Xtreme DSP Global VTX-RTR-IW Wireless Helmet Communicator User Manual Raptor i 5 viewing

Xtreme DSP Global Pte Ltd Wireless Helmet Communicator Raptor i 5 viewing

Manual

Congratulations for purchasing this ne piece of riding gear to complement the spirit of your ride, regardless of whether you are riding for pleasure or daily commute. It is always exciting to ride and feel the freedom on your coveted machine and with friends!All of us at VERTIXTM thank you (and your friends too!) for choosing this product which we believe delivers the best performance and value to augment your riding pleasure. ENJOY!Raptor-i Wireless Helmet CommunicatorTAME THE NOISE, NOT YOUR SPIRIT!IMPORTANT NOTICEINTRODUCTIONWHAT YOU SHOULD HAVEFUCTIONSINSTALLATION12335OPERATON AND USEMODE PRIORITYUSING MOBILE PHONEUSING INTERCOM691011USING MUSIC PLAYERSPECIFICATIONSTROUBLE-SHOOTING FAQSTERMS AND CONDITIONSOF LIMITED WARRANTY1212CARE FOR YOUR RAPTOR 131313REFUND OPTION 18CONFORMITY NOTICE 18WARRANTY INFORMATION 19TABLES OF CONTENTS19CERTICATE OF OWNERSHIPTHIS PROVES THATNAMEIS THE OWNER OFMODEL NUMBER AND SERIAL NUMBERDATE OF PURCHASE*Please keep your receipt for warranty claimsThis Product was purchased from :Please read IMPORTANT Terms and Conditions of Limited Warranty inside this user manual.To activate your warranty, please log-in and register at : www.vertix.com.sg/warrantywww.vertix.com.sg For more infomation please contact us at support@xtreme-dsp.comWARRANTY INFORMATIONUser ManualRAPTOR-00-02-10 Rev 2.0B12
The VERTIX™ Raptor series is a wireless 2.4GHz system designed for easy retrot on helmets. It allows you to conveniently access audio entertainment, navigation information and communications when wearing your helmet. The Raptor-i works with most mobile phones, GPS navigation devices and music players equipped with Bluetooth® technology.Your Raptor-i is designed with a high quality rubberized double injection molded outer membrane capable of withstanding weather conditions you are accustomed to while riding or may encounter on longer journeys; such as heavy rain, hot and cold temperatures. The Raptor-i is aerodynamically designed and when properly installed will minimize turbulence and drag at high speeds, reducing disturbances and discomfort to the rider.The Raptor-i comes with your choice of a boom or wired microphone headset with specially tuned speakers to deliver high quality audio for your music and communications experience. With the Raptor-i's Cut-the-Noise™ Digital Signal Processing (DSP) and Automatic Gain Control (AGC) technologies, you are assured of communica-tions quality which allows you to be heard clearly by the other party. Your Raptor-i will work through 20dB NRR earplugs to ensure you can hear clearly while protecting your ears against very loud wind-noise levels at high speeds. As the wind-noise level depends on the helmet design, type and brand, the maximum speed which you can comfortably communicate will vary. As there are 4 dierent independent volume settings for the Raptor-i, the volume settings will default to the 50% level everytime you Power ON the unit after a FULL Power OFF.The Raptor-i’s controls are carefully researched, designed and tested for easy feel and operation with riding gloves. To further improve ease of use, a handle mounted, ergonomically-designed remote control unit will soon be available to complement your Remote-Ready Raptor-i.INTRODUCTION12 IMPORTANT NOTICEPlease comply with your local trac laws when using this product and where required, you can detach one speaker. Safety must always be your top priority. You are advised not to use this product under conditions which may put yourself or others at risk of injury. Pull over to the road shoulder or a safe location to communicate when required. Adjust the volume prior to riding for each available mode to your desired level bearing in mind that long exposure to loud sounds can cause hearing impairments. Users are advised to test and acquaint themselves with the Raptor’s Automatic Gain Control feature (only for mobile phone calls) which automatically increases the volume when wind-noise is detected. The use of earplugs is highly recommended for riding speeds in excess of 100kph (62mph) as wind-noise at high speeds is deafening. By opening and using this product, you explicitly accept the terms and conditions for its use and should this product be given or loaned to another user, it is your responsibility to inform the user of the above terms and conditions of use which shall also be applicable to him/her.
FUNCTIONSWHAT YOU SHOULD HAVEMain Unit1) 1 x Raptor-i2) 1 x USB charger3) 1 x USB charging cable4) 1 x Quick user guide5) 1 x User manual1) 1 x 2 Speakers + Boom Mic2) 1 x EZ-Mount™3) 1 x User Guide1) 1 x 2 Speakers + Wired Mic2) 1 x EZ-Mount™3) 1 x User GuideBoom Mic Headset Wired Mic Headset+ orMobile phone functionsVoice dialing (dependent on your mobile phone) Auto call answer (after approx 12s or 3 rings)Call rejectCall redialLast number redialCall Transfer (between your Raptor-i and mobile phone)Independent mobile phone volume control Intercom functionsSupports 3 ridersEasy intercom operationFull duplex conversationsMaximum intercom range up to 500m or 1,640 ft (for Line-of-Sight conditions)Independent intercom volume controlAuto switch to mobile phone for incoming callsFM radio functionsFrequency Range : 76 – 108 MHzIndependent FM Radio volume controlAuto switch to mobile phone for incoming callsGPS Sat-Nav functionsReceive audio information from your Bluetooth® GPS Sat-Nav unitConnects with your mobile phone via your GPS Sat-Nav unit (GPS dependent, please consult your GPS Sat-Nav user manual)Independent GPS Sat-Nav volume control (please consult your GPS Sat-Nav user manual)Auto switch to mobile phone for incoming callsMusic player functionsCompatible with Bluetooth® A2DP music players for High Fidelity Stereo musicCompatible with Bluetooth® AVRCP for music control functions (Next Track, Previous Track, Volume control)Independent Music volume controlAuto switch to phone for incoming callsNOTE : For Next Track, Previous Track and volume control to work, your mobile phone or media player MUST support AVRCP (Audio Video Remote Control Protocol).34
INSTALLATIONThe Raptor-i can be installed on any helmet without aecting structure or nish. The EZ-Mount™ system provides for a simple and secure means of mounting and removing your Raptor-i unit. You can also perform aerodynamic adjustments of the Raptor-i’s attack angle to suit your riding posture on the motorcycle you are riding. ** The Quick Start Guide will help you get started on using your Raptor-i in no time. Do also try to acquaint yourself with this user guide to explore other functions which may be useful. Adjusting Optimum Angle of AttackOPERATION AND USEAlways prioritise your riding or activity above phone calls or entertainment. It is recommended to pull over and stop current activity before answering or having a conversation. Always ride carefully and abide with the laws in your area.56Note : You can adjust the angle of attack for your Raptor-i with no limitation on your desired angle of tilt. What you need is to ensure the EZ-Mount™ contact for your Raptor-i and helmet is maximized. You can do this by aligning the EZ-Mount™ on your helmet with your Raptor-i for maximum contact with each other (75% or more would be good). To check, simply feel the force of trying to snap the Raptor-i o from your helmet and if you cannot push if o easily (like the wind pushing against your Raptor-i from the front edge), you are good. The EZ-Mount™ has been tested to securely hold your Raptor-i for speeds up to 220kph (136mph) when properly mounted.WHEN YOU SEE IT MEANSWhat the Sounds Generally MeanPOSITIVE : Short high pitched tones (single or double “TEE” sounding tones) means connection OK, intercom connected, pairing OK, etcNEGATIVE : Longer low-pitched tones (single or double “TOO” sounding tones)means connection failure, connection terminated, unsuccessful pairing, etc.No lightsRed/Blue lights ashing alternatelyBlue light with short ash every 3 secondsBlue light with longer ash every 3 secondsRed light ashing every 3 secondsSteady Red light (when charger is connected)and when the Red light goes oThe Power is OFFYou are in Pairing modeThe set is in Standby modeThe set is connected with your mobile phone and is ready for useThe Battery is lowYour Raptor-i is being chargedYour Raptor-i is fully charged
Turning OnPress and hold the ON-OFF / INT button. Release the button when you see the BLUE light starting to ash (after approximately 4 seconds). The speaker will sound an audio warning (long high pitch beep followed by one or two short high pitched beeps – 2 short beeps means it is connected to a paired device).Turning OPress and hold the ON-OFF / INT button. Do not release until you hear an audio warning (2 short low pitched beeps followed by 1 long higher pitch beep) and both RED and BLUE lights are turned OFF. BLUETOOTH® PairingThe Raptor-i is compatible with Bluetooth® technology used for pairing mobile phones, music players and between Raptor-i headsets.Pairing ModeMake sure your Raptor-i is OFF.Press and do not release the ON-OFF / INT button until you see both Blue and Red lights ashing alternately. You should hear a long high pitch tone followed by 2 low pitched tones. Your Raptor-i is now in Pairing Mode.Note that the unit will automatically exit the Pairing Mode in about 60 seconds if pairing is not completed or unsuccessful. Repeat again if this happens.Mobile Phone PairingWith the Raptor-i in Pairing Mode, turn ON your mobile phone’s Bluetooth® and search for devices. Please refer to your mobile phone’s user manual if necessary. Your mobile phone should detect “VTX RAPTOR-i". Select this and enter the code 0000 (zero zero zero zero).78Note : To use the Raptor-i with a mobile phone and GPS Sat-Nav device at the same time, you will need to utilize the GPS Sat-Nav unit’s phone function. Please refer to your GPS Sat-Nav user manual for more infomation.Intercom PairingSwitch OFF all Raptors-i near you if possible.Bring the 2 sets you would like to begin pairing close to each other.Put them into Pairing Mode. You will see Red and Blue ashing lights on BOTH sets.Press the ON-OFF / INT button briey on ONE of the Raptor-i to initiate pairing.When both Raptor-i show only a Blue ashing light, the pairing is completed and INTERCOM is established between the 2 sets. Test by talking to conrm.Repeat the process to pair using one of the units you just paired with another Raptor. NOTE: Each Raptor-i unit can only pair with 2 other Raptor-i units. The last 2 sets to pair will have a higher priority and a single INT button press on either of these 2 units will connect them together. The 3rd or last set to pair will require 2 INT presses to communicate with either of the 2 earlier sets. Music Player PairingRefer to Mobile Phone PairingGPS Sat-Nav PairingModels such as the Garmin® Zumo 500 and 600 series supports pairing with your mobile phone and oers an easy and convenient way for you to enjoy both mobile phone and GPS Sat-Nav functions on your Raptor. Please see your GPS Sat-Nav user manual on setting up and if the phone function is supported.For GPS Sat-Nav devices without the integrated mobile phone feature, you will have to decide which one takes higher priority as Raptor-i can only support ONE High Priority device, you may wish to note that most older or entry level GPS Sat-Nav devices does not support phone pairing.
Please note that only ONE (1) function or mode can be used or be ACTIVE at any time. Commands to the Raptor-i to switch modes manually or automatically by incoming mobile or intercom calls will follow the priority set out below:Mobile phone commands Highest Priority and will be switched over regardless of your current mode in use. Intercom commandsMiddle Priority. Will be switched over if you are listening to Music, FM Radio or GPS announcements.GPS Sat-Nav commandsPriority depends on the GPS Sat-Nav device. GPS Sat-Nav models which support mobile phone pairing will be accorded Highest Priority. Please consult your GPS Sat-Nav user manual.Music, FM radioFor Music (MP3) and FM radio, it is best to turn OFF one before activating the other. As example, while in Music (MP3) mode and you want to switch to FM radio, do a quick single press to turn OFF the Music (MP3) rst, then do a quick double press to turn ON the FM radio. You need not do this for incoming mobile or intercom calls as the Music (MP3) or FM radio will be automatically switched out and resume after you end your mobile phone or intercom conversation.MODE PRIORITY (Mobile Phone/Intercom/GPS/MP3 and FM)USING MOBILE PHONEThe mobile phone has the highest priority order amongst all of the available functions. (See “MODE PRIORITY”)Answer Call When a call comes in, the speaker will emit the mobile phone’s ring tone. To answer, simply press and release the call control button. Alternatively, you may leave it to ring and the auto pick up will answer after approximately 12 secs or 3 rings.Reject Call When a call comes in, the speaker will emit the mobile phone’s ring. To reject the call, press and hold the call control button for about 2 secs, release when you hear a low pitched “TOO” sound.End Call To end a call, simply press and release the call control buttonTransfering Call between your Raptor and mobile phoneWhile you are on the call, press and hold the CALL CONTROL button for 2 secs. Your call will be transferred to your mobile phone. To transfer back to your Raptor, simply do the same, ie hold the CALL CONTROL button for 2 secs.Voice CallSome mobile phones have Voice Control functions. To activate the Voice Control, press the “VOL UP“ button twice quickly. Volume AdjustmentTo adjust the volume, press and hold the VOL UP or VOL DOWN buttons until the desired volume is reached.NOTE: When Maximum volume is reached, you will hear 2 low pitched beeps910Clearing All Paired DevicesWith the Raptor turned ON, you can clear all devices paired on your Raptor by pressing the CALL CONTROL and VOL DOWN button together until you see 2 RED ashes.
Any paired Raptor-i unit can activate the Intercom function of the other paired Raptor-i units based on the command given and the current function priority of the other paired Raptor units. The Intercom has “Middle” Priority. (See “MODE PRIORITY”)Enable Intercom (Last communicated or Paired Raptor-i)To enable intercom function with the last communicated or Paired Raptor-i, press and release the POWER / INT button once. To enable intercom function with the 2nd last communicated / Paired Raptor-i, press and release the POWER / INT button twice.If the Raptor-i unit is in range and the connection is successful, the speakers will produce a “TOO” sound followed by a short high pitched beep.If the connection was unsuccessful, the speakers will produce a long low pitched beep. Upon successful connection, you may start speaking to the other Raptor-i in Full-Duplex. NOTE: Any paired Raptor-i unit can activate the Intercom function of the other paired Raptor-i units based on the command given and the current function priority of the other paired Raptor-i units. The Intercom has “Middle” Priority. (See “MODE PRIORITY”)Disable IntercomTo disable intercom function, press and release the POWER / INT button once to disable intercom function. You should hear a long “TOO” sound.Volume AdjustmentTo adjust the volume, press and hold the VOL UP or VOL DOWN buttons until the desired volume is reached.NOTE: When Maximum volume is reached, the speakers will produce 2 low pitched beepsUSING INTERCOM USING MUSIC PLAYERThe Music Player has “Low” priority. (See “MODE PRIORITY”).Bluetooth® compatible : v2.0 Class 1Bluetooth® compatible proles : A2DP / AVRCP / HSP / HFPPairing : can recall up to 8 devicesMultipoint connection : up to four devices (e.g. 1 mobile phone + 2 intercom + 1 stereo (A2DP)Frequency range : 2.4000 ~ 2.4835 GHzIntercom : 3 users, Full-duplex, upto 500m (1,640ft) with Line-of-SightRemote Control ReadyFM Radio : 76-108MHzSPECIFICATIONS11 12Play MusicPress and release the CALL CONTROL button once to start playing Music. (the same applies if the mobile phone or GPS Sat-Nav device has music player function). Please consult the User Manual for your music player device as they may work dierently.Previous TrackPress and release the VOL DOWN button.NOTE : The Raptor-i supports ONE(1) Bluetooth® Stereo (A2DP) player. If your mobile phone is also used as your music player, you CANNOT connect another Stereo music (A2DP) player.Next TrackPress and release the VOL UP button. Volume AdjustmentTo adjust the volume, press and hold the VOL UP or VOL DOWN buttons until the desired volume is reached.NOTE: When Maximum volume is reached, the speakers will produce 2 low pitched beeps.
When you do not use your Raptor-i for an extended period of time, please charge the battery every 3 months to keep the battery in a charged state.Do not use any solvents or de-greasers to clean Raptor-i as it may damage the rubber or plastic body. You can clean it with a warm damp sponge and neutral soap, if required. Remember to cover the USB charging port and headset port before your clean the unit to avoid irreparable water damage to the electronics inside. CARE FOR YOUR RAPTOR-iBelow is a list of commonly encountered issuesBefore you contact us, please review the FAQs below and online for updates to help you quickly resolve the issue and use your Raptor-i. If you are still unable to resolve it, contact your local dealer. If the issue is beyond them, contact us at support@xtreme-dsp.com.1. I cannot Power ON my setThere may not be sucient power. Try charging your battery with the supplied charger and charging cable. The charging indicator should come on and if it does not, leave it for about 30 mins and check again.2. There is no sound from my speakers or only one speaker is workingThe connector may be loose. Ensure the connector is fully plugged in and the volume is set correctly.3. My FM radio is unable to tune in properlyTurn the FM radio OFF and then ON again. The FM radio chip uses the wire of your headset as its antenna and has a lower sensitivity compared to a dedicated FM receiver which you can use indoors. Stretching out the wire to the detachable speaker as much as possible will help as this is the antenna. It should perform well when you are riding provided the radio stations are not too far away or blocked by mountains or tall buildings. TROUBLE-SHOOTING FAQS13 144. I sometimes hear background noise while listening to music from my mobile phone/media playerIf the noise is only heard sometimes, it could be due to static or noise from high voltage overhead cables, TV stations or military radars. If this is not the case, simply turn o your Raptor-i and turn it on again to let it perform a fresh pairing with your mobile phone/media player. In most cases, this should clear up the problem.5. I hear echo and/or high-pitched sounds from my speakersYour microphone may be too close to the speakers. Move it away and check. You may also be too close while testing with your partner. Try moving further away from each other and try again.6. I am having intermittent or poor connection with my mobile phone or other devicesPair with a dierent mobile phone or device rst to conrm if there is a problem with your device. Check if your battery is weak or there are metallic objects or obstructions nearby. If playing music or FM radio is good, try using your mobile phone directly to determine if the connection is intermittent as you may be in a poor signal location. Move closer if the distance between your Raptor-i and the device is too far apart. High voltage power lines and heavy transformers in the vicinity can also cause such problems. Try moving away from these to check if this is the cause. 7. I have diculty pairing with my mobile phonePlease conrm you mobile phone is Bluetooth® enabled and supports standard Bluetooth® HSP, HFP, A2DP and AVRCP proles. Make sure your Raptor-i and your mobile phone are close to each other and enter the PIN code "0000" (zero zero zero zero) correctly if promted. If you are still unable to pair, you may have previous pairing information which were visually deleted but are still residing in your mobile phone's memory. Delete all Raptor-i pairing information from your mobile phone. Consult your mobile phone’s user manual if required. Turn o your mobile phone completely. Remove the battery and replace it after 20 secs. Turn on your mobile phone and attempt pairing again. If you are still unable to pair successfully, delete ALL remaining pairing information and repeat the procedure.
a.b.c.15 168. My Raptor-i does not automatically reconnect with my mobile phone Delete all Bluetooth devices on your mobile phone and turn it o. Remove your mobile phone battery and replace it after 20 secs. Turn on your mobile phone, when ready, turn on Bluetooth and pair your Raptor-i again. When successfully paired, make sure you set the option for your Raptor-i to “Trusted/Automatic/Auto Connect Enable/Always Connect/Discoverable”, consult your mobile phone’s user manual if required. 9. My Raptor-i "freezed" or stopped working unexpectedlyThis may happen due to strong electromagnetic interference from lightning storms or when you ride through areas with high RF energy such as high power TV transmitters, military and commercial radars and jammers. These can overwhelm the electronics and cause your Raptor-i to "freeze". You can "unfreeze" your Raptor-i by simply charging it for a few secs.10. I am unable to charge my My Raptor-iWhen left unused for an extended period, the battery may be in an over-discharged state. The charging light may not show when you try to charge it initially. Leave it to charge for an hour and if the charging indicator lights up, unplug and reconnect the charger. Leave it to charge until the charging indicator turns o. You may have a faulty charging cable or power adapter. Replace and see if the charging is back to normal.When your Raptor-i is already fully charged, the charging indicator lamp may not light up or it may light up only for a while and then go o when you try to charge it again. 11. Can I charge my Raptor-i and use it at the same time?Yes you can. Your Raptor has been designed with this feature in mind. Make sure you rmly seat the charging connector on the Raptor to ensure the eectiveness of its water-resistant design. We recommend you use a good quality portable power pack (Output : USB 5V, 0.5A or higher; Capacity : 1500mAh or higher) to provide an additional 20 hours of use. You must FIRST connect your power pack to your Raptor BEFORE turning ON your Raptor. Connecting the charger to an “already ON” Raptor will shut it down immediately. When this happens, just follow the above procedure.12. Can I use a Motorcycle cigarette charger?Although it is possible, we do not recommend this as you may encounter interference such as noise or high frequency humming sounds on your Raptor’s headset from the motorcycle’s power supply system. Damage arising from the use of such charging means are not covered under our warranty.Your Raptor-i unit comes with a 1-year limited product warranty from the date of original purchase. Please retain the retail sales receipt and your warranty card (registration required) as proof of purchase. This limited warranty by Xtreme DSP Global Pte Ltd (the “Company”) warrants the Raptor-i unit and charger against defects in material and workmanship under normal use for a period of one (1) year from date of purchase. The Company at its sole discretion, will repair, replace or refund the purchase price of the product to the original purchaser during the warranty period provided the product has not been damaged or tampered with and returned in accordance with the terms of this warranty to an authorized VERTIX Service Center or Agent. This warranty excludes specically all shipping costs and taxes. Repair will be at the Company’s option and may include the replacement of parts, boards or batteries with functionally equivalent reconditioned or new parts. This limited warranty is solely for the benet of the original purchaser and is not assignable or transferable to others. This is the complete warranty for your Raptor-i unit and charger. The Company assumes no obligation or liability for additions or modications to this warranty unless made in writing and approved by an authorized ocer of the Company. This warranty is void if:a. The Raptor-i unit has been opened or attempted to be opened by non-authorized parties or personnel.b. The Raptor-i unit is damaged as a result of attachment or attempted attachment with accessories not provided or approved for use with the Raptor-i .This warranty does not cover1. Defects or damage from misuse, accident or neglect.2. Defects caused by improper operation, maintenance, installation, adjustment or modications of any kind.3. Defects or damage due to exposure to excessive temperatures and adverse weather conditions where riding is not possible, external impacts or exposure to corrosive liquids, vapours or substances.4. Cosmetics of the product, accessories and parts which are scratched or damaged after purchase.Warranty ServiceTo receive warranty service, your product MUST BE REGISTERED within 14 days after purchase. You must email the attached Warranty registration card or details to your Distributor or Agent indicated on the card and also to VERTIX Service Support (support@xtreme-dsp.com) who will authorize the repair or replacement . For services, please present the product, together with your Warranty registration card or details and sales receipt at any authorized VERTIX Service Center or at the store from which you have purchased the product. General ProvisionsThis warranty is given in lieu of all other express or implied warranties, including without limitation, implied warranties of merchantability and tness for a particular purpose. The Company’s obligations under this section are limited to the duration of this limited warranty.a. Certain limited-life components that are subject to normal wear and tear, such as decorative nishes, batteries, ttings or other accessories, are exempt from any warranty.b. The Company is not liable for any incidental or consequential damages arising from the use or misuse of any of the Company’s products.c. The user should never attempt to perform service, adjustments or repairs of the Raptor-i unit. Doing so will void all warranties. During the term of the TERMS AND CONDITIONS OF LIMITED WARRANTY
17 18warranty, all products must be returned to the point of purchase or the authorized VERTIX Service Center for all necessary work at the purchaser’s own cost.d. The Company is not responsible for any loss or damage incurred during shipping. All repair work on VERTIX products by parties not explicitly authorized by the Company will void any and all warranties.e. The information in this Manual is furnished strictly for informational purposes and is subject to change without notice. The Company assumes no liability or responsibility for any errors or inaccuracies that may appear in this User Guide. The Company retains the right to amend and change its products, manuals and specications at any time without notice.Waiver and General ReleaseBy using the Raptor-i product you will waive substantial legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept the terms of this agreement, you should immediately return the product for a full refund. By using the Raptor-i product you agree to be bound to this agreement and forfeit the right to sue. Using a communication device while riding a motorcycle, scooter, quad-bike, moped, ATV or any other vehicle, whether on land, water or air (jointly referred to as “Vehicle”) requires your complete und undivided attention. The Company , including its Ocers, Directors, Aliates, Parent Company, Representatives, Agents, Contractors, Sponsors, Employees, Suppliers, Distributors and Resellers (jointly referred to as the “Company”) strongly advises you to take all necessary precautions and remain alert to the trac, weather and road conditions if you chose to use the Raptor-i product, including all derivative products or models irrespective of its commercial name or branding (the “Device”), and stop your Vehicle on the roadside prior to operating the device. Any publications, advertisements, announcements or similar notes that refer to using the Device while riding a Vehicle are solely intended to address its technical capabilities and should not be misconstrued as encouraging users to operate the Device while actively involved in operating the Vehicle in trac, on public or private roads, racing tracks, beaches, mountains, etc. By way of purchasing the Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorneys fees) and holding the Company harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irrespective of jurisdiction. The Company will not be responsible for any physical damages, irrespective of reasons, conditions or circumstances, including malfunction of the Device, and all risks associated with operating it rest solely and entirely with the user of this Device, irrespective of whether the Device is used by the original purchaser or any third party. Xtreme DSP Global Pte Ltd (the “Company”) hereby noties you that using this Device may also be in contravention to local, federal, state or national laws or regulations, and that any use of the Device is entirely at your sole risk and responsibility.1. You, your heirs, legal representatives, successors or assigns, hereby voluntarily and forever release, discharge, indemnify and hold harmless the Company from any and all litigation, claims, debts, demands, actions and liability which may arise, directly or indirectly, from using the Device for any distress, pain, suering, discomfort, loss, injury, death, damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law.2.You fully understand and assume the risks in using the Device, including risk of negligent acts or omissions by others.3.You conrm that you are physically capable to use the Device and that you have no medical conditions or needs that may infringe upon your abilities to do so in a safe manner. You conrm that you are at least eighteen (18) years of age (or of legal age and are legally permitted to ride a motor cycle in your country of residence) and that you have been advised of the risks associated with the use of the Device. You further conrm that you will not consume any alcohol or any mind-altering substances that may aect your alertness, and will not carry, use or consume these before or during the use of the Device.4.You fully acknowledge our warnings and understand that:(a) risks and dangers exist in using the Device while in trac, including but not limited to injury or illness, strains, fractures, partial and/or total paralysis, death or other ailments that could cause serious disability; (b) these risks and dangers may be caused by the negligence of the manufacturers or its agents or any third party involved in designing or manufacturing the Device; (c) these risks and dangers may arise from foreseeable or unforeseeable causes. You hereby assume all risks and dangers and all responsibility for any losses and/or damages, whether caused in whole or in part by the negligence or other conduct of others, including the Company.5.You conrm that you have read this release of liability and fully understand its terms and that you have given up substantial rights by not returning the Device for a full refund (see refund option below).DISCLAIMER OF WARRANTYXTREME DSP GLOBAL PTE LTD DISCLAIMS ALL EXPRESS AND IMPLIED WARRANTIES WITH REGARD TO THE ENCLOSED DEVICE, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. THE DEVICE AND ITS ACCESSORIES ARE PROVIDED "AS IS" AND "AS AVAILABLE" WITHOUT WARRANTY OF ANY KIND BEYOND THOSE ASSUMED IN THE ENCLOSED MANUAL. LIMITATION OF LIABILITYIN NO EVENT SHALL XTREME DSP GLOBAL PTE LTD BE LIABLE FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THE DEVICE, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU ACKNOWLEDGE AND AGREE THAT THE LIMITATIONS SET FORTH ABOVE ARE FUNDAMENTAL ELEMENTS OF THIS AGREEMENT AND THE DEVICE WOULD NOT BE PROVIDED TO YOU ABSENT SUCH LIMITATIONS. SOME STATE STATUTES MIGHT APPLY REGARDING LIMITATION OF LIABILITY. You can seek a full refund for your purchase by visiting our website for instructions and to download a REFUND OPTION form which you must include the mandatory requested information contained therein. Thereafter, you can proceed to your retailer with the Product in its original packaging and completed form for the refund. You must not have any missing items and please note that you must do this within 7 days of your purchase and the product MUST NOT be used.FCC ID : XUR-VTX-RTR-IWThis device has been tested and found to comply with Part 15 of the FCC RulesOperation is subject to the following two conditions:1. This device may not cause harmful interference2. This device must accept any interference received, including interference that may cause undesired operationEUROPEAN CE NOTICEThis device is in conformity with the following directives:EU Low Voltage, Directive 2006/95/ECEU Electromagnetic Compatibility, Directive 2004/108/ECR&TTE, Directive 1999/5/ECThis device is compatible with Bluetooth® enabled products.Interoperability between this device and other Bluetooth® enabled products is not guaranteed.Bluetooth® is a registered trademark of the Bluetooth SIG.REFUND OPTIONCONFORMITY NOTICEFCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to this equip-ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on another circuit. ‐ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Navigation menu