YONGNUO PHOTOGRAPHIC EQUIPMENT YN508 Pro LED Video light User Manual 1
SHENZHEN YONGNUO PHOTOGRAPHIC EQUIPMENT CO., LTD Pro LED Video light 1
User Manual
3.Channel Switch Press channel switch button to adjust the LED video light to the channel needed, and the display screen shows CH1 to CH8. Assume that the channel of L is switched to CH2, it means that the channel of R is as well switched to CH2. At this moment, L and R can adjust their brightness mutually. If you have several YN508, you can control the brightness and switch by group, at most 8 groups. YN508 has two YONGNUO 2.4G wireless control system. When organize and use YN508 as a ring light, please adjust them to same channel. Note: This LED video light supports YONGNUO 2.4G wireless control. Accessories do not contain remote controller. Product Structure 1. Soft light panel 2.Stand fix knob 3.mobile phone fix seat 4.U-type stand 5.Assembly part 6.Assembly regulating screw 7.Power switch (The power supply mode can be adjusted, : DC supply mode; : Battery supply mode; : Off.) 8.LED digital display screen 9.Battery container 10.DC power port 11.Battery latch 12.Channel switch button 13.Power Test button 14.5500K +/- button 15.3200K+/- button (Short press color temperature +/- button, the brightness can be accurately controlled by 1%; long press to quickly adjust the brightness.) 永诺专业摄像灯 4.External Power Supply It’s optional to use 2pcs of YONGNUO AC adapter to help this LED video light to acquire long working hours. When using external power, please turn the switch to power supply mode, then the LED video light will cut off the battery supply and stop charging the battery. The power port is “+” inside and “-” outside, the input voltage is 12V and electric current is 2A. Note: When 1pcs of YONGNUO AC adapter is used, just half of the ring light can be lighted up. Therefore, please purchase 2pcs of 12V2A YONGNUO AC adapter to use with this LED video light. Any product malfunction caused by using AC adapter of other brands, YONGNUO is not responsible for warranty repair. 。 10 11 Thank you for using the YN508 LED video light. Please read the manual carefully and keep this user manual properly for reference. 12 Function Introduction 13 1.YN508 is the first two-in-one LED video light designed and made by YONGNUO. It can be used as a ring light by organizing its structure, or, divided it into two independent video light. YN508 meets kinds of photographic demand and supplementary lighting needs. 2.YN508 adopts 480pcs of high-brightness, high CRI (Color Rendering Index) and high TLCI (the Light Consistency Index) LEDs, which helps the video camera to increase its color accuracy and perfectly reproduce the color of the shooting object. 3.YN508 can be remote controlled by mobile phone. Download a mobile APP from the official YONGNUO website, control the LED video light from a mobile phone and read the current brightness, group and channel settings of the LED video light. Switch and brightness of at most 8 groups of LED Lights can be separately controlled. 4.YN508 supports multi-channel wireless control. It means that the switch and brightness of the LED video light can be remote controlled, at the meanwhile, at most 8 groups of LED video lights can be crossover controlled. (Remote controller is optional.) 5.YN508 supports dual power input. It supports NP-F series battery and external DC power supply. It meets kinds of shooting requirements with these two power supply modes. 6.YN508 adopts YONGNUO proprietary LED constant current driving technology which does great help to effectively avoid corrugation and stroboscopic flash. 7.YN508 adopts dual LED digital display screen. The display effect is more stereoscopic and it’s more intuitive when check the power output. 8.YN508 is equipped with a professional U-type stand. It’s more convenient and swift to adjust the supplementary lighting angle. 14 Batt CH Batt CH Batt CH 15 1.Product Installation Batt CH 5.Use on fixed tripod a.Please install this products in the following order. Install the assembly parts and assembly regulated screws Tripod interface Rotate the bracket knob, adjust the fill light angle as needed Tighten up the fix knob Organize the product Install the stand and fix knob b.This video light can be disassembled and used as two independent lights. Method Application 1.Startup &Shutdown and Brightness Adjustment First install the battery or insert DC power, then switch the power switch, the LED video light is lit, press the 5500K brightness adjustment button, adjust the brightness of the video light. 5500K Batt CH 3200K Short press will control the brightness of 1% precision .Long press will rapid Product Specificaion 。 55 480 LED lamp beads 3200K-5500K CH Installation and fixed 1.When using this LED video light, please place it under the ventilated environment. 2.Do not disassemble the product, maintenance or repair of this product should be carried through by technical maintenance personnel of our company or technical maintenance personnel authorized. 3.Do not use this product in flammable and explosive place, or where it can be exposed to moisture. 4.Please keep this product away from the children. Batt Two12V 2A DC power External power source supply 30W(15W and 15W) 3720LM 430*85*320MM Compatible batteries Two NP-F750 series lithium Control distance <15M batteries Contents: Video light(L、R); user manual(1);U-type stand(1); A set of set pieces(1) Note: please contact your dealer if the contents missing. 2.Install Battery When install the lithium battery, please put the battery into battery container in the direction shown by the arrow. When 1pcs of battery installed, 240pcs of LEDs can be lighted up. When 2pcs of batteries installed, 480pcs of LEDs can be lighted up. NOTE: The battery capacity of YONGNUO NP-F750 reaches up to 5200mAh. When YN508 is set to the maximum luminous intensity, it will keep working about 150 minutes. Please take the batteries out when this video light is not used. adjust the brightness. 2.Power Test Press Batt power test button, the digital tube will display the battery capacity reading. As shown in the following picture, the capacity of the left battery is 30%, and the right battery is 90%. Note: The battery remaining capacity tested when the luminous intensity is low will be different from the battery remaining capacity tested when the luminous intensity is high. The battery capacity tested is how long the service time of YN508 will last under the current luminous intensity.When using the external power supply, you press the battery capacity testing button, the screen will shows DC. Batt CH Batt CH Capacity of battery is shown on the Nixie tube Batt CH Batt CH 4.Mobile APP Remote Control The product supports mobile remote control , the APP can be downloaded from the YONGNUO official website or download through scanning the two-dimension code on the gift box, Moible phone APP will be updated continuously. Please pay attention to YONGNUO official website for latest version of APP to get better remote control experience. Failure Analysis and Troubleshooting The functions in this manual are based on the test conditions of our company. Further notice will not be given if the design and specifications change. SHENZHEN YONGNUO PHOTOGRAPHY EQUIPMENT Co.Ltd. Add:Building A, Shenfubao modern optics factory,Kengzi Street, Pingshan District, Shenzhen TEL:0755-8376 2448 Wed:www.hkyongnuo.com Manufacture address:4/F,Building 2, Donglongxing Technology Park,East Huaning Road, Dalang Street,L onghua District,Shenzhen After-sales Service TEL:400-0013-888 FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : yison Title : 未命名 -1 Create Date : 2018:01:05 16:29:57+08:00 Creator Tool : CorelDRAW X8 Modify Date : 2018:01:06 16:28:43+08:00 Metadata Date : 2018:01:06 16:28:43+08:00 Producer : Corel PDF Engine Version 18.0.0.448 Document ID : uuid:a36a70b7-5c57-4386-8a4c-ccb3e4eb2589 Instance ID : uuid:64a50038-651f-44f6-b21d-d4678f946c08 Page Count : 2 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Author : yisonEXIF Metadata provided by EXIF.tools