Xplore Technologies EM75 Single Modular User Manual

Xplore Technologies Corp. Single Modular Users Manual

Users Manual

XPAD L10 and XSLATE L10 Tablet PC’s
Model iX101L1 and iX101L2
Important Product Information
Safety and Regulatory Compliance
Limited Warranty
1
Contents
Symbol description ............................................................................................................................... 4
Specifications ........................................................................................................................................ 5
Product safety information ................................................................................................................... 5
Mounting and installation disclaimer ................................................................................................... 5
Setup precautions ................................................................................................................................. 5
Basic personal safety precautions ...................................................................................................... 6
Tablet PC precautions .......................................................................................................................... 7
High risk and dangerous activity warning ........................................................................................... 7
Tablet PC disposal ............................................................................................................................... 7
Cabling and power cord precautions............................................................................................... 7
Battery pack disposal ........................................................................................................................... 8
Travel precautions ................................................................................................................................ 8
Component replacement precautions ................................................................................................. 8
Sound pressure/volume notice ............................................................................................................ 9
Wireless devices ................................................................................................................................... 9
Comfort and health ............................................................................................................................... 9
Environmental statements ................................................................................................................... 9
Power adapter precautions ................................................................................................................ 10
Li-ion battery pack notice ................................................................................................................... 11
Battery pack warnings and precautions ............................................................................................ 11
Regulatory and safety compliance ................................................................................................ 12
Federal Communications Commission notice (USA) ................................................. 12
Unintentional Emitter per FCC Part 15...................................................................................... 12
The Tablet PC meets the following technical standards: ........................................................ 13
Intentional Emitter per FCC Part 15 .......................................................................................... 14
Internal Bluetooth module notice ................................................................................................... 14
FCC Radiation Exposure Statement ............................................................................................. 15
Medical Equipment Safety ............................................................................................................. 17
Safety and hazards ......................................................................................................................... 20
Modifications ................................................................................................................................... 21
Cables .............................................................................................................................................. 21
2
Airline travel notice ......................................................................................................................... 21
Disabling internal wireless operations ....................................................................................... 21
IC notice (Canada only) ..................................................................................................................... 21
Unintentional Emitter per ICES-003 Class B ................................................................................ 21
Intentional Emitter per RSS 210 .................................................................................................... 22
Conformité Européne (CE) European Union.................................................................. 23
Unintentional Emitter ...................................................................................................................... 23
CE Intentional Emitter ..................................................................................................... 23
Radio Frequency exposure statement .............................................................................................. 25
Wideband Transmission System radio ............................................................................................. 25
Wireless notices .................................................................................................................................. 27
Australia/New Zealand (C-Tick) statements ...................................................................... 27
Internal Bluetooth Module Notice Class B Statement .................................................................. 27
Australia/New Zealand (A-Tick) statement...................................................................... 28
Radio Frequency Wireless Communication Devices ............................................................... 28
NOM/NYCE statement ......................................................................................... 28
Internal Bluetooth Module Notice Class B Statement .................................................................. 29
Radio Frequency Wireless Communication Devices ................................................................... 29
IRAM statement ...................................................................................................... 29
Internal Bluetooth notice................................................................................................................. 30
Radio Frequency Wireless Communication Devices ................................................................... 30
ANATEL statement ........................................................................... 31
Internal Bluetooth Class B notice .................................................................................................. 31
Radio Frequency Wireless Communication Devices ................................................................... 31
Battery notice ...................................................................................................................................... 32
3
Trademarks ......................................................................................................................................... 32
Limited Warranty ................................................................................................................................. 32
Warranty disclaimer ............................................................................................................................ 33
Warranty period .................................................................................................................................. 33
Warranty coverage ............................................................................................................................. 33
Repair or replacement ........................................................................................................................ 34
Software and data............................................................................................................................... 34
Warranty exclusions ........................................................................................................................... 34
Limitation of liability ............................................................................................................................ 35
Software technical support................................................................................................................. 35
Warranty transfer to another country ................................................................................................ 35
Australia ............................................................................................................................................... 36
Warranty period............................................................................................................................... 36
Warranty coverage ......................................................................................................................... 37
Repair or replacement .................................................................................................................... 37
Software and data ........................................................................................................................... 38
Warranty exclusions ....................................................................................................................... 38
Limitation of liability ......................................................................................................................... 39
Software Technical Support ........................................................................................................... 39
What you need to do to be entitled to claim under this Limited Warranty:................................. 39
How to make a claim under this Limited Warranty: ..................................................................... 39
4
This document contains regulatory, precautionary, and recycling information for the Xplore
iX101L1 and iX101L2 Tablet PC. To avoid injury, read this document and understand its
contents before you use the Tablet PC. Keep this document nearby, so you can refer to it later.
For detailed operating instructions and safety information, see
https://support.xploretech.com/us/support/userdocs/
The Xplore Tablet PC Model iX101L1 and iX101L2 is marketed and/or known as the XSLATE
L10 and XPADL10.
Symbol description
The following symbols may appear on the products or accessories.
Federal Communications Commission
Compliance with Nemko CCL for general product safety in
accordance with UL 60950-1 (ITE) and CAN/CSA C22.2
No. 60950-1 (ITE)
Canada Interference-Causing Equipment Standard #3 Class B
devices
Compliance with RED Directive 2014/53/EU for radio frequency
devices
Conformité Européne; compliance to EMC and Low Voltage
Directives of the European Union
Product complies with 2012/19/EU
Compliance with the Independent Communications Authority of
South Africa
Compliance with Australian and New Zealand EMC, EMR,
Radio communication, and Telecommunication Standards (A-
Tick symbol)
Compliance with the Korea Certification Commission for EMC,
Safety, and Telecommunications
Infocomm Development Authority for Singapore
Normalizacion Y Certification Electronica A.C. (NYCE)
5
Instituto Argentino de Normalización y Certificación (IRAM)
Agência Nacional de Telecomunicações (ANATEL)
Specifications
On
Off
Temperature
-10 °C to 55 °C / 14 °F to 131
°F
-30 °C to 70 °C / -22 °F to
158 °F
Humidity
Air pressure
697–1060 hPa
187–1060 hPa
Power supply (ITE) Delta
Electronics, SADP-65WH
Rev. BB
Product safety information
Xplore Tablet PCs are designed to optimize safety, minimize strain, and withstand the rigors of
portability. However, to further reduce the risk of injury or damage to the unit, you should
observe certain precautions.
Mounting and installation disclaimer
Xplore Technologies shall not be liable under any theory of liability (including, without limitation,
contract, tort, or statutory law) for any loss, damage, personal injury, or other damage of any
nature (including, without limitation, direct, special, incidental, or consequential damages)
arising directly or indirectly as a result of improper or inappropriate placement, installation, or
use of its products or any other application. To safely install and use Xplore products, full
consideration of occupants, systems (e.g., the location of fuel lines, navigation systems, brakes
lines, electrical, drive train or other systems), air-bags and other back-up, warning, or safety
equipment is required. Without limiting the foregoing, Xplore specifically disclaims any
responsibility for the placement, use, or installation of its products not consistent with (i) the
original manufacturer’s or governmental or regulatory specifications and recommendations for
the environment where the products will be placed, used, or installed, (ii) Xplore written product
instruction sheets, or (iii) workmanship standards.
Setup precautions
Review the following setup precautions:
6
• Read the installation instructions before connecting the Tablet PC to the power supply.
• If you put the Tablet PC in a docking station, place it on a level surface so it does not fall
over and damage the unit, the docking station, or other components.
• When you move the Tablet PC between environments with very different humidity and/or
temperature ranges, allow sufficient time to adjust to the new humidity or temperature.
• Do not drop the Tablet PC or subject it to other mechanical shocks as this can cause
cosmetic imperfections and/or system malfunctions.
• Do not apply heavy pressure to the Tablet PC or subject it to strong impact. Excessive
pressure or impact can cause damage to Tablet PC components or otherwise cause
malfunctions.
• Do not use the Tablet PC AC adapter for other equipment. This can generate heat or
fire. In addition, do not use other AC adapters with the Tablet PC.
• When using the Tablet PC for long periods of time, rest your eyes for approximately 10
to 15 minutes every hour. Failing to rest your eyes can cause eye strain and other
deterioration of eye health.
Basic personal safety precautions
Review the following personal safety precautions:
• Do not attempt to service the Tablet PC or its components yourself. Perform only those
service procedures for which Xplore provides special instructions, for example, hot-
swapping a battery or installing a peripheral device.
• Turn off the Tablet PC completely to clean it, its components, or chassis, or perform
operations requiring similar steps. To do this, turn off the power switch, then disconnect
the AC adapter from the electrical outlet.
• Do not operate the Tablet PC near water, such as near a bathtub, kitchen sink or laundry
tub, in a wet basement, by a swimming pool, or in the rain while plugged into an
electrical outlet. The cases, portfolios, and other accessories currently offered by Xplore
are not designed to be water-resistant or watertight. Do not submerse the tablet in water
or other fluids.
• Do not connect or disconnect any cables or perform maintenance or reconfiguration of
this product during an electrical storm.
• Avoid using the wireless modem, wireless LAN, or wired LAN during an electrical storm,
because there is a remote risk of electric shock from lightning.
• Do not push foreign objects into air vents or other openings of the Tablet PC or
accessories, such as the optional external optical disk drive bays. Doing so can short out
interior components and may cause fire or electric shock.
• If the Xplore battery pack leaks and the fluid gets in your eyes, do not rub them. Instead,
rinse your eyes with clean running water and immediately seek medical attention.
Otherwise, eye injury may result.
• If leakage from the battery pack comes in contact with your skin or clothing, immediately
wash it away with running water. Otherwise, skin inflammation can occur. Do not operate
the Tablet PC or power adapter for extended periods of time with the base resting
directly on exposed skin. The surface temperature can rise during normal operation,
particularly when AC power is used. Sustained contact with exposed skin can cause
discomfort or burns.
7
Tablet PC precautions
Review the following Tablet PC precautions:
• Certain environments may contain particles or debris that can adhere to the Tablet PC
display or to the Tablet PC pen tip. To avoid damaging the display, clean it frequently
with the cleaning cloth offered by Xplore or with a soft cloth. Apply window-type cleaner
or water to the cloth, and then clean the tablet with the cloth. For a list of approved
cleaning solutions, see https://www.xploretech.com/us/motion-L10/specs/
• Change pen tips regularly, especially if you work in an environment that contains
particles or debris. Dropping the pen onto a rough surface may damage the pen tip or
embed particles in it that can damage the Tablet PC display. For instructions about
changing the pen tips, see the User’s Guide at
https://support.xploretech.com/us/support/userdocs/
• Store the pen in the pen bay of the Tablet PC. Carrying it in a pocket, toolbox, or similar
receptacle that contains particles or debris may damage the pen tip or embed particles
in it that can damage the Tablet PC display.
• For audio sound pressure statements, see page 9.
High risk and dangerous activity warning
This computer system is not intended to be used as a medical device or for use in high-risk or
dangerous activities, including without limitation, the operation of nuclear facilities, aircraft
navigation or communications systems, hospital or medical operations, air traffic control
machines, treating, diagnosing, or monitoring patients, or for any other uses where the failure of
the computer system could lead to death, personal injury, or severe environmental damage.
Tablet PC disposal
Review the following precautions:
• Do not dispose of the Tablet PC with general waste.
• If you cannot locate a disposal site, contact your reseller or Xplore Technologies for
assistance in locating a disposal site near your locale.
Cabling and power cord precautions
Review the following cabling and power cord precautions:
• Power cord sets for use in other countries must meet the requirements of that country.
Use the appropriate AC adapter and power cord for your locale. For information about
power cord set requirements, contact the Xplore Reseller from whom you purchased the
product, or contact Xplore Technologies if you purchased the product from Xplore
Technologies.
• If no power cord was provided for your Tablet PC or an accessory, purchase a power
cord that is approved for use in your country and that matches the required voltage and
amperage rating.
8
• If you use an extension cord with your AC adapter, ensure that the total ampere rating of
the products plugged into the extension cord does not exceed the ampere rating of the
extension cord.
• When using your power cord, make sure to position it around objects so it will not be cut
or punctured.
Battery pack disposal
Review the following battery pack disposal precautions:
• Dispose of the lithium ion battery packs only at approved disposal sites. To locate an
appropriate site, contact the solid waste disposal officials where you live or look for a
rechargeable battery recycling Web site that lists disposal locations near you.
• Do not dispose of battery packs in a fire, throw them in a trash receptacle, put them in a
recycling bin not intended for their disposal, or otherwise discard them in a manner that
may result in there being hazardous to the environment.
Travel precautions
Review the following travel precautions:
• When traveling, do not store the Tablet PC in an overhead compartment or other area
where it could slide around, and do not check it in your baggage.
• Do not put the Tablet PC through a metal detector. You can safely put it through an X-
ray security machine without harming any components.
• Be sure to charge the battery before you hand-check the Tablet PC. You may be asked
to turn the Tablet PC on at a baggage checkpoint.
• Ensure that your Tablet PC is configured for air travel before you board the airplane.
Component replacement precautions
Review the following component replacement precautions:
• Use only components sold by Xplore Technologies with your Tablet PC. Installation or
use of non-Xplore components may damage the Tablet PC and/or its components and
void the warranty.
• Components currently available from Xplore Technologies as user replaceable parts
include an AC power adapter (rated for general use) and battery pack. These
components may change from time to time. Contact Xplore Technologies for more
information or if you have questions about replacing a specific component.
• Do not replace or attempt to service internal Tablet PC components such as the hard
disk drive, Bluetooth card, internal antennas, memory modules, or wireless module
components. Such actions can damage the Tablet PC and/or its components and void
the warranty.
9
Sound pressure/volume notice
Excessive sound pressure from earphones or headphones can cause hearing damage and
hearing loss. Adjustments of the volume control or equalizer to settings other than the default
setting can increase earphone and headphone output voltage and therefore increase the
volume and sound pressure levels to levels above the healthy range.
Wireless devices
Although Xplore sells and may recommend certain wireless Mini PCI-Express devices for the
Tablet PC, these should only be installed by Xplore or a qualified Xplore repair facility. If you
choose to install non-approved wireless devices yourself, you may damage the equipment
and/or its internal components and void the warranty. Contact Xplore Technologies or your
authorized Xplore reseller for information about recommended repair facilities and locations
near you.
Comfort and health
HEALTH WARNING: Using a keyboard or pointing device may be linked to serious injuries or
disorders. For more information, visit the Mayo Clinic™ Web site at www.mayoclinic.com.
You can help prevent occasional discomfort in your hands, arms, shoulders, neck, and other
parts of your body by:
• Taking frequent breaks to stretch and change your working position.
• Resting your hands and wrists frequently so they have time to recover from repetitive
movements. Use a wrist pad.
• Using the touch pad on a keyboard or the Tablet PC pen, which change the way you use
your hands and wrists, and can provide a break from the keyboard and mouse.
If symptoms persist or continue to occur and include pain, throbbing, aching, tingling,
numbness, burning sensations, or stiffness, DO NOT IGNORE THESE WARNING SIGNS.
PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL.
Environmental statements
Review the following environmental statements:
• The extraction and use of natural resources are required in the production of the
equipment you purchased. The equipment may contain hazardous substances that
could impact health and the environment if not disposed of using environmental disposal
systems available in your region.
• To prevent the dissemination of those substances in our environment and to diminish the
impact on the natural resources, we encourage you to use appropriate take-back
environmental disposal systems. Those disposal systems will reuse or recycle most of
the materials of your end-life equipment in compliance with current environmental
conventions.
• The crossed-out wheeled bin symbol prompts you to use those environmental disposal
systems.
10
• If you need more information about collection, disposal, reuse, and recycling systems,
please contact your local or regional waste administration.
• This product follows Directive 2011/65/EC of the European Parliament and of the
Council set into force in June 2011. This Directive set into force procedures regarding
the restriction of the use of certain substances in electric and electrical equipment
(ROHS).
• This product follows Directive 2012/19/EC of the European Parliament and of the
Council set into force in July 2012. This Directive set into force procedures regarding the
Waste of Electrical and Electronic Equipment (WEEE). Xplore Technologies
Incorporated is a participant in the “Take Back” program established in the WEEE
Directive and assumes full responsibility for the disposal take back of its products.
• This product follows Directive 2009/12/EC of the European Parliament and of the
Council set into force on November 2009. This Directive established the framework for
setting the eco-design requirements for energy-using products and amending Council
Directives 92/42/EEC, 96/57/EC, 2000/55/EC, and 2005/32/EC of the European
Parliament and of the Council.
• This product follows Commission Regulation (EC) No. 278/2009. The Regulation set
forth procedures for implementing Directive 2005/32/EC of the European Parliament and
of the Council regarding eco-design requirements for “No-Load” condition electric power
consumption and average active efficiency of external power supplies. The Xplore power
supply meets the requirements and guidelines of the Commission Regulation (EC) No.
278/2009.
• Xplore Technologies Incorporated ensures that this product does not contain any
substances proposed for inclusion to be listed in the Substances of Very High Concern
(SVHC) “Candidate List” (Art. 59.1 of Regulation No. 1907/2006 updated June 18, 2010)
in an individual concentration of greater than or equal to 0.1% by weight.
• Also, you can contact Xplore Technologies, Inc. for more information about the
environmental processes for our products.
Power adapter precautions
• Use only the AC adapter and power cord approved for this Tablet PC or Tablet PC
accessory. Use of another type of AC adapter may risk fire or explosion.
• Place the AC adapter in a ventilated area, such as on a desktop or the floor, when you
use it to run the Tablet PC or to charge the battery. Do not cover the AC adapter with
papers or other items that will reduce cooling; also, do not use the AC adapter while it is
inside a carrying case.
• Ensure that nothing rests on the AC adapter’s power cable and that the cable is not
located where it can be tripped over or stepped on.
• Ensure that the outlet is near the equipment and is easily accessible.
• Disconnect power cords and cables by grasping the connector, not by pulling on the
cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any
connector pins. Before you connect a cable, make sure both connectors are correctly
aligned
11
Li-ion battery pack notice
• Xplore Technologies sealed lithium ion batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards.
• This includes compliance with all the UN Recommendations on the Transport of
Dangerous Goods; IATA (International Air Transport Agency) Dangerous Goods
Regulations, 44th Edition, 2003, Special Provisions A45, and applicable U.S. DOT
regulations for the safe transport of lithium ion batteries.
• Each Xplore Technologies cell or battery has been tested under provisions of the UN
Manual of Tests and Criteria, Part III, Sub-section 38.3.
• Xplore Technologies product packaging containing Li-ion battery packs are labeled in
accordance with the updated National Transportation Safety Board (NTSB); Pipeline
Hazardous Material Safety Administration (PHMSA); International Air Transport Agency
(IATA); and the International Civil Aviation Organization (ICAO) rules outlined within the
Technical Instruction document references:
1. Technical Instructions for the Safe Transport of Dangerous Goods by Air (Doc 9284).
2. Emergency Response Guidance for Aircraft Incidents Involving Dangerous Goods (Doc
9481).
Battery pack warnings and precautions
• The Tablet PC contains an internal lithium ion (Li-ion) battery pack. Replace the internal
battery pack only with a Xplore battery or a Xplore-recommended equivalent to avoid the
risk of fire or explosion resulting in personal injury.
• Do not use the battery pack in combination with other types of battery packs (such as
dry-cell battery packs), except for a L10 additional battery available from Xplore
Technologies, or battery packs with different capacities or brands. This can result in it
being over-discharged during use or overcharged during recharging, possibly causing it
to leak, overheat, emit smoke, burst, and/or ignite.
• Do not dispose of batteries in a fire. They may explode. Dispose of used batteries
according to the manufacturer’s instructions. The label on the battery lists the
manufacturer’s name. See the section Page 9 for more information about battery
disposal.
• Do not use or leave the battery pack near a heat source. Heat can melt the insulation
and damage other safety features, possibly causing it to leak, overheat, emit smoke,
burst, and/or ignite.
• Do not immerse the battery pack in water or allow it to get wet. Its protective features
can be damaged; it can be charged with extremely high current and voltage, and
abnormal chemical reactions may occur, possibly causing it to leak, overheat, emit
smoke, burst, and/or ignite.
• Do not disassemble or modify the battery pack. If disassembled, the battery pack can
leak, overheat, emit smoke, burst, and/or ignite.
• Do not connect the positive (+) and negative (-) terminals with a metal object such as
wire. Short-circuiting may occur causing the battery pack to leak, overheat, emit smoke,
burst, and/or ignite.
• Do not pierce the battery pack with a sharp object, strike it with a hammer, step on it, or
throw it. These actions can damage or deform it, internal short-circuiting can occur,
possibly causing it to leak, overheat, emit smoke, burst, and/or ignite.
12
• Do not use an apparently deformed or damaged battery pack, which may leak, overheat,
emit smoke, burst, and/or ignite.
• Do not directly solder the battery pack. Heat can melt the insulation and damage other
safety features, possibly causing it to leak, overheat, emit smoke, burst, and/or ignite.
• Store the battery pack in a location where children cannot reach it. Make sure children
do not remove the battery pack from the Tablet PC or charger.
• If the battery pack leaks, gives off a bad odor, generates heat, becomes discolored or
deformed, or in any way appears abnormal during use, recharging or storage,
immediately remove it from the Tablet PC or charger and stop using it. If this is
discovered when you first use the battery, return it to your Xplore reseller or to Xplore
Technologies, if you bought it directly from Xplore.
• Do not transport the lithium ion batteries used in your Tablet PC in checked baggage.
You may take up to two spare batteries in carry-on baggage in addition to the one in
your Tablet PC. Transporting batteries in checked baggage or transporting more than
two spare batteries in carry-on baggage violates transportation law. Remember to
remove batteries from the battery charger before transporting it in carry-on or checked
baggage.
Regulatory and safety compliance
The following sections describe regulatory and safety compliance by country and by region.
Note: To determine which regulatory and safety marks apply to a specific product, component,
or accessory, check the product label affixed to the product and/or its components.
Federal Communications Commission notice (USA)
Electromagnetic Interference (EMI) is any electromagnetic disturbance that interrupts, obstructs,
or otherwise degrades or limits the effective performance of electronics or electrical equipment.
These emissions can potentially disrupt, degrade, or otherwise interfere with authorized
electronic emissions, which may include television, AM/FM broadcasts, cellular services, radar,
air-traffic control, and pagers.
The FCC Rules and Regulations have established Radio Frequency (RF) emission limits to
provide an interference-free RF spectrum. Many electronic devices, including computers,
generate RF energy incidental to their intended function and are, therefore, covered by these
rules.
Unintentional Emitter per FCC Part 15
The rating label on Xplore Tablet PCs, docking stations, and all accessories show which class
(A or B) these devices fall into. Class B devices have an FCC logo (shown here) or FCC ID on
the label. Class A devices do not have an FCC ID on the label. Once you determine the class of
the device, refer to the following corresponding statement and to the FCC notices in this Safety
and Regulatory Guide.
• Class A is a digital device that is marketed for use in a commercial, industrial, or
business environment, exclusive of a device that is marketed for use by the general
public or is intended to be used in the home.
• Class B is a digital device that is marketed for use in a residential environment
notwithstanding use in commercial, business, and industrial environments. Examples of
13
such devices include, but are not limited to, personal computers, calculators, and similar
electronic devices that are marketed for use by the general public.
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
Class B Equipment: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause interference with radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference with one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/television technician for help.
The following information is provided on the device or devices covered in this document in
compliance with FCC regulations:
Xplore Tablet PC model number: iX101L1 and iX101L2
Company name: Xplore Technologies, Corp.
8601 Ranch Rd. 2222
Building 2
Austin, Texas 78730Telephone: 512-637-1100
Fax: 512-637-1199
Manufacturer name:
Pegatron Corporation
No. 76, Ligong Street
Beitou, Taipei 112, Taiwan
Telephone: (866) 281439001
Fax: (866) 281437915
The Tablet PC meets the following technical standards:
• FCC Part 15 B Class B (Unintentional)
• FCC Part 15C (Intentional)
• FCC Part 15E (UNII)
• FCC Part 22 (WWAN)
14
• FCC Part 24 (WWAN)
• FCC Part 27 (WCS)
• OET 65 Supplement C (SAR)
• UL 60950-1 (Safety)
Intentional Emitter per FCC Part 15
Embedded in your Tablet PC are various Radio Frequency (RF) wireless communication
devices. It may contain one or more radio-type devices that operate in the following bands:
• 525–600 KHz band
• 13.57 MHz (SlateMate RFID)
• 704–716 MHz band
• 777–787 MHz band
• 824–849 MHz band
• 1710–1755 MHz band
• 1850–1915 MHz band
• 2400–2496 MHz band
• 5150–5850 MHz band
All radio-type devices embedded in your Tablet PC have met all the qualifications for use under
FCC regulations and guidelines.
Internal Bluetooth module notice
Class B Equipment: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause interference with radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference with one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or a radio/television technician for help.
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
FCC CAUTION: Any changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
15
WARNING: Do not attempt to service the wireless communication device built into the Tablet
PC yourself. Such action may void the warranty on the Tablet PC. Contact your Xplore Reseller
or Xplore Technologies for information about servicing your wireless communication device.
Note: The Radio Frequency (RF) emitter installed in your Tablet PC must not be located or
operated in conjunction with any other antenna or transmitter. The 802.11 (WLAN) and 3G/4G
mobile broadband (WWAN) transmitters cannot function or transmit at the same time. Before
selecting the radio (WLAN or WWAN) to be used, the user must disable the radio that will not be
used. In addition, the 3G/4G mobile broadband (WWAN) Xplore Connection Manager will alert
the operator to disable WLAN functionality before allowing connection to the 3G/4G network.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
• The FCC requires indoor use for the 5.15–5.25 GHz band to reduce the potential for
harmful interference to co-channel Mobile Satellite Systems. Therefore, it will only
transmit on the 5.25–5.35 GHz, 5.47–5.725 GHz and 5.725–5.850 GHz band when
associated with an access point (AP).
FCC CAUTION: This device was tested for SAR (Specific Absorption Rate) in a body-worn and
portable configuration. The device was found to comply with the FCC requirements for RF
exposure when used in the docking station, held in the hand, or placed on the lap when tested
with a separation distance of 0mm.
Internal radio(s) may have an individual FCC Identifier that does not apply to this configuration.
Only the FCC ID (Identifier) shown on the label(s) located inside the battery bay of the L10
(Model: iX101L1 and iX101L2) Tablet PC is applicable to this internal radio configuration. The
L10 (Model: iX101L1 and iX101L2) Tablet PC must not be co-located or operating in
conjunction with any other antenna or transmitter than specified in the certification of the FCC
Identifier(s) shown on the label.
Antenna/Radio information
Frequency
2.4GHz
5.15-
5.25GHz
5.25-
5.35GHz
5.47-
5.65GHz
5.65-
5.725GHz
Bandwidth (MHz)
20/40
20/40/80
20/40/80
20/40/80
20/40/80
Modulation
CCK/OFDM
OFDM
OFDM
OFDM
OFDM
Max Output Power
(dBm)
23.86
17.28
18.17
18.42
18.80
Frequency
5.725-
5.85GHz
699-716MHz
777-787MHz
814-849MHz
1710-
1755MHz
16
Bandwidth (MHz)
20/40/80
1.4/3/5/10
5/10
1.4/3/5/10/15
1.4/3/5/10/15
/20
Modulation
OFDM
OFDM
OFDM
OFDM
OFDM
Max Output Power
(dBm)
22.97
24.48
24.48
24.48
26.31
Frequency
1850-1915MHz
2305-
2315MHz
Bandwidth (MHz)
1.4/3/5/10/15
5/10
Modulation
OFDM
OFDM
Max Output Power
(dBm)
26.31
23.21
17
Medical Equipment Safety
• This portable equipment and mobile RF communications equipment can affect medical
electrical equipment.
• This medical electrical equipment needs special precautions regarding EMC and needs
to be installed and put into service per the EMC information provided in the
accompanying documents.
• This ME equipment or ME system should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, the ME equipment or ME
system should be observed to verify normal operation in the configuration in which it will
be used.
The use of accessories, transducers, and cables other than those specified, except for
transducers and cables sold by the manufacturer of the equipment or system as replacement
parts for internal components, may result in increased emissions or decreased immunity of the
ME equipment or ME system.
Table 1-1: Guidance and manufacturer’s declaration – electromagnetic emissions – for all ME equipment and ME
Guidance and manufacturer’s declaration – electromagnetic emissions
The XSlate L10 and XPad L10 Rugged Tablet PC is intended for use in the electromagnetic environment specified below. The customer or the
user of the XSlate L10 Rugged Tablet PC should assure that it is used in such an environment.
18
Emissions test
Compliance
Electromagnetic environment – guidance
RF emissions (CISPR 11)
Group 1
The XSlate L10 Rugged Tablet PC uses RF energy only for its internal function. Therefore,
its RF emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
The XSlate L10 Rugged Tablet PC is suitable for use in all establishments, including
domestic establishments and those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic purposes.
RF emissions (CISPR 11)
Class B
Harmonic emissions (IEC 61000-
3-2)
Class A
Voltage fluctuations/ flicker
emissions (IEC 61000-3-3)
Complies
Notes:
None
Table 1-2: Guidance and manufacturer’s declaration – electromagnetic immunity – For all ME equipment and ME systems
The XSlate L10 and XPad L10 Rugged Tablet PC is intended for use in the electromagnetic environment specified below. The customer or the
user of the XSlate L10 and Xpad L10 Rugged Tablet PC should assure that it is used in such an environment.
Immunity test
Test level
Compliance level
Electromagnetic environment – guidance
Electrostatic discharge
(ESD) (IEC 61000-4-2)
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Floors should be wood, concrete or ceramic tile. If
floors are covered with synthetic material, the
relative humidity should be at least 30 %.
Electrical fast
transient/burst (IEC 61000-
4-4)
±2 kV for power supply lines
±1 kV for input/output lines
±2 kV for power supply lines
±1 kV for input/output lines
Mains power quality should be that of a typical
commercial or hospital environment.
Surge (IEC 61000-4-5)
±1 kV differential mode
±2 kV common mode
±1 kV differential mode
±2 kV common mode
Mains power quality should be that of a typical
commercial or hospital environment.
Voltage dips, short
interruptions and voltage
variations on power supply
input lines (IEC 61000-4-
11)
<5 % UT
(>95 % dip in UT) for 0,5 cycle
40 % UT
(60 % dip in UT) for 5 cycles
70 % UT
(30 % dip in UT) for 25 cycles
<5 % UT
(>95 % dip in UT) for 5 sec
<5 % UT
(>95 % dip in UT) for 0,5 cycle
40 % UT
(60 % dip in UT) for 5 cycles
70 % UT
(30 % dip in UT) for 25 cycles
<5 % UT
(>95 % dip in UT) for 5 sec
Mains power quality should be that of a typical
commercial or hospital environment. If the user of
the XSlate L10 Rugged Tablet PC requires continued
operation during power mains interruptions, it is
recommended that the XSlate L10 Rugged Tablet PC
be powered from an uninterruptible power supply or
a battery.
NOTE: UT is the a.c. mains voltage prior to application
of the test level.
Power frequency (
50/60 Hz) magnetic field
(IEC 61000-4-8)
3 A/m
3 A/m
Power frequency magnetic fields should be at levels
characteristic of a typical location in a typical
commercial or hospital environment.
Notes:
None
19
Table 0-3: Guidance and manufacturer’s declaration – electromagnetic immunity – for ME equipment and ME systems that are
not Life-Supporting
The XSlate L10 Rugged Tablet PC is intended for use in the electromagnetic environment specified
below. The customer or the user of the XSlate L10 Rugged Tablet PC should assure that it is used in
such an environment.
Immunity test
Test level
Compliance level
Electromagnetic environment – guidance
Portable and mobile RF communications equipment should be
used no closer to any part of the XSlate L10 Rugged Tablet PC
including cables, than the recommended separation distance
calculated from the equation applicable to the frequency of the
transmitter.
Recommended separation distance
Conducted RF
(IEC 61000-4-6)
3 Vrms
150 kHz to 80 MHz
3 Vrms
150 kHz to 80 MHz
𝑑 = [3.5
𝑉1]√𝑃
Radiated RF
(IEC 61000-4-3)
3 V/m
80 MHz to 2.5 GHz
3 V/m
80 MHz to 2.5 GHz
𝑑 = [3.5
𝐸1]√𝑃 80 𝑀𝐻𝑧 𝑡𝑜 800 𝑀𝐻𝑧
𝑑 = [7
𝐸1]√𝑃 800 𝑀𝐻𝑧 𝑡𝑜 2.5 𝐺𝐻𝑧
where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer and d is
the recommended separation distance in metres (m).
Field strengths from fixed RF transmitters, as determined by an
electromagnetic site survey, (a) should be less than the
compliance level in each frequency range. (b)
Interference may occur in the vicinity of equipment marked with
the following symbol:
Notes:
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
(a) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically
with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site
survey should be considered. If the measured field strength in the location in which the XSlate L10 Rugged
Tablet PC is used exceeds the applicable RF compliance level above, the XSlate L10 Rugged Tablet PC should be
observed to verify normal operation. If abnormal performance is observed, additional measures may be
necessary, such as reorienting or relocating the XSlate L10 Rugged Tablet PC.
(b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
20
Table 1-4: Recommended separation distances between portable and mobile RF communications equipment and the ME
equipment or ME system – for ME equipment and ME systems that are not life-supporting
The XSlate L10 Rugged Tablet PC is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the XSlate L10 Rugged Tablet PC
can help prevent electromagnetic interference by maintaining a minimum distance between portable
and mobile RF communications equipment (transmitters) and the XSlate L10 Rugged Tablet PC as
recommended below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter (W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz outside ISM bands
𝒅 = [𝟑.𝟓
𝑽𝟏]√𝑷
80 MHz to 800 MHz
𝒅 = [𝟑.𝟓
𝑬𝟏]√𝑷
800 MHz to 2.5 GHz
𝒅 = [𝟕
𝑬𝟏]√𝑷
0.01
0.117
0.117
0.233
0.1
0.369
0.369
0.738
1
1.167
1.167
2.333
10
3.689
3.689
7.379
100
11.667
11.667
23.333
Notes:
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
Safety and hazards
Do not operate your EM7565 module:
• In areas where blasting is in progress
• Where explosive atmospheres may be present including refueling points, fuel depots,
and chemical plants
• Near medical equipment, life support equipment, or any equipment which may be
susceptible to any form of radio interference. In such areas, the EM7565 module MUST
BE POWERED OFF. Otherwise, the EM7565 module can transmit signals that could
interfere with this equipment.
In an aircraft, the EM7565 module MUST BE POWERED OFF. Otherwise, the EM7565 module
can transmit signals that could interfere with various onboard systems and may be dangerous to
the operation of the aircraft or disrupt the cellular network. Use of a cellular phone in an aircraft
21
is illegal in some jurisdictions. Failure to observe this instruction may lead to suspension or
denial of cellular telephone services to the offender, or legal action or both.
Some airlines may permit the use of cellular phones while the aircraft is on the ground and the
door is open. The EM7565 module may be used normally at this time.
This device contains FCC ID: Q2GEM7565
Contains transmitter module IC: 4596A-EM7565
This device contains FCC ID: PD98265NG
Contains transmitter module IC: 1000M-8265NGW
Modifications
Any changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment. The FCC requires that you be notified
that any changes or modifications made to this device that are not expressly approved by
Xplore Technologies, Inc. may void your authority to operate the equipment.
Cables
Connections to this Tablet PC must be made only with shielded cables. This reduces possible
interference with radio communications and complies with FCC Rules and Regulations for this
EMC classification.
Airline travel notice
The FAA requires that you suspend wireless operations before boarding an airplane. These
include both internal and external wireless devices.
Disabling internal wireless operations
Important: Use Xplore Dashboard to disable internal Tablet PC wireless operations. (Start >
All Programs > Xplore Technologies > Xplore Dashboard) Tap Wireless, then disable any
wireless adapters such as Wi-Fi (802.11), Bluetooth, and mobile broadband (WWAN).
To disable external wireless devices installed in the Tablet PC ExpressCard slot or attached to
the Tablet PC, eject the card or unplug the external device. To disable external devices through
software, see the instructions that came with the device or contact the device manufacturer.
IC notice (Canada only)
Unintentional Emitter per ICES-003 Class B
Xplore Technologies Tablet PCs are classified by the Industry Canada (IC) Interference-causing
Equipment Standard #3 (ICES-003) Issue 3 as a Class B digital device. This classification is
located on the label on the bottom of your Tablet PC.
The Tablet PC meets the following technical standards:
• IEES-003 Class B
• RSS-210
22
• RSS-102
• RSS-132
• RSS-133
• CSA CAN C22.2 No. 60950-1
Look for a statement on the label similar to the following:
Canada ICES-003, Class/Classe B
This Class B (or Class A, if so indicated on the registration label) digital apparatus meets the
requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l’étiquette
d’enregistration) respecte toutes les exigences du Règlement sur le Matériel Brouilleur du
Canada.
Intentional Emitter per RSS 210
Embedded in your Tablet PC are various Radio Frequency (RF) wireless communication
devices. It may contain one or more radio-type devices that operate in the following bands:
• 525–600 KHz band
• 13.57 MHz (SlateMate RFID)
• 824–960 MHz band
• 1710–2170 MHz band
• 1850–1990 MHz band
• 2400–2496 MHz band
• 5150–5850 MHz band
All radio-type devices embedded in your Tablet PC comply with RSS 210 and RSS-102
standards of Industry Canada. Operation of this wireless communication device is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
The device could automatically discontinue transmission in case of absence of information to
transmit or operational failure. Note that this is not intended to prohibit transmission of control or
signaling information or the use of repetitive codes where required by the technology.
The device for the band 5150–5250 MHz is for indoor-only usage to reduce potential for harmful
interference to co-channel mobile satellite systems; the maximum antenna gain permitted (for
devices in the bands 5250–5350 MHz and 5470–5725 MHz) to comply with the e.i.r.p. limit; and
the maximum antenna gain permitted (for devices in the band 5725–5850 MHz) to comply with
the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as
stated in section A9.2(3).
In addition, High-power radars are allocated as primary users (meaning they have priority) of the
band 5250–5350 MHz and this radar could cause interference and/or damage to LE-LAN
devices.
The Country Code selection feature is disabled for products marketed in the USA and Canada.
23
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas
produire de brouillage et (2) l’utilsateur du dispositif doit éntre prét a accepter tout brouillage
radioélectrique recu, meme si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
The term “IC” before the equipment certification number only signifies that the Industry Canada
technical specifications were met.
This equipment complies with Industry Canada Radio Frequency Electromagnetic Signal (RF)
exposure limits set forth for an uncontrolled environment of portable transmission when tested
with a 0mm separation distance..
Conformité Européne (CE) European Union
Unintentional Emitter
The (Conformité Européne) symbol found on the Tablet PC indicates compliance to the EMC
Directive and the Low Voltage Directive of the European Union. This means that the Tablet PC
meets the following technical standards:
• EN 55032 (CISPR32) – Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment.
• EN 55024 (CISPR24) (IEC 61000 4-2, 4-3, 4-3, 4-5, 4-6, 4-8, 4-11) – Information
Technology Equipment-Immunity Characteristics – Limits and Methods of Measurement.
• EN 61000 3-2 (IEC 61000 3-2) – Electromagnetic compatibility (EMC) – Part 3: Limits –
Section 2: Limitations for harmonic current emissions (Equipment input current up to and
including 16 A per phase).
• EN 61000 3-3 (IEC 61000 3-3) – Electromagnetic compatibility (EMC) – Part 3: Limits –
Section 3: Limitations of voltage fluctuations and flicker in low-voltage supply systems for
equipment with rated current up to and including 16 A.
CE Intentional Emitter
The CE mark shown here is a device ID that means the product complies with the essential
requirements of the RED Directive 2014/53/EU with essential test suites.
Embedded in your Tablet PC are various Radio Frequency (RF) wireless communication
devices. It may contain one or more radio-type devices that operate in the following bands:
• 525–600 KHz band
• 13.57 MHz (SlateMate RFID)
• 832–862 MHz band
• 880–915 MHz band
• 1710–1785 MHz band
• 1920–1980 MHz band
24
• 2500–2570 MHz
• 2400–2496 MHz band
• 5150–5850 MHz band
All radio-type devices embedded in your Tablet PC comply with standards:
• EN60950-1 (IEC 60950-1:2006 +A11:2009) – Safety of Information Technology
Equipment.
• ETSI EN 301 489-1 V2.2.0 ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical requirements; Harmonized Standard
covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the
essential requirements of article 6 of Directive 2014/30/EU
• ETSI EN 62311 – Generic standard to demonstrate the compliance of electronic and
electrical apparatus with the basic restrictions related to human exposure to
electromagnetic fields {0Hz–300 GHz}.
• ETSI EN 62209-2 - HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM
HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES -
HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2:
PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR
WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE
HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
• ETSI EN 301-511 — Harmonized EN for Mobile Stations in the GSM 900 and GSM 1800
Bands Covering Essential Requirements Under Article 3.2 of the R&TTE Directive
(1999/5/EC).
• ETSI EN 301-908-1 — Electromagnetic compatibility and Radio spectrum Matters
(ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-
Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and
common requirements, covering essential requirements of article 3.2 of the R&TTE
Directive.
• ETSI EN 301 489-17 V3.1.1 ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 17: Specific conditions for Broadband Data Transmission
Systems; Harmonized Standard covering the essential requirements of article 3.1(b) of
Directive 2014/53/EU
• ETSI EN 301 489-19 V2.1.0 (2017-03) ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations
(ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers
operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data;
Harmonized Standard covering the essential requirements of article 3.1(b) of Directive
2014/53/EU
• ETSI EN 301 489-52 V1.1.0 (2016-11) Electromagnetic Compatibility (EMC) standard for
radio equipment and services; Part 52: Specific conditions for Cellular Communication
Mobile and portable (UE) radio and ancillary equipment; Harmonized Standard covering
the essential requirements of article 3.1(b) of Directive 2014/53/EU
25
Radio Frequency exposure statement
If your Tablet PC is configured with a 3G/4G mobile broadband (WWAN) module, your Tablet
PC was tested for Specific Absorption Rate (SAR) in a body-worn or portable configuration. All
users of this product will not be exposed to harmful radio frequencies.
Wideband Transmission System radio
Wideband Transmission Systems operating in frequency bands of 5150–5350 MHz in all EU
Member States, including candidate countries, respectively, are restricted to indoor use only.
The Wideband transmission system radio in your Tablet PC contains a custom antenna that
complies with the following directives:
English
Hereby, Xplore Technologies, Incorporated declares that the iX101L1 and iX101L2 is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
German
Hiermit, Xplore Technologies, Incorporated erklärt, dass die iX101L1 and iX101L2 in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
French
Par la présente, Xplore Technologies, Incorporated déclare que la iX101L1 and iX101L2 est en
conformité avec les exigences essentielles et autres dispositions pertinentes de la directive
européenne 1999/5/CE.
Czech
Tímto, Xplore Technologies, Incorporated prohlašuje, _e iX101L1 and iX101L2 je ve shode se
základními po_adavky a dalšími príslušnými ustanoveními smernice 1999/5/ES.
Danish
Hermed, Xplore Technologies, Incorporated erklærer, at iX101L1 and iX101L2 er i
overensstemmelse med de væsentlige krav og øvrige relevante bestemmelser i direktiv
1999/5/EF.
Estonian
Käesolevaga, Xplore Technologies, Incorporated deklareerib, et iX101L1 and iX101L2
vastavust põhinõuetele ja teistele asjakohastele direktiivi 1999/5/EÜ sätteid.
Spanish
Por la presente, Xplore Technologies, Incorporated declara que el iX101L1 and iX101L2 cumple
con los requisitos esenciales y otras disposiciones pertinentes de la Directiva 1999/5/CE.
Greek
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Xplore Technologies Incorporated ΔΗΛΩΝΕΙ ΟΤΙ iX101L1 and iX101L2
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Italian
Con la presente, Xplore Technologies, Incorporated dichiara che il iX101L1 and iX101L2 è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti della direttiva 1999/5/CE. Per
uso riservato, un'autorizzazione generale è richiesta se WAS/RLAN sono usati fuori dei propri
locali. Per uso pubblico, un'autorizzazione generale è richiesta.
26
Latvian
Ar šo, Xplore Technologies, Incorporated pazino, ka iX101L1 and iX101L2 ir saskana ar
pamatprasibam un citiem attiecigiem Direktivas 1999/5/EK.
Lithuanian
Nusprendzia, Xplore Technologies, Incorporated pareiškia, kad iX101L1 and iX101L2 atitinka
esminius reikalavimus ir kitas atitinkamas nuostatas del Direktyvoje 1999/5/EB.
Netherlands
Hierbij Xplore Technologies, Incorporated verklaart dat het iX101L1 and iX101L2 in
overeenstemming is met de essentiële eisen en andere relevante bepalingen van richtlijn
1999/5/EG.
Maltese
Hawnhekk, Xplore Technologies, Incorporated jiddikjara li l-iX101L1 and iX101L2 hija
f'konformità mar-rekwiziti essenzjali u dispozizzjonijiet rilevanti ohra tad-Direttiva 1999/5/KE.
Hungarian
Ezúton, Xplore Technologies, Incorporated kijelenti, hogy a iX101L1 and iX101L2 megfelel az
alapveto követelményeknek és más vonatkozó 1999/5/EK irányelv rendelkezéseit.
Polish
Niniejszym Xplore Technologies, Incorporated oswiadcza, ze iX101L1 and iX101L2 jest zgodny
z zasadniczymi wymaganiami oraz pozostalymi stosownymi postanowieniami Dyrektywy
1999/5/WE.
Portuguese
Nisto, Xplore Technologies, Incorporated declara que o iX101L1 and iX101L2 está em
conformidade com os requisitos essenciais e outras disposições relevantes da Directiva
1999/5/CE.
Slovenian
S tem, Xplore Technologies, Incorporated izjavlja, da iX101L1 and iX101L2 skladen z bistvenimi
zahtevami in ostalimi relevantnimi dolocili direktive 1999/5/ES.
Slovak
Týmto, Xplore Technologies, Incorporated vyhlasuje, ze iX101L1 and iX101L2 je v zhode so
základnými poziadavkami a dalšími príslušnými ustanoveniami smernice 1999/5/ES.
Finnish
Täten, Xplore Technologies, Incorporated vakuuttaa, että iX101L1 and iX101L2 on noudattaa
olennaisten vaatimusten ja muiden direktiivin 1999/5/EY.
Swedish
Härmed Xplore Technologies, Incorporated förklarar att iX101L1 and iX101L2 står i
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser i
direktiv 1999/5/EG.
Icelandic
Hér með, Xplore Technologies, Incorporated segir að iX101L1 and iX101L2 er í samræmi við
nauðsynleg skilyrði og önnur ákvæði tilskipunar 1999/5/EB.
Norwegian
Herved Xplore Technologies, Incorporated erklærer at iX101L1 and iX101L2 er i samsvar med
de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
27
Wireless notices
In some environments, the use of wireless devices (both internal and external) may be
restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in
hazardous locations, etc. If you are uncertain of the policy that applies to the use of this device,
please ask for authorization to use it prior to turning it on. For instructions for disabling internal
wireless devices, see Page16.
Australia/New Zealand (C-Tick) statements
All Xplore Tablet PCs and Xplore Tablet PC systems comply with the Australia/New Zealand
Regulatory Authorities.
Embedded in your Tablet PC may be one or more radio-type devices such as the display
digitizer that operates in the 525–600 KHz band, a Wi-Fi device that operates in the 2.4 or 5.4
GHz Band, a Bluetooth device that operates in the 2.4 GHz band, and an optional mobile
broadband (WWAN) device that operates in the bands of 850 MHz, 1900 MHz, and 2100 MHz.
All radio-type devices embedded in your Tablet PC comply with standards:
• EN60950-1 (IEC60950-1:2006+A11:2009) – Safety of Information Technology
Equipment.
• AS/NZS 2064 Class B (EN55011/CISPR11) – Limits and Methods of Measurement of
Radio Interference characteristics of Industrial Scientific, and Medical (ISM) Radio
Frequency Equipment.
• AS/NZS 3548 Class B (EN55022/CISPR22) – Limits and Methods of Measurement of
Radio Interference. characteristics of Information Technology Equipment
• AS/NZS 4251.2 (EN55024/CISPR24) – Limits and Methods of Measurement of Immunity
characteristics of Information Technology Equipment.
• AS/NZS 4268 (EN300-328-2) – Electromagnetic Compatibility and Radio Spectrum
Matters (ERM).
Internal Bluetooth Module Notice Class B Statement
Class B Equipment: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to the ACMA rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer's instruction manual,
may cause interference with radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference with one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/television technician for help.
28
This device complies with all the essential ACMA rules for Information Technology Equipment.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
Australia/New Zealand (A-Tick) statement
A wireless 3G/4G mobile broadband (WWAN) communication device may be included in your
Tablet PC. The 3G/4G device has been tested and is compliant with the Australian A-Tick
standards. Xplore Technologies’ ACMA Supplier Code is N15820. The device is compliant with
the following standards:
• GSM/EDGE AS/ACIF S042.1 – Requirements for connection to an air interface of a
Telecommunications Network Part 1. General.
• GSM/EDGE AS/ACIF S042.3 – Requirements for connection to an air interface of a
Telecommunications Network Part 3. GSM.
• WCDMA/HSDPA AS/ACIF S042.1 – Requirements for connection to an air interface of a
Telecommunications Network Part 1. General.
• WCDMA/HSDPA AS/ACIF S042.3 – Requirements for connection to an air interface of a
Telecommunications Network Part 3. GSM.
Radio Frequency Wireless Communication Devices
Embedded in the Tablet PC are various Radio Frequency (RF) wireless communication devices.
• The Tablet PC may contain one or more radio-type devices that operate in the following
bands:
• 525–600 KHz band
• 13.57 MHz (SlateMate RFID)
• 832–862 MHz band
• 880–915 MHz band
• 1710–1785 MHz band
• 1920–1980 MHz band
• 2500–2570 MHz
• 2400–2496 MHz band
• 5150–5850 MHz band
• All radio-type devices embedded in the Tablet PC have met all the qualifications for use
under COFETEL regulations and guidelines.
NOM/NYCE statement
All Xplore Tablet PC and Xplore Tablet PC systems meet the safety and technical standards set
by the Normalizacion Y Certificacion Electronica A. C. (NYCE) / Comision Federal de
Telecomunicaciones (COFETEL) regulating bodies and can be safely operated.The Tablet PC
meets the following technical standards:
• NOM-001-SCFI-1993
29
• NOM-019-SCFI-1998
• NOM-EM-151-SCTI
Internal Bluetooth Module Notice Class B Statement
Class B Equipment: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to the NOM/COFETEL rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer's instruction manual,
may cause interference with radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference with one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/television technician for help.
This device complies with all the essential NOM/COFETEL rules for Information Technology
Equipment. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
Radio Frequency Wireless Communication Devices
Embedded in the Tablet PC are various Radio Frequency (RF) wireless communication devices.
• The Tablet PC may contain one or more radio-type devices that operate in the following
bands:
• 525–600 KHz band
• 13.57 MHz (SlateMate RFID)
• 832–862 MHz band
• 880–915 MHz band
• 1710–1785 MHz band
• 1920–1980 MHz band
• 2500–2570 MHz
• 2400–2496 MHz band
• 5150–5850 MHz band
• All radio-type devices embedded in the Tablet PC have met all the qualifications for use
under COFETEL regulations and guidelines.
IRAM statement
All Xplore Tablet PC and Tablet PC systems meet the safety and technical standards set by the
Instituto Argentino de Normalizacion y Certificacion (IRAM) and the Comision Nacional De
30
Comunicaciones (CNC) regulating body and can be safely operated and connected to the
wireless network.
The Tablet PC meets the following technical standards:
• Resolution 92/98
• Resolution 197/2004
• Resolution 799/99
• CNT-Q2-60.11
• CNC-Q260.14 V03
Internal Bluetooth notice
Class B Equipment: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to the IRAM/CNC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer's instruction manual,
may cause interference with radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference with one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/television technician for help.
This device complies with all the essential IRAM / CNC rules for Information Technology
Equipment. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
Radio Frequency Wireless Communication Devices
Embedded in the Tablet PC are various Radio Frequency (RF) wireless communication devices.
• The Tablet PC may contain one or more radio-type devices that operate in the following
bands:
• 525–600 KHz band
• 13.57 MHz (SlateMate RFID)
• 832–862 MHz band
• 880–915 MHz band
• 1710–1785 MHz band
• 1920–1980 MHz band
• 2500–2570 MHz
• 2400–2496 MHz band
• 5150–5850 MHz band
All radio-type devices embedded in the Tablet PC have met all the qualifications for use under
IRAM/CNC regulations and guidelines.
31
ANATEL statement
All Xplore Tablet PC and Tablet PC systems meet the safety and technical standards set by the
Agência Nacional de Telecomunicações (ANATEL) regulating body and can be safely
operated. The Xplore Tablet PC Model iX101L1 and iX101L2 is listed as a Category II product
according to ANATEL standards for Information Technology Equipment.
The Xplore Tablet PC Model iX101L1 and iX101L2 meets the following RF Technical standards:
• Resolution No. 303
• Resolution No. 442
• Resolution No. 454
• Resolution No. 506
• Resolution No. 529
• Resolution No. 533
Internal Bluetooth Class B notice
Class B Equipment: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to the Agência Nacional de Telecomunicações (ANATEL) rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer's instruction manual, may cause interference with radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the
interference with one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/television technician for help.
This device complies with all the essential Agência Nacional de Telecomunicações (ANATEL)
rules for Information Technology Equipment. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
Radio Frequency Wireless Communication Devices
Embedded in the Tablet PC are Radio Frequency (RF) wireless communication devices.
The Xplore Tablet PC Model iX101L1 and iX101L2 operates in one or more radio-type
frequency bands:
• 525–600 KHz band
• 13.57 MHz (SlateMate RFID)
• 832–862 MHz band
• 880–915 MHz band
• 1920–2170 MHz band
• 2500–2690 MHz
32
• 2400–2496 MHz band
• 5150–5850 MHz band
All radio-type devices embedded in the Tablet PC have met all the qualifications for use under
the Agência Nacional de Telecomunicações (ANATEL) regulations and guidelines.
Battery notice
Xplore Technologies sealed lithium ion batteries comply with all applicable shipping regulations
as prescribed by industry and legal standards. This includes compliance with the UN
Recommendations on the Transport of Dangerous Goods; IATA (International Air Transport
Agency) Dangerous Goods Regulations, 44th Edition, 2003, Special Provisions A45, and
applicable U.S. DOT regulations for the safe transport of lithium ion batteries. Each Xplore
Technologies cell or battery has been tested under provisions of the UN Manual of Tests and
Criteria, Part III, Sub-section 38.3. Complies with Battery Directive 2006/66/EC.
Trademarks
Xplore Technologies, Inc. has made every effort to identify trademarked properties and owners
on this page. All brands and product names used in this document are for identification
purposes only and may be trademarks or registered trademarks of their respective companies.
Gobi5000 is a trademark of Qualcomm Incorporated.
Xplore, Xplore Technologies, Speak Anywhere, and View Anywhere are trademarks or
registered trademarks of Xplore Technologies, Inc. in the USA and other countries.
Mayo Clinic and MayoClinic.com are trademarks of Mayo Foundation for Medical Education and
Research.
This product incorporates copy protection technology that is protected by U.S. and foreign
patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property
rights. The use of Macrovision copy protection technology in the product must be authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
The Xplore Technologies products and services may be covered by one or more patent-
protected inventions. Additional patents may also be pending. For more information, see
Patents.
Limited Warranty
This Limited Warranty applies to the Xplore-branded hardware products sold by or leased from
Xplore Technologies, Inc., its worldwide subsidiaries, affiliates, authorized resellers, or country
distributors (collectively referred to in this Limited Warranty as “Xplore”) with this Limited
Warranty (“Xplore Product”).
These terms and conditions constitute the complete and exclusive warranty agreement between
you and Xplore regarding the Xplore Product you have purchased or leased. These terms and
conditions supersede any prior agreements or representations, including representations made
in Xplore sales literature or advice given to you by Xplore or an agent or employee of Xplore
that may have been made in connection with your purchase or lease of the Xplore Product. No
change to the conditions of this Limited Warranty is valid unless it is made in writing and signed
by an authorized representative of Xplore.
33
Warranty disclaimer
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY AND TO THE
GREATEST EXTENT ALLOWED BY LAW, XPLORE MAKES NO OTHER
REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED REPRESENTATIONS, WARRANTIES, OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT,
AND NON-INTERFERENCE. XPLORE DOES NOT WARRANT THAT YOUR USE OF THE
XPLORE PRODUCT WILL BE UNINTERRUPTED OR ERROR-FREE. ANY IMPLIED
WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE
LIMITED WARRANTY PERIOD, TO THE GREATEST EXTENT ALLOWED BY LAW. SOME
STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR
COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY
NOT APPLY TO YOU.
Warranty period
Customer satisfaction is of the utmost importance to Xplore Technologies. Each Xplore Tablet
PC ships with a one-year limited warranty that covers the Tablet PC, hard drive, memory, and
select accessories. Two-year and three-year standard limited warranties are available and cover
only the Tablet PC, hard drive, and memory.
The tablet batteries, located on the back of the tablet, are covered by the same warranty period
as the tablet warranty (one-year limited warranty) and are considered functioning batteries when
the following conditions exist: the battery powers the tablet; the battery is able to charge and
discharge; the battery does not have visible defects.
Defects caused by dropping the tablet or by other impacts, or leaving the product in extreme
environments are not covered by the warranty.
The warranty period for this Xplore Product is one (1) year from the date of product purchase or
longer if you have purchased an extended warranty. The Limited Warranty Period starts on the
date of purchase or lease from Xplore. Your dated sales or delivery receipt, showing the date of
purchase or lease of the product, is your proof of the purchase or lease date. You may be
required to provide proof of purchase or lease as a condition of receiving warranty service.
Warranty coverage
Xplore warrants that the Xplore Product and all the internal components of the product that you
have purchased or leased from Xplore are free from defects in materials or workmanship under
normal use during the Limited Warranty Period. You are entitled to warranty service according
to the terms and conditions of this document if a repair to your Xplore Product is required within
the Limited Warranty Period. This Limited Warranty extends only to the original purchaser or
lessee of this Xplore Product and is not transferable to anyone who obtains ownership or use of
the Xplore Product from the original purchaser or lessee
34
Repair or replacement
Xplore products are manufactured using new materials or new and used materials equivalent to
new in performance and reliability. Spare parts may be new or equivalent to new. Spare parts
are warranted to be free from defects in material or workmanship for thirty (30) days or for the
remainder of the Limited Warranty Period of the Xplore Product in which they are installed,
whichever is longer.
During the Limited Warranty Period, Xplore will repair or replace the defective component parts
or the Xplore Product. All component parts or hardware products removed under this Limited
Warranty become the property of Xplore. The replacement part or product takes on either the
Limited Warranty status of the removed part or product or the thirty (30) day limited warranty of
the spare part. In the unlikely event that your Xplore Product has a recurring failure, Xplore, at
its discretion, may elect to provide you with a replacement unit of Xplore's choosing that is at
least equivalent to your Xplore Product in hardware performance. Xplore reserves the right to
elect, at its sole discretion, to give you a refund of your purchase price or lease payments (less
interest) instead of a replacement. THIS IS YOUR EXCLUSIVE REMEDY FOR DEFECTIVE
PRODUCTS. HOWEVER YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM
STATE TO STATE OR FROM COUNTRY TO COUNTRY.
Software and data
YOU SHOULD MAKE PERIODIC BACKUP COPIES OF THE DATA STORED ON YOUR
HARD DRIVE OR OTHER STORAGE DEVICES AS A PRECAUTION AGAINST POSSIBLE
FAILURES, ALTERATION, OR LOSS OF THE DATA. BEFORE RETURNING ANY UNIT FOR
SERVICE, BE SURE TO BACK UP DATA AND REMOVE ANY CONFIDENTIAL,
PROPRIETARY, OR PERSONAL INFORMATION. XPLORE IS NOT RESPONSIBLE FOR
DAMAGE TO, LOSS OF, OR DISCLOSURE OF ANY PROGRAMS, DATA, OR REMOVABLE
STORAGE MEDIA. XPLORE IS NOT RESPONSIBLE FOR THE RESTORATION OR
REINSTALLATION OF ANY PROGRAMS OR DATA OTHER THAN SOFTWARE INSTALLED
BY XPLORE WHEN THE PRODUCT IS MANUFACTURED.
XPLORE DOES NOT WARRANT SOFTWARE PRODUCTS, INCLUDING ANY SOFTWARE
PRODUCTS OR THE OPERATING SYSTEM PREINSTALLED BY Xplore. Xplore's only
obligations with respect to software distributed by Xplore under the Xplore brand name are set
forth in the applicable end-user license or program license agreement. Non-Xplore hardware
and software products are provided “AS IS.” However, non-Xplore manufacturers, suppliers, or
publishers may provide their own warranties directly to you.
Warranty exclusions
This Limited Warranty does not extend to:
a) Expendable parts;
b) Any product from which the serial number has been removed or altered;
c) Cosmetic damage or ordinary wear and tear;
d) Damage or non-functionality that results from (i) failure to follow the instructions that
came with the product; (ii) accident, misuse, abuse, or other external causes; (iii)
operation outside the usage parameters stated in the then-current user documentation
for the product; or (iv) use of parts not manufactured or sold by Xplore; or
35
e) Damage or non-functionality due to modifications or service by anyone other than (i)
Xplore, (ii) a Xplore authorized service provider, or (iii) your own installation of end-user
replaceable Xplore or Xplore-approved parts.
Limitation of liability
IF YOUR XPLORE PRODUCT FAILS TO WORK AS WARRANTED ABOVE, YOUR SOLE
AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT. XPLORE'S MAXIMUM
LIABILITY UNDER THIS LIMITED WARRANTY OR RELATED IN ANY WAY TO THE XPLORE
PRODUCT IS EXPRESSLY LIMITED TO THE LESSER OF THE PRICE YOU HAVE PAID FOR
THE PRODUCT OR THE COST OF REPAIR OR REPLACEMENT OF ANY HARDWARE
COMPONENTS THAT MALFUNCTION IN CONDITIONS OF NORMAL USE.
XPLORE SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED BY THE PRODUCT OR
THE FAILURE OF THE PRODUCT TO PERFORM, INCLUDING ANY LOST PROFITS OR
SAVINGS OR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. XPLORE SHALL
NOT BE LIABLE FOR ANY CLAIM MADE BY A THIRD PARTY OR MADE BY YOU FOR A
THIRD PARTY.
THIS LIMITATION OF LIABILITY APPLIES WHETHER DAMAGES ARE SOUGHT, OR A
CLAIM MADE, UNDER THIS LIMITED WARRANTY OR AS A TORT CLAIM (INCLUDING
NEGLIGENCE AND STRICT PRODUCT LIABILITY), A CONTRACT CLAIM, OR ANY OTHER
CLAIM. THIS LIMITATION OF LIABILITY CANNOT BE WAIVED OR AMENDED BY ANY
PERSON. THIS LIMITATION OF LIABILITY WILL BE EFFECTIVE EVEN IF XPLORE KNEW
OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF ANY SUCH DAMAGES. THIS
LIMITATION OF LIABILITY, HOWEVER, WILL NOT APPLY TO CLAIMS FOR PERSONAL
INJURY. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY
ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR FROM
COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE OR
COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
Software technical support
Software technical support is defined as assistance with questions and issues about the
software that was either preinstalled by Xplore on the Xplore Product or that was included with
the Xplore branded product at the time of your purchase or lease of the product. Technical
support for software is available for the duration of your warranty period. Your dated sales or
delivery receipt, showing the date of purchase or lease of the product, is your proof of the
purchase or lease date. You may be required to provide proof of purchase or lease as a
condition of receiving software technical support. After the first ninety (90) days, technical
support for software that was either preinstalled by Xplore on the Xplore Product or included
with the Xplore Product at the time of your purchase or lease of the product is available for a
fee.
Warranty transfer to another country
Xplore is not responsible for any handling fees, tariffs, or import duties that may be incurred in
transferring the Products. Products and software may be covered by export controls issued by
the United States or other governments.
36
Australia
The Australian Competition and Consumer Act (2010) (including the “Australian Consumer
Law”) as well as other laws in Australia (“Mandatory Laws”) guarantee certain conditions,
warranties and undertakings, and give you other legal rights, in relation to the quality and fitness
for purpose of Xplore Technologies consumer products sold in Australia.
In Australia, our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure. What constitutes a major failure is set out in the Australian
Consumer Law.
Nothing in this Warranty purports to modify or exclude the conditions, warranties and
undertakings, and other legal rights, under the Australian Consumer Law, and other laws. This
Warranty gives you additional protection for your Xplore consumer product, and identifies a
preferred approach to resolving warranty claims which will be quickest and simplest for all
parties, subject to the exclusions terms and conditions below.
This Limited Warranty applies to the Xplore-branded hardware products sold by or leased from
Xplore Computing, Inc., its worldwide subsidiaries, affiliates, authorized resellers, or country
distributors in Australia with this Limited Warranty (“Xplore Product”). This Limited Warranty is
provided by Xplore Technologies, Inc. (“Xplore”) of 8601 RR 2222, Building 2, Austin, Texas
78728, USA (Phone: 1-866-322-9783 option 9). These terms and conditions constitute the
complete and exclusive Limited Warranty agreement between you and Xplore regarding the
Xplore Product you have purchased or leased. No change to the conditions of this Limited
Warranty is valid unless it is made in writing and signed by an authorized representative of
Xplore.
Warranty period
The period during which this Warranty is in effect will depend upon the Xplore Product to which
it relates. In all cases the commencement date for the period is the actual day of purchase, as
reflected on the authorized reseller’s or distributor’s invoice / receipt provided to you. The period
during which each Xplore Product is the subject of this Warranty is identified in the table below
(‘Limited Warranty Period’).
Xplore CL-Series Tablet PCs
1 year
Other Xplore Tablet PCs (XSLATE L10-Series, F5-Series, and C5-Series)
3 years
Xplore C5/F5-Series and CL-Series Mobile Docks with Key lock and Xplore XSLATE
L10-Series Secure Mobile Dock
3 years
Tilt and Rotate Mount
3 years
Vehicle Mounting Kit (Including Tilt & Rotate Mount and Vehicle Dashboard Bracket)
3 years
Wall Mount Bracket
3 years
37
XSLATE L10-Series Companion Keyboard
1 year
Docking Stations (all other)
1 year
Rugged Digitizer Pen
1 year
Protective Carrying Cases and Portfolios
90 days
Additional Batteries
1 year
Additional Digitizer Pens
90 days
Keyboards (USB and Bluetooth)
90 days
C5/F5-Series EasyConnect Adapter Products
90 days
Auto/Air Adapters
1 year
Single- and Multi-bay Battery Chargers
1 year
AC Power Packs
90 days
Protective Display Film (all products)
30 days
Warranty coverage
Xplore warrants that the Xplore Product and all the internal components of the Xplore Product
are of acceptable quality and free from defects in materials or workmanship under normal use
during the Limited Warranty Period. If you consider that the Xplore Product which you have
purchased is not of acceptable quality, has a defect, or is otherwise not compliant with the
conditions, warranties, undertakings, and legal rights given to you under Australian Law (for
example, it appears faulty, or does not work at all or properly), you can make a claim under this
Warranty. To the extent permitted by the Mandatory Laws, this Limited Warranty extends only to
the original purchaser or lessee of this Xplore Product and is not transferable to anyone who
obtains ownership or use of the Xplore Product from the original purchaser or lessee.
Repair or replacement
If, following receipt of a claim under this Warranty, Xplore or its agent determine that your claim
in respect of a Xplore Product is valid (having regard to the terms of this Warranty), and:
a) if the goods can be repaired and the failure to comply with the warranty is not a major
failure, Xplore or its agent may either repair the Xplore Product, or pay you for the cost
of a repair of the Xplore Product, or replace the Xplore Product with the same or similar
product, or provide you with a refund for the Xplore Product, depending upon what is
reasonable in the circumstances and at no cost to you. Goods presented for repair may
be replaced by refurbished goods of the same type rather than being repaired.
Refurbished parts may be used to repair the goods; or.
b) if the goods cannot be repaired or the failure to comply with the Warranty is a major
failure, (i) you may reject the goods and by so doing elect to receive either a refund for
the Xplore Product or a replacement of the Xplore Product with the same or similar
product or (ii) by action against Xplore, require Xplore to pay you compensation for any
reduction in the value of the goods or lease payments (less interest) below the price paid
or payable by you for the goods
If Xplore provides you with either a replacement or refund or if you reject the goods, you
immediately transfer ownership in the original Xplore Product or part to Xplore. Any such
38
resolution by Xplore of a claim under this Warranty by you does not otherwise detract from any
other statutory rights which you might have in the circumstances, including your right to
monetary compensation for a valid claim. If, following receipt of a claim under this Warranty,
Xplore or its agent determine that your claim in respect of a Xplore Product is invalid, Xplore my
charge you for any labor, parts or transport costs incurred by Xplore or its agent in assessing
your claim.
Software and data
YOU SHOULD MAKE PERIODIC BACKUP COPIES OF THE DATA STORED ON YOUR
HARD DRIVE OR OTHER STORAGE DEVICES AS A PRECAUTION AGAINST POSSIBLE
FAILURES, ALTERATION, OR LOSS OF THE DATA. BEFORE RETURNING ANY UNIT FOR
SERVICE, BE SURE TO BACK UP DATA AND REMOVE ANY CONFIDENTIAL,
PROPRIETARY, OR PERSONAL INFORMATION. THIS LIMITED WARRANTY DOES NOT
EXTEND TO DAMAGE TO, LOSS OF, OR DISCLOSURE OF ANY PROGRAMS, DATA, OR
REMOVABLE STORAGE MEDIA, OR THE RESTORATION OR REINSTALLATION OF ANY
PROGRAMS OR DATA OTHER THAN SOFTWARE INSTALLED BY XPLORE WHEN THE
PRODUCT IS MANUFACTURED.
Warranty exclusions
This section identifies what is excluded under this Warranty.
For the avoidance of any doubt, any and all warranties or conditions which are not guaranteed
under Mandatory Laws and which are not expressly included in this Warranty as additional
warranties or conditions are excluded.
This Warranty does not warrant uninterrupted or error-free operation of the Xplore Product,
which is affected by system configuration, software, applications your data and operator control
of the system, among other factors. Though the Xplore Product is considered to be compatible
with many systems, it is your responsibility to determine compatibility and integration with other
products or systems.
This Warranty does not apply to non-Xplore hardware products or non-Xplore software products
which are not incorporated into Xplore Products or, in the case of software, pre-loaded onto the
Xplore Product at the time of sale, even if packaged or sold with Xplore hardware.
This warranty does not cover:
• any Xplore Product from which the serial number has been removed or altered;
• normal wear and tear, natural performance degradation (e.g. reduced battery life), or
service costs in replacing and maintaining expendable/ consumable parts which have
ceased working through normal wear and tear;
• cosmetic damage such as to the exterior finish;
• minor imperfections within design specification that do not materially alter functionality;
• damage or non-functionality that results from (i) failure to follow the instructions that
came with the product; (ii) accident, misuse, abuse, or other external causes; (iii)
operation outside the usage parameters stated in the then current user documentation
for the product; or (iv) use of parts not manufactured or sold by Xplore
• damage or non-functionality due to modifications or service by anyone other than (i)
Xplore, (ii) a Xplore authorized service provider, or (iii) your own installation of end-user
replaceable Xplore or Xplore-approved parts; or
39
• loss caused by fire, water (liquid spillage or ingression), theft, vermin or insect
infestation.
Limitation of liability
Except as otherwise provided in this Warranty, if Xplore becomes liable to you under this
Warranty or pursuant to any Mandatory Laws, that liability is limited to the maximum extent
permitted by law, including without limitation, s 64A of Schedule 2 of the Australian Consumer
Law. To the extent that Xplore is legally entitled to avail itself of such limitation, Xplore’s liability
is limited to, at the election of Xplore in its absolute discretion, either:
a) in the case of goods:
i) the replacement of the goods;
ii) the payment of the cost of replacing the goods; and
b) in the case of services:
i) the supplying of the services again;
ii) the payment of the cost of having the services supplied again.
Software Technical Support
Software technical support is defined as assistance with questions and issues about the
software that was either preinstalled by Xplore on the Xplore Product or that was included with
the Xplore branded product at the time of your purchase or lease of the product. Technical
support for software is available under this Limited Warranty for the duration of your warranty
period. Your dated sales or delivery receipt, showing the date of purchase or lease of the
product, is your proof of the purchase or lease date. You may be required to provide proof of
purchase or lease as a condition of receiving software technical support. After the first ninety
(90) days, technical support for software that was either preinstalled by Xplore on the Xplore
Product or included with the Xplore Product at the time of your purchase or lease of the product
is available for a fee.
What you need to do to be entitled to claim under this Limited
Warranty:
1. Provide proof or purchase or lease. (Your dated sales or delivery receipt, showing the
date of purchase or lease of the product, is your proof of the purchase or lease date.)
2. Be the original purchaser or lessee of this Xplore Product.
3. Submit your claim to your local distributor or reseller without undue delay after detection
of the defect and in any event within the Limited Warranty Period. Cabling and power
cord precautions.
How to make a claim under this Limited Warranty:
1. Contact your local distributor or reseller and provide your contact information, such as
phone number, email address and other information (such as serial number or fault
description). You may also contact Xplore directly at www.xploretech.com/support.
40
2. If Xplore determines that you have a valid claim under this Limited Warranty, Xplore or
its authorized representatives will repair, replace or refund the Xplore Product at Xplore’s
sole discretion and in accordance with this Limited Warranty.
3. Except as set out in this Warranty, Xplore will bear the expense of a valid claim under
brought under this Warranty. If you wish to claim expenses under this Limited Warranty,
contact your local distributor or reseller.
The information in this publication is subject to change without notice. Xplore Technologies,
INC. SHALL NOT BE HELD LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN NOR FOR ACCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS
MATERIAL.
Model iX101L1 and iX101L2
PN024-02-0xxx-A01
Revision Date: June 2017

Navigation menu