YEALINK T29G IP Phone User Manual 29 8

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. IP Phone 29 8

Contents

Users Manual Part One

Quick Start Guide(V80.1)
Gigabit Color IP Phone
SIP-T29G
www.yealink.com Applies to firmware version 46.80.0.1 or later.
Hereby, Yealink Network Technology CO.,LTD. declares that this phone is in conformity with the
essential requirements and other relevant provisions of the CE, FCC.
This device is marked with the CE mark compliance with EC Directives 2006/95/EC and 2004/108/EC.
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
CE Mark Warning
To avoid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose
of WEEE as unsorted municipal waste and have to collect such WEEE separately.
WEEE Warning
Part 15 FCC Rules
Class B Digital Device or Peripheral
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1. Attach the stand, as shown below:
2. Connect the handset and optional headset, as shown below:
The following items are included in your package. If you find anything missing, contact your system administrator.
（Optional）（Optional）
Stand
Handset Cord
Handset
IP Phone
Ethernet Cable
Desk Mount Method
Wall Mount BracketPower Adapter
Bluetooth USB Dongle BT40
Wireless Headset Adapter EHS36
2
Quick Start Guide
Packaging Contents
Assembling the Phone
Note: The headset, Bluetooth USB dongle BT40 and wireless headset adapter EHS36 should be purchased
separately.The EXT port can also be used to connect the expansion module EXP38 or EXP39. For more
information on how to use the EHS36, EXP38, EXP39 and BT40, refer to Yealink EHS36 User Guide,
Yealink EXP38 and EXP39 User Guide and Yealink Bluetooth USB Dongle BT40 User Guide.
Note: You can also mount the phone to a wall. For more information on how to attach the wall mount bracket, refer
to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.
A
B
3. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you on which one
to use.
After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user
interface or web user interface.
AC Power Option
PoE ( Power over
Ethernet ) Option
PC Connection
(Optional)
Power Adapter
(DC 5V)
PC Connection
(Optional)
IEEE 802.3af compliant
PoE Hub/Switch
3
Note: If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is
PoE-compliant.
Startup
A
B

Navigation menu