Y Soft a s 0YX0MU03088 USB Reader v3 LF & Legic User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3520998
Application ID	8Cyr7PyHQAq5hKvzPNL9TQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.66kB (545750 bits)
Date Submitted	2017-08-22 00:00:00
Date Available	2017-08-24 00:00:00
Creation Date	2017-07-07 10:45:36
Producing Software	Microsoft® Word 2016
Document Lastmod	2017-08-14 11:39:05
Document Title	User Manual
Document Creator	Microsoft® Word 2016
Document Author:	Pavlačka Roman

USB Card Reader v3 Administrative Guide
Product Sheet
USB Card Reader v3 Administrative Guide
1. Introduction
Purpose of the document
This documentation provides essential information on installation and configuration of YSoft
SafeQ® USB Card Reader verison 3.
Validity of the document
This document applies to YSoft SafeQ® USB Card Reader v3.
Goals and Objectives
The YSoft SafeQ® USB Card Reader v3 that could be simply connected to the multifunctional device and serves for user authentication using card. Card must be assigned to
any user in the YSoft SafeQ system. After the successful authentication the user is able to
manipulate with device and perform his print jobs, copy jobs or scan jobs (depends on the
device).
The YSoft SafeQ® USB Card Reader v3 could be also connected to workstations and can be
used with the credit charger application or with the YSoft SafeQ client for authentication.
Terms and Abbreviations
•
MFD - Multi-Functional Device
•
USB Card Reader v3 - YSoft SafeQ® USB Card Reader version 3
Prerequisite knowledge
The person who installs USB Card Reader v3 must meet the following requirements:
•
knowledge of the YSoft SafeQ system (installation/administration/attendance).
•
knowledge of OS Win 2000, Win 2003 (installation/administration).
Disclaimer
The user that makes changes or modifications not expressly approved by the party
responsible for compliance (Y Soft Corporation a.s.) could void the user’s authority to
operate the equipment.
Hereby, Y Soft Corporation, a.s. declares that the radio equipment type Y Soft USB
Card Reader v3 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.ysoft.com/EU-Declaration-of-Conformity
USB Card Reader v3 Administrative Guide
Product Sheet
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions: (1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
สำ หรับลูกค้ ำที่ซื้อผลิตภัณฑ์นีี ขอบคุณท่ ท่ำนกรุณำเลือกซื้อผลิตภัณฑ์น้ ก่อนกำรใชผ ลิตภัณฑ์ โปรดอ่ำนขอ มู ลและคำ แนะนำ ต่อไปน้
อย่ำงถ่ ถว นเพื่อกำรใชงำนอย่ำงปลอดภัย ข อบังคับ เครื่อง โทรคมนำคมและอุปกรณ์น้ ม ควำมสอดคลอ งตำมขอ กำ หนดของ กทช.
埋込み型心臓ペースメーカーおよび埋込み型除細動器を装着されている場合は、本装
置または本装置のワイ ヤレスカードシステムのリーダライタ部（アンテナ部）から
12cm以上離れて携行および使用してください。 電波により埋込み型心臓ペースメー
カーおよび埋込み型除細動器の動作に影響を与える場合があります。
The product is in conformity with Directive 2002/96/EC of the European Parliament and
of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE) and
Directive 2003/108/EC of the European Parliament and of the Council of 8 December 2003
amending Directive 2002/96/EC on waste electrical and electronic equipment (WEEE).
Only for indoor use
2. Overview
System overview
YSoft SafeQ® USB Card Reader has following characteristics:
•
Connection and power supply of the card reader via the USB host interface.
•
Exchange of card reader possible without MFD turning off (hot-plug).
USB Card Reader v3 Administrative Guide
•
Product Sheet
Compatibility with some MFD additions.
Hardware components
USB card reader specifications
Parameter
Value
Identification
Using a card reader
Voltage
5V DC
Maximum current input
0.5A
Working temperature
+5°C to +35°C
Storage temperature
0°C to +50°C
Working air humidity
20% to 85% without condensation
Storage air humidity
8% to 85% without condensation
Resistance to magnetic field
no added resistance
Transmitting frequency
125 kHz, 13.56 MHz
3. Usage
Please use the card by placing it on the edge of the reader as indicated below.
USB Card Reader v3 Administrative Guide
Product Sheet
4. Mounting instructions
Please mount Card Reader to MFD using mounting kit.
Keep unprotected cords out of the path of foot traffic to prevent tripping. Do not leave cords
dangling anywhere where they can be pulled down and tripped over.
USB Card Reader v3 Administrative Guide
Product Sheet
5. Configuration
For configuration see USB Reader tool for Reader configuration.
Risk
Description
Control
Risk Analysis
Additional Measures
Measures O
Risk (details of all additional controls
(details of
Ratin to be carried out)
all existing
controls)
Falling of
An mounting Small Possibl L
Correct mounting is indicated in the
object/compon kit is
(C4) manual
ent
supplied
with the
device
Tripping on a
cable
The cable is Seriou Possibl M
A recommendation on cable placement is
fitted with a s
(C3) indicated in the manual.
connector at
both ends
that can be
disconnecte
Entry of water The device Small Possibl L
The manual states the user is to prevent
into electronic is damaged
(C4) water from entering the device.
components
Exposure to
non-ionizing
radiation
(radiofrequenc
y)
The device Small Improb L
produces
(D4)
radiofrequen
cy radiation
below limits
indicated by
relevant
norms.
The norms the device meets are listed in
the manual:
EN 55032:15
EN 55024:10
ETSI EN 301489-3 V1.6.1:13
ETSI EN 301489-1 V1.9.2:11
ETSI EN 301489-1 V2.2.0:17
ETSI EN 301489-3 V2.1.1:17
ETSI EN 300330-2 V1.6.1:15
USB Card Reader v3 Administrative Guide
Risk
Description
Product Sheet
Control
Risk Analysis
Additional Measures
Measures O
Risk (details of all additional controls
(details of
Ratin to be carried out)
all existing
controls)
ETSI EN 300330-1 V1.8.1:15
ETSI EN 300330 V2.1.1:17
EN 609501:2006+A11:2009+A1:2010+A12:2011+A
2:2013
EN 62368-1:2014/AC:2015
Y SOFT CORPORATION, A.S. Technology Park, Technická 2948/13 616 00 Brno Czech
Republic P: +420 533 031 500 info@ysoft.com
FCC caution
The device has been evaluated to meet general RF exposure requirement, The
device can be used in portable exposure condition without restriction
Federal Communication Commission (FCC) Radiation Exposure Statement
Power is so low that no RF exposure calculation is needed.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications or changes to this equipment. Such
modifications or changes could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 7
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Microsoft® Word 2016
Format                          : application/pdf
Creator                         : Pavlačka Roman
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2017:07:07 10:45:36+02:00
Modify Date                     : 2017:08:14 11:39:05+08:00
Metadata Date                   : 2017:08:14 11:39:05+08:00
Document ID                     : uuid:594028A6-E8F3-4744-BD94-4799224D0CB6
Instance ID                     : uuid:56faeb67-84e9-47af-913a-a4f87097fcd3
Author                          : Pavlačka Roman

EXIF Metadata provided by EXIF.tools