Xplore Technologies of America WMIA123AG Tablet PC with Atheros 802.11 ABG radio card User Manual safety guide

Download:
Mirror Download [FCC.gov]
Document ID	662024
Application ID	XP5ax343rfomXAz0NKqIaQ==
Document Description	safety guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.5kB (268708 bits)
Date Submitted	2006-05-25 00:00:00
Date Available	2006-06-08 00:00:00
Creation Date	2006-03-15 10:35:00
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-05-25 14:40:08
Document Title	safety guide
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	Your User Name

Safety and Regulatory Guide
ƒ
For Motion Tablet PCs and Accessories
Product Safety Information
Safety Compliance Notices
Regulatory Notices
Guide de sécurité et de réglementation
ƒ
Pour PC tablettes et accessoires Motion
Informations relatives à la sécurité du produit
Avis de conformité aux normes de sécurité
Avis relatifs aux réglementations
Sicherheits- und Vorschriftshandbuch
ƒ
Für Motion Tablet PCs und Zubehör
Produktsicherheitshinweise
Sicherheitseinhaltungserklärung
Vorschriftseinhaltungserklärung
ii
Product Safety Information
MotionTM Tablet PCs and accessories are designed to optimize safety, minimize strain,
and withstand the rigors of portability. However, to further reduce the risk of personal
injury or damage to the unit, certain precautions should be observed. The information
in this document applies to the Motion Computing M-Series, LE-Series, and the LSSeries Tablet PCs unless noted otherwise.
Product Mounting and Installation Disclaimer
Motion Computing shall not be liable under any theory of liability (including, without
limitation, contract, tort or statutory law) for any loss, damage, personal injury, or
other damage of any nature (including, without limitation, direct, special, incidental or
consequential damages) arising directly or indirectly as a result of improper or
inappropriate placement, installation, or use of its products or any other application. In
order to safely install and use MotionTM products, full consideration of occupants,
systems (e.g., the location of fuel lines, navigation systems, brakes lines, electrical,
drive train or other systems), air-bags and other back-up, warning or safety equipment
is required. Without limiting the foregoing, MotionTM specifically disclaims any
responsibility for the placement, use or installation of its products not consistent with
(i) the original manufacturer’s or governmental or regulatory specifications and
recommendations for the environment where the products will be placed, used or
installed, (ii) MotionTM written product instruction sheets, or (iii) workmanship
standards.
Basic Personal Safety Precautions
■ Do not attempt to service the Tablet PC nor its components yourself. Perform only
those service installations for which Motion provides special instructions, for
example, swapping the battery, adding an external battery, changing the hard disk
drive (LE-Series and M-Series only), or changing memory modules. See the Motion
web site at www.motioncomputing.com for a list of serviceable accessories for your
Tablet PC.
■ To avoid personal injury from electric shock or fire:
•
Completely power down the Tablet PC when replacing memory modules,
changing the hard disk drive, cleaning the Tablet PC, its components, or
chassis, or performing operations requiring similar steps. To do this, first
turn the power off at the power switch, remove the battery, then disconnect
the AC adapter from the electrical outlet or from any other type of external
power source, such as an external battery
•
Do not operate the Tablet PC near water, for example, near a bathtub,
kitchen sink or laundry tub, in a wet basement, by a swimming pool, or in
the rain. The cases, portfolios, and other accessories currently offered by
English
Motion are not designed to be water resistant nor water tight. Visit the
Motion website to see the most current list of accessories.
•
Do not connect or disconnect any cables or perform maintenance or
reconfiguration of this product during an electrical storm.
•
Avoid using the wired modem or LAN during an electrical storm, as a
remote risk of electric shock from lightning exists.
•
Do not push foreign objects into air vents or other openings of the Tablet PC
or accessories, such as the PCA card slots or the optical disk drive bays.
Doing so can short out interior components and may cause fire or electric
shock.
•
When installing memory modules, ground yourself by touching a grounded
conductive surface, such as a device with a grounded plug. Avoid touching
the pins and leads on the memory module or internal circuitry of the Tablet
PC.
■ If the Motion battery pack leaks and the fluid get in your eyes, do not rub them.
Instead, rinse your eyes with clean running water and immediately seek medical
attention. Otherwise, eye injury may result.
■ If acid leaking from the battery pack contacts your skin or clothing, immediately
wash it away with running water. Otherwise, skin inflammation can occur.
Environmental
■ The extraction and use of natural resources are required in the production of the
■
■
■
■
equipment you purchased. The equipment may contain hazardous substances that
could impact health and the environment if not disposed of using environmental
disposal systems available in your region.
To prevent the dissemination of those substances in our environment and to
diminish the impact on the natural resources, we encourage you to use the
appropriate take-back environmental disposal systems. Those disposal systems will
reuse or recycle most of the materials of your end-life equipment in compliance
with current environmental conventions.
The crossed-out wheeled bin symbol prompts you to use those environmental
disposal systems.
If you need more information about collection, disposal, reuse, and recycling
systems, please contact your local or regional waste administration.
Also, you can contact Motion Computing, Inc. for more information about the
environmental processes for our products.
English
Set Up Precautions
■ When setting up the Tablet PC in the Motion FlexDock for the LE-Series, Motion
■
■
■
■
■
MobileDock for the LS-Series, Desktop Stand, or Hardtop Keyboard (M-Series
only), place it on a level surface so it does not fall over and damage the unit,
docking station, keyboard, connectors, or other components.
When you move the Tablet PC between environments with very different humidity
and/or temperature ranges, allow sufficient time to adjust to the new humidity or
temperature.
Do not drop the Tablet PC or subject it to other mechanical shocks.
Do not apply heavy pressure to the Tablet PC or subject it to strong impact.
Excessive pressure or impact can cause damage to Tablet PC components or
otherwise cause malfunctions.
See the Installation Instructions before connecting to the power supply.
For important information about mounting and installation of Tablet PCs, see
“Product Mounting and Installation Disclaimer” on page 1.
Tablet PC Precautions
■ Do not attempt to service the Tablet PC yourself, disassemble nor modify it nor its
components. You may damage the unit or its components.
■ Operate the Tablet PC at the recommended temperature range of +5 C to +35 C
(+41oF to +95oF). Store it at a temperature of -20oC to +60oC (+4oF to +140oF)
■ Certain environments may contain particles or debris that can adhere to the Tablet
PC display or to the Tablet PC pen tip. To avoid damaging the display, clean it
frequently with the cleaning cloth provided or with a soft cloth. You may spray a
window-type cleaner or apply water to the cloth, but do not spray liquids directly on
the display.
■ Change pen tips regularly, especially if you work in an environment that contains
particles or debris. Dropping the pen onto a rough surface may damage the pen tip
or embed particles in it that can damage the Tablet PC display. For instructions
about changing the pen tips, refer to the Motion Tablet PC User Guide found on the
Tablet PC or go to the Motion website at www.motioncomputing.com to download
the latest version of this Guide.
■ Store the pen in the pen bay of the Tablet PC. Carrying it in a pocket, toolbox, or
similar receptacle that contains particles or debris may damage the pen tip or embed
particles in it that can damage the Tablet PC display.
English
High Risk and Dangerous Activity Warning
■ This computer system is not intended to be used as a medical device or for use in
high-risk or dangerous activities, including without limitation, the operation of
nuclear facilities, aircraft navigation or communications systems, hospital or
medical operations, air traffic control machines, treating, diagnosing, or monitoring
patients, or for any other uses where the failure of the computer system could lead
to death, personal injury, or severe environmental damage.
Cabling and Power Cord Precautions
■ Power cord sets for use in other countries must meet the requirements of that
country. Use the appropriate AC adapter and power cord for your locale. For
information about power cord set requirements, contact the Motion Reseller from
whom you purchased the product, or contact Motion Computing if you purchased
the product from us.
■ If no power cord was provided for your Tablet PC or for an accessory, purchase a
power cord that is approved for use in your country and that matches the required
voltage / amperage rating of the Tablet PC.
■ If you use an extension cord with your AC adapter, ensure that the total ampere
rating of the products plugged into the extension cord does not exceed the ampere
rating of the extension cable.
■ When using your power cord, make sure to position it around objects so it will not
be cut or punctured.
Power Adapter Precautions
■ Use only the AC adapter and power cord approved for this Tablet PC or Tablet PC
accessory. Use of another type of AC adapter may risk fire or explosion.
■ Place the AC adapter in a ventilated area, such as on a desktop or the floor, when
you use it to run the Tablet PC or to charge the battery. Do not cover the AC
adapter with papers or other items that will reduce cooling; also, do not use the AC
adapter while it is inside a carrying case.
■ Be sure that nothing rests on the AC adapter's power cable and that the cable is not
located where it can be tripped over or stepped on.
■ Disconnect power cords and cables by grasping the connector, not by pulling on the
cable itself. As you pull out the connector, keep it evenly aligned to avoid bending
any connector pins. Before you connect a cable, make sure both connectors are
correctly aligned.
English
Battery Pack Warnings and Precautions
■ The Tablet PC contains an internal lithium ion (Li-ion) battery pack. Replace the
■
■
■
■
■
■
■
■
■
■
■
■
internal battery pack only with a Motion battery or a Motion-recommended
equivalent to avoid the risk of fire or explosion resulting in personal injury.
If you use an external battery pack to power your Tablet PC, be sure you use only a
Motion-recommended third-party product. Using a non-Motion-recommended
external battery may cause the Tablet PC to overheat, emit smoke, burst and/or
ignite and cause personal injury or damage to the unit.
Do not use the battery pack in combination with other types of battery packs (such
as dry-cell battery packs), except the external Extended Battery option (LE-Series
only) available from Motion Computing, or battery packs with different capacities
or brands. This can result in it being over discharged during use or overcharged
during recharging, possibly leading it to leak acid, overheat, emit smoke, burst
and/or ignite.
Do not dispose of batteries in a fire. They may explode. Dispose of used batteries
according to the manufacturer's instructions. The label on the battery lists the
manufacturer’s name. See the section “Battery Pack Disposal” in the Guide for
more information about battery disposal.
Do not use nor leave the battery pack near a heat source. Heat can melt the
insulation and damage other safety features, possibly leading it to leak acid,
overheat, emit smoke, burst and/or ignite.
Do not immerse the battery pack in water nor allow it to get wet. Its protective
features can be damaged, it can be charged with extremely high current and voltage,
abnormal chemical reactions may occur, possibly leading it to leak acid, overheat,
emit smoke, burst and/or ignite.
Do not disassemble or modify the battery pack. If disassembled, the battery pack
could leak acid, overheat, emit smoke, burst and/or ignite.
Do not connect the positive (+) and negative (-) terminals with a metal object such
as wire. Short-circuiting may occur leading the battery pack to leak acid, overheat,
emit smoke, burst and/or ignite.
Do not pierce the battery pack with a sharp object, strike it with a hammer, step on
it, or throw it. These actions could damage or deform it, internal short-circuiting can
occur, possibly leading it to leak acid, overheat, emit smoke, burst and/or ignite.
Do not use an apparently deformed or damaged battery pack, which may leak acid,
overheat, emit smoke, burst and/or ignite.
Do not directly solder the battery pack. Heat can melt the insulation and damage
other safety features, possibly leading it to leak acid, overheat, emit smoke, burst
and/or ignite.
Store the battery pack in a location where children cannot reach it. Make sure
children do not remove the battery pack from the Tablet PC or charger.
If the battery pack leaks, gives off a bad odor, generates heat, becomes discolored
or deformed, or in any way appears abnormal during use, recharging or storage,
immediately remove it from the Tablet PC or charger and stop using it, If this is
English
discovered when you first use the battery, return it to your Motion reseller or to
Motion Computing, if you bought it directly from us.
■ Do not transport the lithium ion batteries used in your Tablet PC in checked
baggage. You may take up to two spare batteries in carry-on luggage in addition to
the one in your Tablet PC. Transporting batteries in checked baggage or
transporting more than two spare batteries in carry-on baggage violates
transportation law. Remember to remove batteries from the battery charger before
transporting it in carry-on or checked baggage.
Battery Precautions (Carbon and Alkaline)
■ Keep batteries out of reach of children.
■ Do not mix old and new batteries of different types (for example, carbon and
alkaline batteries).
■ Always remove old, weak, or worn-out batteries promptly and recycle or dispose of
them according to the manufacturer’s directions.
■ If a battery leaks, remove all batteries and dispose of them according to the
manufacturer’s directions. Before replacing the batteries, clean the battery
compartment in accordance with the battery manufacturer’s recommendations. If
battery fluid contacts your skin or clothes, immediately flush them with water.
Battery Warnings (Carbon and Alkaline)
■ Battery electrolytes are corrosive, CAN CAUSE DAMAGE TO THE EYES AND
SKIN, AND MAY BE TOXIC IF SWALLOWED. Avoid the following actions that
can cause the sudden release of battery electrolytes:
Do not open, puncture, or mutilate the batteries.
Do not heat the batteries.
Do not burn the batteries in a fire to dispose of them.
Battery Charger Precautions
■ Read the documentation supplied with the battery charger. This provides additional
information about charging and precautions for use.
■ Use only a Motion battery charger to recharge the batteries. It is specifically
designed for that purpose. Charging with a non-Motion battery charger could result
in extremely high current and voltage, abnormal chemical reactions may occur,
possibly leading it to leak acid, overheat, emit smoke, burst and/or ignite.
■ Battery charging temperature: The ambient temperature of the battery being
charged should range from 0º C to +40º C (+32º F to +104º F). Charging the battery
outside this range may harm battery performance or reduce battery life.
■ Do not recharge the battery pack near fire or in extremely hot weather. Hot
temperatures can inhibit recharging or can damage its built-in protective features.
Heat can possibly lead to acid leakage, overheating, smoking, bursting and/or
igniting.
English
■ If you transport the battery charger in checked baggage, be sure to remove the
batteries from the charger before packing it.
Battery Pack Disposal
■ Dispose of the lithium ion battery packs only at approved disposal sites. To locate
an appropriate site, contact the solid waste disposal officials where you live or look
for a rechargeable battery recycling website that lists disposal locations near you.
■ Do not dispose of battery packs in a fire, throw them in a trash receptacle, put them
in a recycling bin not intended for their disposal, or otherwise discard them in a
manner that may result in their being hazardous to the environment.
Travel Precautions
■ For information about transporting batteries, see the section “Battery Warnings and
Precautions” in this guide.
■ When traveling, do not store the Tablet PC in an overhead compartment or other
area where it could slide around, nor check it in your baggage.
■ Do not put the Tablet PC through a metal detector. You can safely put it through an
X-ray security machine without harming any components.
■ Be sure to charge the battery before you hand check the Tablet PC. You may be
asked to turn the Tablet PC on at a baggage check point.
Internal Modem Precautions (M-Series only)
■ The modem cable you connect to your Tablet PC (M-Series only) should have a
minimum wire size of 26 AWG (American wire gauge) and an UL-compliant RJ-11
modular plug.
■ Do not plug a modem connector (RJ-11) into a network connection (RJ-45). This
may damage the connector.
■ See the section “Telecommunication Devices/Modem Approvals” in this Guide for
important information about modem use.
Component Replacement Precautions (LESeries and M-Series only)
■ Install and use only components sold by Motion Computing in/with your Tablet PC.
Installation or use of non-Motion components may damage the Tablet PC and/or its
components and void the warranty.
■ Components currently available from Motion Computing as user replaceable parts
include an AC power adapter (rated for general use), memory modules, 3- or 6-cell
battery, external Extended Battery, and end caps (M-Series only). These
English
components may change from time to time. Contact Motion Computing for more
information or if you have questions about replacing a specific component.
■ Do not replace nor attempt to service internal Tablet PC components such as the
hard disk drive, Bluetooth card, antennas, fingerprint module components, etc. Such
actions can damage the Tablet PC and/or its components and void the warranty.
Wireless Mini-PCI Devices
While Motion sells and may recommend certain wireless mini-PCI devices for the
Tablet PC, these should only be installed by Motion or a qualified Motion reseller.
Contact Motion Computing or your authorized Motion reseller for information about
Motion-recommended wireless mini-PCI devices.
Accessory Precautions
■ Please read the instructions packaged with your accessories carefully before setting
up or operating them. The Motion accessory you purchase may include
documentation about safety, precautions, and warnings needed to set up or operate
the accessory. This accessory documentation provides specific information about
functionality, usage limitations, user serviceability, battery or component disposal,
handling precautions, or electrostatic discharge, etc. for the product.
■ The cases, portfolios, and other accessories currently offered by Motion are not
designed to be water resistant nor water tight. Visit the Motion website to see the
most current list of accessories.
Motion-Recommended Third-Party
Accessories
■ Use only Motion-recommended third-party accessories with a Motion Tablet PC.
■ If you choose to use a non-Motion-recommended third-party accessory, it is at your
own risk and may damage the Tablet PC and/or its components and the accessory
device and void the warranty.
Comfort and Health
HEALTH WARNING: Keyboard use or use of a pointing device may be linked to
serious injuries or disorders. For further information, visit the My Clinic website at
www.myoclinic.org.
You may help prevent the occasional discomfort in your hands, arms, shoulders, neck,
and other parts of your body by:
■ Taking frequent breaks to stretch and change your working position.
English
■ Resting your hands and wrists frequently so they have time to recover from
repetitive movements. Use a wrist pad.
■ Using the touch pad on a keyboard or the Tablet PC pen, which change the way you
use your hands and wrists; this provides a break from the keyboard keys or mouse.
If these symptoms persist or continue to occur and include pain, throbbing, aching,
tingling, numbness, burning sensations, or stiffness, DO NOT IGNORE THESE
WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL.
Regulatory and Safety Compliance
The following sections describe regulatory and safety compliance by country and by
region.
NOTE: To determine what regulatory and safety marks apply to a specific product, component,
or accessory, check the product label affixed to the product or its component.
Federal Communications Commission Notice
(United States)
Electromagnetic Interference (EMI) is any electromagnetic disturbance that
interrupts, obstructs, or otherwise degrades or limits the effective
performance of electronics or electrical equipment. These emissions can
potentially disrupt, degrade, or otherwise interfere with authorized electronic
emissions, which may include television, AM/FM broadcasts, cellular
services, radar, air-traffic control, and pagers.
The FCC Rules and Regulations have established Radio Frequency (RF) emission
limits to provide an interference-free RF spectrum. Many electronic devices, including
computers, generate RF energy incidental to their intended function and are, therefore,
covered by these rules.
Your Motion Tablet PC system, Motion FlexDock for the LE-Series, Motion
MobileDock for the LS-Series, Motion keyboards, and all accessories have been
designed and found to meet the regulatory agency limits for Electromagnetic
Compatibility (EMC). EMC is the ability of electronic devices, including computers,
to function properly together in the electronic environment. However, there is no
guarantee that in a specific installation it will not cause interference. Should this
equipment cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct
the interference by one or more of the following measures:
■ Reorient the receiving antenna.
■ Relocate the Tablet PC and the receiver.
■ Separate the Tablet PC and the receiver.
English
■ Plug the Tablet PC and receiver into different circuits.
You may also need to contact a radio/television technician for assistance.
Unintentional Emitter per FCC Part 15
The rating label on Motion Tablet PCs, Motion FlexDock for the LE-Series,
MobileDock for the LS-Series, Motion keyboards, and all accessories show which
class (A or B) these devices fall into. Class B devices have an FCC logo (shown here)
or FCC ID on the label. Class A devices do not have an FCC ID on the label. Once you
determine the class of the device, refer to the following corresponding statement and to
the FCC notices in this Safety and Regulatory Guide.
■
■
Class A is for business or industrial environments.
Class B is for residential environments.
This device complies with Part 15 of the Federal Communications Commission (FCC)
Rules. Operation is subject to the following two conditions:
■ This device may not cause harmful interference.
■ This device must accept any interference received, including interference that may
cause undesired operation.
Class A Equipment: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the manufacturer’s instruction manual, may cause interference with radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case you will be required to correct the interference at
your own expense.
Class B Equipment: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the manufacturer’s instruction manual, may cause interference with radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
you are encouraged to try to correct the interference by one or more of the following
measures:
■ Reorient or relocate the receiving antenna
■ Increase the separation between the equipment and the receiver
10 English
■ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
■ Consult the dealer or an experienced radio/television technician
for help
The following information is provided on the device or devices covered in this document
in compliance with FCC regulations:
■ Model numbers: T001 (Motion M1200 Tablet PC), T002 (Motion M1300 Tablet
■
■
■
■
PC), T003 (Motion M1400 Tablet PC), T004 (Motion LE1600 Tablet PC), TS01
(Motion LS800 Tablet PC)
Company name: Motion Computing, Inc.
8601 RR 2222 Building II
Austin, Texas 78730
512-637-1100
Intentional Emitter per FCC Part 15
Embedded in your Tablet PC are various Radio Frequency (RF) wireless
communication devices. It may contain one or more Radio type devices that operate in
the 450-1550 KHz band, as well as devices that operate in the 2.4 or 5.4 GHz Band.
All Radio type devices embedded in your Tablet PC have met all the qualifications for
use under FCC regulations and guidelines.
This equipment complies with FCC Radio Frequency Electromagnetic Signal (RF)
exposure limits set forth for an uncontrolled environment of portable transmission.
This product has been evaluated for RF exposure at a distance of 20 cm (8 inches).
Operation at a separation distance less than 20 cm (8 inches) from the radiating
element to nearby persons will not expose nearby persons to RF levels that exceed the
FCC rules for RF exposure.
Operation of this wireless communication device is subject to the following two
conditions:
■ This device may not cause harmful interference
■ This device must accept any interference received, including interference that may
cause undesired operation.
WARNING: Do not attempt to service the wireless communication device
built into the Tablet PC yourself. Such action may void the warranty on the
Tablet PC. Contact your Motion Reseller or Motion Computing for information
about servicing your wireless communication device.
FCC CAUTION: This device was tested for Specific Absorption Rate (SAR) in a
body-worn configuration. The device was found to comply with the FCC requirements
for RF Exposure when used in the docking station, held in the hand, or placed on the
lap. Maximum measured SAR levels for the Motion Tablets were: 0.016W/kg
(M1200), 0.027W/kg (M1300), 0.312W/kg (M1400), 0.034W/kg (LE1600), and
0.965W/kg (LS800). Any changes or modification not expressly approved by the party
English
11
responsible for compliance could void the user’s authority to operate this equipment.
NOTE: The Radio Frequency (RF) emitter installed in your Tablet PC must not be
located or operated in conjunction with any other antenna or transmitter.
Modifications
The FCC requires that you be notified that any changes or modifications made to this
device that are not expressly approved by Motion Computing, Inc. may void your
authority to operate the equipment.
Cables
Connections to this Tablet PC must be made only with shielded cables. This reduces
possible interference with radio communications and complies with FCC Rules and
Regulations for this EMC classification.
Airline Travel Notice
The FAA requires that you suspend wireless operations before boarding an
airplane. These include both internal and external wireless devices. Internal
wireless connections are indicated by the wireless LED on the Tablet PC
front panel (identified by the wireless icon shown here). If the LED is ON or
blinking, the wireless connection is enabled. External wireless devices may
be installed in the PC Card slot or attached to the Tablet PC and must also be
disabled. For information about disabling these devices, see IMPORTANT
below.
IMPORTANT: To disable internal Tablet PC wireless operations, open the Motion
Dashboard by pressing Hot Key #1 and under Wireless, disable any wireless
connections (802.11 or internal Bluetooth wireless radios). When internal Tablet PC
wireless operations are disabled, the wireless LED on the Tablet PC front panel is
OFF. Also, there is a wireless on/off button on the LE- and LS-Series Tablet PC that
when pressed and held for ½ second, suspends wireless operations.
To disable external wireless devices installed in the Tablet PC PCMCIA Card slot or
attached to the Tablet PC, eject the card or unplug the external device. To disable
external devices via the software, see the instructions that came with the device or
contact the device manufacturer.
12 English
IC Notice (Canada Only)
Unintentional Emitter per ICES-003
Motion Computing Tablet PCs are classified
by the Industry Canada (IC) InterferenceCausing Equipment Standard #3 (ICES-003)
as Class B digital devices. This classification is located on the label on the bottom of
your Tablet PC. Look for a statement on the label similar to the following:
Canada ICES-003, Class/Classe B.
This Class B (or Class A, if so indicated on the registration label) digital apparatus
meets the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l’étiquette
d’enregistration) respecte toutes les exigences du Règlement sur le Matériel Brouilleur
du Canada.
Intentional Emitter per RSS 210
Embedded in your Tablet PC are various Radio Frequency (RF) wireless
communication devices. It may contain one or more Radio type devices that operate in
the 450-1550 KHz band, as well as devices that operate in the 2.4 or 5.4 GHz Band.
All Radio type devices embedded in your Tablet PC comply with RSS 210 of Industry
Canada. Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of this device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne
doit pas produire de brouillage et (2) l’utilsateur du dispositif doit éntre prét a accepter
tout brouillage radioélectrique recu, meme si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
The term “IC” before the equipment certification number only signifies that the
Industry Canada technical specifications were met.
This equipment complies with Industry Canada Radio Frequency Electromagnetic
Signal (RF) exposure limits set forth for an uncontrolled environment of portable
transmission.
English
13
Conformité Européne (CE) (European Union)
Unintentional Emitter
The (Conformité Européne) symbol found on the Tablet PC indicates
compliance to the EMC Directive and the Low Voltage Directive of the
European Union. This means that the Tablet PC meets the following
technical standards:
■ EN 55011 (CISPR 11) — Limits and Methods of Measurement of Radio
■
■
■
■
■
Interference Characteristics of Industrial, Scientific, And Medical (ISM) Radio
Frequency Equipment
EN 55022 (CISPR22) — Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
EN 55024 (IEC 61000 4-2, 4-3, 4-3, 4-5, 4-6, 4-8, 4-11) — Information Technology
Equipment-Immunity Characteristics - Limits and Methods of Measurement
EN 61000 3-2 (IEC 61000 3-2) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 2: Limitations for harmonic current emissions (Equipment input
current up to and including 16 A per phase)
EN 61000 3-3 (IEC 61000 3-3) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 3: Limitations of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current up to and including 16 A
EN60950-1 — Safety of Information Technology Equipment
Intentional Emitter
The CE mark shown here is a device ID that means the
product complies with the essential requirements of the
R&TTE Directive 1999/5/EC with essential test suites.
Embedded in your Tablet PC are various Radio Frequency (RF) wireless
communication devices. It may contain one or more Radio type devices that operate in
the 450-1550 KHz band, as well as devices that operate in the 2.4 or 5.4 GHz Band.
All Radio type devices embedded in your Tablet PC comply with standards:
EN60950-1 — Safety of Information Technology Equipment
ETS 300-328 — Electromagnetic compatibility and radio spectrum matters (ERM)
ETS 300-826 — General EMC requirements for radio equipment
ETS EN301-489 — Electromagnetic compatibility of (EMC) standard for radio
equipment and services
■ ETS EN301-893 — 5Ghz High performance of RLA; Harmonized EN covering
essential requirements of Article 3.2 of the R&TTE Directive
■
■
■
■
14 English
Belegië/Belgique
For outdoor usage only, channels 10 (2457 MHz) and 11 (2462 MHz) are allowed. For
private usage outside buildings across public grounds over less than 300 meters, no
special registration with IBPT/BIPT (Belgium Institute for Postal services and
Telecommunications) is required. Registration to IBPT/BIPT is required for private
usage outside buildings across public grounds over more than 300 meters. An IBPT/
BIPT license is required for public usage outside buildings. For registration and
license, please contact IBPT/BIPT.
Gebruik buiten gebouw alleen op kanalen 10 (2457 MHz) en 11 (2462 MHz). Voor
privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen
registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is wel
registratie bij BIPT/IBPT nodig. Voor publiek gebruik buiten gebouwen is licentie van
BIPT/IBPT verplicht. Voor registratie of licentie kunt u contact opnemen met BIPT.
L’utilisation en extérieur est autorisé sur le canal 10 (2457 MHz) et 11 (2462 MHz).
Dans le cas d’une utilization privée, à l’extérieur d’un bâtiment, audessus d’un espace
public, aucun enregistrement n’est pas nécessaire pour une distance de moins de 300m.
Pour une distance supérieure à 300m un enregistrement auprés de l’IBPT est requisé.
Pour une utilisation publique à l’extérieur de bâtiments, une licence de l’IBPT est
requise. Pour les enregistrements et licences, veuillez contacter l’IBPT.
Deutschland
A license is required for outdoor installations. Outdoor use limited to 10 mW e.i.r.p.
(milliwatts Equivalent Isotropically Radiated Power) within the band 2454-2483.5
MHz. Check with reseller for the procedure to follow.
Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungspflichtig. Im
Freiengebrauch begrezt bis 10 mW e.i.r.p. innerhalb des Bandes 2454-2483.5 MHz.
Bitte mit Händler die Vorgehensweise abstimmen.
France
Restricted frequency band: only channels 10 and 11 (2457 MHz and 2462 MHz
respectively) may be used in France. Outdoor use limited to 10 mW e.i.r.p. (milliwatts
Equivalent Isotropically Radiated Power) within the band 2454-2483.5 MHz.
A license is required for every installation, indoor and outdoor. Please contact ART
(L’Autorité de Régulation des Télécommunications) for procedure to follow.
Bande de fréquence restreinte: seuls les canaux 10 à 11 (2457 et 2462 MHz
respectivement) doivent être utilisés en France. Utilisation extérieure limitée à 10 mW
e.i.r.p dans la bande 2454-2483.5 mégahertz.
English
15
Toute utilisation, qu’elle soit intérieure ou extérieure, est soumise à autorisation. Vous
pouvez contacter L’Autorité de Régulation des Télécommunications (http://www.arttelecom.fr) pour la procédure à suivre.
Italia
A license is required for indoor use. Use with outdoor installations is not allowed.
E’necessaria la concessione ministeriale anche per l’uso interno Verificare con i
rivenditori la procedura da seguire. L’uso per installazione in esterni non e’permessa.
Nederland
A license is required for outdoor installations. Check with reseller for the procedure to
follow.
Licentie verplicht voor gebruik met buitenatennes. Neem contact op met verkoper voor
juiste procedure.
Wideband Transmission System Radio
The Wideband Transmission System Radio in your Tablet PC contains a custom
antenna that complies with the following directives:
English
Hereby, Motion Computing, Inc., declares that this Wideband
Transmission System Radio is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
German
Hiermit erklärt Motion Computing, Inc., dass sich dieser/diese/dieses
Wideband Transmission System Radio in Übereinstimmung mit den
grundlegenden Anforderungen und den anderen relevanten Vorschriften
der Richtlinie 1999/5/EG befindet.
Hiermit erklärt Motion Computing, Inc. die Übereinstimmung des
Gerätes Wideband Data Transmission System Radio mit den
grundlegenden Anforderungen und den anderen relevanten Festlegungen
der Richtlinie 1999/5/EG.
French
Par la présente Motion Computing, Inc. déclare que l'appareil Wideband
Data Transmission System Radio est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.
Par la présente, Motion Computing, Inc. déclare que ce Wideband Data
Transmission System Radio est conforme aux exigences essentielles et
aux autres dispositions de la directive 1999/5/CE qui lui sont applicables.
16 English
Statements for M-Series Only
Telecommunication Devices/Modem Approvals
The telecommunication device in Motion Tablet PCs (M-Series only) is approved for
connection to the telephone network in the countries whose approval markings are
indicated on the product label located on the Tablet PC or on an internal Tablet PC
component.
See the documentation included with the product to ensure the product is configured
for the country in which it is located. Selecting a country other than the one in which it
is located may cause the modem to be configured in a way that violates the
telecommunications regulations of that country. In addition, the modem may not
function properly if you make an incorrect country selection. When selecting a
country, if a message appears that states that the country is not supported, then the
modem has not been approved for use in this country and should not be used.
United States Modem Statement
Motion Tablet PCs contain an internal modem (M-Series only) that has been tested to
comply with FCC Standards, specifically FCC Part 68 Reg. No: 5ZXMUL-36273-FBE; AC REN:0.1B; USOC:RJ11; DOC REN:.0.0. The internal modem is located under
the rectangular Hard Disk Drive cover on the Tablet PC back panel and contains the
regulatory label.
Canadian Modem Statement
This equipment meets telecommunications network protective, operational, and safety
requirements as prescribed in the appropriate Terminal Equipment Technical
Requirements document(s). This is confirmed by marking the equipment with the
Industry Canada certification number. The Department does not guarantee that the
equipment will operate to your satisfaction.
Before installing the equipment, you should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. You should be aware
that compliance with the above conditions might not prevent degradation of service in
some situations.
Repairs to certified equipment should be coordinated by a representative designated by
the supplier. Any repairs or alterations made by you to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request you to
disconnect the equipment.
English
17
You should ensure for your own protection that the electrical ground connections of
the power utility, telephone lines, and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals allowed to be connected to a
telephone interface. The termination of an interface may consist of any combination of
devices, subject only to the requirement that the sum of the RENs of all the devices
does not exceed 5. The REN for this device is 1.
Other Notices and Marks
Battery Notice
Motion Computing sealed lithium ion batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards. This includes compliance
with the UN Recommendations on the Transport of Dangerous Goods; IATA
(International Air Transport Agency) Dangerous Goods Regulations, 44th Edition,
2003, Special Provisions A45, and applicable U.S. DOT regulations for the safe
transport of lithium ion batteries. Each Motion Computing cell or battery has been
tested under provisions of the UN Manual of Tests and Criteria, Part III, Sub-section
38.3.
Laser Safety Notice
For safety and regulatory information about third-party products that may contain
Class 1 laser equipment, see the documentation shipped with the product.
Motion CDROM and DVD/CDRW drives are Class 1 laser products. A Class 1 laser is
considered to be incapable of producing damaging radiation levels and is therefore
determined to be eye safe. These lasers are exempt from most control measures. Many
lasers in this class are lasers which are embedded in an enclosure that prohibits or
limits access to the laser radiation. However, we recommend that you do not stare into
the beam or view it directly with optical instruments.
Wireless Notices
In some environments, the use of wireless devices may be restricted. Such restrictions
may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc.
If you are uncertain of the policy that applies to the use of this device, please ask for
authorization to use it prior to turning it on. For instructions for disabling internal and
external wireless devices, see the section “Airline Travel Notice” in this guide.
18 English
Saudi Arabian Quality Mark
All Motion Tablet PCs and Motion Tablet PC systems meet the Quality Mark
standards issued by the Saudi Arabian Standards Organization (SASO) in Articles 3
and 12 in Royal Decree No. M/10 dated 1392(H) - 03-03.
Standards Applying Only to M-Series Tablet
PCs and Accessories
NOTE: To determine what regulatory and safety marks apply to a specific product,
component, or accessory, check the product label affixed to the product or its
component.
Australia Telecommunications (A-Tick) Statement
All Motion Tablet PCs and Motion Tablet PC systems meet the
Australian Communications Authority (ASA) standards found in
Schedule 3 of the Labeling Notice Radiocommunications Act of 1992
(A-Tick) for compatibility for telecommunications-customer equipment.
IMPORTANT TELECOMMUNICATIONS REGULATORY NOTICE
The user must not activate the decadic (pulse) dialing or Easycall functions of the
Tablet PC internal modem. The Tablet PC does not correctly support these functions
for Australia and New Zealand; use of these functions will void telecommunications
compliance. The Tablet PC shall be connected to the Telecommunications Network
through a line cord that meets the requirements of ASA TS008.
New Zealand Telecommunications (C-Tick)
Statement
All Motion Tablet PCs and Motion Tablet PC systems comply with the
New Zealand Telecommunications Authority (NZTA) PTC200
specification for the internal modem. The permit number issued for this
compliance appears on the regulatory label on the product.
IMPORTANT TELECOMMUNICATIONS REGULATORY NOTICE
The user must not activate the decadic (pulse) dialing or Easycall functions of the
Tablet PC internal modem. The Tablet PC does not correctly support these functions
for Australia and New Zealand; use of these functions will void telecommunications
compliance. The Tablet PC shall be connected to the Telecommunications Network
through a line cord that meets the requirements of ASA TS008.
English
19
Standards Applying Only to Motion M1400,
LE1600, and LS800 Tablet PCs
Internal Bluetooth Module Notice
Class B Equipment: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the manufacturer’s instruction manual, may cause interference with radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
you are encouraged to try to correct the interference by one or more of the following
measures:
■ Reorient or relocate the receiving antenna
■ Increase the separation between the equipment and the receiver
■ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
■ Consult the dealer or an experienced radio/television technician
for help.
This device complies with Part 15 of the Federal Communications Commission (FCC)
Rules. Operation is subject to the following two conditions:
■ This device may not cause harmful interference.
■ This device must accept any interference received, including interference that may
cause undesired operation.
FCC CAUTION: Any changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
FCC Radiation Exposure Statement:
ƒ
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
ƒ
The following statement applies only to the Motion LE1600 and the Motion
LS800 Tablet PC: This equipment also complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph
(d)(2), which addresses RF Exposure from radio frequency devices. Operation is
within 5.15GHz ~ 5.25GHz frequency range. This frequency range may limit or
restrict the effective use of this equipment to an indoor environment. This
radiated output power is far below the FCC RF exposure limits. Nevertheless, this
device should be used in such a manner that the potential for human contact
20 English
during normal operation is minimized. This equipment contains an internal
antenna transmitter whose effective use may be affected if it is co-located or
operating in conjunction with any other antenna or transmitter.
English
21
Copyright Motion Computing Incorporated, April 2006. All rights reserved.
P/N 024-02-0040 Rev. A07
Motion Computing is a registered trademark and the Motion logo is a trademark
of Motion Computing, Inc. All other trademarks and registered trademarks are the
property of their respective owners.
Copyright Motion Computing Incorporated, avril 2006. Tous droits réservés.
P/N 024-02-0040 Rév. A07
Motion Computing est une marque déposée et le logo Motion est une marque
commerciale de Motion Computing, Inc. Toutes les autres marques commerciales
et marques déposées sont la propriété de leur détenteur respectif.
Copyright Motion Computing Incorporated, April 2006. Alle Rechte vorbehalten.
P/N 024-02-0040 Rev. A07
Motion Computing ist ein eingetragenes Warenzeichen und das Motion-Logo ist
ein Warenzeichen von Motion Computing, Inc. Alle anderen Warenzeichen und
eingetragenen Warenzeichen sind Eigentum ihrer jeweiligen Inhaber.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 26
Page Layout                     : OneColumn
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:756f804d-bcce-4892-9178-5a05b88cd786
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Tag Email Subject               : Translation request: Safety and Regulatory Guide
Tag Author Email Display Name   : Larry Begnaud
Tag Author Email                : lbegnaud@motioncomputing.com
Tag Previous Ad Hoc Review Cycle ID: -160788176
Tag Ad Hoc Review Cycle ID      : 1590328158
Source Modified                 : D:20060315162817
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2006:05:25 14:40:08-05:00
Create Date                     : 2006:03:15 10:35-06:00
Metadata Date                   : 2006:05:25 14:40:08-05:00
Document ID                     : uuid:ed4ad1da-1f85-4e49-b146-6b9f7a17a456
Instance ID                     : uuid:970da025-37ae-4c8c-baa6-a1d83dd5dac6
Version ID                      : 3
Format                          : application/pdf
Title                           : 
Creator                         : Your User Name
Subject                         : 
Tagged PDF                      : Yes
Author                          : Your User Name

EXIF Metadata provided by EXIF.tools