YINLAIKE Electronic Technology CL-680 Multifunction Speaker User Manual
Shenzhen YINLAIKE Electronic Technology CO., Ltd Multifunction Speaker
User manual
CL-680
MANUAL
1. Power on/off, Mode switch button.
2. Play/Pause, FM Scan Button
3. Previous Track/Radio Station Button
4. Next Track/Radio Station Button.
5. Volume Increase Button
6. Volume Decrease Button
7. Music Wall Light Control Button
8. LED Light Control Button.
9. Reset Button
10. Aux In
11. 12V DC Input Charge Port
12. 5V USB Output Charge port
13. Radio Antenna
14. Bluetooth Indicate Light
15. Charge Indicate Light
1.Turn ON, Turn OFF.
Press and hold Button 1 for 2 seconds to turn on or turn off
the device.
2.Bluetooth Speaker Mode
1.Turn on Cuboid，the device enter into Bluetooth mode
default or short press button 1 switch it to Bluetooth mode.
There is a tone "Bluetooth” indicate you that the device
entered Bluetooth mode.
2. When your Bluetooth enabled device finds the speaker,
select “CL-680” from the list of found devices.
3. If required, enter the password 0000 (four zeros). Select
OK or YES to pair the two units.
4. A tone will sound in indicating a successful pairing. The BL
indicator will remain solid, indicating that you are connected.
13
14 15
FM
1. Press the “MODE” button on the speaker switch to FM
RADIO mode. There is a tone "FM Radio” indicate you that
the device entered FM Radio mode.
2. Press and Hold button 2 for 2 seconds the device will
automatically search FM radio station. The device will play
the first station it found after finish auto search.
3. Press button 3,4 select station, press 5,6 adjust volume.
Aux wired speaker
1. Turn on the cuboid. In Bluetooth or FM mode, if the auxiliary
cable is inserted into the AUX IN port it will automatically
change to Aux in mode
2. Connect one end of the included 3.5mm auxiliary cable to
the AUX IN port in Cuboid and the other end to an external
device’s.
3. Open a media player on your device and press PLAY to
start playing your music.
4. Use the controls on your connected device to select music
and adjust volume.
Music Wall Light
Press button 7 turn on/off music wall light or change mode of
music all light.
LED Light
Press button 8 turn on/off LED light or adjust brightness of
LED light.
Technical specific
*Driver: 4 ohm
*Speaker Power:12W
*LED Light Power:5W
*Power supply: DC12V, Li-on battery， 8800mah。
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.