Xuan Yue Digital Technology J29 True wireless earbuds User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4104759
Application ID	JE2UbHHKOqrm0YPeSJFRjw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	106.15kB (1326814 bits)
Date Submitted	2018-12-13 00:00:00
Date Available	2018-12-13 00:00:00
Creation Date	2018-10-27 14:29:59
Producing Software	Corel PDF Engine Version 18.1.0.661
Document Lastmod	2018-12-13 15:55:53
Document Title	Users Manual
Document Creator	CorelDRAW X8
Document Author:	wing

User manual
How to take out
How to wear
Open the charging case's cover to about 90 degrees,
then take out both earbuds vertically.
How to pair
Support V2.1+EDR and above Bluetooth device.
Charging case's
power button
Stereo earbuds use
Charging case's
LED display
Choose suitable earmuffs
Contact charging port
1. Take out both earbuds from charging box.
2. Option 1: charging case with power, take out two and they will
power on automatically, Right one will flash blue and red
alternately then come into pairing mode.
Option 2: charging case without power, take out two and long
press 2S until flash blue, then right one will flash blue and red
alternately and come into paring mode. (Please note: two
earbuds have been TWS paired in factor y setting).
3. Turn on Bluetooth on your phone/media device and scan for "
J29-R" and pair. Enjoy your music freely
Mono earbud use
1.Take out one of them.
2.Long press MFB button for 4S, RED and BLUE light will flash
alternately (means pairing mode).
3.Turn on Bluetooth on your phone/media device and scan for “J29-R”
or “J29-L” and pair.
4.Enjoy your music freely with mono style.
Overview
It can be adjusted to a
comfortable angle
Earbuds pairing solution
Multi-function button( MFB)
LED indicator
FCC ID: 2AKDSJ29
Microphone
Earmuff
Charging case's
charging port
Suppose two units failed for pairing at first time:
•Long press L & R units until RED and BLUE light flash alternately.
•Release button, then you will see L unit flash BLUE, and R unit flash
RED and BLUE alternately. Means two units pair successfully.
•Turn on Bluetooth on your phone/media device and scan for “J29-R”
and pair.
Basic operations
Charging way
Potential problems:
Product parameters
There is a built-in rechargeable battery inside both earbuds and
charging case, which cannot be disassembled.
• Long press MFB button 3S and you will hear “power off”.
• When phone call status, short press MFB button
Fault
to answer, and short press again to hang up; long
press 1S until you hear “du” to reject incoming call.
• When standby status, long press MFB button 1S
until you hear “du” to open SIRI function.
• When playing music, press MFB button to pause/play.
Charging the case
• Plug the USB cable to charging case's charging port, and connect
it to DC5.0V USB port. The LED display will jump flash to show
charging status.
• The LED display will show “100” after full charging, then unplug the
USB cable.
• The LED display will jump flash “05” when low power.
• Next track-- (R unit) quickly
double click MFB button
• Volume up-- (R unit) quickly
triple click MFB button
Reason
Solution
Can not boot
Out of power
Charging
Bluetooth Version:
Earbuds flash red
Battery low
Charging
Bluetooth profile:
No indicator when
charging
Earbuds don't place
correctly
Adjust the position of
the earbuds
Power off aumatically
Battey low
Charging
Too loudly or too noisy
eviroment
High interference or too
far away from cellphone
R & L earbud don't paired
successfully
Changing place or close
to cellphone
Choose low interference
Charging input:
DC5.0V=700mA
Refer to pairing way again
Charging output:
DC 5.0V=500mA
Echo
Unstable signal
Sound only in single
earbud
environment or close to cellphone
Charging the earbuds
• Previous track--(L unit) quickly
double click MFB button
• Volume down-- (L unit) quickly
triple click MFB button
LED light flash BLUE at intervals when listening music/phone call
* Power
one of them, the rest unit will be off also during stereo
* earbudsoffusing.
Accessories:
Working distance:
10M
Charging time:
1hour
Capacity of charging case:
Warnings:
1.Please store this product in a cool, dry place, too cold or too hot will
shorten battery's life.
of charging case, LED light will keep red on both units indicates they
2.Never use this product in heavy rain, Thunderstorms can cause equare charging.(click again the power button of charging case to stop
ipment failures and increase the risk of electric shock.
charging if need)
3.Do not remove or modify the product for any reason, which may cau• A blue light will be on when going to be full charge. ( blue light will
se the product to malfunction or burn down. Please send the product
be off after full charge, also charging case will be off to stop charging to the dealerfor maintenance.
4.Only use the charging cable that has been approved by us. Unapproautomatically)
ved or non-standard USB5V power supply may cause damage to the
• You will hear interval “low power, please charge” when it's not
earbuds.In extreme cases, it may cause explosion, and the product
enough power. Phone call will switch to cellphone when earbuds
warranty is invalid.
low power during phone call.
5.Charging and discharging the earbud repeatedly will lead to battery
performance degradation over time, which is normal for all headset
rechargeable battery additions.
•J29 *1 set
•L & S earmuff *1 pair
6.Keep equipment and accessories out of reach of children and pets to
avoid accidents.
• Place R & L units into charging case. Single click the power button
5.0
A2DP.AVRCP.HFP.HSP
•User guide *1 •Charging cable *1
Capacity of earbud:
Support:
60mAh
stereo mode / mono mode
Battery type:
Functions:
800mAh
polymer li-ion battery
music/voice prompt/phone call
Earbuds dimension:
24.3*21.5*23.8mm
Music time:
about 4H
Talk time:
about 5H
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : wing
Create Date                     : 2018:10:27 14:29:59+08:00
Modify Date                     : 2018:12:13 15:55:53+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : wing
Title                           : J29说明书英文—拿起开机.cdr
Creator Tool                    : CorelDRAW X8
Metadata Date                   : 2018:12:13 15:55:53+08:00
Producer                        : Corel PDF Engine Version 18.1.0.661
Document ID                     : uuid:ab32e06d-020b-41d2-a0f2-21324a730a01
Instance ID                     : uuid:bd4ac548-480a-483d-88d6-cad07fcd9b51
Page Count                      : 2
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools