YEALINK CP960 HD IP Conference Phone User Manual T2C CP960 06 21

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. HD IP Conference Phone T2C CP960 06 21

T2C-CP960_User Manual_06.21

Wi-Fi Channels operating in the 5600-5650 MHz range are disabled by internal SW when this product is deployed in Canada and not configurable by the end user. Caution: (I) Users are also advised that high-power radars are allocated as primary users (for example priority users) of the bands 5600-5650MHz and that these radars can cause interference and/or damage to LE-LAN devices.Avertssement:Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les susmentionnées, notamment:(I) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radar de haute puissance sont désignés utilisateurs principaux (c.-à-d, qu’ils ont la priorité) pour les bandes 5600-5650MHz et que ces radars pourraient causer du brouillage et /ou des dommages aux dispositifs LAN-EL.fréquences 5.15 à 5.25 GHz,Cet appareil est destiné à un usage intérieur uniquement lorsqu'il est utilisé dans la gamme de This device is for indoor use only when using in the 5.15 to 5.25 GHz frequency rangeCE The equipment complies with the European Union Radio Equipment Directive (RED) 2014/53/EU.Compliance with Article 10.2 and 10.10 of European Union Radio EquipmentDirective (RED) 2014/53/EU:Unlicensed Band Products:The 5 GHz WLAN band of this product is restricted from operating within band 5150 to 5350 MHz except when installed indoors.This equipment is restricted by firmware to operate on 2.4GHz and 5GHz in European Union, frequency range and limited e.i.r.p as below:Technology Frequency RangeLimitWi-Fi 2.4000~2.4835GHz 100mw e.i.r.pWi-Fi 5.150~5.250 GHz 200mw e.i.r.pWi-Fi 5.250~5.350 GHz 200mw e.i.r.pWi-Fi 5.470~5.725 GHz 1w e.i.r.pDECT 1897.344 ~ 1881.792 MHz 200mw CondutedBluetooth 2.4000~2.4835GHz 100mw e.i.r.pRED 2014/53/EU requires that for products which could potentially have an issue with a non-harmonized frequency in a specific EU country, the product documentation will list the restrictions, and the packaging will carry a label similar to that below reflecting that country’s code.Note: The ‘red’ color means the product has restrictions in the listed countries. Label example for a product carrying a non-harmonized frequency restrictionFCC Warning:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help.RF exposure warning The Equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.ICThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.NMB-3(B)

Navigation menu