Y Soft a s 0YX0ML01065 Ultralight P&C; Multireader MF+ User Manual YSQ Terminal Ultralight Users Guide v1 6 EN

Download:
Mirror Download [FCC.gov]
Document ID	3770167
Application ID	8uFvSxUrJ8Dn/0StQLg5Dw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	85.23kB (1065396 bits)
Date Submitted	2018-03-06 00:00:00
Date Available	2018-03-08 00:00:00
Creation Date	2018-01-12 14:44:07
Producing Software	Adobe Acrobat Pro 9.3.2
Document Lastmod	2018-03-06 09:31:55
Document Title	YSQ Terminal Ultralight - Users Guide v1.6 [EN]
Document Creator	Adobe Acrobat Pro 9.3.2
Document Author:	Petr Neugebauer

ML01065
making the MFDs think™
YSoft SafeQ® Terminal UltraLight
User’s Guide
Version 1.6
4.2.2010
© 2009 by YSoft s.r.o.
All rights to this document, domestic and international, are reserved by YSoft s.r.o.. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without prior written permission of YSoft.
Y Soft SafeQ® and its logo are registered trademarks of Y Soft Corporation, a.s.
All other brands and their products are trademarks or registered trademarks of their respective holders, and
should be noted as such.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
2/15
4.2.2010
TABLE OF CONTENTS
Table of Contents .................................................................................................................................................... 3
Introduction ................................................................................................................................................... 4
1.1
Purpose of document ........................................................................................................................... 4
1.2
Goals and Objectives ............................................................................................................................. 4
1.3
Terms and Abbreviations ....................................................................................................................... 4
1.4
Disclaimer .............................................................................................................................................. 4
Terminal UltraLight Overview ........................................................................................................................ 5
2.1
Keyboard usage ..................................................................................................................................... 6
Basic features ................................................................................................................................................. 8
3.1
User Authentication............................................................................................................................... 8
3.2
User Interface ........................................................................................................................................ 9
3.3
Administration ....................................................................................................................................... 9
3.4
Operating Environment ......................................................................................................................... 9
Status of Terminal UltraLight ....................................................................................................................... 10
4.1
Terminal UltraLight flash code sequences ........................................................................................... 10
4.2
Terminal beep code sequences ........................................................................................................... 12
Conclusion .................................................................................................................................................... 13
Relationship with other documents ............................................................................................................. 14
Version history ............................................................................................................................................. 15
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
3/15
4.2.2010
1.1
INTRODUCTION
PURPOSE OF DOCUMENT
This documentation provides essential information on usage of YSoft SafeQ® Terminal UltraLight. It covers
both YSoft SafeQ® Terminal UltraLight Print & Copy and YSoft SafeQ® Terminal UltraLight Print Only versions.
1.2
GOALS AND OBJECTIVES
The YSoft SafeQ® Terminal UltraLight is a low-price version of Terminal Professional. It is realized in form of an
external hardware device. YSoft SafeQ® Terminal UltraLight has no display available; therefore user interaction
is limited to status leds, keyboard and beep sequences.
1.3
TERMS AND ABBREVIATIONS
Terminal UltraLight
YSoft SafeQ® Terminal UltraLight
MFD
Multi-Functional Device
1.4
DISCLAIMER
The user that makes changes or modifications not expressly approved by the party responsible for compliance
(Y Soft s.r.o.) could void the user’s authority to operate the equipment.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
4/15
4.2.2010
TERMINAL ULTRALIGHT OVERVIEW
The purpose of Terminal UltraLight is to provide user interface when interacting with printer and copier. The
key function of the terminal is to handle user authentication and authorization to the device and the user interface for job queue management.
As already mentioned the Terminal UltraLight is produced in two versions:


YSOFT SAFEQ® TERMINAL ULTRALIGHT PRINT & COPY
YSOFT SAFEQ® TERMINAL ULTRALIGHT PRINT ONLY
Picture 1 - YSoft SafeQ Terminal UltraLight Print & Copy
Picture 2 - YSoft SafeQ Terminal UltraLight Print Only
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
5/15
4.2.2010
User authentication is possible with card or pin or any combination.
Only selected card readers are supported by Terminal UltraLight.
The Terminal UltraLight is displayed on the Picture 3. It consist of keyboard, print and copy button and status
leds. For more details on leds refer to chapter 4.
Picture 3 - YSQ Terminal UltraLight
2.1
KEYBOARD USAGE
Capacitive touch keyboard utilized in the Terminal UltraLight is the latest technology providing better reliability
and endurance than standard micro switch or membrane keyboards. Each key press is signalized by a short
beep (if beeps are enabled and use of given key is applicable at the moment).
There are some recommendations for using keyboard:

Use fingerpads instead of fingertips. Fingerpads cover larger area and are much better detected than
fingertips.

Using of force is irrelevant, it is absolutely enough to gently place the finger on the keyboard.

The keyboard will not work when touched by non-conductive materials or materials with very small
capacitance. Such materials include nails, plastic, styluses, pens, screwdrivers etc.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
6/15
4.2.2010

The keyboard will not work when wearing gloves. Some exceptions to this may however apply to latex
gloves used in medicine or food industry.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
7/15
4.2.2010
BASIC FEATURES
This Chapter provides the complete feature set of the Terminal UltraLight in connection with YSoft SafeQ®
PCAS.
3.1
USER AUTHENTICATION

User authentication using PIN

User authentication using card

User authentication using any PIN and card combination
Terminal provides one of the following leds combinations:
- to place card or enter PIN
- to enter PIN when authentication "Card and PIN" used

Card assignment to the user based on the PUK code
1.
Terminal provides following leds combination for requesting to place a card:
2.
When user uses an unknown card (not assigned to any user), the terminal requests for entering a
PUK code:
3.
User is informed about result of card assignment:
a.
User entered valid PUK code and card has been assigned to the user. User is automatically logged in and can print or copy.
or
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
8/15
4.2.2010
b.
3.2
User entered invalid PUK code – leds animation and beep codes during animation
USER INTERFACE

All waiting jobs can be printed immediately just after authorization

Option to print all waiting print jobs
3.3
ADMINISTRATION

3.4
Network auto detection (DHCP)
OPERATING ENVIRONMENT

Support for online accounting

Support for batch accounting

Support for follow-me feature

Support for cluster fail-over
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
9/15
4.2.2010
STATUS OF TERMINAL ULTRALIGHT
As already mentioned the Terminal UltraLight contains status leds that serve for interaction with user. This
chapter provides list of beep and flash code sequences as well as their meanings.
4.1
TERMINAL ULTRALIGHT FLASH CODE SEQUENCES
This section provides flash code sequences used for interaction with a user.
There are following colors used for icons:




Green - Led is green
Red - Led is red
Orange - Led is orange
Grey - Led is off
The position of particular leds illustrates Picture 4.
Picture 4 - Status leds
All leds are switched off.
Terminal power is off.
*animated*
Terminal is processing, please wait.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
10/15
4.2.2010
Place card or enter pin.
Enter pin when authentication "Card and PIN" used.
Enter PUK when PUKs are enabled on server.
Some print jobs available and copying possible. Select (P)rint or
(C)opy.
Valid only for YSoft SafeQ® Terminal UltraLight Print & Copy.
No print jobs available in the queue. Copying is possible (select
(C)opy).
Valid only for YSoft SafeQ® Terminal UltraLight Print & Copy.
*flashing*
Copying in progress. Cancel by pressing (C), (X) or (OK) or by placing a
card.
Valid only for YSoft SafeQ® Terminal UltraLight Print & Copy.
*flashing*
Copying in progress. Server issued a warning, see MFP display for
more details.
Valid only for YSoft SafeQ® Terminal UltraLight Print & Copy.
*flashing*
Printing in progress, please wait until it is finished.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
11/15
4.2.2010
*flashing*
Printing in progress. Server issued a warning, see MFP display for
more details.
*changing*
Animation when user enters a pin on the keyboard.
Table No. 1 - Flash code sequences
For more Terminal UltraLight flash sequences refer to 1.
4.2
TERMINAL BEEP CODE SEQUENCES
.-
Card read error. Please try placing the card again or use the different card.
-..-..----
No print job waiting in queue.
Terminal validation failed. Server reports that the terminal is not registered on SafeQ. Please consult
administrator manual.
User quota has exceeded.
User validation failed. User entered either invalid pin or user card is not registered in the system.
Received error or warning message from server.
Connection to SafeQ server failed.
For more Terminal UltraLight beep sequences refer to 1.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
12/15
4.2.2010
CONCLUSION
In this document you got acquainted with the basic functions of Ysoft SafeQ® Terminal UltraLight. You can find
more information about other processes, configurations and possibilities in the Administrator’s guide which
you can download along with other newest manuals on the Partner’s Portal.
Partner‘s Portal web page: http://partners.ysoft.com/
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
13/15
4.2.2010
RELATIONSHIP WITH OTHER DOCUMENTS
This section describes how this guide is related to other documentation:
Nr.
1.
Document
YSQ Terminal UltraLight – Administrator’s Guide [EN]
Version
Author
1.6
PNE
2.
3.
4.
5.
6.
7.
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
14/15
4.2.2010
VERSION HISTORY
Document author/owner: Petr Neugebauer 
Version
Date
Change
Status
Author
0.1
06/2009
Initial version
Final
PNE
1.0
06/2009
Chapter 2.4 added
Final
PNE
1.1
06/2009
Added icons for flash sequences
Final
PNE
1.2
06/2009
Added keyboard overviews for Print & Copy and Print Only
editions
Final
PNE
1.3
07/2009
Update of Administration issues
Final
PNE
1.4
09/2009
Chapter 1.4 (disclaimer added)
Final
PNE
1.5
11/2009
Chapter 3.1 (details on PUK functionality added)
Final
PNE
1.6
02/2010
Minor changes in flash code sequences
Final
PNE
YSOFT SAFEQ® TERMINAL ULTRALIGHT – USERS GUIDE V1.6 [EN]
15/15
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Petr Neugebauer
Create Date                     : 2018:01:12 14:44:07+08:00
Modify Date                     : 2018:03:06 09:31:55+08:00
Subject                         : SafeQ - Technical Specificatuion
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2018:03:06 09:31:55+08:00
Creator Tool                    : Adobe Acrobat Pro 9.3.2
Format                          : application/pdf
Title                           : YSQ Terminal Ultralight - Users Guide v1.6 [EN]
Description                     : SafeQ - Technical Specificatuion
Creator                         : Petr Neugebauer
Document ID                     : uuid:34cb61b4-640a-4799-b46c-77229d23195e
Instance ID                     : uuid:f7cc753f-4fb3-48dc-aa4c-e02dcade0152
Producer                        : Adobe Acrobat Pro 9.3.2
Page Count                      : 16

EXIF Metadata provided by EXIF.tools