79
Tablet PC input panel 28
Tablet PC Tips & Tricks 15
taskbar 10, 18
moving to left 18
text
entering 27–30
touch
and pen 23
calibrating 22
disabling touch input 23
gestures 24
on multiple displays 35
pointer, adjusting 24
pointer, show or hide 24
setting spatial tolerance, speed, and
duration 25
troubleshooting 72
using 21–25
using multiple monitors 25
touchscreen display 4
caring for 64
training 15
training classes
corporate 79
training tutorials 79
traveling with your tablet PC 67
troubleshooting
audio 77
battery 71
display 71
input 72
Tab key 31
Tablet & Pen Settings 31
tablet only display 34
tablet PC
accessories 15
desktop 17
managing with Motion Dashboard
USB 2.0 port
troubleshooting 73
USB port 5
user accounts 57
Index
using
external display 33
external monitors 33
microphones 37
Motion Dashboard 18–30
power plans 48
security 2
sleep mode 49
speech recognition 37
View Anywhere display 3
voice commands 37
web camera 4
Wi-Fi 10
Windows
notification area 20, 33
repairing 60
Setup wizard 8
speech recognition 37
Windows.old directory 61
Windows Firewall 57
Windows Security Center
about 57
using 57
wireless
setting up 802.11 Wi-Fi 10
setting up Bluetooth 11
setting up mobile broadband 10
wireless network
setting up 8
troubleshooting 74–75
wireless networking 10, 11
WWLAN. See mobile broadband
zoom in and out 21
Index
85

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Motion Computing
Copyright                       : Motion Computing 2011
Create Date                     : 2011:12:20 13:13:43Z
Modify Date                     : 2012:01:20 15:36:04+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.4.5 (Windows)
Format                          : application/pdf
Title                           : C5v/F5v Tablet PC User’s Guide
Creator                         : Motion Computing
Creator Tool                    : FrameMaker 10.0.1
Metadata Date                   : 2012:01:20 15:36:04+08:00
Document ID                     : uuid:5bfa0ebc-32cc-4bd4-bac4-e34e0e548ada
Instance ID                     : uuid:d60b87fa-84b5-45e6-b4fb-7af4991f8d9e
Page Mode                       : UseOutlines
Page Count                      : 91
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q3QTIRFID7960

Navigation menu