YEALINK T27G IP Phone User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2476404
Application ID	6DtDBnIfRq57DXv9ZGtRoQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.2kB (627449 bits)
Date Submitted	2014-12-17 00:00:00
Date Available	2014-12-17 00:00:00
Creation Date	2014-12-17 18:38:40
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2014-12-17 18:38:40
Document Title	Microsoft Word - 文档 1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	SZ080

Enterprise IP Phone
SIP-T27P
Quick Start Guide (V80.1)
www.yealink.com
Applies to firmware version 45.80.0.1 or later.
Packaging Contents
The following items are included in your package. If you find anything missing, contact your system administrator.
Handset Cord
IP Phone
Handset
Quick Start Guide
Ethernet Cable
Power Adapter
（Optional）
Stand
Wall Mount Bracket
（Optional）
Note: The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above takes
a SIP-T27G IP phone as an example.
Assembling the Phone
1. Attach the stand, as shown below:
Desk Mount Method
Note: You can also mount the phone to a wall. For more information on how to attach the wall mount bracket, refer
to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.
2. Connect the handset and optional headset, as shown below:
Wireless Headset Adapter EHS36
Note: The headset and wireless headset adapter EHS36 should be purchased separately.
The EXT port can also be used to connect the expansion module EXP39. For more information on how to use
the EHS36 and EXP39, refer to Yealink EHS36 User Guide, Yealink EXP39 User Guide.
3. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you on which one
to use.
PC Connection
Power Adapter
(Optional)
(DC 5V)
AC Power Option
PoE ( Power over
Ethernet ) Option
PC Connection
(Optional)
IEEE 802.3af compliant
PoE Hub/Switch
Note: If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is
PoE-compliant.
Startup
After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user
interface or web user interface.
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1. Press the OK key when the phone is idle to obtain the IP address of the phone.
2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10"
or "192.168.0.10") and then press Enter.
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Network Settings: Click on Network->Basic->IPv4 Config
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings,
e.g., IP address, subnet mask, gateway address and DNS address.
Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to configure the IP address,
subnet mask, gateway address, primary DNS address and secondary DNS address for the phone
manually.
PPPoE: If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. Contact the
ITSP for the account and password.
Note: The IP phone also supports IPv6, but IPv6 is disabled by default.
Wrong network settings may result in the inaccessibility of your phone and may have an impact on the
network performance. Contact your system administrator for more information.
Account Settings: Click on Account->Register->Account X (X=1,2,3,4,5,6)
Parameters of the account:
Register Status:
It shows the register status of the current account.
You can select Enabled/Disabled to enable/disable the account.
Line Active:
It is shown on the LCD screen to identify the account.
Label:
It is shown as caller ID when placing a call.
Display Name:
User Name:
It is provided by ITSP for registration (required).
It is an authenticated ID for authentication provided by ITSP (required).
Register Name:
It is provided by ITSP for registration (required).
Password:
It is provided by ITSP for registration (required).
Server Host:
Register status icons on the LCD screen:
Registered
Register Failed
Registering
Note: Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.
Configuring via phone user interface
Network Settings:
Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password: admin)->Network->
WAN Port/VLAN/Webserver Type/802.1x Settings/VPN/LLDP/CDP/NAT to configure the network.
Account Settings:
Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password: admin)->Accounts to
configure the account.
Note: For more information on account parameters, refer to Configuring via web user interface.
Basic Call Features
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press
to activate the headset mode.
2. Enter the number, and then press the Send soft key.
Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requires a connected
headset.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Note: You can reject an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the EndCall soft key.
Using the speakerphone:
Press
or the EndCall soft key.
Using the headset:
Press the EndCall soft key.
Redial
Press
soft key.
to enter the Placed Calls list, press
Press
twice when the phone is idle to dial out the last dialed number.
or
to select the desired entry, and then press
or the Send
Call Mute and Un-mute
Press
to mute the microphone during a call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press
or the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only one call on hold, press
or the Resume soft key.
If there is more than one call on hold, press
Resume soft key.
or
to select the desired call, and then press
or the
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press
or the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press
or the Tran soft key.
Semi-Attended Transfer
1. Press
or the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press
or the Tran soft key when you hear the ring-back tone.
Attended Transfer
1. Press
or the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press
or the Tran soft key when the second party answers.
Call Forward
To enable call forward:
1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
2. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For No Answer Forward, press
to wait before forwarding in the After Ring Time field.
or
to select the desired ring time
4. Press the Save soft key to accept the change.
Call Conference
1. Press
or the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press
or the Conf soft key again when the second party answers. All parties are now joined in the conference.
4. Press the EndCall soft key to disconnect all parties.
Note: You can split the conference call into two individual calls by pressing the Split soft key.
Speed Dial
To configure a speed dial key:
1. Press the Menu soft key when the phone is idle, and then select Features->DSS Keys.
2. Select the desired DSS key, and then press the Enter soft key.
3. Select Speed Dial from the Type field, select the desired line from the Account ID field, enter a label in the Label field
and enter the number in the Value field.
4. Press the Save soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
Voice Message
Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message
center. The power indicator LED slowly flashes red.
To listen to voice messages:
or the Connect soft key.
1. Press
2. Follow the voice prompts to listen to your voice messages.
Customizing Your Phone
Call History
1. Press the History soft key when the phone is idle, press
or
2. Select an entry from the list, you can do the following:
Press the Send soft key to call the entry.
Press the Delete soft key to delete the entry from the list.
to scroll through the list.
If you press the Option soft key, you can also do the following:
Select Detail to view detailed information about the entry.
Select Add to Contacts to add the entry to the local directory.
Select Add to Blacklist to add the entry to the blacklist.
Select Delete All to delete all entries from the list.
Contact Directory
To add a contact:
1. Press the Dir soft key when the phone is idle, and then select the desired group.
2. Press the Add soft key to add a contact.
3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
4. Press the Add soft key to accept the change.
To edit a contact:
1. Press the Dir soft key when the phone is idle, and then select the desired group.
2. Press
or
to select the desired contact, press the Option soft key and then select Detail from the prompt list.
3. Edit the contact information.
4. Press the Save soft key to accept the change.
To delete a contact:
1. Press the Dir soft key when the phone is idle, and then select the desired group.
2. Press
or
to select the desired contact, press the Option soft key and then select Delete from the prompt list.
3. Press the OK soft key when the LCD screen prompts “Delete selected item?”.
Note: You can add contacts from call history easily. For more information, refer to Call History above.
Volume Adjustment
Press
during a call to adjust the receiver volume of the handset/speakerphone/headset.
Press
when the phone is idle to adjust the ringer volume.
Ring Tones
1. Press the Menu soft key when the phone is idle, and then select Settings->Basic Settings->Sound->Ring Tones.
2. Press
or
to select Common or the desired account and then press the Enter soft key.
3. Press
or
to select the desired ring tone.
4. Press the Save soft key to accept the change.
About us
Founded in 2001, Yealink, the global TOP 3 SIP phone provider and a leading provider of VoIP Phone and IP communication
solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more
than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the
value of network communications.
More about Yealink
Since 2001, Yealink has continued to develop state-of-the art, hi-tech VoIP communication terminals that include IP video
phones, IP phones and USB phones. With a worldwide market in more than 140 countries, the company has also established
a first-class international service network.
Our priorities are quality, functionality, ease-of-use, customer support and competitive pricing. To provide new solutions for the
future in this fast-evolving sector, Yealink’s large, talented and highly-experienced VoIP R&D team is totally committed to the
pursuit of excellence.
To date, we have passed more than 80 interoperability tests and meet certification requirements set by leading VoIP system and
platforms. Yealink works in close partnership with T-Mobile, Telefonica, Portugal Telecom and other leading telecommunication
service providers.
YEALINK NETWORK TECHNOLOGY CO., LTD.
Email: sales@yealink.com
Web: www.yealink.com

Anychangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor 
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.   

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo 
conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept
anyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Author                          : SZ080
Create Date                     : 2014:12:17 18:38:40+08:00
Modify Date                     : 2014:12:17 18:38:40+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2014:12:17 18:37:22+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - 文档 1
Creator                         : SZ080
Document ID                     : uuid:f380209e-ea43-47fa-b9e1-e51a22c98cd9
Instance ID                     : uuid:55b9475c-feb2-49bd-8ab6-f4af3c1ae1c0
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 9

EXIF Metadata provided by EXIF.tools