YONGNUO PHOTOGRAPHIC EQUIPMENT YN968N SPEEDLITE User Manual
SHENZHEN YONGNUO PHOTOGRAPHIC EQUIPMENT CO., LTD SPEEDLITE Users Manual
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3794216 |
| Application ID | 26H7JLU1C/D1XLqeUNZZWg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 207.15kB (2589333 bits) |
| Date Submitted | 2018-03-24 00:00:00 |
| Date Available | 2018-03-24 00:00:00 |
| Creation Date | 2018-01-09 09:07:22 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2018-03-21 10:12:10 |
| Document Title | Users Manual |
| Document Creator | CorelDRAW |
| Document Author: | Administrator |
Manufacture:Shenzhen Yongnuo photographic equipment Co., Ltd Dalang plant Contents Precaution . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . Quick Start . . . . . . . . . . . . . . . . Components Description . . . . . . . . . . LCD Panel . . . . . . . . . . . . . . . . Installation Instruction. . . . . . . . . . . Basic Operations . . . . . . . . . . . . . Wireless Flash Shooting . . . . . . . . . . Advanced Applications . . . . . . . . . . . C.Fn/P.Fn: Setting Custom /Personal Functions Shooting with LED Light . . . . . . . . . . Troubleshooting . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . 5-6 8-10 12-14 15-17 18-19 20 21 22 Precaution To avoid fire or electrical shock , do not expose this product to rain or moisture. To avoid short circuit, please make sure the batteries contacts are securely packed and use the batter y in accordance with the local provisions. Please place the batteries and the parts which can be swallowed mistakenly away from children. If swallowed, please get medical help immediately. To avoid any possible injur y to eyes, do not use the flash in a short distance from the eyes. To avoid any possible safety accident, do not use the flash on the people focusing attention. Please take out the batteries and stop using this product immediately in case of the following situation: This product is dropped or shocked seriously and the inner part of this product is bared. Wear gloves and take the batteries out if the corrosive liquid inside the batteries leaks. This product gives off strange smell, heat or smokes. Do not dissemble or maintain this product because the internal high voltage circuit may cause the electric shock . Please take out all the batteries if this product is not used for a long time. -1- Features Equipped with LED Light Equipped with a high power LED light of high power, brightness can be adjusted, there is a built -in diffuser and a color conversion filter for the LED light. Compatible with YN622N and YN560 Wireless System When YN968N is used as master unit, it can control and fire YN968N/YN622N(II)/YN685N being slave unit. When YN968N is set as YN622 (slave mode), it can received control signal or trigger signal from master unit YN968N/YN622N(II)/YN622N-TX, and achieves slave flash in TTL/M/Multi mode. When YN968N is set as YN560 (slave mode), it can receive control signal or trigger signal from YN560-TX (II)/RF603 (II)/RF605, and achieves flash in M/Multi mode. High Guide Number, Supports High-speed Sync GN60@ISO100,105mm, supports high-speed sync TTL, manual flash, multi flash, Gr grouping flash, the highest synchronous speed can reach 1/8000s. Support Auto/Manual Zooming The YN968N supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~105mm. Supports USB Firmware Upgrade The YN968N equipped with the USB interface, supports firmware upgrade, the users can download the upgrade firmware through the Yongnuo official website to upgrade the flash. Supports Wireless Optical Slave function The YN968N supports receiving YONGNUO, Canon' s and Nikon' s wireless optical master signal, supports S1 and S2 flash mode. Settings Save Automatically, Supports Custom Functions (C . Fn), Personal Functions(P.Fn). Ultra fast Charging Recycle System, Supports External Power Supply Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface -2- Quick Start If you don't have much time to read the whole user manual, we advise you to read this section. 1.Please avoid the excessive use of the output with maximum power. It can effectively extend the ser vice life of this product. (It is recommended that the speedlite should be idle for more than 10 minutes when entering the overheat protection). 2.Press [ ]button to switch trigger methods (on-top , radio wireless master, radio wireless slave and optical slave) sequently. When YN968N is in set-top mode, press [MODE] button to switch flash mode. 3.Function button 1-4 corresponding to different functions according to current state of the flash, operations and details please refer to the following chapters. 4.When YN968N is used as master unit, press [CH] button to enter into channel setting status, press [GR] button to switch groups, operate [ON/OFF] button to set whether the group participating flash, press function button [MODE] to switch flash mode, and rotate [ ]to set flash exposure compensation or flash output. 5.Short press the function button [ ]can enter into the focal length setting state. long press the function button [ ] can enter into the advanced options setting state, then through the ] and [OK] buttons can set the coverage of the focal length and the custom function/personal functions. 6 . Long press the function button 2 and button 3 can set the flash shooting function settings and wireless shooting setting recover to the default set-top TTL flash mode status. 7.Make the flash unit vertical, press the [LED] button， the LED comes on, the LED lighting on the LCD panel, press the LED button again turning off the LED light. 8.When you position the flash head down by 7° , you can shoot subjects at a short distance in a range of approx. 0.5 to 2 m. -3- Components Description Wide refection board Built -in diffuser(for LED light) Wide panel Flash head LED light Optical transmission wireless sensor LED button Color conversion filter (for LED light) AF-assist beam emitter Terminal cover PC port Mini stand USB port hotshoe contact Bounce angle index Radio transmission confirmation lamp (LINK lamp) LCD panel Function button 1/2/3/4 Trigger mode button Flash mode button Batter y compartment cover Charging lamp/ Test flash button Mounting foot lock lever Lock-release button Dust- and waterresistant adapter Power switch Select/Set button Select dial -4- LCD Panel TTL flash Zoom: Focal length :Automatic :Manual ：Beep Batter y level TTL：TTL auto flash :Standard :Bounce ：FP Flash (High-speed sync) :Over heat Apeture ISO Flash exposure level ：FEC FEC amount Manual flash M:Manual flash Zoom 20 mm Manual flash output 0.3 Zm C.Fn Multi(stroboscopic) flash MULTI：Multi flash MULTI M Zoom 20 mm 50 16 H z Flash frequency Manual flash output Number of flashes Zm C.Fn MULTI -5- Hz LCD Panel Press button [ ]can switch the trigger mode: set-top, radio wireless master mode, radio wireless slave mode, optical wireless slave mode(include SC/SN/SC&SN/S1/S2） :Set-top flash TTL ：Radio wireless master mode ：Master ：YN622 MODE TTL TTL TTL TTL ：Radio wireless slave mode ：Slave ：YN622 MODE TTL SLAVE M Zoom 24 mm CH 1 SLAVE ：YN560 MODE Zm C.Fn fEB :Optical wireless slave mode :Slave TTL Zoom MENU1 SLAVE 20 mm Sn CH 1 SLAVE Zm C.Fn Gr -6- MENU1 Outdoors Indoors Installation Instruction 1、Install Batteries Slide the batter y compartment cover in the direction of the arrow as shown. Insert the batteries according to the label inside batter y compartment and make sure the direction of the batter y contact (+/-) is correct. Close the batter y compartment cover in the direction of the arrow as shown. W A R N I N G : L i F e P O 4 a n d / o r L i - i o n t y p e ba t t e r i e s A R E N OT COMPATIBLE, PLEASE USE alkaline or NiMH type batteries! To avoid circuit, please do not use damaged batteries. 2.Attaching to the Camera & Detaching from the Camera Slip the speedlite's mounting foot all the way into the camera's hot shoe. Slide the mounting foot lock lever to the right side as the arrow shown, until heard the “clicks”sound. To detach the speedlite, press the [lock-release button] and slide the [Mounting foot lock lever] to the left side, then detach the speedlite. 3.Power-on and Power-off Set the power switch to [ON] position, the speedlite will turn on and start charging. After turned on, the [Charging lamp] will bright with red light which indicates it can flash. After use, set the switch to [OFF] position to turn off the power source. Please take out the batteries after turning off the power of the speedlite. 4.Test Flash When the charging lamp turns red, you can test the flash is normal or through the [TEST] button. -7- Basic Operations 1.Button Operation [ON/OFF]switch Set the switch to the ON/OFF can turn on/off the power source [MODE]button Through the button can switch between TTL/M/ MULTI ] Trigger mode button Short press the button can switch the trigger mode: set-top, radio wireless master , radio wireless slave, optical wireless slave(SC/SN/SC&SN/S1/S2) ]Select dial Through the dial can adjust the selected parameters which need adjusted, related operations and details please refer to the subsequent chapters ]Select/OK button Confirm and save the parameter settings According to the current state of the flash, the [ Function button 1/2/ corresponding four function buttons are in different roles, related operations and details 3/4] please refer to the subsequent chapters [TEST] button Test flash 2.Statues of [Charging Indicator] Statues Meaning Method Red light The speedlite is fully charged and can be used. Normal Green light Quick flash* ready The speedlite can be used with“quick flash” Goes off The speedlite has not been fully charged. Waiting for completion of fully charged *About Quick Flash The Quick Flash function enables flash shooting while the charging lamp is green (before the flash is fully charged).The guide number is 1/2 to 1/6 of the full output, but it is useful for shooting with a faster recycling time at a short shooting distance. 3.Meaning of [Link lamp] [LINK] lamp statues Meaning Method Green light Radio transmissing Normal Red light Flash Trigging Normal -8- Basic Operations 4.The meaning of [Sound Prompt] The Sound Meaning Form Method Tick---a long sound The speedlite is fully charged, and can be used Normal Three tick , two times The exposure maybe excessive Adjust exposure compensation or change shooting condition Tick tick tick The exposure may be insufficient Adjust exposure compensation or change shooting condition Tick-tick tick tick tick Overheat protection prompt Idle 10 minutes for overheat released. Tick-tick-tick Low batter y and the speedlite is about to shut down Replace the batteries 5.TTL Mode In TTL mode, the metering system of this camera will detect flash illumination reflected back from the object so as to automatically adjust the exposure compensation. In TTL mode, the light intensity can be adjusted by setting FEB, FEC and flash exposure lock(FVL). 6.M Mode In M mode, you can set flash output as your requirement by short press the function button ], you can adjust the flash output through ].Adjustment range of flash output is 1/1281/1, and the output can be divided into 8 grades, each has maximum 3 grades for fine adjustment, with grade 0.3EV, 0.7EV as adjustment increment, totally 29 grade fine adjustment. 7.Multi (stroboscopic) Mode Multi mode, the speedlite will flash according to the flash output, flash frequency and number of flashes you set. Select the number of flashes through the function button [ ], select the frequency through the function button [ ]. Then adjust the numbers of flashes and flash frequency through the [ ]. The adjustment method of the flash output are same as the M mode.The number of flashes range is 1-100, and the range of flash frequency is 1-199. -9- Basic Operations 8.Auto zoom： Short press the function button [ Zm C.Fn ] until the local length value displays on LCD panel, then adjust the coverage through [ ]. When it displays[ ],attach the speedlite to the camera, the flash coverage will change as the lens focal length and move back and forth to commodate different flash coverage . 9.Manually set the zooming position: Press the function button [ Zm C.Fn ]until the local length value displays on LCD panel, then adjust the coverage through[ ]. lf[ ]is displayed, you can adjust the flash coverage (20,24,28,35,50,70,80,105mm) manually. 10.AF Assist Beam Emitter(C.Fn04) When using AF under low-light, the built-in AF-assist beam emitter of the speedlite will be emitted automatically to make it easier to autofocus. Please refer to the C.Fn chapters. 11.Automatic Setting Saving The speedlite will automatically save the current settings which will convenient to your next use. 12. Power Saving Mode(C.Fn01) The power saving mode can be achieved by through custom functions settings, please refer to the C.Fn chapters. 13.Overheat protection When continuous flash, the temperature of the flash head may increase, a warning icon[ ] icon will be displayed on LCD panel, and the recycling time will be longer. When repeated firings of the flash, the overheat protection function will be triggered, the LCD is lighting in red, the speedlite will be locked ,in such case, please wait for about 10 minutes before continuing use. When the speedlite warns overtieating, please reduce the use intensity. Please mind the hot batteries when you take them out after the continuous shooting. 14.About Batter y Capacity When the batter y capacity is insufficient, the screen is as shown in figure, and please change the batteries. -10- Wireless Flash Shooting: Radio Transmission YN968N speedlite supports YN622 mode and YN560 mode radio wireless transmission. Using YONGNUO transmitter or speedlite which supports wireless transmitting can be easily achieved according to the same method of flash photography. When YN968N is used as master unit, it can control slave units as below:YN968N,YN622N,YN622N II,YN685N When YN968N is used as slave unit, it can receive signal from master units as below: YN968N,YN622N-TX,YN622N,YN622N II(using YN622 mode) YN560-TX,RF605,RF-603 series products (using YN560 mode) System design: The settings of the speedlite (mater unit) on the top of the camera automatically reflects in the speedlite (slave unit) being wirelessly controlled. Therefore, there is no need to use a slave unit in shooting. The basic relative position and operating specification show as below. Positioning and Operation Range (Example of wireless flash shooting) Position the slave unit using the supplied mini stand. Slave SLAVE Before shooting, perform a test Master MASTER flash and test shooting. The transmission distance may b e s h o r t e r d e p e n d i n g o n t h e Slave SLAVE conditions such as the positioning Transmission of slave units, the surrounding envi distanceApprox. 100 m ronment and weather conditions. Slave SLAVE 1.Wireless Master Unit Settings* Attach the flash on the camera and set it as the master unit. Press [ ]button until[ ]and [ display. Radio channel setting Press the function button 4 until [ CH ] is displayed, press the function button [ CH ] to choose the current channel, and adjust the channel through [ ], there are 1-7 channel for option. *Wireless master unit only supports YN622 mode. -11- M TTL A TTL TTL TTL TTL Wireless Flash Shooting: Radio Transmission 2.Wireless Slave Unit Setting -YN622 Mode Set the other YN968N as slave unit . Press [ ]button until [ ]and [ ]icons display, and then set the channel (The setting method is same as master unit. Set the channel of slave unit consistent with as master unit). Press function button 3 [ ] to set the groups of slave unit. There are A/B/C groups optional. When slave flash is ready, the AF assist beam blinks at one second inter vals (It can be disabled through custom function C.Fn04). 3.Set Flash Mode and Group from Master Unit Press function button [ Gr ]to enter into group setting status. “M” is short for master unit. A/B/C respectively represents slave unit of A/B/C group. Press function button [ ON OFF ] to set whether the flash group participating flash. Press function button[ A MODE ]to set the flash mode of current group. TTL mode and M mode are supported. Press function button[ Gr ]to switch groups, rotate [ ]to set flash exposure compensation and flash output of current group. TTL M Zoom 24 mm YN622 CH 1 SLAVE Gr Zm C.Fn ON MENU1 OFF TTL TTL 1 32 OFF A MODE Gr 4.Group Focal Length Settings(ZOOM) Short press function button [ ]to enter into group focal length setting interface. Press function button [ Gr ]to switch groups, press function button [ ] and [ ] or rotate ]to set focal length, and press[ ]to return. 5.Test flash When half press camera shutter button, the LINK light of master unit and slave unit lighting green. This means the communication is normal. Press [TESE] button on master flash, the slave flash fires. When you need bigger flash output, you can increase the slave unit. -12- Wireless Flash Shooting: Radio Transmission 6.Wireless Slave Unit Setting -YN560 Mode YONGNUO wireless flash trigger compatible with YN968N can be used as transmitter to fire YN968N. In radio wireless slave mode, YN968N can be switched between YN622 mode and YN560 mode. For the master unit setting, please refer to the master unit’s usermanual. Under MENU2 inter face, press function button [ YN560 ] to switch it to YN560 slave mode. Press function button [ CH ] to set channel of slave unit consistent with master unit. There are 1-16 channel for option. Press function button 3 [ ] to set groups of slave unit. There are A/B/C/D/E/F groups optional. In YN560 mode, press [MODE] button to set flash mode. Supports M mode and Multi mode. Press function button [ ]and rotate[ ]to set the flash output . Wireless Trigger Compatible List Supported by YN622 Mode Transmitter (Speedlite) YN968N Slave YN968N YN622N-TX YN622 Mode YN622N(II) Channel Group Function CH1CH7 Support A/B/C CH1CH7 Support A/B/C CH1CH7 Support A/B/C TTL Flash Manual Flash Zoom Setting Support (Flash outSupport put can be adjusted Support from speedlite) Support (Flash outSupport put can be adjusted Support from transmitter) Support (Flash outDo not Support put can be adjusted support from transmitter) Wireless Trigger Compatible List Supported by YN560 Mode Transmitter YN968N Channel Slave YN560-TX(II) Series RF605 Series RF603(II) Series YN560 MODE Group Function TTL Flash Manual Flash Zoom Setting CH1CH16 Do not Support A/B/C/D/E/F support Support (Flash output can be adjusted from YN560-TX) CH1CH16 Do not Support A/B/C/D/E/F support Support (need to set Do not the flash out on the support speedlite) CH1CH16 Do not Support Do not (All groups support can fire) Support (need to set Do not the flash out on the support speedlite) -13- Support Wireless Flash Shooting: Optical slave mode Set the YN968N as optical slave unit. ] until displays the Press the button [ ]and [ ]. TTL 20 mm Zoom Sn CH 1 SLAVE Gr Zm C.Fn Select a trigger mode when press the function b u t to n 4 [ M E N U ] d i s p l a y s t h e SC/SN/SC&SN/S1/S2 trigger modes*. Zoom MENU1 20 mm SLAVE Please allow the wireless trigger sensor face to the master flash by rotating the flash head. Before shooting, the slave unit and master unit should be set on the same channel. SC S2 MENU2 SC/SN mode can respectively receive the built-in flash of the YN568EX II/580EXII/7D/60D/600D,SB-910/900/800/700, commander mode of Nikon camera, supports 4 channels, realizing TTL and manual flash. Before shooting, the slave unit and master unit should be set on the same channel. S1 and S2 mode are suitable for MANUAL flash environment and TTL flash environment respectively. Under these two modes, the way to adjust the output is like that in M mode only by the function button [ ]and rotate the [ ]. SC: Indicating that it can only receive wireless signal from Canon system, avoiding Nikon system. SN: Indicating that it can only receive wireless signal from Nikon system, avoiding Canon system. SC&SN：Both support Canon & Nikon system. S1 mode: In this mode it will work with the first flash synchronously of the master flash, with the result consistent with the use of radio slave. To use this mode properly, the master flash should be set at manual flash and the TTL flash system with preflight function and the red-reduction function with multiple flashes should not be used. S2 mode: It is also called "pre-flash cancel mode". This mode is similar with S1 mode, but it can neglect the pre-flash given by TTL flash. Therefore, it can support the master flash working in TTL mode. In particular, if S1 mode cannot flash properly and synchronically with your internal flash, you can tr y to use S2 mode. *Commonly used trigger mode can be set by C.Fn-10 . -14- Advanced Applications 1.Flash Exposure Compensation(FEC) In order to make the shooting effect more suitable to your needs, you can set the flash exposure compensation through the camera or on the flash. The exposure compensation value is within the range of -3EV~+3EV. lt can be set through pressing the function button [ ]and rotating the [ ]. NOTE: When the speedlite, camera and trigger have set the exposure compensation at the same time, which will overlap the exposure compensation. 2.Flash Exposure Bracketing (FEB) The FEB function can be set through the camera. After the exposure bracketing being set, after ever y 3 photos being taken, exposure compensation will be made automatically, for exsample, exposure in the sequence of normal->under>over. This function helps you improve the success rate of shooting. The function need to operate on the camera, for the detailed operation method please refer to your camera manual. NOTE: When using the exposure bracketing, we suggest you set the driving mode of the camera as “single shot”,and check if the flash back to full charger before shooting. 3.FV Lock To use this function should be first set the [AE/AF-L] function button to “FV Lock”on the camera. At the moment please focus on the subject through the view window, and then press the [AE/AF-L] button. The speedlite will fire preflish to obtain the flash exposure degree of the subject. Then press the camra shutter when you confirm the shooting scene framework .(The function can only be used when it is supported by your camera. For the setting method please refer to your camera manual.) 4.High-speed Sync Flash With high-speed sync (FP flash), the flash can be synchronized with all shutter speeds, the maximum shutter sync is up to 1/8000s. High-speed synchronization is particularly convenient to use aperture priority to fill flash for the portraits. Through the camera menu, set the flash sync speed to Auto FP, the speedlite will enable the high-speed sync function automatically. 5.Second-curtain Sync Flash After the second-curtain sync enabled, the speedlite will flash at the moment when the shutter is going to be shut. Use the slow-speed shutter and secondcurtain sync can make image tail for the shooting subject. The High-speed sync/second curtain sync flash function can only be used when it is supported by your camera. For the setting method please refer to your camera manual. -15- Advanced Applications 6.Use Wide Panel Pull out the Wide panel, push back the Reflection board and arrange them as per the figure; in such case, the flash scopes will extent to 14 mm ,the flash range will be enlarged and the effect will be softer and more natural. 7.Reflection Flash Bounce flash means to take photos by making flash light head aimed at wall or ceiling and using the light reflected back from the ceiling or wall to light the desired object, so that the shade behind the object can be decreased to get more natural shooting effect. If the wall or ceiling is too far, the bounce flash may be too weak to get enough exposure. The wall or ceiling should be even and white in order to get efficient reflection, if the reflection surface is not white, color cast may appear in photo. 8.Use Reflection Board For shooting with the reflection board in flash, pull out the reflection board and the wide panel out from the light head at the same time and then push the wide panel back . In such case, if this product is being used to take photos, it will produce a highlighted point on the eyes of the subject and thus make the eyes charming (catching light). This function can reach optimal effect when the flash head is up 90°. 9.Using the diffuser(Options) Fitting the diffuser lets you diffuse the light from the flash over a wide range, producing a softer light and reducing shadows. When fitting the diffuser, the zoom position is locked, you can change the setting by P.Fn05. -16- Advanced Applications 10.Short Distance Flash Shooting When you position the flash head down by 7° , you can shoot subjects at a short distance in a range of approx. 0.5 to 2 m. 11.PC Sync port (input) Through connecting to the PC sync por t, you can make the flash synchronously. 12.Use the External Batter y Pack You can purchase the external batter y pack SF-18C or SF-17C,connect it to the external power socket of the speedlite, even when using external power, insert batteries into the speedlite. After flash the batter y pack will charge for the speedlite. 13.High-speed Continuous Shooting The flash can support the high-speed continuous shooting function. Please set the camera in the continuous shooting form and then shoot. 14.Factor y reset Long press the function button 2 and button 3 can set the flash shooting function settings and wireless shooting setting recover to the default set-top TTL flash mode status. Clean the custom function settings(C.Fn) and personal function settings(P.Fn) please read the related chapter. 15.Firmware Upgrade 1).Log in the YONGNUO official website ( w w w. h k y o n g n u o . c o m ) t o d o w n l o a d t h e upgrade software and the latest firmware. 2).Power off, use USB-Micro USB cable connect to PC. (Do not include cable) 3).Press the [MODE] button and set the power switch to [ON], the LCD will display firmware upgrade interface. 4).Complete the firmware upgrade operation according to the prompt of software. -17- C.Fn/P.Fn: Setting Custom /Personal Functions Long press the function button [ ] to enter into the custom function, rotating the [ ] to choose the items which need adjusted. Then press the [OK] button to enter into the program setting mode, rotating the [ ]to select the option and press [OK] button. After finishing the custom settings, press the function button [ ] return to the ready shooting state. press the function button[P.FN]enter into the personal function，press the function button[Clear]to clear the C.FN or P.FN settings. C.Fn: Custom Functions C.Fn-00: Firmware Version Display the information of current version for the speedlite. C.Fn-01: (Auto power off ) When the speedlite is not operated for 5 min., the power turns off automatically to save energy. You can disable this function. 0: ON (Enabled), 1: OFF (Disabled) C.Fn-02: 0: 1: (Modeling flash) -Enabled Depth-of-field preview button / - Enabled with both buttons C.Fn-03: (Test firing with autoflash) 0: 1/32 (1/32), 1: 1/1 (Full output) C.Fn-04: （AF-assist beam firing) 0:ON (Enabled),1:OFF(Disabled) C.Fn-05: (Auto zoom for sensor size) 0:FX(FX format),1:DX(DX format) C.Fn-06: (Slave auto power off timer) 0:60min(60 minutes）,1:10min(10 minutes) C.Fn-07: 0: (Flash exposure metering setting) (Speedlite button and dial)，1: C.Fn-08: (Beep) 0：OFF （Off），1：ON （On） -18- (Speedlite dial only) C.Fn/P.Fn: Setting Custom /Personal Functions C.Fn-09: (LCD panel illumination) When a button or dial is operated, the LCD panel illuminates. You can change this illumination setting. 0: 12sec (On for 12 sec.) 1: OFF (Disable panel illumination) 2: ON (Illumination always on) C.Fn-10: Through the function button [MENU] can witch to the wireless optical slave mode. 0: SN (Only SN) 1: SC/SN (lncluding:SC/SN) 2: SN/S1/S2 (lncluding:SN/S1/S2) 3: SC/SNS1/S2 (lncluding:SC/SN/S1/S2) C.Fn-11: SL IND（ Slave unit indicator ） 0:ON( Enabled ) 1:OFF(Disabled) P.FN: Setting Personal Function P.Fn-01: （ LCD panel display contrast ） You can adjust the contrast of the LCD panel in 5 levels. P.Fn-02: (LCD panel illumination color : Normal shooting) 0:GREEN(Green)，1:ORANGE（Orange） P.Fn-03: ( LCD panel illumination color : Master) 0:GREEN(Green)，1:ORANGE（Orange） P.Fn-04: (LCD panel illumination color : Slave) 0:GREEN(Green)，1:ORANGE（Orange） P.Fn-05: (Diffuser auto detection） 0:AUTO, 1:OFF P.Fn-06: (Wireless button toggle sequence) 0: OFF--> --> 1:OFF<--> 2:OFF<--> -19- Shooting with LED Light Using the LED light 1.Make the flash unit vertical（90°upward bounce） 2.Press the [LED]button， the LED comes on, the LED lighting on the LCD panel. 3.Rotate the [ ]to adjust the brightness. 4.Press the [LED] button again or press the function button[ ]to turning off the LED light. LED Lighting: Brightness:50% Using the LED light with radio wireless master When shoot with LED light, press the function button [MASTER] to keep shooting with LED light and use(the master flash is disable). Using the bulit-in diffuser Using a built-in diffuser reduces glare and softens light. It can also unnatural multiple shadows. Firmly pull the handle of the built-in diffuser down to the bottom of the window and attach it. when storing, pull the handle up into the main body. Using the color conversion filter Using a color conversion filter lets you change t h e c o l o r t e m p e r a t u re t o a b o u t 3 2 0 0 K ( a t maximum brightness) Align the clips on each side of the color conversion filter with the rim of the LED light and press the color conversion fliter on. To remove the color conversion fliter, hold the protrusions on each side and pull it off. The flash cannot fire when the LED light is on. The color temperature varies slightly with brightness adjustments and LED temperature, so check the white balance before recording. Using this flash unit when the subject is too close to the camera may create multiple shadows of the subject. The LED light goes off when the flash head is directed horizontal or downward. -20- Troubleshooting 1 .Power does not turn on or the flash dose not fire. Make sure that the batteries are installed in the correct orientation. Please check if the speedlite is in overheat protection status. lf the electrical contacts of the speedlite and camera are dirty, clean the contacts. 2.The flash automatically shut off the power. Please check if the flash enable the power saving mode or whether the batter y power is enough. 3.Photos are under exposure or over exposure. Check if the set shutter, aperture and ISO are too near the flash limit or if some settings including exposure compensation in relation to flash are proper. 4.Vignetting appears in photos or only part of the subject is illuminated. Please check the current coverage of focal length and make sure if the lens focal length exceeds the coverage range of the flash. The product's zooming range is 20~105 mm of the medium format system. You can tr y to pull out the wide-angle diffuser to expand the flash range. 5.Wireless slave unit doesn't fire. Please check if the mode (YN622 or YN560 mode) of wireless master unit and slave unit are set the same. Different mode settting will lead to abnormal communication. Please set the channel of wireless master unit same as the slave unit, and make sure the wireless slave unit is located in the effective transmission range. 6.The optical slave unit does not fire. Set the master unit to[ ] and[ ](about the master unit please refer to the master unit’s usermanual) and set the slave unit to [ ]and[ ].Set the transmission channel and of the master unit and slave unit to the same numbers. Check that the slave unit is within the transmission range of the master unit. 7.Can not test flash or master flash does not fire. Please check if the LED light is ON. Please press function button [ON/OFF] to check if the master unit is set as disabled. 8.Other problems. Tr y to clear the settings of flash and camera, tr y to disable the flash power source and then restart the flash. -21- Specifications Insulated Gate Bipolar Transistor (IGBT) 60 (ISO 100,105mm) TTL, M, Multi Set-top mode, radio wireless master mode, radio wireless slave mode, wireless optical slave mode (SC,SN,SC&SN,S1,S2) Auto,20,24,28,35,50,70,80,105 Zoom : -7~150 degrees Vertical rotation angle: Horizontal rotation angle: 0~360 degrees 4xAAsize batteries (Alkaline or Ni-MH are usable) Power supply: 100~1500 times (AA alkaline cell used) Lighting times: Approx 3s (AA alkaline cell used) Recycle time: 5600k Flash color temperature: 1/200s~1/20000s Flash time: 8 levels of output control (1/128~1/1), 29 levels Flash control: of fine tuning Hot shoe, PC port External interface: Apporx. 5500K LED Color temperature: Apporx. 300lux(1m) LED luminance: Optical transmission 20~25m indoor, 10~15m out door triggering distance: Radio transmission Up to 100m triggering distance: Master flash, high-speed sync, second-curtain Additional features: sync, FEC, FEB, FVL, the electronic flash head zooming, sound prompt, automatically saving setting, PC port, power saving mode, overheat protection, custom functions (C.Fn), personal functions(P.Fn). 78×60.5×206mm(extended state) Dimensions: 435g Net weight: Speedlite(1)，protecting bag(1)，mini stand Contains items: (1)，color conversion filter for LED light(1)， usermanual（1） Circuit design: Guide No.: Flash mode: Trigger mode: The functions of this user manual are based on test conditions of our company.Further notice will not be given if the design and specifications change. The YONGNUO logo in this manual includes the registered trademark or trademark of Shenzhen Yongnuo Photography E q u i p m e n t C o . , L t d i n C h i n a o r / a n d o t h e r countries(regions).All other trademarks are the property of their respective owners. -22- FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Title : YN968N说明书中英.cdr Create Date : 2018:01:09 09:07:22+08:00 Creator Tool : CorelDRAW Modify Date : 2018:03:21 10:12:10+08:00 Metadata Date : 2018:03:21 10:12:10+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:5435d708-d80a-4410-bcb4-79ef7da0ccf0 Instance ID : uuid:15ccf775-19af-4829-a198-131051deed0f Page Count : 24 Author : AdministratorEXIF Metadata provided by EXIF.tools